**Want to own the tools I use ?? Click on the amazon link below to get my top 5 Tools I use** Automotive Test Light- amzn.to/3z1Pdxa Flexible Backprobe- amzn.to/3Pyr3zO Multimeter- amzn.to/3PbuT23 OBD Scan Tool- amzn.to/3zaNWnq Wire Piercing Probe- amzn.to/3OecWhT
Hey brother. I hope everything works out for you at your new shop. I’m a mechanic and fabricator so I know what your dealing with. I saw your video on institute for justice. Keep up the good fight.
We all make mistakes, but that was a beefstake. Besides people who are not mechanics, need to be more careful when jump starting any car, to always look for the positive and negative symbols on the battery. He could have connected the positive on the battery and connected the negative cable from the jumper to the engine ground. Probably safer procedure anyways.
it was so simple when the push to start was a button on the floor next to the gas pedal actually pressed on starter and it would start so simple never gave problems
That's a tough mistake from when the car was jumped, but that 175 amp fuse did its job. If the fuse had not blown, maybe modules would have been damaged. You probably have a very satisfied customer now. If this was a Chrysler product, would this have destroyed the TIPM?
Thanks OZ new to the show. I was just wondering what you suggest about where I can purchase all those Alligator Clips to my meter and back probe pins and any other little helpful tools. I'm new to this newer automotive stuff. Thanks again for these useful Videos
Great lesson my man, keep up the good work. Have a 98 v6 camry le cranks but does not start, when i plug in my scanner communication error comes up, engine check light comes on when on accerssory, checked all the fuses they check out ok am not electrically inclined, what am i missing out or what should i check up next...thanks and keep up the good work😊
Great diagnosis but what do you change out. Did you replace the entire fuse block or can you change each one individually. Wish you would have been a little clearer on that. Maybe I missed that. Love your videos, very informative. That you Mr. Oz.
If you feel like this video helped out, feel free to support the channel by donating. Just one click away on the link below, to help support the channel :) www.paypal.me/ozmechanics ** Want to use the tools I used in this video? Click on the links below*** Klien tool multimeter amzn.to/3JHTQ1d
**Want to own the tools I use ?? Click on the amazon link below to get my top 5 Tools I use**
Automotive Test Light- amzn.to/3z1Pdxa
Flexible Backprobe- amzn.to/3Pyr3zO
Multimeter- amzn.to/3PbuT23
OBD Scan Tool- amzn.to/3zaNWnq
Wire Piercing Probe- amzn.to/3OecWhT
Your approach to problem solving is top notch. Go with available clues, look at vehicle information and go where it leads you. That's perfect.
Thanks for the kind words. And as well, thanks for watching
Hey brother. I hope everything works out for you at your new shop. I’m a mechanic and fabricator so I know what your dealing with. I saw your video on institute for justice. Keep up the good fight.
15:04 bloppers sounds like something one drops in the toilet after a Taco Bell binge
I wish you had showed how to change the fuse. Good video.
KNOWLEDGEABLE Oz Mechanics
Thank you 👍
Oz Mechanics
From Nick Ayivor from London England UK 🇬🇧
THey always give you more info AFTER you go through all that work
lol.. Bloppers was a blooper too.
Blooper in a blooper.
Great video Dr Oz!
Customer states : Let's not tell Oz Mech the real story and pretend we did it all correctly 😂
Good job brother 👌
good job never give up you got this
Great diagnostic video..
THE BEST DIAGNOSTIC EVER!
I saw you on IJ, good luck.
Great job buddy
We all make mistakes, but that was a beefstake. Besides people who are not mechanics, need to be more careful when jump starting any car, to always look for the positive and negative symbols on the battery. He could have connected the positive on the battery and connected the negative cable from the jumper to the engine ground. Probably safer procedure anyways.
Great job again 😃
CLEAR APPROACH TO FIX THE ISSUE
Thanks for watching
it was so simple when the push to start was a button on the floor next to the gas pedal actually pressed on starter and it would start so simple never gave problems
Great investigation
That's a tough mistake from when the car was jumped, but that 175 amp fuse did its job. If the fuse had not blown, maybe modules would have been damaged. You probably have a very satisfied customer now. If this was a Chrysler product, would this have destroyed the TIPM?
Great I thought a possible reverse polarity jump.
When he first dropped off the truck that what I was thinking but they said no.
NICE FIX MATE
Thanks for watching
Thanks OZ new to the show. I was just wondering what you suggest about where I can purchase all those Alligator Clips to my meter and back probe pins and any other little helpful tools. I'm new to this newer automotive stuff. Thanks again for these useful Videos
No other damage? So lucky!
Nice 👌
Great job
Great lesson my man, keep up the good work. Have a 98 v6 camry le cranks but does not start, when i plug in my scanner communication error comes up, engine check light comes on when on accerssory, checked all the fuses they check out ok am not electrically inclined, what am i missing out or what should i check up next...thanks and keep up the good work😊
Check crankshaft position sensor.
Grasias
Great diagnosis but what do you change out. Did you replace the entire fuse block or can you change each one individually. Wish you would have been a little clearer on that. Maybe I missed that. Love your videos, very informative. That you Mr. Oz.
In 14:40 I explained that I was going to change out the fuse block.
Muy buen video😁👍
Gracias por tomar su tiempo para ver mi video
cant just get a 175a fuse?
Woooo hoooo nice job 👍🏼👍🏼
Thanks for stopping by
You’re welcome, I see all your videos!
Looks like cluster gauges aren’t working... part 2?
Just right before the blooper ran it showed the truck running and the cluster moves
@@OzMechanics ahh just needed to stay for like 1 second longer.
Awesome man you skip no details!
I would have made the same mistake
i jumped my dead car with my truck and ruined the pcm in my truck because of it..😲
Ooo no 😲
Nice
If you feel like this video helped out, feel free to support the channel by donating. Just one click away on the link below, to help support the channel :)
www.paypal.me/ozmechanics
** Want to use the tools I used in this video? Click on the links below***
Klien tool multimeter
amzn.to/3JHTQ1d