I love these videos of people occasionally using CNC equipment, but primarily fabricating equipment by squatting on a concrete or dirt floor, using a hand grinder to produce precision components.
Super Projekt, vielen Dank. Man merkt, dass Mateusz Turek Ahnung hat und etwas von seinem Fach versteht 👌👌👍👍, nicht wie manch Andere die hier etwas vorführen und man z. Bsp. beim Drehen die Hände als gelernter Dreher und Ausbilder überm Kopf zusammen schlägt bei deren Kenntnissen😭. Tolle Arbeit Herr Mateusz Turek, Bravo!!!👍👍. Bitte weiter so, ich bin begeistert.
Tuyệt vời luôn. Nhưng phải nói rằng phương tiện quyết định được 70 /100..vật tư rễ kiếm phải không bạn. 30 phần trăm. Lên ý tưởng là thi công hoàn hảo. Chúc bạn sức khỏe bình an thành công và hạnh phúc
Pompa ręczna jest do precyzyjnej regulacji wysokości ;) No i gdyby była przerwa w dostawie prądu można używać prasy ;) dzięki za wskazówkę z zamkiem, jak narazie przecieków nie ma ;)
Lovely Idea and awesome construction work, it is truly inspiring, keep it up, all the best for your new projects and the future. Stay safe and healthy. With Kind Regards,
See you have a future mechanic/machinist that’s more interested in knob twisting at present. Be patient with him and take time in your shop to especially first teach him about the operation and hazards of each piece of equipment he’s interested in. You may need to secure the shop or kid proof it to the extent you can before you leave while he’s still there if he can gain unsupervised access to the shop. Great builds. I thoroughly jealous of your shop, equipment and diversified skills. I’m a wannabe machinist. At 66 if it don’t happen soon it may not happen though. My first goal is to get moved nearer to my adult children and specifically my grand children.
należy uważać na przegrzanie oleju, gdy pompa pracuje przez dłuższy czas. Nie ma tam dużo oleju i będzie się przegrzewał podczas dłuższej pracy. Nawet podczas pompowania oleju ze zbiornika do zbiornika. Nie powinna przekraczać 60°C.
@@mateuszturek5760 You're very welcome. Let me know if you want a free premium forum membership, and you can post your videos on our forum whenever you want. We have many YTers on board.
Haverá uma sequência, tenho algum material para um filme, mas não tenho tempo de montá-lo nem de terminar a máquina totalmente. Mas a máquina funciona e já dobrou um pouco
Yeah I think you did a great job. The only problem was you didn't tell us what it was in the beginning. At least I didn't see that so I didn't spend 35 minutes. Watching you build something that I had no idea what it so, I jumped to the back and saw it. Think it's a press. Maybe I don't know, but in the future show us what you're building first. Get our interest and then we'll watch the whole thing.
I'm glad you like it, and you actually gave me valuable feedback that I hadn't thought of before, and I already know that I will do just that next time! Thank you :)
@@mateuszturek5760 I'm glad you were open to my suggestion I usually get negative feedback when I suggest things to people on UA-cam. Looking forward to part two.
I love these videos of people occasionally using CNC equipment, but primarily fabricating equipment by squatting on a concrete or dirt floor, using a hand grinder to produce precision components.
Hermosa terminación para cubrir ese muro. De a poco has ido terminando la viste
une video sans musique et tres professionnelle👍💪
Wow . EVERY TOOL, NUT ,BOLT, LATHE, WELDER,.AND KNOWS HOW TO USE THEM.
EXCELLENT JOB AND KNOW HOW.
I WILL GET ME A LATHE SOON, I HOPE.
Thank you! I wish you to buy it, it's an irreplaceable tool 😀
In a short comment this is the best thoughtful machinery project I have ever seen
Hey!! You are the first person I have seen centering work in a chuck by using the tool post😂 I thought I was the only naughty machinist!!
Naughty machinist. 🤔 That sounds like a great handle! 😂
Awesome and entertaining presentation of the process of making the masterpiece! Please show us how it performs!
Well done, man!
I love when the kids to help! So cute they are!
This was professional work of a high class.
Super Projekt, vielen Dank. Man merkt, dass Mateusz Turek Ahnung hat und etwas von seinem Fach versteht 👌👌👍👍, nicht wie manch Andere die hier etwas vorführen und man z. Bsp. beim Drehen die Hände als gelernter Dreher und Ausbilder überm Kopf zusammen schlägt bei deren Kenntnissen😭. Tolle Arbeit Herr Mateusz Turek, Bravo!!!👍👍. Bitte weiter so, ich bin begeistert.
vielen Dank 😊
UN BUEN PROFESIONAL . SALUDOS Y GRACIAS POR HACERNOS PARTÍCIPES DE TUS TRABAJOS
Great job. Something your son will be very proud of, years from now
Super projekt, ciekawi mnie efekt finalny i praca giętarki. 👌
😊😊😊😊😊
This is what we call 'Perfection'!
Thank You!
Totally amazing machine , great fabricating , excellent filming . Score 10+
Je suis toujours épaté de voir ce genre de travail assez incroyable !!! bravo ...
Gracias por compartir tan grandes enseñanzas .bendiciones
Must unprecedented, great invention. Thanks
wow SPETTACOLARE un gran lavoro i miei complimenti "Amazing work man"
I love what you are doing and really how you do.
A fantastic build. Great skills.
Excellent tools, incredible skills resulting in amazing job. Congratulations
Thank You!
I liked the part where he shows how it works
Nice job! Nice to see actual welding skills on a you tube diy vid. Rare sight
Thank You!
First time viewing your channel and find it excellent. Anyone named Matthew must be okay as well!
Super travail en plus tu et très bien équipé de tous genre de machines j'aimerais avoir tous sa aussi
Tuyệt vời luôn. Nhưng phải nói rằng phương tiện quyết định được 70 /100..vật tư rễ kiếm phải không bạn. 30 phần trăm. Lên ý tưởng là thi công hoàn hảo. Chúc bạn sức khỏe bình an thành công và hạnh phúc
Pompa hydrauliczna zebata plus pompa reczna hybryda 😅 do siłownika można dać zamek hydrauliczny bo to rozdzielacze pod obciazeniem lubią puszczać 😊
Pompa ręczna jest do precyzyjnej regulacji wysokości ;) No i gdyby była przerwa w dostawie prądu można używać prasy ;) dzięki za wskazówkę z zamkiem, jak narazie przecieków nie ma ;)
That was a amazing build you did,the bender is a very nice tool with high quality machine awesome job.
lots of scrap.metals available for your disposal.🙂 amazing work.
Fantastic work!
One word.............AMAZING
⭕️you're a hell of an engineer good sir 👏 👏👏
Thank You!😀
Jovem fazer isso com o paquímetro da uma dor no coração, eu sempre tive cuidado com minhas ferramentas... muito criativo
What a brutally amazing project. Super impressive.
Awesome build
Beautiful job-outstanding!
SIMPLEMENTE EL MEJOR VIDEO VISTO
O kurcze , to mnie zaskoczyłeś!! To będzie giętarko-prasa!! Super pomysł i robota! 👌👍👍Czekam na C.D.😀
Zdrowia. Bo widze ze musisz miec duzo zdrowia na te wszystkie pomysly i chcesz sie pewnie dorobic. Wszystkiego dobrego w realizacji celow.
Lovely Idea and awesome construction work, it is truly inspiring, keep it up, all the best for your new projects and the future. Stay safe and healthy. With Kind Regards,
Make a foil ball dip in water and rub. It will take rust of your chrome
Nice job I'd thought of adding something similar to the press brake I made to save a bit of space that's a nice compact bit of kit👍
Nice build!
Amazing work
Outstanding skills and work.
Great job, thank you brother. You are so talented
Excelente video!!
you are a good worker, congratulations!
Really nice job.
Très beau travail soigné bravo
Хорошая работа. Конечно лайк
Super to wygląda!!!! Gratulacje!!!!
Very good ❤💪🏼🍀🤩👍
Well, it's "No Holds Barred, Hell for Stout"!! But also expensive!
See you have a future mechanic/machinist that’s more interested in knob twisting at present. Be patient with him and take time in your shop to especially first teach him about the operation and hazards of each piece of equipment he’s interested in. You may need to secure the shop or kid proof it to the extent you can before you leave while he’s still there if he can gain unsupervised access to the shop. Great builds. I thoroughly jealous of your shop, equipment and diversified skills. I’m a wannabe machinist. At 66 if it don’t happen soon it may not happen though. My first goal is to get moved nearer to my adult children and specifically my grand children.
Salut, bravo,super boulot, ça donne envie de s'en servir.
należy uważać na przegrzanie oleju, gdy pompa pracuje przez dłuższy czas. Nie ma tam dużo oleju i będzie się przegrzewał podczas dłuższej pracy. Nawet podczas pompowania oleju ze zbiornika do zbiornika. Nie powinna przekraczać 60°C.
Po pewnym czasie doszedłem do wątpliwości co do wielkości oryginalnego zbiornika w tej pompie, w następnym odcinku zaplanowałem już zmianę...
Super robota, czekam na więcej.
Great work. We shared this video on our homemade tools forum this week 😎
Thank You!!!😃
@@mateuszturek5760 You're very welcome. Let me know if you want a free premium forum membership, and you can post your videos on our forum whenever you want. We have many YTers on board.
Congratulations! 👏👏👏👏👏👏
Great machine!! Congratulations
Finally, a fabricator on UA-cam that owns a bandsaw. FFS!
Que buen cincel ,utiliza el calibrador para rayar.
Exactly excellent job 👍,
Absolutely brilliant
Amazing job my friend 👏
Да мастерство на высоте
So nice!
Impecable muy chingona felicidades
Great job!!!
waiting for the testing...
He has a lot more scrap metal laying around then I do
Cześć Mateusz :)
5:51 Elektroda z geometrią "Pakistan stajl" ;)
-Dobra,pozdrawiam i oglądam dalej ;)
Exelente 👍
A continuação? Ela já está funcionando?
Haverá uma sequência, tenho algum material para um filme, mas não tenho tempo de montá-lo nem de terminar a máquina totalmente. Mas a máquina funciona e já dobrou um pouco
33:35 Cool camera shot
Nice work
Fajnie Ci to wyszło 👍👍
Nice work!!
Thank You!
👍👍👍👍💪💪💪💪 Супер!!!
А почему нет испытаний аппарата? Почему не покрашен? Сколько всего у него рабочих функций? Ролик не доведëн до конца.
Просто нет времени
Wao bravissimo 👍🏿
Well done mate good combo
Cheers from Aus
Awesome 👍👍👍🇦🇺
Jak spawasz na tokarce to masa zawsze do materiału bo inaczej prad idzie przez łożyska. Pamietaj o tym. Powodzenia.
Tak, nauczyłem się tego jakiś czas temu 😉 mimo wszystko bardzo dziękuję za cenną radę! Pozdrawiam 🖐
Świetne wykonanie i dokładne. Czekam na dalszy ciąg.
What is the name of that drill Chuck that you use when tapping. The Blue/Red one.
King Tony
Yeah I think you did a great job. The only problem was you didn't tell us what it was in the beginning. At least I didn't see that so I didn't spend 35 minutes. Watching you build something that I had no idea what it so, I jumped to the back and saw it. Think it's a press. Maybe I don't know, but in the future show us what you're building first. Get our interest and then we'll watch the whole thing.
I'm glad you like it, and you actually gave me valuable feedback that I hadn't thought of before, and I already know that I will do just that next time! Thank you :)
@@mateuszturek5760 I'm glad you were open to my suggestion I usually get negative feedback when I suggest things to people on UA-cam.
Looking forward to part two.
Top-Job,Sir💪👌
Good job
Thank You!
Nice job
What brand lathe is that your using? And very nice work by the way!!
This is a lathe produced by "Mateusz Turek" 😎😁 Thank You! ua-cam.com/play/PLnx43212MASG6GdsVpzU0RQ0Z_t3Jbl3X.html
Extremely interesting 👌
Niesamowita maszynka dwa w jedynym Szacuneczek
Great job
Is it for changing sanitary napkins?
So good ii boss 💪💪👍👍😊😊✅✅✅
Excellent sir
Want to see this!