I searched on youtube videos about making various dowels and found easier methods day by day, but i think yours is the climax of my search. Thank you for sharing my friend..regards from Indonesia.
Finished mine and made some 5/16th, 3/8, and 1/2 inch dowels from oak stock and all of them turned out great! No need for buying high priced hardwood dowels anymore!! Could not be happier with it. Did add a guard onto the back end to prevent any "biting"
Hi guys, now you can make calibrated dowels The idea of this jig i found here, just a little modified it: ua-cam.com/video/W1n6IRxsZow/v-deo.html&t All free plans I ever made are here: drive.google.com/drive/folders/1636_O_7KVQ5hzWAhDXBornWnvxXfweba?usp=sharing GRINwood shop: www.etsy.com/shop/GRINwood Support GRINwood: PayPal: grinwooddesigns@gmail.com Thanks for watching
Tried to download the plan's but each time I have tried it failed. Upon the screen it saying...unable to download the file..there was a problem with the network!!!. Any suggestions on getting around this problem??? 👍🇬🇧
Made a bunch of quarter inch dowels today with the jig. They are more finicky then the 3/8" dowels. I found the smaller stock size would splinter if I tried to pull the part that was in the drill chuck like I did with the 3/8" dowels. The quarter inch dowels wouldn't take the stress as well. I just cut off the square part. Worked very well once I got it dialed in. I did make a extra set of blocks as my first set had shifted and went back to just a 3/8" starter hole to the quarter inch out hole. The tolerance with the quarter inch dowels is much more picky. I went from having a few store bought dowels to having over a hundred just using my scrap oak, maple, cedar, walnut. The oak gave me the most trouble in the smaller size of dowel. GREAT JIG!
I can't improve upon the comments that are already here, just like I can't improve anything about your dowel device. The fit and finish are second to none. There are a lot of great ideas here on UA-cam, but few demonstrate the skills you've shown. Very nice. This could be a real money maker for anyone willing to make dowels. Quality dowels "Not Be Cheap!" They are hard to find and seldom come in a variety of woods. Plus, chucking a drill onto the finished end would allow you to finish each dowel by pulling the final few inches through... Worth it instead of just cutting off the square end? IDK... Just a thought. Just a little less waste.
Thought this was a great design and built it, inititially dowels were coming out undersized. Realized that when I marked the high point of my blade, it was in the full up position. Later when using the jig to make dowels, the blade was lower. My saw pivots when raising the blade so the high point was actually further back. Once I adjusted the mark on fence to correspond to the new peak worked like a champ. Apprec I ate you sharing the design.
Esto es sencillamente EXCELENTE, como bien dice otro usuario, este es quizás el Mejor, The Best método para hacer bolillos. Está será mi siguiente tarea. Gracias por compartir tan magnífica idea.
Very easy to make! Perfect result! I've watched a lot of videos and this is the best dowel making device I've ever seen. So far I have used a metal plate with matching holes. Now I`ll make this dowel maker. THANK YOU VERY MUCH for such a detailed video.
Need to make a fair number of long dowels 16 and 20mm and out of all the dowel making videos this one seems to be the one I need. Thanks for sharing. Andy UK
Как мне нравится смотреть на все такие столярные работы.))) Я и делатть люблю и креативить. Единственное что не люблю, так это видео монтажём потом заниматься. ))))))
Это тот самый момент, когда на приспособление тратится больше времени, чем на саму работу - и это правильно! Ещё бы стружкоудаление сверху провести - будет вообще круто! С меня лайк за идею, воплощение и работоспособность! =)
Ваня, при помощи простой лерки нужного тебе диаметра, вставленной в плашку, и зажатую в тиски ты сделаешь тоже самое. И никакой головной боли с изготовлением всяких не нужных " приспособ". Старинный дедовский метод , кстати.
I'm. Attempting. TODAY!. The other jigs where you pound the dowel through metal or even chuck it up to drill are just a royal pain. Too much effort for one stinking 4" dowel. THANK YOU! Hope I can make mine as precise as yours.
Thank you very much for showing this! I had already created a very 'no nonsense' dowel jig what was working (without the tablesaw), but i kept thinking about one with the tablesaw, came across your video and decided to make it tonight. I did change some things (because that made it easier for me: - i did not do your thing with the bolds and wing nut-thingy, i just uses a screw that i can turn in and out (filed the tip of a little) That saved me a lot of time and i believe it works as well. Ah, and i had to make the jig to understand why you created the part at 3:07, i thought you used it to make it easier to insert the long stick, but it had a different (better) reason ;-) I made it tonight, and tried it on one (i only created 1 size for now) and although the top of the stick came out smaller (i think because it was not really centered when entering), the big middle part was perfect. Thanks again!
Thank you, Once more you have showed me something that I will be pleased to make thanks to you, carry on with your good videos and I will be pleased to make all the great things you are showing me. Thank you great work, Best of luck 🤞 🍀👍
That would be a good way to make arrows for a recurve bow! I am thinking cedar with a lamination of hickory or ash or maple in the center to stiffen them as well depending on the poundage of the bow !
I didn`t intend to make use of this woodworking book, *TopFineWoodworking. Com* but rather curious about it. I had been truly amazed right after trying it. It never disappointed me in my wish to acquire more information about the art of wood working. Many topics were covered, including everything from wood types to developing your workshop.?
Eine sehr gute und simple Konstruktion. Die Genialität liegt hier wohl in der Einfachheit. Eine besondere Hilfe in der Werkstatt. Regt mich zum Nachbau an. BG from Austria
I've seen a dozen or so of these diy dowel makers I even bought the lee valley one and sent the thing back. This is the best effort yet that I've seen the only real limitation on the surface finish is the blade and feed speed. Use a Non ferros metal blade ( one without those annoying devils ears) and your Finnish should be superb.
Just a thought has over time the rods that hold the blocks tight will dig into the wood until you can't tighten them so maybe countersink a solid washer so it doesn't dig into the wood!
Thanks. Made one yesterday and made 30 dollars worth of walnut and oak dowels. Best jig award. Thanks for sharing.
I searched on youtube videos about making various dowels and found easier methods day by day, but i think yours is the climax of my search. Thank you for sharing my friend..regards from Indonesia.
12345678901
Finished mine and made some 5/16th, 3/8, and 1/2 inch dowels from oak stock and all of them turned out great! No need for buying high priced hardwood dowels anymore!! Could not be happier with it. Did add a guard onto the back end to prevent any "biting"
Hi guys, now you can make calibrated dowels
The idea of this jig i found here, just a little modified it:
ua-cam.com/video/W1n6IRxsZow/v-deo.html&t
All free plans I ever made are here:
drive.google.com/drive/folders/1636_O_7KVQ5hzWAhDXBornWnvxXfweba?usp=sharing
GRINwood shop:
www.etsy.com/shop/GRINwood
Support GRINwood:
PayPal: grinwooddesigns@gmail.com
Thanks for watching
Tried to download the plan's but each time I have tried it failed. Upon the screen it saying...unable to download the file..there was a problem with the network!!!.
Any suggestions on getting around this problem???
👍🇬🇧
great idea.
love my dovetail saw too.
cheers 🍻
🤗😙🤗🤭🤭
This is the best dowel maker I've seen yet.
Mee too
Made a bunch of quarter inch dowels today with the jig. They are more finicky then the 3/8" dowels. I found the smaller stock size would splinter if I tried to pull the part that was in the drill chuck like I did with the 3/8" dowels. The quarter inch dowels wouldn't take the stress as well. I just cut off the square part. Worked very well once I got it dialed in. I did make a extra set of blocks as my first set had shifted and went back to just a 3/8" starter hole to the quarter inch out hole. The tolerance with the quarter inch dowels is much more picky. I went from having a few store bought dowels to having over a hundred just using my scrap oak, maple, cedar, walnut. The oak gave me the most trouble in the smaller size of dowel. GREAT JIG!
Tôi cũng đã làm như thế này và thành công,bạn thật tuyệt vời khi chia sẽ video này
this works better than any dowel maker I've seen and doesn't involve making a difficult to make cutter. Thanks for sharing.
Thanks for pointing out that you made the dowel hole to close to the table. You’ve probably saved a bunch of woodworkers a bunch of frustration.
Absolutely a fantastic idea. Thank you.
From Missouri USA
I can't improve upon the comments that are already here, just like I can't improve anything about your dowel device. The fit and finish are second to none. There are a lot of great ideas here on UA-cam, but few demonstrate the skills you've shown. Very nice. This could be a real money maker for anyone willing to make dowels. Quality dowels "Not Be Cheap!" They are hard to find and seldom come in a variety of woods.
Plus, chucking a drill onto the finished end would allow you to finish each dowel by pulling the final few inches through... Worth it instead of just cutting off the square end? IDK... Just a thought. Just a little less waste.
Thought this was a great design and built it, inititially dowels were coming out undersized. Realized that when I marked the high point of my blade, it was in the full up position. Later when using the jig to make dowels, the blade was lower. My saw pivots when raising the blade so the high point was actually further back. Once I adjusted the mark on fence to correspond to the new peak worked like a champ. Apprec I ate you sharing the design.
ты гений...и все гениальное простое...как миллионером стану ..миллион подарю тебе ))
Спасибо, бро, жду с нетерпением )) Удачи тебе!
I finally gave this a try only because this design is compact enough to be worth the space.
This is freaking sweet. You're a genius!
Best and most accurate dowel jig on the tube. Thanks for sharing
Making dowels, as much fun as you can have with your cloths on
Супер прибор! Обязательно себе такой сделаю! Огромное спасибо мастеру!
Excellent Video and brilliant Idea. Very well executed
*You have done all this work beautifully, and most importantly, it is a production product that is widely used in carpentry work.*
Merci pour le partage.
Encore une conception et une réalisation magnifique. Très professionnel !
Salutations de France
Mate you are a genius
Dude! You're a genius! I have a lot of young birch trunks on my ranch. Now I know how to use them .
The first Dowel maker that work for me , congrats
Thank you, Cristian!
Most efficient plans yet😮
Slightly complicated to make, but definitely the best dowel maker I've seen yet, awesome work!!
Thanks for sharing I have been looking for a reliable way to make dowels and I think this is awesome.
Esto es sencillamente EXCELENTE, como bien dice otro usuario, este es quizás el Mejor, The Best método para hacer bolillos.
Está será mi siguiente tarea.
Gracias por compartir tan magnífica idea.
Найкраща приспособа, яка достойна копіювання! Нещодавно придбав дешевого станка та шукаю додаткові приспособлення, для покращення його роботи.
You really have done a great job with this one
Nice set up on the sawdust catching
You have some amazing skills my friend
Very easy to make! Perfect result! I've watched a lot of videos and this is the best dowel making device I've ever seen. So far I have used a metal plate with matching holes. Now I`ll make this dowel maker. THANK YOU VERY MUCH for such a detailed video.
Have seen lots of these DIY dowel makers, but this is just on another level...The best, - Thank you.
Need to make a fair number of long dowels 16 and 20mm and out of all the dowel making videos this one seems to be the one I need. Thanks for sharing. Andy UK
Great video. Yes very helpful, gives me great ideas to adapt this idea to my shop
Amazing idea. Like a hand held lathe.
Как мне нравится смотреть на все такие столярные работы.))) Я и делатть люблю и креативить. Единственное что не люблю, так это видео монтажём потом заниматься. ))))))
I really like yiu drill press chip collection that is nice
If You are going to make ARROW SHAFTS? You need "anti-whip" blocks to support the free ends of the dowels. Just an idea. GOOD WORK!
Good idea, thanks!
thanks for the free plans👍
Ох, ничего себе ты разошёлся, вроде недавно совсем маленький канал был, а уже миллионы просмотров. Поздравляю.
Great english language.
Love the finished product 👍
ماشاء الله تبارك. روعه ماشاءالله تبارك الله
Até agora foi o melhor vídeo de arredondar madeira que já vi sem usar a trefiladeira parabéns 👏👏👏👏👏👏
Good job
Это тот самый момент, когда на приспособление тратится больше времени, чем на саму работу - и это правильно!
Ещё бы стружкоудаление сверху провести - будет вообще круто! С меня лайк за идею, воплощение и работоспособность! =)
Ваня, при помощи простой лерки нужного тебе диаметра, вставленной в плашку, и зажатую в тиски ты сделаешь тоже самое. И никакой головной боли с изготовлением всяких не нужных " приспособ". Старинный дедовский метод , кстати.
I'm. Attempting. TODAY!. The other jigs where you pound the dowel through metal or even chuck it up to drill are just a royal pain. Too much effort for one stinking 4" dowel. THANK YOU! Hope I can make mine as precise as yours.
Good job my friend 👍😜
Good idea and nice work! 👍 👌
Tolle Konstruktion. Danke für das Vid
Bravo super idée
Thank you very much for showing this!
I had already created a very 'no nonsense' dowel jig what was working (without the tablesaw), but i kept thinking about one with the tablesaw, came across your video and decided to make it tonight.
I did change some things (because that made it easier for me:
- i did not do your thing with the bolds and wing nut-thingy, i just uses a screw that i can turn in and out (filed the tip of a little)
That saved me a lot of time and i believe it works as well.
Ah, and i had to make the jig to understand why you created the part at 3:07, i thought you used it to make it easier to insert the long stick, but it had a different (better) reason ;-)
I made it tonight, and tried it on one (i only created 1 size for now) and although the top of the stick came out smaller (i think because it was not really centered when entering), the big middle part was perfect.
Thanks again!
Merci bcp pour la vidéo et le partage des plans!!!
Very good ❤️
Very slick. Well done
This is a Must have!!! Thanks
I appreciate the mention in the description, and I like your version of the jig. Great video.
Great Jig. 👍👌
Thank you, Once more you have showed me something that I will be pleased to make thanks to you, carry on with your good videos and I will be pleased to make all the great things you are showing me. Thank you great work, Best of luck 🤞 🍀👍
Nicely done 😎
That is slick!!!!! Great job!!!
That's a great idea.
👍👍👍
Thank you for the video.😀😀😀
Very nice.Impressive idea.
Super like this jig. Thanks
Elon Musk of woodworking. Genius
Awesome 👏 good idea made it
Thanks,your system is perfect.
My english is quite poor. But is an awesome jig,very useful. Thanks.
Greetings from Chile.
Ingenious I'd say. Sweet.
Very nice uploading
Beautiful Craftsmanship & Brilliant approach for easy dowell making bro
Very clever! Thanks for sharing.
Very good work 👍👍👍👍
That would be a good way to make arrows for a recurve bow! I am thinking cedar with a lamination of hickory or ash or maple in the center to stiffen them as well depending on the poundage of the bow !
Отличная работа! Всё работает. Не ожидал. Можно работать с различным диаметром. Супер!
That is better than nice, its' outstanding. Thank you for sharing 👍👍👍👍👍
Genial da musst du erst einmal draufkommen. 👍👍👍
I didn`t intend to make use of this woodworking book, *TopFineWoodworking. Com* but rather curious about it. I had been truly amazed right after trying it. It never disappointed me in my wish to acquire more information about the art of wood working. Many topics were covered, including everything from wood types to developing your workshop.?
Thanks a lot! Works perfectly 👌
Purely magical!
Wow, ❤❤❤❤ this os awesome
Excellent idea, thanks for sharing!!
Another great idea. Thanks for sharing!
Chuck your drill up to the other end of the dowel and put it in reverse and pull the rest of the dowel thru the saw blade. Nice job I like these.
Thanks for idea, i did it already, but the maximum diameter my drill chuck can hold is 13mm 🤔
Free PLANS GREAT SUPER ARTICLE
Cool project
Excellent
Thank you!
Brilliant design!
Eine sehr gute und simple Konstruktion. Die Genialität liegt hier wohl in der Einfachheit. Eine besondere Hilfe in der Werkstatt. Regt mich zum Nachbau an. BG from Austria
Absolutely genius!
Perfect 👌
I've seen a dozen or so of these diy dowel makers I even bought the lee valley one and sent the thing back. This is the best effort yet that I've seen the only real limitation on the surface finish is the blade and feed speed. Use a Non ferros metal blade ( one without those annoying devils ears) and your Finnish should be superb.
Just a thought has over time the rods that hold the blocks tight will dig into the wood until you can't tighten them so maybe countersink a solid washer so it doesn't dig into the wood!
Не плохой вариант. Возьму на заметку. Спасибо.
Brilliant.Best one so far on TY
Desde argentina muy simple y práctico te felicito
thanks the knowledge
GENIUS!
Excellent. Thanks.
From Algeria.
Thank you for this vidéo, it’s excactly what i need for my customer 👍👍👍👍👍👍👍very easy, and simple technique
Wonderful build