E30 M10 weekend ride. 𝘓𝘖𝘞 𝘗𝘖𝘞𝘌𝘙 𝘋𝘙𝘐𝘍𝘛𝘐𝘕𝘎
Вставка
- Опубліковано 17 жов 2020
- Replacing engine mounts with PU ones and throwing some good old street drifts.
If you like this content check out our channel
/ @rushd1453
Skip to drifts: 1:10 - Авто та транспорт
I drive E30 Coupe with M50B25TU swapped stock engine 192 hp (+ hydraulic power steering from, I guess, E34), self-locking diff with 3,64 ratio (3.64S diff) in Ukraine - and it is absolutely perfect for some street drifting trainings! : D Love it! : D
Iha perkelee hyvä video 👏
Hello, nice drifts, can you tell me size of the front wheels? They look perfect! 👍
Thanks! 14” x 8” and i have E46 lower control arms also
Kova
Nice! what tyre size do you have at rear when drift? are those are carbuerators or throttles?
Kuz Nuke / Майнинг / Влог I use 185/55/14 all around. These were 40mm dellortos. Now im swapping K24A in this car take a look if interested 😁 ua-cam.com/channels/t3hOlTOY82gflX_U1_qxVA.html
@@akikalke5400 Hi sir I am from south Africa 🇿🇦and I would like to ask how did you make your m10 so powerful what pistons and camshafts did you put cause I am going to use a stock Intake...or you can give me your numbers and I will whatsapp you I that's possible
What diff and gearbox is that
Can you please tell me about the carbs please?
Does it gives more power?
I intend to instal a 2 twin Solex carb on my M42 with M3 e36 piston and custom crank shaft
Yes and no.
With just carbs you won`t get big power gains unless stock intake is poorly engineered.
You will need supporting mods like cams and compression to make power.
Twin carbs will affect positively to throttle respond without any other mods tho.
And with carbs you can make basically same top end power you make with itbs with same supporting mods.
@@akikalke5400 thanks alot for the infos bro...God bless
what coilovers are you rocking man?
Just some junk meant to be in toyota altezza but i fitted those in this. :D
did you add any wheel spacers bro?
Yes in rear i have 50mm bigboys with those oem bottlecaps. In last clip they are not installed tho.
@@akikalke5400 damn man, I like what you did with the Whip
Does this car have a limited slip differential or open diff because I have an e30 318i with open diff and was curious(I’m not going to abuse my e30)
I have welded 188 diff with 4,45 ratio. Car was making around 160-180hp from crank. There is some drive and K swap videos about this car in RUSH D channel
@@akikalke5400 wait, how did you push 160/180 from an M10
@@FOXeye95 It had 40mm sidedrafts, schrick 304 degree camsaft, schrick stiff valvesprings, 10.4 cr, 2285cc (big bore, mahle pistons and long storke crank) And fully adjustable ignition with waste spark coil. There is CHEAPER AND BETTER ways to get more power and relaiability 😂
@@akikalke5400 any recomendations? a list would be great. thanks
@@akikalke5400 im from south africa. drive a 84 e30 318i. need more power