Ventrac Tough Cut Mows Down Overgrown Creek Bottom Overflow - Didn't Know What to Expect on This One
Вставка
- Опубліковано 18 лют 2024
- Ventrac Tough Cut Mows Down an Overgrown Creek Bottom Overflow - Didn't know what to expect mowing down this overgrown mess. I thought it would be a pretty wet area to get into, but knew the Ventrac was up for the challenge. Kick back, relax, and watch the Tough Cut eat because it's Lunch Time for the Ventrac!
Affiliate Links Below
Lawn Care CRM that I use in my lawn care business:
horizon360software.toro.com/m...
Want a pair of glasses like I'm wearing the video? Check them out here:
www.amazon.com/live/video/09e...
Headphones that I use:
www.amazon.com/dp/B01LZTFC8O?... - Розваги
I continues to be amazed. It goes places most wouldn’t dare. Doesn’t get stuck, doesn’t rut things up. Really fun to watch
💯% truth! Unbelievable the places you can take this machine without even leaving a trace behind. Except for the overgrown brush that's no longer there! Appreciate you taking time to watch. 👍
Hello Cameron! I never tire of seeing the Ventrac Tough Cut in action! Take care and God Bless. 😊
I always look forward to your comments. Always positive and supportive. Thanks so much. I really appreciate it. #GodProvides☝️
Absolutely Amazing!! That tough cut just plowed through all of it with ease. Great video. Thank you for sharing 😀
Ohhhhh yeah. The Tough Cut is no joke! Definitely a good lunch time snack for the Ventrac! 🤠
Cameron, awesome job brother, thanks for sharing! Louisiana sending prayers and positive vibes for you and your family! 🙏🏻🙏🏻🙏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👌🏻👌🏻👍🏻👍🏻👍🏻🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸
Thanks for tuning in from Louisiana! I appreciate the support. This was a fun one to tackle. Too easy for the Ventrac though. 👍😎💯
If this guy doesn't get a percentage from Ventrac, I would be surprised.
Living in Ohio for the last thirty plus years, and never heard of Central until I seen these videos.
Go figure.
What a salesman.
You go, Cameron.
If you would like to pass this on to Ventrac, that would be great! I wouldn’t mind at all. I appreciate you taking the time to watch. The Ventrac is one cool machine. 😎
Awesome video! Endless possibilities utilizing the Ventrac!!
Thanks for watching! Absolutely, so many possibilities with the Ventrac. Love running that machine!
Hey Cam, another riveting video, more power to the solo contractor, as always, go hard bud.
Appreciate it! This Ventrac has really taken my solo business to the next level. A lot easier to let the machine do all of the work. 😎
A small electric chainsaw with an accessory mount on the rops would be real handy. Great job!
I’ve been wanting to get an accessory mount for the ROPS! I do carry my Toro, 60 V chainsaw in the truck for the situations. Works really well! I need to look into getting a chainsaw Mount for this season. Appreciate you watching!
Rewatched! I need more my brother! Love your channel, content, and your usage of the Ventrac!
Thanks for rewatching! Can't get enough of the Ventrac out in the wild. The machine is something else. Appreciate the continued support. 💯
The weather has been bad here also, you the man!
Thanks a lot! Appreciate you turning in.
a great job
Nice looking paddock too
Thank you! Really nice property out there. So peaceful!
You did a great job….id give you a bonus if it were my land.
I appreciate the BONUS! 🤠💯👍
Hi Mistur Cameron this is very cool for me to see and my dad seanslawns is watching with me and I told him you are in MOWZURRY and it looks very cool byeeeee oh and my dad says hi and very good job
Love these types of jobs. It’s the easiest way to show off the quality we are capable of
Absolutely! A big tractor and bush hog would have made a mess on this one. But the Ventrac gets in, gets it done, and gets back out without leaving a trace.
You did a wonderful job
Thank you so much. I really appreciate that. 👍💯😎
Great job as always
Thank you!
Man that looks great 👍🏻
Thank you! I appreciate it. 👍
amen...tending the garden
that's right! 🤠
Nom, nom, nom! 👍🏻🤙
😎👍💯
So satisfying!
Thanks for watching!
Looks great to me it really performed well I would love to have a Ventrac Tough Cut
I appreciate it. It really slicked it down nice! The Ventrac and Tough Cut is by far my favorite combo! 😎
Another great job.
I appreciate that! The Ventrac makes it easy.
I felt for sure you would get stuck, sorry! Great job, I should have had more faith.
haha...I really didn't know what to expect going into it. I didn't walk the property and really check it out. I just unloaded and got started. It could have turned out a little different if conditions were worse. Thanks for taking time to watch. I really appreciate it.
Works Excellent
Ohhhhh yeah. FUN machine!
Looks great!
Appreciate it!
Good job Cameron , want be long you'll be back on the zero turns . 😂
Hopefully I have more excuses to run the Ventrac this Spring lol 🤠
Came out great.
Thank you!
Looks great
Thank you!!!! 👍👍👍
Great job 👊🏻
Thanks man. Appreciate you watching.
this thing is amazing
A b s o l u t e l y ! ! ! Unbelievable what this machine can do. Appreciate you watching.
Looks good
Thanks!
That's looking really nice after the tuff cut... Do they keep livestock in the pasture?? Press on in the good work sir 👍
Thank you! They do have cattle on this property, but they rarely get down to this area of the farm. At least from what I could tell. Appreciate the support! 💯
Fantastic job
Thanks a lot!
Wow grate job.
Thank you! 👍
Rewatched! What's up my friend, I need some more content from you.... It's been too long sir!
It has been TOO long! More vids coming. Been a lot going on right now before the Spring rush hits. Stay tuned…
Great video , amazing, my only question is how do you keep thorns from taking out your tires?
Good question. I have a product in my tires called TyrFill from Carlisle. It has Kevlar in it and it can withstand a lot! Thanks for watching! 👍
Awesome!❤
Thanks a lot! 👍😎💯
You are thw MAN! Love the channel and the content! Another great video with the Ventrac! I always see you by yourself on theae projects, do you work alone? Impressive either way! You do great work and your attwntion to detail is exceptional! I need more! Thanks for sharing!
Hey Aaron! Appreciate the continued support! That was a fun one to get into with the Ventrac. The briars are always a challenge with the open cab, but thankfully there weren't too many of them to tackle. Really a fun job with a quick transformation. For the most part, I'm a one man show. I've had help here and there in the past, but I do the majority of the work myself. One of the reasons I decided to go with the Ventrac. You can tackle some pretty big jobs by yourself and make some decent money as well. Thanks again for taking the time to watch. I appreciate you!
@@TheLawnCareLifeinMowssouri thanks for the response, I'm a fan and you are the best!
Hi again Cameron. Love the videos I can never get tired of watching your content.i mow lawns also. Been doing it dince a kid.also where do u get your eye protection (glasses) from.
Thanks for the support. I really appreciate it. What kinda mower are you using? I should have a link to the glasses in the description to the video. They work really well keeping all the dust/dirt/debris out of your 👀
I have walked behind mowers Exmark tracers 48 inch 52
I can't find your link to your safety glasses
💚👍👍👍
Thank you! 👍😎💯
👌🏻
Thanks! 👍
Cameron, how often do you sharpen the blades on your Ventrac? As usual, I am enjoying your videos.
Thank you for the continued support. I really appreciate it. I don't sharpen the blades nearly as often as you would think. Especially if I'm just cutting thick overgrown grass and some really small saplings/brush. If I get into the thicker stuff, I'll sharpen them after about 15 hours or so.
@@TheLawnCareLifeinMowssouri
Thank you, Cameron.
Hey Cameron, I love your content, your spirit, and love for God. We have spoken before ans I am in the midst of making a big life changing decision about my business in lawn care and need advice asap! It is about moving from a not so good lawn care market in Mississippi to a exceptional lawn care market in Frisco Texas, North of Dallas. I need advice ASAP, because I have to make decision now. I trust your opinion and advice in the industry and would appreciate your incite, opinion, or advice. Thank you Chad Rowe, Red Rock Lawn Care
Hey Chad, hope all is well man. I think lawn care is one of those industries where you can thrive in any market. You just have to know your market and who you are going to target. There's money to be made, there's customers to take care of, there's problems that need to be solved. Lots of opportunities in lawn care no matter where you live. Sometimes you half to just get a little creative and find ways to make it work. Trust in God, seek HIM, and know that He will Provide each and every day!
I call them Cat claw briars not sure what they are called in Missouri. They are some tuff SOB'S 😂
That’s exactly what they are-cat claws! It’s rough when you go into a patch and you have them on either side. I try to hit them from one side or the other if I can. Thank you for watching!
I really enjoy these wooded-but-tamed properties. If I was the land owner, I would have left a bit more growth along some of the creek area so that it looked more like a creek and less like a drainage ditch, but I'm not so who cares :) Awesome job!
He was ready to clean it up and slick it down 🤠. He has lots of creek bottom on this property that is untouched though. This was just a little overflow area off the main creek. Appreciate the continued support. More vids coming...
How many inches do you mow at? I was doing 3 inches with my tough cut but had to raise it to 6” we grow rocks in Vermont and I’ve nearly blown up the tough cut multiple times mowing very high overgrown fields. I’ve been walking in front while my dad runs the machine spotting for many acres. I’m severely undercharging I think but just getting going. Any tips/tricks? Up here most use tractors with rear brush hogs putting the front bucket low and in front to spot for rocks. I’ve had to already replace a set of blades and two belts in about 7 jobs….almost thinking brushhog/tough cut isn’t worth it for me here. Barely getting 100.00 per hour most people won’t pay that here…love the blower, power rake broom and bucket. Stump grinder is next.
Usually put it all the way down to 3" UNLESS I'm tackling a rock farm lol. Then I'll bump it up so it scoots across and doesn't damage the machine. I've hit a lot of rocks over the many many hours I've put on the Tough Cut, but surprisingly haven't done much damage to it. I would focus on the smaller jobs where a big tractor/bush hog can't go. I tend to make more money per hour on the smaller jobs UNLESS it's a bigger job that's too steep or too wet for a big tractor/bush hog. You really have to go after that niche market if you have a lot of ppl in your area doing bush hog work dirt cheap still. Focus on detention areas, ponds, lakes, dams, steep hillsides or small narrow areas, maybe areas that are low and stay wet. Market to those different jobs where the Ventrac will outperform any other machine. I'm looking at getting stump grinder, flail, and new loader down the road. One attachment at a time though. 😃
@@TheLawnCareLifeinMowssouri ok thanks, yeah no way I could do 3 inches here anymore. I try to bump it out of float fast enough but damage has been done so I’ve been killing the pto now instead of trying to jam it out of float and off the rock. We have big hilly rocky swampy lands here just not sure it’s worth it. I’ll give it another season keep the attachment just incase but it’s difficult. Love your videos, I’d like to start making more videos but it’s hard solo with a full time job and my small business on the side. Just trying to get the specialty jobs though driveways etc. I do well in the spring with the broom attachment for winter clean ups might target that, driveways and fall clean ups but would like to use the tough cut in the summer. Some jobs pay others people cringe at the price.
Hey Cambrin great job bud , I have a question for ya is that tough cut the same thing as a flail mower deck.
Thanks a lot! The Tough Cut deck that I'm running is different than the flail mower deck. The Tough Cut is really made for the smaller saplings. There are 2 different flail mower decks out right now; Fast Cut and Fine Cut. The flail mower decks are designed to leave a cleaner cut, but they can't handle the thicker saplings like the Tough Cut. Hope that helps!
Ok thank you Cameron that's what I was wondering.
@@ryanfoley9999 no problem! Thanks again for watching.
👍👍👍👍😁❤️❤️❤️❤️❤️
Thank you! Appreciate you tuning in 👍
What brand of tire sealer do yoy use ?
It’s called Carlisle TyreFill
Farai vedere Ancora il tosaerba con intelligenza artificiale autogestito .maravigliglioso che marca e'?
Thanks for watching!