Creality Sermoon D1 - Can it Handle ABS?
Вставка
- Опубліковано 14 вер 2021
- Creality3D - bit.ly/3rt4Qbr
Sermoon D1 - bit.ly/2UCVaPu
10 % Off For Sermoon D1 - PattoD1
Creality is a great 3D printer brand and their printer performance has surprised people over and over again. Will this happens again with Creality new Sermoon D1?
And we will test to this printer prints successfully ABS parts.
Leave a comment on what u think about this printer.
________________________________________________________________
MY PATREON PAGE: / letsprintyt
Facebook: www. letsprintyoutube
Instagram: / letsprintyoutube
________________________________________________________________
Make a little tent for the top, and maybe it could be great at ABS?
Brilliant review! Did you ever experience bed level issues? A few reviewers mentioned that it tends to tilt sideways because the Z axes are not synced together with a belt..
It gets way better once you figure out all the slicer material settings are for a generic bowden tube setup, then change them for a direct drive. I hate the dual filament feed bearings always jamming, I made a part to convert the sermoon to reverse bowden and is much much better. Wish it had a way to calibrate the thermistor. Also the more you use it you will find that the z axis side without the zero switch sags from time to time. When I level the bed if the right side has too much clearance I immediately turn the z axis motor on the right side due to the sag. Badly needs a firmware update, to fix a bunch of minor annoyances. Also wish it had a lid and lights!!! But for the money its a really good printer 9.5/10.
Hi where did you buy the Z axis limit switch as mine also came broken
hello how do i calibrate stepper motors?
Great job on giving the review. I'm thinking about adding plastic like a piece from a shower liner to help keep the heat in. Do you have the file for the Empire State Building?
👏👏👏
LETS PRINT................abs. NICE 👌😂
it is a pitty that the bed is not 300x300 .
Why would you want to print in abs nowadays though? You can get other materials and even some formulations of PLA that are stronger and they are actually designed to be 3D printed unlike ABS
what does "100mm per second" means exactly ?
Would you say that this is a good printer to start with, or are there better ones to choose from for a novice?
You left out some of the other issues this printer has, namely:
I rather buy 3 x Creality ender 3 for the same price as this one, and hook them up to Octoprint.
You'll benefit by increasing your retraction and decrease your priming after each retraction.
abc
Nothing to do with the printer U don't no how to print with abs properly. Drop your nozzle hight abs like a tighter gap 20 percent fan. The only thing lacking is the hot end temp you need at least 260 to get any good quality and prints. At 250 255 abs comes out to grainy.
An expensive ender 5 with the most nonstandard hotend on a consumer printer....fools and their money.
That English is quite hard to listen to.
Friend,I really appreciate your work. We are looking for reviewers, would you like to review Longer's 3D printer & laser engraver?