How to Replace Power Steering Pressure Hose Line 07-16 GMC Acadia
Вставка
- Опубліковано 24 тра 2018
- For More Info visit us at: 1aau.to/h/DA/
In the video, 1A Auto shows how to replace a leaking power steering hose. The video is applicable to the 07, 08, 09, 10, 11, 12, 13, 14, 15, 16 GMC Acadia.
This process should be similar on the following vehicles:
2007 GMC Acadia
2008 GMC Acadia
2009 GMC Acadia
2010 GMC Acadia
2011 GMC Acadia
2012 GMC Acadia
2013 GMC Acadia
2014 GMC Acadia
2015 GMC Acadia
2016 GMC Acadia
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/orA/1AXAA00013
• 10mm Wrench 1aau.to/oeR/1AXAA00010
• 17mm Wrench 1aau.to/oeR/1AXAA00010
• Complete Metric Socket Set 1aau.to/ohP/1AXAA00043
• Channel-Lock Pliers 1aau.to/oaL/1AXAA00139
• Needle nose pliers 1aau.to/ocJ/1AXAA00051
• Needle nose pliers 1aau.to/ocJ/1AXAA00052
• Wire Cutters
• 1/2 Inch Breaker Bar 1aau.to/obm/1AXAA00078
• Ratchet 1aau.to/os8/1AXAA00016
• Socket Extensions 1aau.to/orG/1AXAA00015
• Torque Wrench 1aau.to/okL/1AXAA00044
• Brake Parts Cleaner
• Cloth Rags 1aau.to/ocD/1AXSS00035
• Marker / Writing Utensil
• Paper Towels 1aau.to/ocD/1AXSS00035
• Transmission Fluid
• Drain Pan 1aau.to/ob6/1AXAA00320
• Floor Jack 1aau.to/ofn/1AXAA00068
• Jack Stands 1aau.to/oeZ/1AXAA00065
• Pick 1aau.to/odv/1AXAA00037
Subscribe: / @1aauto
Check out our playlist:
2007-2016 GMC Acadia, Chevy Traverse, Buick Enclave: • 2007-2016 GMC Acadia, ...
For More Info visit us at 1aau.to/h/DA/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - Авто та транспорт
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
One of the best step by step how-to I’ve ever seen. Very nice job.
This was an excellent tutorial with awesome explanation and sweet camera angles so I could really see what was going on. Top notch as usual!
Best bleeding process I’ve seen yet without housing a tool awesome
this is probably the best illustrative way of doin a steering hose job. you guys rock. keep it up!!!
Great video I really appreciate it, helped a lot.
I really don't understand why these manufacturers don't include the brackets and the grommets with the line. The whole reason why I need to replace mine is because the rubber grommet under bracket that goes around the rubber part of the line on the firewall side ripped from wear and tear and because of that there was nothing protecting the rubber tube and the bracket cut into the tube and cause a leak. I could not find this rubber grommet anywhere in any of the parts stores.
In addition the bracket on the front side of the motor was broke where the bolthole is that secures it to the motor. Here again I could not find this bracket anywhere.
Chances are when you replace the pressure line you're probably going to have to replace something with those brackets to so the fact that they don't include this is ridiculous.
Just did my 2013 Traverse which is the same platform, went very smooth after watching video. Tall trans funnel does not work on windy day...what a mess. Easier to top off PS tank and run for 2 seconds then refill and repeat. Just fine after 3rd time.
Thanks for yet another awesome video 1A Auto!
Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com +Jeff Somers
I am planning to do this repair in my traverse 2012. FYI, I called the dealership, they said it would cost $ 98.99 + 5 hours of work = ~1000. Excellent video BTW.
Wow - The BEST video presentation on a repair I have seen. Thanks !!!
You guys do an excellent job on describing what is involved in repairs on vehicles. Love your videos.
Thanks for the vid- took me 4 hours to replace this-
THANK YOU!!! Just did this hose, and a new pump on a 2012 Buick Enclave.
Thanks a lot! Very good job.
Nice. I got the same issue with my Chevy Traverse.
I had a 2008 Saturn Vue with the 3.6 V6 then I changed my pressure hose and what I noticed was it leaked right near where the hose gets close to the exhaust or catalytic converter My guess being the pressure side there's high pressure in there also an increase temperature due to the pressure increase of the fluid plus the exhaust temperature just weaken the hose in that area would you say that it's the exact same case of leak for this hose too?
do the 2017 gmc models have this problem?
Very well made video. 👍
Thank you for the feedback! +khaiyamfarhad
Hello, hey I have a 2012 Chevy Traverse LT trying to put the power steering pump on and I'm having the trouble that when I drop the subframe on the passenger side it's only going down two of the four in required to pull the power steering pump. Can you think of anything I could have done wrong?
What about the cup seals? The yellow caps, the teflon or the o-ring???
Thank you so much.
+Wayne Gosson Thank you for watching. 1aauto.com
Awesome video sir. Does this procedure apply to 2009 Chevy traverse? Tkx again
+Bobby Benn This procedure might be different for your application. We do not currently have a how-to video for this particular year, make and model. Thank you for asking! 1AAuto.com
Does the car need to be on a lift to replace pressure hose?
i would love to meet the brilliant mind that dreamed this terrible design up!!!!!! Have you ever worked on a vehicle? Or are you straight out of engineering school!
You guys rock
Thanks for checking us out. 1aauto.com +Closdmon1400
2017 GMC Terrain. Would the power steering assembly be much different then this video ?
+Wayne Gosson This procedure might be different for your application. We do not currently have a how-to video for this particular year, make and model. Thank you for asking! 1AAuto.com
How can I get the pressure line off the bolt won’t budge
After watching this video and people comments. I was very worried it was going to be a tough job, but guess what. I dodged a bullet. I figured since my leak was under the front bumper. End up being the power steering cooler. Phew!!!
Im just curious how long did that job take cuz damn the location is a pain in tje.. 😅
Would this be the same procedure for a 2017 Traverse? I am not seeing a video for a 2017.
I hope so... I'm about to try this now.
that is a 7 hour job at a dealer but to be fair i probably takes longer to bleed the air out than replace the line. those things suck to get the air out off
+UBBERTANKER Thanks for checking us out! 1AAuto.com
My o ring didn’t come out with the flare nut... I can’t figure out how to get it out without removing the whole pump :(
I have a 08 sport equinox 3.6L. Is it about the same process
+chevykillerb This procedure might be different for your application. We do not currently have a how-to video for this particular year, make and model. Thank you for asking! 1AAuto.com
2.5hrs later, a full box of Kleenex for my tears, and scraped up arm, it's bloody done... What a struggle, but a task even a big guy can manage.
Shop quoted us $1100 to install this $65 part
anyone know the size of the o ring? @ 5:15
How much would this service cost, because I think this is going on with my O9 AWD Acadia.
Did you ever get this done? Wife's '16 Enclave was quoted ~$1200 from the dealership for this....😳
2012 acadia repair at local shop for me $675. Pressure line hose $79, fluid $7, supplies $3. 5.70 hour job at $102/hr
Do it yourself, labor book says 5.7 hours for AWD because GM says the transaxle and catalytic converter has to come out. Shops are going to charge this rate
@@lgldrgdlr it’s because GM says the transfer case and catalytic converter has to come out, obviously it doesn’t have to but this is what they will go by, calls for 5.7 hr
What part number is that hose?
+nathan uy The part # for the power steering pressure hose for the 2019 GMC Acadia is 1ASPP00172.
Not sure why this is a 6 hour book time…