Thank you for putting this video up after trying for over an hour looking at the manual for reset information good old youtube to the rescue! My machine broke the water inlet switch around a month ago flooding my kitchen just never worked right after that ran it through your process and now working great again!!
Your video confirmed my suspision. Our Kenmore Elite (exact model as in video) is experiencing the exact same trouble - the washer motor is weak and intermittent. Running the diagnositic was very helpful. Tomorrow is Black Friday, so timing could not be better to shop for a new dishwasher. Thanks.
Thank you for how to diagnose. Mine wasn’t draining and green clean light was blinking. For some reason it just wouldn’t start and drain or run any cycle. After doing the test, it drained.
I have a kenmore model number 665.1389. I have many flashing lights. I tried all the button sequences that you have mentioned and it will not reset or work. Any ideas?
Your drain hose needs to go to a dishwasher air gap or have a high loop before going to the disposal. A high loop can easily be installed if your sink doesn’t have one. This will keep your drain hose clear. ua-cam.com/video/t7dEkdHjR84/v-deo.html
@@shaheerrashid4787 I had to use cc to understand and cc did a really poor transcription so even with cc it was difficult for me as well. I ended up connecting my cell phone to a sound box in order to hear him.
Thank you for putting this video up after trying for over an hour looking at the manual for reset information good old youtube to the rescue! My machine broke the water inlet switch around a month ago flooding my kitchen just never worked right after that ran it through your process and now working great again!!
I m glad you fixed your dishwasher, don’t forget to subscribe ✌️
Your video confirmed my suspision. Our Kenmore Elite (exact model as in video) is experiencing the exact same trouble - the washer motor is weak and intermittent. Running the diagnositic was very helpful. Tomorrow is Black Friday, so timing could not be better to shop for a new dishwasher. Thanks.
Our Kenmore Elite was stuck on TURBO ZONE and wouldn't work at all. Ran this diagnostic and it now it works perfectly. Many thanks Hamid!
Thank you for how to diagnose. Mine wasn’t draining and green clean light was blinking. For some reason it just wouldn’t start and drain or run any cycle. After doing the test, it drained.
Thank you this was very helpful 👍🏼
I tried that, but at the end of my diagnostic all the lights on the panel stay on. Is it normal? What does that mean?
How do you reset this dishwasher? I find videos on how to reset other dishwashers but not this model with these buttons. Thank you.
Normally bu disconnecting from the power source for around 5 mins and then connecting it again.
It's working. Thank you 😊
I have a kenmore model number 665.1389. I have many flashing lights. I tried all the button sequences that you have mentioned and it will not reset or work. Any ideas?
Same problem here
Super!
Thank you!
Your drain hose needs to go to a dishwasher air gap or have a high loop before going to the disposal. A high loop can easily be installed if your sink doesn’t have one. This will keep your drain hose clear.
ua-cam.com/video/t7dEkdHjR84/v-deo.html
You need to find out where your volume control is at on your video device or get a Mic, no one can hear a word you speak.
RL Appliance Repair I can hear him perfectly
@@shaheerrashid4787 I had to use cc to understand and cc did a really poor transcription so even with cc it was difficult for me as well. I ended up connecting my cell phone to a sound box in order to hear him.
For me: Hi temp and heated dry x 2
Did it work ?