F6 E1 Whirlpool Oven Error Code Repair
Вставка
- Опубліковано 10 вер 2024
- My oven had a problem and set an F6E1 code, here's how to fix it yourself.
Here's all the stuff you'l need to fix it:
Tools:
Soldering Iron Kit: amzn.to/46XurMV
Flux Pen: amzn.to/3NvRreX
#2 Phillips Screwdriver: amzn.to/3v3RqZi
Pocket Screwdriver / Pocket Pry Bar (Set): amzn.to/4am8TfJ
Control Board: partsdr.com/pa...
Relay: teamequip.com/...
(Amazon Affiliate Links, I may earn a small commission at no cost to you from purchases made through these links)
Excellent job.
You can use solder wick to clean pin holes that the solder sucker missed. Also, always screenshot all external hookups to control board for further reference. 👍
Thanks for the video. Particularly the test mode which reveals the relay failure. Also the reminder to check plug locations is super helpful. I am surprised that they don't make them different to error proof them. Thanks again!
Because of your video I received no less than 7 “Hoorays for Daddy”. Thank you
Thank you for this very informative and easy to follow video! Your video saved my Easter dinner..❤
Glad it was helpful!
Put your soldering iron on each of the pins on the back while you pry from the front gently and it will come right out.
Thanks!
Mine did this today! Can you tell me where you ordered the relay from?
Nevermind, In description! Haha you rock
I have a Whirlpool range with same problem, I pulled the relay cover off (power unplugged) and it was burned out like yours, however I pulled the covers off the other two relays and the relay to the right no.2 was also burned out. So I just ordered a new control panel for 201.54 plus expedited shipping of 33.00 from the parts company you gave info for. Thank you ! Will let you know how it went. Anymore problems with the range and I’ll trash it since it’s maybe 4 years old, pretty sad really. I’m interested in an induction oven since I don’t have gas now which I had in all of my last three houses. Gas is my preference by far, the manufacturers should have improved them over all these years since now they are on the hit list for extinction.
To convert to gas would be a huge undertaking since it’s on the other side of the house and why they didn’t run it when the house was first built is because of the cheap builders. We are second owners.
Ok, I received the new control panel and super easy install, all color coded connectors. Oven is now operating😊
Yea it's pretty disgraceful these things only last a few years. Glad you got it working!!!
My oven doesn't have two elements and it's made this way. It's a whirlpool accubake electric oven. It's take a very long to preheat if gets there at all.
If your oven has a bake button and a broil button your oven has two elements just that the bake element is hidden away under the lower pan out of sight.
I'm an automotive tech not an appliance guy, so I'm not sure how to best advise you.
Great tutorial. Is there a way for me to test the relay with a multimeter before removing it?
Not really, 220v ac is not something you should be poking test probes into, the test procedure I showed and the follow up visual inspection should get you what you need to know.
How did you remove the orange cover on the sensor?
It's a relay not a sensor, but it just pops on, in this case it about fell off in my hand because it was burnt and partially melted. they aren't supposed to come apart but if you lightly grab the top of it with pliers it will come off.
Is there a risk to just using the electrical tape to keep the flap open or some other means to keep the flap open? Does it take the broil feature away?
If you fold the top flap up it will come off completely
electrical tape puts an open into the broil circuit, removing the tab would have the same effect. It's not a permanent fix, it's just a way to make the oven somewhat usable while you wait on the part to show up.
@@RogueWrenching it's permanent for mine 😂
Hi! Having the same problem with the same stove. Burnt dinner last night! How do I get the orange relay cover off and can you post the part number? Mine is faded and I can't read it. Thanks!
The relays should all be the same. The cover isn't supposed to come off. Mine broke off. Just pry it off with pliers. The part numbers should be the same across all 3 relays.
TE Connectivity RZHH-1A4-D012 Power Relay T166826
Where did you get the new relay from?! I can’t find a matching number online, or when I do I need to bulk order 3000! Thank you kindly.
OMG you are a life saver!! I am so glad I found this video. I bought a Multimeter to start tracking down the problem, but now, I don't even need it. It went out right before my back surgery, so bending down to check with the meter was going to be really hard on me. Trading for a soldering iron! Literally dropped jaw watching you take the soldering off, so cool. Thank you so very much. 🫶
Bro, excellent fucking video.
Can I take that silver piece out that’s suppose to open back up
It's just screws in the back, the trick is to flex the bottom upwards to get the back panel out.
Are you talking about the little flap at the top of the relay, where he said to put the tape? I took that out instead of putting in the tape and so far it has worked for me. I'm still waiting on the new relay. Thanks @RogueWrenching super helpful video!
@@brandonberthiaume3690I was wondering if I could just take that little flap out as well.. did that work fine until replacement?