How to Troubleshoot and Fix the F-09 Error Code (LG Gas Oven)
Вставка
- Опубліковано 5 жов 2024
- How to Troubleshoot and Fix the F-09 Error Code (LG Gas Oven)
Replacing the EBR60969206 Power Control Board was the fix for me! This will vary from model to model.
EBR60969206 Control Board - amzn.to/2YYv4D9
Digital Meter - amzn.to/2yc0Mlj
#Howto #F09 #GasOven
One trick we use when error F-09 shows up while trying to bake is to switch off, then start broil on hi until it heats for ~2 minutes. Then Clear/off the broil cycle, and start baking at your desired temperature. Seems to bake okay after this silly process.
Probably a big clue in this trick as to the origin of the initial bake preheat failure, but I haven't dug into it yet. Good luck.
Matt Thanku u saved Thanksgiving
Matt, Did you figure out the problem? We have same issue. Your solution works for now.
Thank you Matt!!!!! You saved a order I had for a client🙏🏼
I get the F09 code but I can see the oven burner is on. The temp reading stays on 100 until the code appears a minute or so later. Suggestions?
no need to check every component. just check the voltage on the hot surface ignitor if you have voltage then its the hot surface ignitor if you have no voltage its the board. makes your life easy
I've had problems with every single LG appliance that I have ever bought and have had to fix my dishwasher, washer and now my oven. I just really wish that I never bought any of their products but unfortunately when you go to the stores they stand alongside other premium models and they're usually priced just a little lower making them seem like a good buy. They just really make shiny products with all of the bells and whistles but are really not durable and dependable long term.
DensterNY I’ve had this LG oven worked on so many times that they are finally replacing it. LG sucks
I’ll never pay money for anything they make. Ever again.
I hear you! LG appliances have a nice appearance, but operation sucks. And try to get a service tech! Good luck. LG will not allow local repairmen access to their parts, so you have to go through LG for service!! Our LG appliances are 2 years old. The LG dishwasher electronic panel went at 2 months. We ended up replacing it with another brand dishwasher. Now our LG range needs the oven control panel replaced. The oven isn't heating as the ignitor needs to be replaced. Obviously we will be purchasing another brand of oven. LG sucks!!
Nothing works great unless you drop couple grand
Thank you so much for taking the time to go over this!!! So easy to understand and very informative...so very helpful!!!
Glad it was helpful!
2 year old same oven fo9 code i unplugged unit for a bout 3 min. plugged back in and oven worked properly. thanks for the lesson,
Francis Mckelvey unfortunately you will be dealing with that same problem for the rest of the life of that oven
Francis Mckelvey they cannot fix it they even replaced our entire oven and we still have the same problem
Mine isn't even 2 years old yet and we're having this problem for the 2nd time.
That is what I do, I don’t even wait 2 minutes, I just turn off & back on to set the temp & it is working.
Thank you for the video. It made the repair much simpler.
Ty for this video. I have tha same one. by any chance you would do a video on the self cleaning. mine never get hot n doesn't see
to clean
Looked at a lot of videos and this is the best one.
Also you could just check voltage on bake relay.
1 major flaw is your readings. Just because your getting a reading doesn't necessarily mean the component is good. There is value for for them. Last washer i did had a tolerance from 7k to 15k on the windings from the stater. So if you saw a 2k reading, you would think it's OK. Not the case. Further breakdown is essential on alot of appliances.
Thanks! Appreciate you taking time to make this.
Awesome video man. Troubleshooting mine right now. Exact model.
I like, nice video 👍 help me than you ✌️
Thank you for your video. Can you please help us and tell us why the ignitor doesn't stoo clicking untill we turned it all the way to low for the dtove burners?
Good stuff !
That’s the code I’m getting F 09
That's great but mine is a double stove bottom is convection, is it have 2 separate relays?
Thanks, Yo Dan! Just what I needed!
I had F9 code and oven not heating. After I reset my breaker box, no more problem. I wonder how many people don't know this and are paying repairman unnecessarily.
I'm curious what model number of oven you have? We moved into a house with an older LG oven and your display looks close, if not exactly like ours. I'm having a hard time finding the settings mode since on my display doesn't have it anywhere on there to adjust the oven temp. Thanks Dan
I don't remember the model # for this. I no longer have this oven since I moved.
That PCB, EBR60969206 costs $175. Where did you find one for $60?
Thanks for the video. Unfortunately a little to much for me to handle. Lol. Going to call an appliance repair person.
Found the glowbar to be bad new glowbar resistance 103 old one 226
I dont understand why you didn't check the ignitor.
That's the problem too lmao
Definitely helped! Thank you!
That was awesome brotha 👏🏼 thanks 😊
Don't waste your time watching this video, he has no idea what components he's checking (for example door lock motor, convection fan), just because you get a resistance value doesn't necessarily indicate the component is functioning within parameters.
😂correct
What video would you recommend watching ?
Hey guys I tried this I replaced the board and the thermostat I still can get my oven to work the broil works !! Needs some help
How much was the board?
Prices are around $160+, I was luck and got it for $75 on ebay.
Where did you get the replacement part and what was the cost?
I got one off ebay for $45 + shipping.
Hi Danny is that the part number you put in your description?
Yup. EBR60969206 Power Control Board
@@YoDan turns out my F09 error was lower ignition unit
It is located inside the oven under bottom cover
Danny what was the part number for board
It's in the description EBR60969206 Power Control Board
Hey danny changed part and still have f9 code killing me lol
Have you checked every component to make sure its all good? If so, you might've gotten a bad board. :/
did u ground yourself before install??? static electrticity will damage board @@thethumpster
Danny T need some help
Please don't move camera to fast.
👍
Where did you order part from please
Ebay or Amazon. Just search it by the controller board #
If you have the same model.. here amzn.to/2YYv4D9
hi yeah same board number for sure thanks for info @@YoDan
@@YoDan board is 157.00 at encompass.com amazon is 234.00
LG is garbage. I bought the refrigerator, dishwasher, microwave and stove. The only thing that hasn't failed is the microwave. Never again. I recommend anyone considering their products move on. My LG repair guy told me next time stick with Whirlpool