The problems with microwaves is that the residents constantly slam the door shut and it breaks the switches. I dealt with that daily for years. The property I am at now doesn't provide microwaves and I am not upset about it.
I use Coupling Nuts are replace those plastic nuts for the toilet seats as those are always breaking. Then you can either get a wrench or a socket on them. Love the vids!
I’ve always hated glue-joint traps. I’m sure they have their pros, but they do make it harder to work on if the line has to be snaked or if something gets caught in the trap.
@dustinbartlow4318 There are three safety switches inside the microwave. When the door is opened during a warming cycle, the timing of these switches is absolutely critical. If any of the three are out of sync, it will cause a direct short and dump the breaker.Your home breaker could be weak, also.Plug the microwave into another outlet and open the door if it don't trip.That means the breaker that the microwave is on will need replacing.Door switches are easy to find and replace.
Where I work the tenants are like a cartel. One person gets a new appliance cause its beyond repair and all of sudden four of their friends are having the exact same issue.
On that sink drain all you had to do was take a piece out of the tailpiece then take that other short piece out of the wall tube , stuck the trap back on and it was done. I'd never use glue together traps bc I'm the one that has to take em apart when they get clogged but you're working is quite neat and I love watching. Just bc I've been in the field for over 26 years doesn't mean I'm done learning but man have I learned a lot haha
@@jeffbarkley3915 I used old parts from shop so I didn’t have to go get parts from Lowe’s . I understand what you are talking about but I did have the right parts to do that. Thanks for the comment
I put in a sink and drain/trap for a friend in a new build apartment, the inspector failed the drain cause it was too short between the P trap and drain. Had to be a min 2 times the dia of the pipe or it could cause a siphon. Never had a issue with it being too long. I live in an old farm house and some of the sink drains are kinda sketchy lol... but always drain and dont smell. Likley should put in a few of those vent valves but if it works I dont mess with it.
Properties need to leave use guide that says do not open door when unit is still running,turn it off first. To much amperage going through a cheap switch with an abrupt opening of the door causes arching in the switches
Microwaves need to be on a dedicated 30amp breaker but the old properties are on 15 and 20’s and yea I constantly have to deal with the same issues as you my friend and it sux.
@@Hvacmaniac97 if you have HVAC experience, you will definitely make more money than the average maintenance person. if you have experience in HVAC, definitely don’t take low dollar for the job. HVAC experience should pay 2 to 3 dollars more on average. if you’re looking to get into Maintenance, look at indeed and glass door for job listings. FYI, brace yourself for some of the worst air-conditioning conditions you will ever have to deal with most maintenance guys. Do not keep up on condenser or evaporator coils.
@Raysmaintenance thanks Ray I love your channel. I love certain channels that give back to young guys trying to be that jack of trades. I am very interested in making the switch and yeah I have applied. I've seen the worst units but then again there's always that one that raises the wtf bar! Hope we can see your new vids on the new job soon!
It amazed me when I first got in this business what people actually leave behind when they vacate a rental. Clothes, toys, war medals, decorations, electronics, furniture etc. I’ve sold and/or kept so much stuff you could start a consignment shop.
Magnetron is the component that transmits the microwaves. Heating calls should tic up today. Wind Chill is -20°F in the Chicago Area. Stay well and be safe.
The problems with microwaves is that the residents constantly slam the door shut and it breaks the switches. I dealt with that daily for years. The property I am at now doesn't provide microwaves and I am not upset about it.
I use Coupling Nuts are replace those plastic nuts for the toilet seats as those are always breaking. Then you can either get a wrench or a socket on them. Love the vids!
I’ve always hated glue-joint traps. I’m sure they have their pros, but they do make it harder to work on if the line has to be snaked or if something gets caught in the trap.
I work for a Residence Inn in Minneapolis as an Engineer. GE microwave door switches always going out or the turn table motors.
Sometimes when I open my microwave before the timer runs out causes the breaker to trip. Could these switches going bad cause this?
@dustinbartlow4318
There are three safety switches inside the microwave. When the door is opened during a warming cycle, the timing of these switches is absolutely critical. If any of the three are out of sync, it will cause a direct short and dump the breaker.Your home breaker could be weak, also.Plug the microwave into another outlet and open the door if it don't trip.That means the breaker that the microwave is on will need replacing.Door switches are easy to find and replace.
@matthewsappa5395 thanks for the info!
Where I work the tenants are like a cartel. One person gets a new appliance cause its beyond repair and all of sudden four of their friends are having the exact same issue.
On that sink drain all you had to do was take a piece out of the tailpiece then take that other short piece out of the wall tube , stuck the trap back on and it was done. I'd never use glue together traps bc I'm the one that has to take em apart when they get clogged but you're working is quite neat and I love watching. Just bc I've been in the field for over 26 years doesn't mean I'm done learning but man have I learned a lot haha
@@jeffbarkley3915 I used old parts from shop so I didn’t have to go get parts from Lowe’s . I understand what you are talking about but I did have the right parts to do that. Thanks for the comment
Great video, lots of information. Cool tool ! Thanks for sharing ! Have a blessed day!
I put in a sink and drain/trap for a friend in a new build apartment, the inspector failed the drain cause it was too short between the P trap and drain. Had to be a min 2 times the dia of the pipe or it could cause a siphon. Never had a issue with it being too long. I live in an old farm house and some of the sink drains are kinda sketchy lol... but always drain and dont smell. Likley should put in a few of those vent valves but if it works I dont mess with it.
16:57 magnatron is what it is 🙂
The magnetron Ray .
Thanks Ray. Stay warm and have a great day man.
Thanks for the support! I hope you have a good day too!
Properties need to leave use guide that says do not open door when unit is still running,turn it off first. To much amperage going through a cheap switch with an abrupt opening of the door causes arching in the switches
Yeah that sucks I use to get calls about garbage disposal luckily we didn't have microwaves at the property I worked for awesome video bud
Good day Ray and hugs to the puppies
Microwaves need to be on a dedicated 30amp breaker but the old properties are on 15 and 20’s and yea I constantly have to deal with the same issues as you my friend and it sux.
Whats a big piece of advice for someone venturing into this role with their career in hvac.
@@Hvacmaniac97 if you have HVAC experience, you will definitely make more money than the average maintenance person. if you have experience in HVAC, definitely don’t take low dollar for the job. HVAC experience should pay 2 to 3 dollars more on average. if you’re looking to get into Maintenance, look at indeed and glass door for job listings. FYI, brace yourself for some of the worst air-conditioning conditions you will ever have to deal with most maintenance guys. Do not keep up on condenser or evaporator coils.
@Raysmaintenance thanks Ray I love your channel. I love certain channels that give back to young guys trying to be that jack of trades. I am very interested in making the switch and yeah I have applied. I've seen the worst units but then again there's always that one that raises the wtf bar! Hope we can see your new vids on the new job soon!
Yep, in the end all the “ stuff” we thought was important in life goes in the dumpster, FACT!
It amazed me when I first got in this business what people actually leave behind when they vacate a rental. Clothes, toys, war medals, decorations, electronics, furniture etc. I’ve sold and/or kept so much stuff you could start a consignment shop.
Hey Ray are you still doing the live stream tonight ?
@blakegentry7624 yes it will be around 8 or 9 pm
That’s one thing about Maintenance you can get stuck working on one type of thing for weeks😂
Facts. Going through the same thing right now with water heater replacements.
Magnetron is the component that transmits the microwaves.
Heating calls should tic up today. Wind Chill is -20°F in the Chicago Area.
Stay well and be safe.
@tomn4838 it's not too bad today-- slight wind at about 16° outside
The most I ever spent on a water bill was a hundred and change for a whole ranch house
ROFL -3 isn't cold, try WPG winter -48 with windchill
The Flux Capacitor 🎉🏴☠️ / Microwaves 🫥
What was that tool called
@@jackiekidd4608 Appion CCT14 Core Control Tool 1/4in Female to 1/4in Male
Goof morning ray hope you have a good day
👍👍👍👍👍💥💥💥💥💥💡💡
Pull a Trump on that toilet seat, make it GREAT again, lol.
Keep em coming Ray.
Trump 2028!!! (2 CONSECUTIVE terms)
I take a Big Trump every morning.