Service Tutorial Sermoon D1 Install the BL Touch
Вставка
- Опубліковано 25 сер 2024
- Accessories purchase, Please contact our official email or website, remember to attach your machine type and accessories pictures
Official email:info@creality.com
Official website: www.creality.com
Any technical support in need, Please contact our official service email,remember to attach your printer model、complete orderscreenshot、purchase link 、printer product SN and the issue relevant video or picture .
Official service email:cs@creality.com
Any inquiry of firmware and software,Please download it by creality official website:www.creality.c...
Creality firmware obtaining tutorial: • Video
I followed your instructions and now I have a printer that sits on the loading screen.
I has the same problem. Do you fix it?
I can't find the specs of the bl touch for the sermoon d1:
Which bracket for the sensor should we buy/print? Which length must the cable have and which type of connector?
I believe many of this to be similar to other mother, at least the creality ones, but still to find the right sensor i should know these values, thanks!
Thank you very much for great sharing. I have a question which if I would like to update with CR touch on my 3D printer, do I use same software of screen and mother board?
Hi, regarding your question, please contact our official after-sales service and they will help you solve your problem as soon as possible. (Official service email: cs@creality.com)
Do you need to perform autoleveling before every printing start? Or is there a way to save settings for future use?
Hot to buy BL kit
Where is the 220-110 voltage selector? Cant find it!!! i have the CHP-350-24 power supply and cant see it.
Hi, regarding your question, please contact our official after-sales service and they will help you solve your problem as soon as possible. (Official service email: cs@creality.com)
if there is no voltage selector it means it works from 220-110
Do you know where i have to copy model .stl files? Actually i don't see anything when i insert the sd card.
you have to turn your .stl models into gcode with a slicer i recommend cura
Where can I buy it? 🤪
You can go to our official website to consult the customer service: www.creality.com/
It forgets the offset value 🥺
Hi, if you encounter any problems, please feel free to contact our after-sales service and they will help you solve the problem as soon as possible. (Official service email: cs@creality.com)
Same issue, did you ever figure it out?
No, I am just waiting if there is a firmware now. The newer lidar based levellers are better in printers like K1 Max or Bambu Labs X1 Carbon :) @@heathlawson3638
@@heathlawson3638 I have the same problem, have you found a solution?
I have the same problem, have you found a solution?