Winch a car OFF a trailer!
Вставка
- Опубліковано 24 тра 2018
- The snatch block I should've bought: amzn.to/2KTi4HT
Cluster hooks: amzn.to/2IKOCY3
The snatch block I bought: amzn.to/2KUxsnp
Follow me on Instagram at guyinwy
Exclusive content available at www.patreon.com/guyinwy
Support the channel with your Amazon purchase: amzn.to/2CMkUz3 - Авто та транспорт
Plow prep also has taller front springs. Factory leveling kit.
Just did this a month or so ago. I have a d ring in the floor of my garage. Perfect to hook a snatch block to
Good Job Blake. Very good tips for people that are not familiar with snatch blocks and loading and unloading cars off a trailer. I agree with you I like chaining a car/truck to the trailer by the frame rather than the tire straps seems like they move around and bounce more with the tire straps. Have a great weekend. God Bless!!!
nashguy207 The suspension is free riding if the vehicle is only secured at the wheels.
I'M very well aware of this I have towed many cars over the years.
Blake, love your Ram. It must feel real good using it now.
If the brakes or e brakes dont work I would use a second winch to control the descent offloading the car. Last thing we need is a freerolling car get enough momentum to crash into people or property. Awesome video. Love that you use multiple snatchblock to route the cable away from car. I too love my mini clusters, have one each reel on my wrecker. They save me valuable time on recoveries by many minutes. I carry extra clusters for my personal rigs too with winches.
Great information Blake!
👍🏼😀
Blake as I am sure you already know, you could reposition that rear snatch block with the hook with a chain. You could also replace the hook with a chain, although personally you can never have too many snatch blocks or chains!
I could have, I just didn’t feel like setting it up.
Guy in WY i knew you knew and understand not wanting to take the time to set it up, but someone out there will not realize it and think it can not be done. Have a great day!
Great update, Blake. #MoreLater
Mount some 1/2" diameter steel "D" rings on the front and back of the trailer. Never have too many mounted if you move any type of equipment.
Got a few miles on the new ram: liking it so far?
So far so good!
Cool video thanks!
Did you do this cable method mainly so you could show folks how something like that is done? Because it seems like you could have pretty easily just put the SUV in neutral and got it rolling backwards by hand with the way the trailer was sitting and saved all the extra setup work.
Yes, this was mostly for demonstration purposes.
Thanks very helpful!
@guyinwy if I sent you a picture of the winch attach set up on a trailer I bought, would you be able to help me figure out how to and the best type of winch to install on my gooseneck flatbed?
I’ll try! Email it to guyinwy @gmail
That also seemed to control the rate of descent!
If you are building one it's a 5 dollar difference to add dul alternators
I meant to comment on one of the last videos but never did. Any way on the back seat of an 09 chevy you could take the seat loose and cut the hook thats on the seat shorter so that when it goes up it would release itself so that the back would then fold down instead of putting blocks under the seat. Hope I experience explained this good enough. If not the procedure should be on the duramax forum.
Yup, sounds like the same thing that can be done for the Ram
90 model 4 Runner. Problematic head gasket failure on the drivers side head due to Toyota having a brain fart on the exhaust crossover being behind the block and ying behind the drivers side head which translates in heat soak. How do I know this? I owned a 95 runner with the 3.0 which I loved but after the third headgasket failure it left my life like your New Holland tractor left your life. It now has a new owner who did the headgasket again and put headers on it and has driven it another 70.000 miles without a failure. I could not get 30.000 max out of a driver's side headgasket. The passenger side never failed. Wish I had it back.
Would this method work for a car with no brakes? Also if the car rolled too far back wouldn't it yank on the winch too much?
Bro where are you . Look like you in the middle no where 🤣
So, what do you do to get the transmission out of park with no battery?
The shift interlock button releases it.
To use the snatch block with a chain you will need key holes in the bed.
Charles Kettering you can always run you chain to the stake pockets on the outside of the bed of the trailer. A loop through the stake pocket and hooked to the chain will control the length of your chain and placement of the snatch block. Keyholes are very nice, but there are ways to work around not having them.
Now that you're headed out to go pick up the truck in Fort Collins don't forget to stop by Ron's equipment off of 287 take a look at the Massey Ferguson's it won't hurt you Intel old Ron that Lee sent you his way!
Sounds like the new truck is headed to Mexico!
Starting to worry about you buddy, for your expanding truck collection you've got now 😁 GuyinWY the truck hoarder !!!! At least your making money out of them, running or not, How many miles has your Ram done now Blake ? 🤔
I've been doing this for a while, just haven't talked about it. Ram is around 2400 miles right now.
Wow 😳 raking up the miles 🙂
I didn’t buy it to sit around and look pretty.
Nope, You've bought to earn money and keep the house lights on without brake downs, 👍or should that be anymore brake downs 😁
Sorry Blake thought it was on a hill
What's going on with the Ranger?
It’s in the middle of the transmission rebuild right now, then it will be sold.
Neat
Life is a struggle every day😂
Sounds like you have been watching Rotator Ron.
Charles Kettering
: Yup, that was my first thought, i.e. redirects & snatch blocks.
He floows him on Instagram
I used this system way back in the 1980's to unload boats off their trailer. A friend of mine had a rotator since around 1987.
Charles Kettering: I'm guessing most people who work with heavy loads know how to use pulleys, winches, block & tackle, ropes/chains, etc. You go back to the 80's. For me, I go back as a kid to the 1940's growing up on a dairy farm and sawmill/logging operation where my grandfather often used these tools. Back then I became fascinated with this stuff, still am...
While I didn’t learn this particular trick from Ron, I do watch all his videos and love his channel. 👍
rest a 4 inch block of wood at the top of the ramp on the trailer floor the wire will hold it down problem solved
Good idea
We're the same way old out dated equipment but don't make any money the way it is so we're just gonna keep running old equipment
U dont make any money moving cars ?
Why ?
Just push the vehicle off. lol
Delete? Delete? Delete?
Get a winch with power out
Mine has power out.
If your winch has power out why would you choose to use this method?