I did this with my HP 6960 cartridges. I just did what the video showed me to do. I did not have the exact printer ink colours for the printer, but I had some Candid solo printer ink black and colour ink refills I had not used for so many years. I did not fill these over the top of the cartridge in case the ink would of spilled from the cartridge into the printing machine itself. I did however did a printing cartridge ALIGNMENT TEST AND A PRINTING SMEAR TEST after I refilled the ink cartridges. The test were both successful. The HP Printer OfficeJet Pro 6960 printer screen still looked like the cartridges were half empty but I am not going to fill them further to the top if needed. If anyone is going to do this method and refill your cartridges manually, I would suggest fill them like the video is showing from above but fill them at a respectful level, not over flood your cartridge that is spills the tops of the cartridge. If you do see a spillage coming from the tops of your cartridges, just wipe the tops (or the excess) and if there is a over spillage from the bottoms of your cartridges just do the same and give them a general wipe to. This should help with the filling of your ink cartridges. I did this on my first go, I used the paper towels though, much easier to clean any excess ink fluid and to wipe any printer ink from the surfaces you were using. I did get black ink on my hands, not majorly but just little spills from the ink cartridge and from the paper towels I was using. I was using CANDID SOLO PRINTER INK BLACK AND COLOUR refills to do the method shown above. This trick does work, but will see if I can buy some HP Printer Ink refills and colour for next time, after I finish off with the other brand first. Hope this will help for those who want help with their HP cartridges and those who just want to read my comment to get some general help with their cartridges. Matt
@@ppassman7439 Hi P Passman, Matt here. Thanks for the reply. I did not do the "curved metal" thing when I did fill the cartridges. I just got my Candid ink jet refill for example, for the black one, I put the cartridge upside down, then just used the black refill ink and then just squeezed-dropped the ink into the black cartridge as shown on the UA-cam video. I don't know how to configure the ink settings or that I don't want to stuff up the cartridges any further. Again if you do get the refills, whatever printer refill branding you get, I am sure this will work on your HP cartridges. Also fill them at a respectful level. I WOULD NOT FILL THEM TO THE TOP IN CASE OF A OVER SPILL IN THE CARTRIDGE. On your HP Printer Cartridge Display, after you have refilled your cartridges to a respectful level, BUT YOUR HP PRINTER CARTRIDGE DISPLAY IS SHOWING YOUR PRINTER LEVELS LOOK LOW OR QUARTER FILL, I WOULD SIMPLY IGNORE THIS MYSELF. ONLY YOU KNOW HOW MUCH INK YOU HAVE PUT IN YOUR OWN PRINTER CARTRIDGES. USE GOOD JUDGMENT HERE. Hope this helps. Matt
@@matt-nz3739 Thanks for the reply. Please is it the HP 912 that you refilled filled without the curved metal or the HP 912XL? I understand you must use the curved metal when re-filling the HP 912XL?
@@ppassman7439 Thanks again for the reply. My printer is HP OfficeJet 6960. I don't know the exact printer number cartridges off by hand, but I just followed the video by using the printer ink refills that I did have and just drip fed the ink into the cartridges to a respectful level. On the printer screen, this still showed I had low level ink in the cartridges but I did put enough printer ink in these cartridges to be used for using the printer to be used for next time. Hope this helps. I did not have a "curved metal" part whatever you are meaning. On the video, the person filling the ink cartridges showed having a like a "metal squeezy tube", if you can call it that, on top of the bottle to drip feed the ink into the cartridges. Matt
@@matt-nz3739 Sorry, I think it's my mistake. The correct video is the 2nd part of this one. It is here--ua-cam.com/video/RlfTFfYxGqI/v-deo.html. The curved metal part started at timeline 2.30 in the video. The video is for filling only the XL (that is the HP large capacity cartridges). Your Officejet 6960 uses the HP 903 cartridges and they come in two sizes. The standard size is HP 903, written on the cartridge and the X-Large capacity cartridge is the HP 903 XL. It appears it is the HP 902 standard cartridge that you filled without the curved metal? According to the video, it looks like all the HP 903 standard cartridges can be filled normally without the curved metal and the curved metal procedure must be used for the XLs?
Purchased on the 9 Nov 20 arrived 17 Nov 20. I followed the excellent video and all went very well. Reason for purchase: I feel I am being blackmailed by HP to pay their prices, there was little or no stock of the product from HP I wanted. All my regular suppliers had next to nothing available. The alternatives wanted to charge extortionate prices. Not interested in the pay per copy idea as I have a huge variance in numbers I want to print. True the printer will not tell me the ink levels, but as I now have a reservoir of ink in stock i'm not really bothered, I think I will be able to tell when the print goes 'off' a bit! And the price? Well lets just say I will be going back to Refill House when I need another supply, it might be a while though!
@@floydlholt9829 I almost didn’t purchase the 8020 because of the expensive ink cartridges. But I’m glad I did because I’ve noticed that refilling them is easy , cheap and it works. The printer even recognizes the ink levels of the ink I’ve added . Magenta and yellow were totally depleted and now the bar shows the ink I’ve added. I wonder how many times I can refill the 910 cartridges before they’re rejected by the printer.
I use HP910 ink. I was only able to refill my cartridges 3 times then it won’t print anymore and had to buy HP910 ink. Getting refill 3 times is still cheaper than buying HP ink every time.
J A there’s no reason why it should stop working after 3 refills. I’ve refilled mine more than that and still prints. If you setup your printer HP will automatically stop you from using refilled cartridges even if they are HP that you refilled. When you setup your printer you acknowledge that you will only use new HP cartridges when they are depleted.
For hp 8020 or similar, make sure you run 2 time head cleaning cycles, and you can use it after , I did the dripping, it work great now , error message still showing ,
i’ve tried it and it worked on me, i can print well. but the cartridge indicator didn’t update and always show “low ink”. any how to update the indicator?
because this specific kind of cartridges have that opening in the bottom, what makes the refilling process easier. Other cartridge models have to be drilled in the top in order to refill them.
Question. How about the chip on the cartridges. Doesn't it have to be adjusted somehow? Because I suppose it will show empty when the cartridge will be full.
bought this, inserted ink, but cartridge does not print and ink levels have not changed. Can you advise if you know how to fix? Cartridge was empty when it was filled.
@@djrxtr Ink level The ink level of the ink cartridge is continuously decreased after printing, and the ink level after the drop will never return to the full. Once the ink cartridge is filled, you do not need to change the ink cartridge as long as it can be cleaned and printed. If the printer refuses to continue to use the ink cartridge (Depleted), you may need to replace it with a new one or purchase and install a decoder chip to continue printing. Modification of Printer Head Vents After cleaning many times, the quality of the printed quality page is not better. It is recommended to modify the Printer Head Vents under the annular seal 44. Please use a caulk glue, which is filled into the pores and repair with a thin needle tube and seals the air hole 62 air hole under the annular seal 44. The caulk glue is a type of transport contraband that you need to purchase locally. The air hole 62 under the annular seal 44 is recommended to be printed at a minimum of six hours after patching with caulk glue.
the HP902 does not track ink level , it tracks pages used. That is used to calculate the ink level. The officejet pro has a setup that should allow you to stop paper usage.
I tried both way but it leaking to much! I even put tape on it, when I tried to put after I finished filling them up it keep sawing less ink instead of full one! Is that normal?
I did this with my HP 6960 cartridges. I just did what the video showed me to do. I did not have the exact printer ink colours for the printer, but I had some Candid solo printer ink black and colour ink refills I had not used for so many years. I did not fill these over the top of the cartridge in case the ink would of spilled from the cartridge into the printing machine itself. I did however did a printing cartridge ALIGNMENT TEST AND A PRINTING SMEAR TEST after I refilled the ink cartridges. The test were both successful. The HP Printer OfficeJet Pro 6960 printer screen still looked like the cartridges were half empty but I am not going to fill them further to the top if needed.
If anyone is going to do this method and refill your cartridges manually, I would suggest fill them like the video is showing from above but fill them at a respectful level, not over flood your cartridge that is spills the tops of the cartridge. If you do see a spillage coming from the tops of your cartridges, just wipe the tops (or the excess) and if there is a over spillage from the bottoms of your cartridges just do the same and give them a general wipe to. This should help with the filling of your ink cartridges. I did this on my first go, I used the paper towels though, much easier to clean any excess ink fluid and to wipe any printer ink from the surfaces you were using. I did get black ink on my hands, not majorly but just little spills from the ink cartridge and from the paper towels I was using.
I was using CANDID SOLO PRINTER INK BLACK AND COLOUR refills to do the method shown above. This trick does work, but will see if I can buy some HP Printer Ink refills and colour for next time, after I finish off with the other brand first.
Hope this will help for those who want help with their HP cartridges and those who just want to read my comment to get some general help with their cartridges.
Matt
Hi, I noticed the guy pushing a curved metal into the black cartridge before re-filling the HP 912 cartridge video. Did you also do that?
@@ppassman7439 Hi P Passman, Matt here. Thanks for the reply. I did not do the "curved metal" thing when I did fill the cartridges. I just got my Candid ink jet refill for example, for the black one, I put the cartridge upside down, then just used the black refill ink and then just squeezed-dropped the ink into the black cartridge as shown on the UA-cam video.
I don't know how to configure the ink settings or that I don't want to stuff up the cartridges any further. Again if you do get the refills, whatever printer refill branding you get, I am sure this will work on your HP cartridges. Also fill them at a respectful level. I WOULD NOT FILL THEM TO THE TOP IN CASE OF A OVER SPILL IN THE CARTRIDGE. On your HP Printer Cartridge Display, after you have refilled your cartridges to a respectful level, BUT YOUR HP PRINTER CARTRIDGE DISPLAY IS SHOWING YOUR PRINTER LEVELS LOOK LOW OR QUARTER FILL, I WOULD SIMPLY IGNORE THIS MYSELF. ONLY YOU KNOW HOW MUCH INK YOU HAVE PUT IN YOUR OWN PRINTER CARTRIDGES. USE GOOD JUDGMENT HERE.
Hope this helps.
Matt
@@matt-nz3739 Thanks for the reply. Please is it the HP 912 that you refilled filled without the curved metal or the HP 912XL? I understand you must use the curved metal when re-filling the HP 912XL?
@@ppassman7439 Thanks again for the reply. My printer is HP OfficeJet 6960. I don't know the exact printer number cartridges off by hand, but I just followed the video by using the printer ink refills that I did have and just drip fed the ink into the cartridges to a respectful level. On the printer screen, this still showed I had low level ink in the cartridges but I did put enough printer ink in these cartridges to be used for using the printer to be used for next time.
Hope this helps. I did not have a "curved metal" part whatever you are meaning. On the video, the person filling the ink cartridges showed having a like a "metal squeezy tube", if you can call it that, on top of the bottle to drip feed the ink into the cartridges.
Matt
@@matt-nz3739 Sorry, I think it's my mistake. The correct video is the 2nd part of this one. It is here--ua-cam.com/video/RlfTFfYxGqI/v-deo.html.
The curved metal part started at timeline 2.30 in the video. The video is for filling only the XL (that is the HP large capacity cartridges).
Your Officejet 6960 uses the HP 903 cartridges and they come in two sizes. The standard size is HP 903, written on the cartridge and the X-Large capacity cartridge is the HP 903 XL. It appears it is the HP 902 standard cartridge that you filled without the curved metal?
According to the video, it looks like all the HP 903 standard cartridges can be filled normally without the curved metal and the curved metal procedure must be used for the XLs?
Purchased on the 9 Nov 20 arrived 17 Nov 20. I followed the excellent video and all went very well. Reason for purchase: I feel I am being blackmailed by HP to pay their prices, there was little or no stock of the product from HP I wanted. All my regular suppliers had next to nothing available. The alternatives wanted to charge extortionate prices. Not interested in the pay per copy idea as I have a huge variance in numbers I want to print. True the printer will not tell me the ink levels, but as I now have a reservoir of ink in stock i'm not really bothered, I think I will be able to tell when the print goes 'off' a bit! And the price? Well lets just say I will be going back to Refill House when I need another supply, it might be a while though!
Must be talking about the 910 ink cartridges. They're selling for $50 per cartridge out here in California. No way I'm paying those prices.
@@floydlholt9829 there are definitely expensive 😳 😑 😫
@@xHustleHaRdx YEAH ITS CRAZY, thats why im here.
What’s your printer model and is there anything you would like to add to your review??
@@floydlholt9829 I almost didn’t purchase the 8020 because of the expensive ink cartridges. But I’m glad I did because I’ve noticed that refilling them is easy , cheap and it works. The printer even recognizes the ink levels of the ink I’ve added . Magenta and yellow were totally depleted and now the bar shows the ink I’ve added. I wonder how many times I can refill the 910 cartridges before they’re rejected by the printer.
I use HP910 ink. I was only able to refill my cartridges 3 times then it won’t print anymore and had to buy HP910 ink. Getting refill 3 times is still cheaper than buying HP ink every time.
hey, i use hp 910 but i cant find the drivers how did you install ?
J A there’s no reason why it should stop working after 3 refills. I’ve refilled mine more than that and still prints. If you setup your printer HP will automatically stop you from using refilled cartridges even if they are HP that you refilled. When you setup your printer you acknowledge that you will only use new HP cartridges when they are depleted.
That's normal for all HP cartridges; sometimes not even three refills.
For hp 8020 or similar, make sure you run 2 time head cleaning cycles, and you can use it after , I did the dripping, it work great now , error message still showing ,
How do I find that, the head cleaning?
@@chearose2905 is a automatic program that run through the machine itself , you just have to find that button , google it
on my hp officejet 8015 after installing refilled cartridges, the cartridge carriage freezes and does not even get to the menu.
- It is very easy to refill ink in the cartridge using the Refill House kit, right grandma?...grandma?
- Zzzzzzzzzz
Hi there... are still swlling the ink & cartridges..? We need it for HP Designjet T1700dr.. Is it available..?
Provato, mi ha stampato solo tre fogli perfetti..poi tutti sbiaditi ..consigli?
i’ve tried it and it worked on me, i can print well. but the cartridge indicator didn’t update and always show “low ink”. any how to update the indicator?
You can’t update the indicator unless you buy new cartridges
@@Orlanzepol123 why..buying all time new cartige is expensive
@@zahidkhan1394 I agree
@@Orlanzepol123 so what os the solution...how to update indicator
@@zahidkhan1394 you can buy a new cartdrige and disable the store anonymous info in the printer setting it wont update after that
You have to see how many gram will take ink not to over flow
Why do other videos show filling from the other side under the label?
because this specific kind of cartridges have that opening in the bottom, what makes the refilling process easier. Other cartridge models have to be drilled in the top in order to refill them.
Vous avez fait les quatres ou juste la noire
That’s exactly how I refill mine.
any know where i can get empty 910 cartridges?i have ink i just need something to put it in
Question. How about the chip on the cartridges. Doesn't it have to be adjusted somehow? Because I suppose it will show empty when the cartridge will be full.
The chip wont allow printer to work if on instant ink program, but it will outside of the program.
@@section8tampaso can you attend the free trial and after that use other cartridges?
@@section8tampaMais comment ?
super. thank you. can we do the same for 912xl black or color?
more info, please link www.refillhouse.com/index.php?route=product/product&path=25_30&product_id=192
I am use injection series?
wil this work on y HP920 ?
請問我的是915xl墨盒，是不是全部四款顏色盒子都要鑽孔充墨？謝謝。
如果要填到XL容量，就要鑽孔或推掉原廠的鋼珠
可以填小容量
那麼有沒有推掉鋼珠教學？
@@jwfchan4501 你要有相同的塞子，或是鑽孔及規格相同的塞子
www.refillhouse.com/index.php?route=product/product&path=25_30&product_id=192
My ink is just coming out of the bottom as I’m filling it
bought this, inserted ink, but cartridge does not print and ink levels have not changed. Can you advise if you know how to fix? Cartridge was empty when it was filled.
please link our instruction
www.refillhouse.com/index.php?route=product/product&path=25_30&product_id=192
Unless you can find a way to change the chip, you are fucked. Thanks HP
@@djrxtr Ink level
The ink level of the ink cartridge is continuously decreased after printing, and the ink level after the drop will never return to the full.
Once the ink cartridge is filled, you do not need to change the ink cartridge as long as it can be cleaned and printed.
If the printer refuses to continue to use the ink cartridge (Depleted), you may need to replace it with a new one or purchase and install a decoder chip to continue printing.
Modification of Printer Head Vents
After cleaning many times, the quality of the printed quality page is not better. It is recommended to modify the Printer Head Vents under the annular seal 44.
Please use a caulk glue, which is filled into the pores and repair with a thin needle tube and seals the air hole 62 air hole under the annular seal 44.
The caulk glue is a type of transport contraband that you need to purchase locally.
The air hole 62 under the annular seal 44 is recommended to be printed at a minimum of six hours after patching with caulk glue.
the HP902 does not track ink level , it tracks pages used. That is used to calculate the ink level. The officejet pro has a setup that should allow you to stop paper usage.
@@djrxtr ua-cam.com/video/2DJQLUeTBfA/v-deo.html
請問你們的補充墨水跟原廠墨水相容嗎？ 是不是防水不暈染？
是防水墨水,與原廠相容
From 1:40 skip to 4:17
Thanks!
@refill house what is the song called?
how to reset ink level when refill this cartridges?
No reset is required, can be filled
To see the ink level, you need to replace the chip
Me gustaría comprar un sistema de recarga con este pero el problema es que si lo compro perderé la garantía
Sólo entiendo espanol
@@candidomunozmorillo576 no garantia con China , tu sabes. jajajaja
Were can I find one for HP Office jet pro color printer?
we can offer you more detaills,contact me Krystal : Whatsapp+ 86 18002847197 Skype : Krystal fu+86 180 0284 7179
I tried both way but it leaking to much! I even put tape on it, when I tried to put after I finished filling them up it keep sawing less ink instead of full one! Is that normal?
Please note that at 3:52, the ink is about to fill up; if it reaches 4:48, it will obviously continue to leak some ink.
随机的墨盒能重新填装吗
可以的
is this the peppa pig theme song?
I forgot, my printer is a hp OfficeJet Pro 8023
It's made my pages image smear....
HP 8022不行
沒有問題的
@@refillhouse我滴进之后打印不出，还是显示没墨