Це відео не доступне.
Перепрошуємо.
Vikingbags with Quick Disconnect saddlebag installation Dyna Low Rider
Вставка
- Опубліковано 21 лис 2016
- Full installation of Vikingbag Lamellar extra large with Quick Disconnect system on a Harley-Davidon Dyna Low Rider 2016
very nice. thank you. I have those same bags on my 08 FXDB and just purchased the quick-disconnect kit. now I'm off to the hardware store.
Awesome!
Just got some Viking bags and have been at a standstill for two days with the QDS. Great video and explanation!
Really great job of showing the installation.... I had a 2004 Dyna Low Rider... still miss it!! Going for either a Sport Glide or Anniversary Fat Boy.
Thanks for the feedback! Also, Fat Boy FTW
Sport Glide ma man
Great job explaining and showing how you did it. Viking videos leave a lot to be desired.
Thank you for the feedback!
Great video! The use of the jack and chalk were clever ideas to help with installation. I am thinking of using the quick brackets so your video will be very helpful if I end up going that way.
Thank for the comment! Glad it helped.
well done sir, thank you for sharing. I like the ease of the quick disconnect system and look forward to using this exact set-up on mine.
Thanks! I notice that they vibrate a little and make a some noise at low rpm from time to time, but I think that's expected because quick release systems are not 100% tight.
is the vibration and noise enough that you wouldnt use the quick release brackets or would you use them again
Hi just wondering wich bracket from harley dis u get for the turn signal ?
way better than the official site instructions!
Thanks! I figures I might go through the trial en error if it can help someone else.
Damn fine video, Sir!
Very thorough and easy to understand.
Thanks for the feedback! I hope it helps.
Your Dyna looks amazing! Beautiful and rarer bike indeed!
Thanks! I appreciate it... I switched to retro bags since then, upgraded the bars, raiser, exhaust and air cleaner. I uploaded a few videos uf those upgrades to my other channel, you can see the bike after most of the upgrades here:
ua-cam.com/video/kBTX7BNq7C8/v-deo.html
Your video is like a 1000 times better than what viking made 😂🤘
Wow, thanks a lot. You made my day.
I just put some on my dyna street bob using the quick release bracket and they rattle like crazy. the bags are solid, but rattle like crazy. I'm gonna try some rubber grommets and see if they fix the rattle.
I hear you! My rattled at idle, that's why I ended up selling them I got a pair of Retro bags. I know those retro ones don't look good on all bikes, but fortunately, they work for me.
GREAT! WELL PACED, CRYSTAL CLEAR VIDEO... thank you!
That's for the feedback! 🤜🤛
Good video...question...are you using the quick connect system from Viking? You have the shock cut-out bags, and I thought the Viking quick connect system was not compatible with shock cut-out bags.
.
Excellent video, Juan, thanks
Thank you for the comment 🤜🤛
Really good video
Thanks for the comment! made my day 🤜🤛
Beautiful bike, great video !!!
🤜🤛
Nice! Think you could add a quick detach sissy bar to that setup?
Thanks for the info. I just got my kit and there is no way to install it with the supplied hardware. At least not without having a bolt in your tire or being able to lock it. Kind of ridiculous that they offer a bike specific kit that doesn't have the bolts to fit my bike.
I know, that's why I took the time me figure out what works. They should be ready to go from factory.
Profitional job with pervect man...
They look sick !!
Thanks! I ended up switching them for a pair of Conely's
Good video and fine job with explaining the process and parts! Wondering ... how much further out (in your opinion) do the bags extend than if you hard mounted them? I ask because I bought bags with the shock cut out for my honda vtx 1300C because I wanted a sleek look. Kevin
Thanks for the comnent Kevin! the quick disconnect system might extend them just about 1 inch or so. It's not much but you'll definitely see a gap. Just and FYI, I sold those Vickingbags and got he a pair of Conely's Retro bag, although I wish I went with Leather Pros.
@@JuanderBoy appreciate the prompt reply. happy riding!
You think quick disconnect would work on my sportster 1200 Vikingbag? When I talked to a biking bag they told me that 1200 wouldn’t work because of the shock cutout. Ur seems to work. What u think
can you use the quick disconnect system in conjunction with a quick disconnect sissy bar from harley?
Yes, the connectors have the grooves so you can install both Bags and Sissy Bar.
Do you think Viking bags are worth the money ? There’s not many bags out there that look good with the lines on our bikes except Viking
Besides the occasional rattling on idle, I was very happy with the bags. Plenty of room, easy open/close and lock system, and like you said, they look good on the dynas. Very practical... Although, I ended up selling them (they hold some value) and getting the Connelly's just for aesthetics, but... I would have gone with LeatherPros if I knew about them first.
I hope that helps.
Thanks for the video. My questions are can we use the Harley docking hardware for the sissybar and add the Viking docking as well or I can’t have my sissybar with this Viking quick disconnects?
Yes you can, I had them both!
the quick release kit will only last four to five years... hopefully yours lasted longer
question on the back docking post. Where did you purchase the special washer that covers the area where the turn signals were?
I found those at the Harley Dealer. I think a quick Google search can give you a few options too
O I just noticed my bike's back docking post does not go through the turn signal area...softail
Good man, great clear video!
Niall Murray Thanks for the feedback. I hope it helps.
This is the best video I’ve seen installing the quick disconnect and Viking Bags - fantastic stuff. I’m doing the same thing but on an ‘07 Sportster 1200. Where did you get the flat egg shape pieces for where the turn signals used to be? Do you have a link you could send me for that?
Thanks! I appreciate the feedback.
I believe I got those egg shape cover at the Harley dealer, but a quick google search will pop a few options, like this one:
www.denniskirk.com/cycle-visions/black-rear-turn-signal-cover-plates-cv4813b.p2101301.prd/2101301.sku?aid=76472566741&keyword=828751824423%3A%3Apla-828751824423&kid=828751824423&gclid=CjwKCAjwltH3BRB6EiwAhj0IUOgD-_41AFwFMg0Nt6sgQ9vCSGtkJ82W3b_g_m6tkBgLwR65VXTX1hoCZSoQAvD_BwE
@@JuanderBoy I had called my local Harley dealer, but they did not have a replacement for that area. I had no idea what to call it besides egg-shaped washer. Just placed an order for it through your link - thank you very much!!
@@CrashingKites That awesome! Glad to help.
Do you regret going with the extra large bags? I am worried they will look too big and bulky on my softail.
Softail is big enough, I'm pretty sure the bags will look fine. Although, I ended up switching from the Viking Bags to Conely's Retro bags. Mostly because of looks, but the Vikings used to rattle a little at idle.
Here's the ones I went with, on my other channel:
ua-cam.com/video/TBKDEuwHyUs/v-deo.html
JuanderBoyMusic yikes! I definitely do not like the look of those Conely’s. Lol
@@beri232 hahaha, I hear you, specially on a softail.
Looks great
Good job I love it
Thanks!
Do you have any issues with shock cutout bags and quick disconnect system?
Easy to install?
Does it fits?
No issues, just a bit of rattling on idle.
How have the bags held up since the install? Can you do a review video outlining likes and dislikes since you have been using them?
Hi Kevin, I actually sold the bags after a couple of months. They rattled a little on iddle. I liked the size and how easy they were to use, but the look didn't convinced me completely.
Hi JuanderBoy - can you tell me where you got the special washer to cover where the turn signals were? I have used the HD relocation kit and now have an ugly space. Your video is really good. It made the process very easy. I had to use one of the supplied spacers on the bolt closest to the indicators, in order for the quick disconnect system to fit easier. Thanks Aidan
Mr A McCanny thanks for the feedback Aidan, I really appreciate it. I got those washers at the local HD dealer. If I remember correctly they came with the relocation kit. Like I said in the video I disregarded the kit that comes with the bags in used and original Harley-Davidson relocation kit. I am pretty sure they sell them separate though.
Knowing that the video help even a little bit makes my day.
Cheers - The washers I got with the relocation kit were needed for the indicators themselves. I have managed to source the "Rear Turn Signal Plate Covers" from another company. Unfortunately, coming from Ireland, we don't have the same range of accessories! Keep up the good work!
Aidan
Mr A McCanny By the way, I opened another channel and added a few videos with more upgrades on the FXDL. Exhaust, lights, new bags, etc.
ua-cam.com/channels/2IWKgb-XM3w0FJXDbpcVzQ.html
Great video and very well done sir. Very informative. Thanks for taking the time to list the bolt sizes as well. Beautiful bike. Do you still have these bags and how well have they held up? This video seals the deal for me. These will look great on my Fat Boy!
Gordon Steel Thanks for the feedback, I'm glad the video helped.
The bags will look great on a Fat Boy. The look on the dyna didn't convince me 100% so I ended up switching to Conely's Retro Bags. What a nightmare that was, they hit the frame and it took a few months to get them to work. I should've gone with LeatherPro.
As far a quality and performance I doubt you're gonna get a better bang for your buck than with Vikings Bags. Besides the occasional rattling at idle because of the quick release system they held up just fine.
What I like the most besides the size was how easy it was to get things in and out. Oh, and their customer service is second to none.
Thank you...thank you...thank you! I bought viking bags and the quick disconnect kit and I'm having the hardest time following the installation instructions and terrible video they made. Plus, as you mentioned, the bolts supplied with the kit are way to long. I chatted with Viking support and told him I have a 2010 Dyna Super Glide Custom and the bolts they gave are wrong. The moron tells me that its not compatible with the super glide custom, only the super glide. Seriously?!?! It's the same bike with a few extra options. He obviously has no clue about Harleys. He proceeded to say "I'm sorry for any inconvenience". Inconvenience? How about supplying the right hardware for the kit! For $450 (bags and quick disconnect), I expected better customer service.
Anyway... did you jack your bike up and remove the bottom shock bolts to drop the swing arm in order to remove the super long turn signal bolt?
Thanks for the feedback!
I threw away the turn signa relocation kit that came with the bag and got one from HD. I didn't have to deal with the swing arm at all. Hope that helps.
@@JuanderBoyMusic I installed the turn signal kit that came with the bags. It looked terrible! I can't believe they even bother giving it away. I ordered the Easy Brackets Turn Signal Relocation Kit from JP Cycles. Looks so much better! In regards to the bolt that I mentioned in my original post, it's the original turn signal bolt that I couldn't remove because it hit the tire. To remedy the issue, I cut off the bolt with big bolt cutters.
Do you have the part number for the blanking plate that covers the holes where the turn signals used to be on the fender?
@@kevinbrown3150 Oh, I understand. Mine didn't hit the tire.
For the little plate cover just google "dyna turn signal hole cover". You'll see some legit sites like Revzilla, and J&P.
@@JuanderBoyMusic Thanks! I can't believe they charge $27 for 2 small metal plates and 2 screws. Highway Robbery! Have no choice but to give in and buy it. :(
Can you list the hardware you used??
Do you mean the tools? of the actual nuts and bolts sizes? Those are in the video, I took shots of the bags with all the specs. Thanks for the comment.
buen video juanderboy
or you could just cut the bolts that came with the kit and save time and money🤔
Not sure how much time you'll save having to cut all of the bolts one by one. Money wise, I'm with you, but those are relatively inexpensive, specially after you dropped some mayor bucks for the bags.
I appreciate the comment.
JuanderBoy it take about 3 min max ..but oddly the viking bag comes with 3 different bolt length sizes one size being ..
JuanderBoy takes about 4-5 mins tops cut all 4 bolts ..the kit comes with 3 different bolt lengths ..only thing I didn't like was my kit came with no small washers all where rather large in size diameter. the 2 different size spacers they also included worked great as well for my application.
@@RanGer-498 Do you sell bolts to vikingbags? lol
JuanderBoy nope but I have some for sale. ..you want to buy some😂😂😂😂
Viking bags hardware freaking sucks currently going to go buy all new hardware either the bolts they sent me are cheap junk or they are way too long to where they will be hitting my tires
Yep! That's why I tossed them all.