How To IMPROVE Your Webcam Quality: ULTIMATE GUIDE
Вставка
- Опубліковано 9 тра 2024
- Take an in-depth look at all the settings you should be changing to get the BEST quality, colors, and performance out of your Logitech Webcam.
👾 Nerd or Die Stream Overlays, Alerts, and Designs:
gmngcr.rs/overlays - Get 15% OFF with code: GAMINGCAREERS
🔗 Links:
Download Logitech Capture: www.logitech.com/en-gb/softwa...
Download My 30+ Free Webcam LUTs: gamingcareers.com/guides/30-f...
⏩ Timestamps:
0. Introduction 0:00
1. Adding Your Webcam in OBS or Streamlabs 1:38
2. Fixing Resolution and Framerate 2:27
3. Lighting for your Webcam 5:23
4. Fixing Webcam Colors, Focus and White Balance 6:48
5. Adding a LUT Filter in OBS or Streamlabs 14:00
6. Bonus Tips for Streaming with a Webcam 16:08
👾 My favorite stream overlays and alerts:
gmngcr.rs/overlays - 15% off with code: GAMINGCAREERS
🖥️ My recommended streaming PC builds: (updated regularly)
gamingcareers.com/builds/
🧙 The best tool for growing a UA-cam channel:
gmngcr.rs/tubebuddy - 20% OFF with code: GCBuddy
🎧 Copyright-free music I use for UA-cam and Twitch:
gmngcr.rs/epidemic - 30-day free trial
🎙️ Check out my weekly livestreamed podcast:
gamingcareers.com/podcasts
💌 Subscribe to my email newsletter:
gamingcareers.com/newsletters
🎬 The editing software I use:
gmngcr.rs/editing-software
📢 Gaming Careers socials:
gamingcareers.com
/ discord
/ gamingcareers
/ gaming.careers
/ gamingcareers
/ gamingcareers
Hashtags:
#Webcam #Logitech #GamingCareers
-------------------------------------------------------------------------------
Disclaimer:
This description contains affiliate links, which means that if you click on one of the product links and buy a product, I receive a small commission. As an Amazon Associate, I earn from qualifying purchases. - Навчання та стиль
Feels kinda weird releasing content when the world is going through such a scary time. Stay safe my internet friends! 🙌
Honestly, I really needed any kind of distraction and this was perfect timing to try and make my webcam look a little bit better as a side-project. Thank you.
i read online that logitech's g hub software is able to save cam settings. i havent tried it yet. did you test it yet/could you test it for us? :D
it is weird but that's how life is. you too
Hey can you make a video on how to make a addcom command for nightbot cause I want to be able to add a command from my chat
We're all stuck inside and hoping to connect online so it is great you are releasing content. I was just trying to find out why my webcam looks like trash and this is perfect timing.
This video made me realize that after 2+ years of streaming I had my C920 (which is a 1080p cam) on 360p mode this whole time. I win the BIG DUMMY award today ladies and gentlemen!🥇 Thanks for the vid 😄
Jesus
there's no way you didn't realize that
Taha Abbas Way.
everydays a school day :)
Also normally you can half the res when you half the size so you may not have noticed if using a small cam screen, sometimes i use 480 for small cams like footpedel cam and save the 720 or 1080's for the large camera shots, zooms and close ups.
This has been the most helpful lighting and camera adjustment vid I have seen thus far. VERY detailed and you go slowly enough that I was able to follow along and play with settings.
Thank you so much!
I dont have this "configure video" on the MacOS. How do I make those minute changes to the webcam? I just started using Macs, I was on Windows
Really love your content. I've learned so much just from your YT content. I've managed to build a small twitch community and I wanna thank you for that. I espacially enjoy your podcasts they are amazing. Keep going my dude
Wow this is amazing! Thanks for this video!
love the content! Found you a few days ago and it has been quite some time since i found someone who explains actually helpful things in such an understandable way! thank you for what you do!:)
Thanks! You saved me with this one. I just got the StreamCam, followed your every step and I couldn't be happier with the result. Awesome stuff. 🤘
Do you have a solution or a fix for webcam and microphone being out of sync when streaming with Streamlabs OBS?? I have the same issue with both the c920 and the logitech brio
This tutorial came out at a time when I truly need it thanks for everything
I was literally having trouble with my webcam and googling solutions right before you posted this video! Haha what a coincidence
8:50 i have no Preset option in my logitech software any suggestion?
Hey man, I just wanted to say thank you. I´ve had so many troubles with my brio in the past (bad image quality, settings not saving and so on) and you really helped. I also really like the filters. Thank you so much.
Love the honesty on the auto-focus hahaha. Your videos are great, informative, to the point, and with explanations that make me understand WHY to do something. Thank you so much for all the effort you put into these!
This is always the best channel for technical how tos. Perf production quality & rhythm. I find it so enjoyable to watch your tutorials as leisure & education all in one package. Thank you ❤
i ended up with clayton filter and it looks amazing, thank you so much for this. it looks way better now
idk if anyone will be able to help but itd be great. I have the webcam flickering problem and changing it from 60 to 50hz doesn't help and i've tried adjusting many things. I only have one main lighting source being my ringlight but more lights isn't going to fix this issue right?
The improvements to my webcam stream are incredible!! thanks for the advice :)
As ever this is an awesome video, Pete. 😁 👌
As always thank you for taking the time to put this guide together I definitely plan on utilizing this during my own streams when using my C920 as a secondary camera angle to showcase my setup or a few points of interest within my room. 😄 👍 👍
Cheers to you, my man! 🍻
Holy crap your content is so professional and well done. Really helps me have faith that you're going to give good advice when all your videos are so high quality! Love it!
I was searching for a video to adjust the webcam lag when streaming on OBS and found this one. Just downloaded the LUT filters and it makes a HUGE difference. Thanks for this awesome bonus!!
Great work man, followed it from start to finish and it's definately improved my c920 output. Legend!
Thanks! The auto focus has been an issue on my streams for a long time and I had given up on fixing it
@@Aeroooo vialated
hey
Nice
Big thank you for this! I have spent the whole day re-doing my cam set up and this helped clean up so much!
This video helped me improve Logitech Streamcam quality immensely. I tried so many other guide but this was a game changer. The LUTs are amazing. Thanks mate!
This is exactly the kind of tutorial I need, thank you so much! ♡♡♡
Why do I like this guy so much. I’m not even interested in this topic but I like hearing him talk.
we're in the same boat
Yeah same. This video is useful if I had a facecam. But I don't have one.
He’s just so smiley and nice!
I'm actually interested on the stuff but I feel you. I came here from another video and the guy in that one felt so pretentious and kinda like an ahole and didn't eve helped. I thought it might have been the difference but I guess is just the guy lol
He’s so asmr
ty for this my friend! keep up the streams and videos! all love to you!
Tuned in in hopes of not having to always change the settings in obs back to my prefered ones. What a relieve. Thank's alot bud!
Thank you very much! I was testing each one of the LUT's available, and then two of them remaining in my selection: Brewer and Larson. When I was choosing between the two, I had created an 'Apply LUT' filter for each one, and by mistake, I activate both at the same time and its output was better than choosing a single one of them!
just tried it myself and you're right ... thanks for the tip 👍
hmm I can't seem to find how to add luts on Streamlabs OBS, it doesn't appear on my filter list
This helped me so much! Was having so many issues and this honestly fixed everything. Thank you
We have been wrestling with our Settings for two years and I’ve been looking for a video on Settings and it’s been so frustrating and now I found this video and ATD wants to thank you so much!!!! We do art work and resin videos everyday,And we have struggled with getting the correct or true colors/tones of pigments or paints. And keeping the settings,don’t get me started.lol thank you so much for this video.
I bought the LED panel from amazon and its absolutely amazing!
What is it called
name?
????? Which??
Quick note: The Brio is locked to MJPEG if you record at 60fps, but you can use NV12 or YUY2 if you drop the framerate down to 30. MJPEG is the most compressed so it will look worse. The higher framerate might be worth it for many people, though.
Hey, 2:55 I have only 1 option for resolution that is 640x480. What can I do now? What's the problem here?
@@pluto4060 the problem IS YOUR CAMERA
It was extremely helpful...I was frustrated as there were so many videos on the youtube about webcams but none of them were helpful and finally I found your video which helped me alot... Thank you so much for such a detailed video...
Thanks so much with all the video settings tips. And the luts! never knew about that kind of thing. yours are awesome
Hi, just wondering how to get the Configure Video options? Is this available when using OBS on a Mac?
Yeah, I don't have it on OBS for Mac while running c920 either. I don't think this vid is going to solve any problems for me. I've been using Webcam Settings to override auto webcams like the built-in FaceTime HD and c920. But the dinky third-party utility still wrestles with the cameras own auto setting; sometimes the camera reacts when you slide the knobs, and sometimes it doesn't. And it offers no real-world numbers like shutter-speed or ISO, but instead arbitrary percent dial numbers for "Gain" and "Time". You get a one-dimensional White Balance slider (no pink/green slider).
when you edited your webcam in LogiCapture, and then went back into OBS did you have to change your source from "Brio Webcam" to "LogiCapture" so that it applied the settings you'd tweeked?
I would like to know it too!
You can test this by adjusting picture in Logi Capture, Closing the program. Opening in OBS. If its default properties are changed from, then it must save the settings. Hope this helps.
@thurtea thankyou, I've upgraded since those comment thankfully 🙂
Thank you so much for this! This helped a lot and the quality looks stunning now! Appreciate it. 🤓
Hello I did everything like you, also I have the Brio as well but I have a little delay, so my lips are not synced with video in obs, can you please help me?
Lower your frame rate
What about a $13 webcam off amazon that I got a couple years ago?
OMG YES FINALLY WHAT I AM LOOKING FOR. Thank you for making this content you are helping us a lot. Keep doing it
Good stuff. Thanks for this! I have the C920s and did use OBS for my camera's settings, but will try out some of your LUTs and give Logi Cam a go. Stay well!
its not saving automatically for me i have to redo the settings every time i exit the logitech capture
Same, any experience with this +[Gaming Careers]?
'So you've just got your logitech......' - chance would be a fine thing! Out of stock absolutely everywhere! Great video though. Using it to adjust my cheap and nasty tecknet camera.
Same here, logitech out of stock but need webcam, had to get some random cheap one from china.
exactly
@@Nico-ur2po I'm stuck with a NIYPS webcam. Stuck at 720p and a lot of pixles
Use your phone as a camera, it's what I'm gonna be doing
Worse is when they're in shock it's costing between 250-400 🤣 🤣 🤣 🤦♂️
I started a video production LLC in February 2020. I want to start doing editing tutorials, and I just want to let you know I love your set up and the editing you or your editor did. The video has a great pace and the audio is AWESOME!
Just started streaming, looked alot for guide in the internet, and most say your the only one that really make one understand it all much better. great videos and TY ! :)
11:27 This has always been a problem with logitech software, it only gives you a kelvin ajustment but no tint, so when you go manual WB, it sets a fixed tint and you ajust warm/cold but it might be too green or to magenta, you won't be able to ajust it. Crazy that auto allows for Tint movement but not manual, maybe it's not casual friendly, they should add an "advanced" setting
As soon as he said "how you can actually save these settings" I was sold...... Goddamn that is an annoying problem!
Hex to the yes it drives me crazy!
I didn't see where you can save the settings in Logitech Capture. Everytime I close it and reopen Logitech Capture I have to re set settings.
How do you install the Logitech Capture and let it open with just a click. Every time I try to open it will ask me to install and then launch it
you hit apply and then hit ok
For those with Logitech webcams not natively supported by Logitech Capture, I found a hack described in this Reddit thread: www.reddit.com/r/LogitechG/comments/fox6wy/logitech_c930e_webcam_not_detected_by_logi_capture/. No idea why Logitech Capture doesn't support some of Logitech's devices.
goodness me, the difference is unbelievable after following these steps. and I was here thinking i had everything set up just fine!! thanks man, great video.
your videos are very informative and well put together. Keep up the great work!
I didn't even finish this video and i feel like its gonna change my LYFE
Great tutorial, thanks!
I do however wonder about one small thing, is there a way to have a 4:3 aspect ratio on the same camera, as well as a 16:9 one.
I personally find 4:3 perfect for an in-game scene, and 16:9 for just chatting/brb scenes. I however can't figure out how to make that happen, since adding a second source of the same video capture device doesn't work.
If anybody could point me in the right direction, that'd be great! Thanks in advance :)
Hey, 2:55 I have only 1 option for resolution that is 640x480. What can I do now? What's the problem here?
Oh my goodness! Thank you so much for this(: very helpful
thank you so much for this video (and the free filters) !!
I didnt know bill gates had a brother
Alternate title: how to improve your logitech webcam using a limited software only for logitech cameras and not a phone or any other cameras apart from logitech.
So look up someone else's video...
My man, the settings that are shown in the video can be applied for basically any webcam, not just Logitech ones. Also, of course he wouldn't be talking about phone cameras. It specifically states webcams in the title...
So when I click Properties, I don't get that screen at all. My OBS just takes me to the screen where you pick a camera, no other options. Any advice on this?
Probably the wrong version
@@albertxu2509 What version are you using?
I found this very helpful! Thank you! I was losing my with not being able to save my webcam settings.
I would have liked you to add the "What should you do if you had a green screen". Maybe it is kind of obvious, but to many obvious things are not that obvious these days :-)
Im just automatically hitting the like button whenever I start a video from Gaming Careers. Am I alone on this one?
Very nicely DONE! Thank you for the filters and sharing your head knowledge! It is straightforward and no boloney . I'm a new subscriber.
OMG thats really helpful! your guides are just amazing! going with details and everything... just awesome!!! you're truly the best!
Barely any improvement in webcams in 8 years :(
This video was crazy helpful! My video was looking a bit shotty until I went to Logi Capture and changed it from Exposure to Frame Rate. Man, what a change! I saw it before but didn't really think about it until now. Now it looks and "feels" sooo much better. Granted, my PC settings are different from yours and my lighting isn't the best (but not too bad), but the video quality skyrocketed when I did that. Thanks for the all the help! Looking forward to finding more tips in the future!
This is the most helpful and simplified tech video I've ever seen, thank YOU
Thank you for the free LUTs! I love them. This was brilliant advice.
Thanks for the tips. I'll be changing these settings and following this advice. Thanks.
One question. My Logitech Brio does NOT show 4k, nor 60fps when 1080p on OBS studio. It works perfectly fine with Streamlabs OBS. Is there a problem with a driver or am I just lost?
I found this video was really helpful, thanks! i do have a question, if i change the degrees at the field of view tab in the logi software, will that change the quality of my webcam? because my first thought was that if i put on 65 degrees it zooms in a bit and it might lower my quality. a answer would be really nice. btw english is not my first language so there may be some faults in the text. Thanks, Jason
I just recently decided to give streaming a go and am starting with 0 experience and knowledge. I stumbled here looking for camera advice and wanted to let you know that as old and dumb as I am you still managed to teach me a lot. Thanks!
This video helped me out alot with my DJ streaming setup using my existing Logitech HD C920. Thanks alot cuz the quality of my streams are alot better using everything given in this video including the LUT filters !!! Definitely recommend this
As a brand new streamer this video in itself has given me so much more information AND made my little stream much better. Thank you!
Omg!! Thank you so much for this video. I’ve been looking for help in this area for many years! 🌹🌹🌹
Thanks so much! Biro is dialed in perfectly now! Really appreciate it!
Good job on keeping your eyes hydrated!
Thank you so much for the video, and the LUT pack.
Pete, I followed through. But it seems there is no "saving" option in Logitech Capture software. I noticed, even though I changed... Backed-up the settings, The following settings always reset. (Auto Focus ends up enabled, Auto White Balance is also enabled and my Image Settings reset again.) Got any idea on how to fix this? It seems these three settings always reset.
I got a Logitech C920 and also uninstalled the old software to setup the webcam.
great Videos mate, i came through a search on Logitech webcams for streaming. keep up, you're a natural.
Thanks so much! My friend Brent from The Paranormal Portal shared this with me... What a difference in quality!
I can’t stress how much this channel has helped me, thanks lads!
This video is extremely helpful for me, thank you so much!
Just found this....moved my youtube streaming studio to the basement (had to buy lots of lights) now having great difficulty looking good on stream (looking fairly pale)..... hoping to figure it out soon. Love your channel :)
Great guide! I used one of your LOTs. Set it on 0.7 in Streamlabs. Works fantastic!
adding a lut definitely helped,thanks!
Thank you! The LUT pack is insanely good!
the intro was exactly me, thanks mate!
Thanks for the tutotial and LUT. Super useful
Sir my video after render complete video run but end of video again start but black screen suppose my video 5 minutes but after render video is 10 minutes 5 minutes actually my video and 5 minutes black. How to solve .you have any video then plz link share with me.
I'm not skipping your ads bro, you deserve the money :D. Thank you so much
Thank you! It's what i was really looking for :D
Thank you for this - Very very helpful and easy to follow
Ive got to say you really are excellent at these videos. They really are helpful and you explain everything so well and clearly. Im setting up a youtube gaming channel for my boy and your videos are so helpful. Thanks and keep up the great work.
wonderful video. thank you so much for the LUTs to try out :O
Thank you for the free LUTs!
Thank you so much for making this tutorial. You deserve a cookie 👍
Thanks For The Lut Pack Buddy 💖🙂🤗
Your content its absolutley insane! THANK YOU
Great video, really informative. thanks man keep the vids coming! :)