It's a hybrid pit bike/downhill mountain bike - there's a jack shaft which changes the drive side over from the left to the right to be compatible with the mountain bike hub/disk brakes on the rear wheel. The bike is a Motoped, I have a few other videos and they have a website too.
It's a "Motoped", cant post the link to their website, but if you search on google for motopeds the first result is their site. There are a few videos on UA-cam about them too, some mine, a few from the maker and a couple from a distributor.
It's a breather for the crankcase. When the Piston moves up and down it would also compress the air in the crankcase without one. A pressurized crankcase would lead to leaks and also present unnecessary resistance to the Piston.
That looks like your still using a 1" exhaust on that, going up to a 140 you should go up to a 1 1/8" pipe and a straight thru muffler, you'll get alot more performance out of that motor - would be noisier though.
Nick Usher The main issue is the poor documentation that you get (if any) with some of them. Keep track of the parts, I use partitioned trays and label each tray as I put stuff in it - where it came from etc. I also take video for youtube - but if I didnt I'd take photo's of each part as it came off so I'd have something to refer to. If you cant find torque/other specs then either look up the generic torque spec for that size bolt or buy download the Z50/CRF50 service manual and use those. Good luck !
Hey, i just ddid my swap and i put a brand new pinanha 140 into my ssr, whats the deal with these reasr clutches. Mine doesnt work at all. When i pull it in while in gear the bike wont roll at all....is there something i have to do to it? I dont have a bolt on the top of the clutch arm like some bikes, so i dont even know how to check into it
Sven Jonkers Thats just a crank case breather tube, it doesn't connect to anything. It lets air out of the crankcase when the piston is in a downstroke, otherwise it would get pressurized and blow gaskets. There may or may not be a little metal clip for it to pass through that just keeps in place pointed down.
Hey what was that rubber piece that went between the carb and the neck I'm trying to find one but can't. do you know the name of it or were you got it?
Recording audio as I record the video made the editing process more difficult as I then have to take into account the audio & the video and make sure they made sense (couldn't cut a scene if I was still talking and couldn't re arrange scenes, re shooting a part if I dropped a wrench etc is more difficult etc) I tried recording audio during the editing process, I'd have to do multiple attempts to get it right and wasn't worth it. Some people are good at that, I'm not one of them unfortunately.
Nick Pepper www.ebay.com/i/292922363463?chn=ps&ul_ref=https%253A%252F%252Frover.ebay.com%252Frover%252F1%252F711-117182-37290-0%252F2%253Fmpre%253Dhttps%25253A%25252F%25252Fwww.ebay.com%25252Fi%25252F292922363463%25253Fchn%25253Dps%2526itemid%253D292922363463%2526targetid%253D474173583789%2526device%253Dm%2526adtype%253Dpla%2526googleloc%253D9007218%2526poi%253D%2526campaignid%253D1669934831%2526adgroupid%253D65058350299%2526rlsatarget%253Dpla-474173583789%2526abcId%253D1139296%2526merchantid%253D108421835%2526gclid%253DCj0KCQjw19DlBRCSARIsAOnfRejLzsbY6kmKytA1ZfYTkozjDrk1z9Mireu_r1ceYrwb0BgXXREu2I4aAnHyEALw_wcB%2526srcrot%253D711-117182-37290-0%2526rvr_id%253D1935601852123%2526rvr_ts%253D22d0e8dc16a0ac1e7d718d86ffad895c
POSSIBLY MATE I HAD AN ORION MYSELF...THIERS ONLY ONE WAY TO FIND OUT !...IM BUSY CUSTOMISING MY NEW PIT NOW...GOT SOME VIDS ON MY CHANNEL IVE JUST STARTED...MORE PROJECTS COMING SOON...FEEL FREE TO CHECK IT OUT AND/OR SUBSCRIBE.
Friend I am Brazilian I saw your video I liked it a lot here we have a motorcycle of 100cc and parese muinto with this engine agore I answer this engine and 100cc or 140 cc here I will only make it to 125cc honda I have a pop100 here in brazil
Do you know if the electric start version fixed the same way? tboltusa.com/store/piranha-140cc-bottom-electric-start-semi-auto-start-engine-p-10616.html
2 tips, 1, use threadlock on vital screws that are going to vibrate out, like the bwtween the manifold and the head. use nylon lock nuts on the exhaust (No, not the kind that melts, use the good kind) i woulnt class that bike as "ugly" but... odd maby :P
I had just about given up on finding a video where someone just performs the task at hand without endless rambling. good job, thanks.
Definitely saving this video for when I do my swap. Steady camera, and really easy to follow, even without saying anything. Thanks!
Cheers for taking the time to make this series and post...
It's a hybrid pit bike/downhill mountain bike - there's a jack shaft which changes the drive side over from the left to the right to be compatible with the mountain bike hub/disk brakes on the rear wheel. The bike is a Motoped, I have a few other videos and they have a website too.
yeah mate i really do like your bike i like the wheels they look like mountain bike wheels are they?
It's a "Motoped", cant post the link to their website, but if you search on google for motopeds the first result is their site.
There are a few videos on UA-cam about them too, some mine, a few from the maker and a couple from a distributor.
your camera quality is great?😅for 2012
Why would it matter if it's from 2012? I don't get it you act like cameras were bad only 8 years ago when they're exactly same quality they are now
Who loves this hobby
That is such an amazing bike, great job man, respect.
Is this the same for all engines? Like 110 125cc
Haseeb pretty much, all pitbike engines are hasically the same
What is the black hose thing you tucked away at 2:14. Do you know its name or its purpose?
It's a breather for the crankcase. When the Piston moves up and down it would also compress the air in the crankcase without one. A pressurized crankcase would lead to leaks and also present unnecessary resistance to the Piston.
Thanks for the fast reply.Would you know if I could attach a fuel pump to that hose and use it as the vaccum line?
That looks like your still using a 1" exhaust on that, going up to a 140 you should go up to a 1 1/8" pipe and a straight thru muffler, you'll get alot more performance out of that motor - would be noisier though.
Sweet sound man! Good Job!
Are you going to do a video of this in action with the 140?
camgroundpiston country
Country
Country
What does the black hose that comes out the engine do?
I'm doing a pit bike project at the minute and I was just wondering if there is anything that I should know about as a heads up?
Nick Usher The main issue is the poor documentation that you get (if any) with some of them. Keep track of the parts, I use partitioned trays and label each tray as I put stuff in it - where it came from etc. I also take video for youtube - but if I didnt I'd take photo's of each part as it came off so I'd have something to refer to. If you cant find torque/other specs then either look up the generic torque spec for that size bolt or buy download the Z50/CRF50 service manual and use those. Good luck !
you double chained it. man how did you double chain it.
Hey, i just ddid my swap and i put a brand new pinanha 140 into my ssr, whats the deal with these reasr clutches. Mine doesnt work at all. When i pull it in while in gear the bike wont roll at all....is there something i have to do to it? I dont have a bolt on the top of the clutch arm like some bikes, so i dont even know how to check into it
Very cool build
What is the little black tube for that you tug away in the frame @ 2:14?
Does is carry oil and where does it plug in to?
Thx
Sven Jonkers Thats just a crank case breather tube, it doesn't connect to anything. It lets air out of the crankcase when the piston is in a downstroke, otherwise it would get pressurized and blow gaskets. There may or may not be a little metal clip for it to pass through that just keeps in place pointed down.
thx man
14:15 what is that hole on the cylinder bit cos i've got it on my pit bike is it broken??
It's a mount for a skid plate.
n1bpd so it's meant to be there
Yes
This is a good video, im subbing without you having said a word
Yup, I'm still breaking it in - once that's done I will post a video. It wont be a good show tho as I'm not that good a rider.
I left it on Auto Focus instead of switching it to Manual. So instead of it being in focus on the Motor like I wanted, it kept trying to focus on me.
this engine can be fitted to a small motorbike,can it?also...how much horsepower u get?
Thanks man this video really helping me out with my bike cheers fella
can i ask why you dont talk in your videos but i still like to watch them
Hey what was that rubber piece that went between the carb and the neck I'm trying to find one but can't. do you know the name of it or were you got it?
21chicken 21chicken intake manifold
Then can I use the vent line as a vaccum line for a fuel pump?
No, because its sometimes positive and sometimes negative pressure as the Piston moves up and down.
ok thanks so then ill run a suction line out of the intake manifold thanks
Where in the harness do i wire in my kill switch? I made the 3 connections and am left with the yellow lighting wires and 1 black?
Try grounding one lead of the kill switch and connect the other to the left over black wire.
Will a gpx160 bolt on?
Bike 124 cc kaha se malls GI Bahi jaan
those are some damn nice welds, i must admit.
most importantly can it lay rubber and can it do wheelies .
Recording audio as I record the video made the editing process more difficult as I then have to take into account the audio & the video and make sure they made sense (couldn't cut a scene if I was still talking and couldn't re arrange scenes, re shooting a part if I dropped a wrench etc is more difficult etc)
I tried recording audio during the editing process, I'd have to do multiple attempts to get it right and wasn't worth it.
Some people are good at that, I'm not one of them unfortunately.
what site did you buy the engine on
What the black rupper piece you put on to the intake where the carb connects
Nick Pepper
www.ebay.com/i/292922363463?chn=ps&ul_ref=https%253A%252F%252Frover.ebay.com%252Frover%252F1%252F711-117182-37290-0%252F2%253Fmpre%253Dhttps%25253A%25252F%25252Fwww.ebay.com%25252Fi%25252F292922363463%25253Fchn%25253Dps%2526itemid%253D292922363463%2526targetid%253D474173583789%2526device%253Dm%2526adtype%253Dpla%2526googleloc%253D9007218%2526poi%253D%2526campaignid%253D1669934831%2526adgroupid%253D65058350299%2526rlsatarget%253Dpla-474173583789%2526abcId%253D1139296%2526merchantid%253D108421835%2526gclid%253DCj0KCQjw19DlBRCSARIsAOnfRejLzsbY6kmKytA1ZfYTkozjDrk1z9Mireu_r1ceYrwb0BgXXREu2I4aAnHyEALw_wcB%2526srcrot%253D711-117182-37290-0%2526rvr_id%253D1935601852123%2526rvr_ts%253D22d0e8dc16a0ac1e7d718d86ffad895c
can i swap my apollo orion 125cc dirt bike engine into a 190cc piranha engine?
POSSIBLY MATE I HAD AN ORION MYSELF...THIERS ONLY ONE WAY TO FIND OUT !...IM BUSY CUSTOMISING MY NEW PIT NOW...GOT SOME VIDS ON MY CHANNEL IVE JUST STARTED...MORE PROJECTS COMING SOON...FEEL FREE TO CHECK IT OUT AND/OR SUBSCRIBE.
hey what kind of bike is that and were can i find one and were can i buy one
What's the top speed of the engine
Is that VM24 carb?
What clutch cable did u use
Stator cover gasket part #????
In surprised motopeds arent way more popular than they are.they are way cool and practical
Friend I am Brazilian I saw your video I liked it a lot here we have a motorcycle of 100cc and parese muinto with this engine agore I answer this engine and 100cc or 140 cc here I will only make it to 125cc honda I have a pop100 here in brazil
Do you know if the electric start version fixed the same way? tboltusa.com/store/piranha-140cc-bottom-electric-start-semi-auto-start-engine-p-10616.html
Fue de gran ayuda para mi tu video
Gracias
Sou do Brasil onde compro esse motor??
It's the vm26 (vm26-606)
2 tips,
1, use threadlock on vital screws that are going to vibrate out, like the bwtween the manifold and the head.
use nylon lock nuts on the exhaust (No, not the kind that melts, use the good kind)
i woulnt class that bike as "ugly" but... odd maby :P
esse motor e 140cc ou 100cc
Compre un piranha 150cc eléctric start
Que carburador le puedo poner
Es para mi sachs madass
nice I want the 160cc
They are mountain bike wheels, check out motopeds dot com
What’s the price of that engine
tboltusa.com/store/piranha-140cc-engine-br-fits-pit-bikes-and-other-minis-p-660.html
👍👍🥰🥰🥰♥️♥️♥️
este men usa llave tuvos nomas._.
ok
ban lam rat ky
I do not know how to speak your language, I used the translator, if you talk to me, you put my name in the front.
That's a fucking bike
at 2.20 why is ur camera fucking around???
Those have to be the gayest pair of mechanics gloves I've seen someone wear.lol...
Can i use my 125cc electric starter on this motor?
They make versions of this motor with kick start or electric start, check out what tboltusa.com has to offer.