I like the silence if he is naming parts on the screen that he is putting back on. Silence only works if the mechanic is already a pro or familiar with part names. Id like to know when using the hammer what are you looking to hit and why just looks like he was banging away. Then at the end looks like he bent someone in the middle before adding the tire lol and i dont know why makes me scared to try even though i saw it
@@NewzAndReviewz he needed to get the ball joints out of the holes, since they're tight and/or seized (joints are tapered), and the hard metal is the best place to shock it loose (instead of directly hammering the joint). also, at the end, he's 'staking' the axle nut into the indentation in the axle, as the nut is pliable there, and the staked metal blocks it from rotating and coming loose.
Time to ALWAYS honk the horn before backing up! Your kid scared the bejeezus out of me walking around the running car! Then sit the whole family down and have a strong talk about never going behind a running car, ok? Thanks, bro. 👍❤️
You make it look so easy! I am taking notes on all your video tutorials just in case I am able to tackle future similar tasks. I hate taking my car into the shop and never knowing they will take care or diagnose correctly or cheat and say they need to fix things that are not needed.
That's what a two week old car looks like in the North East. Normally, for when that type of service is required, rust is holding everything together up here. Nice zen-like video, man -Thanks!
i replaced my wheel bearings twice....mavis said they both were bad...im noticing that the difference is that im not torquing the last silver nut...is that really the reason why i keep hearing the humming noise after putting on TWO brand new ones? i bought the preassembled from amazon and the second one was from rockauto
I just swapped my sway bar with new end links and tighten ever bolt. I still hear clanks in front. Almost like I can hear it more now than before, what can it be?
Truth b told I got really nervous when ur boy was behind the car n the car was still running,other than that perfect, gonna have to take u my tundra I have left front noises sway bar or links
Hektor, I totally get all your humor in your silencio performance. Great work! Must be really nice to work on a completely rust-free car. Those rotor screws just came right out! Amazing! 👍🔧🧰
Thanks for the fart man! Excellent editing and details i like it bro really opened my eyes. That fart 💨 sounded shitty though. I wish next time when u put the parts back on you say the name of the part or flash it in text on the screen for the rookies so we know what part we are messin with just helps n makes it easier but you the shit bro
Hey hector I just have a question I have a 2018 Chevy Cruze LS and I think my fuel leaks bcuz I leave it idle and my fuel economy sensor mpg it goes down just leaving it idle but once I take off it works but I been having a P0420 sensor code but I haven’t had it for a couple days now so am not sure
@@fredsalter1915 Completely agree! Press in bearing are a royal pain if you don't have a press and all the different sized cups to do the removal and reinstall.
Do u have a shop in los angeles bc I'm having issues with my 2016 kia optima and I've seen u diagnosed one in ur videos ill appreciate it if u reply back thank u ....
Hey Hektor,ive been watching for a while & im a c-tech @ Firestone & I’m worried electric cars will end my career,can we work on those or we as mechanics done?
They still have suspension components and they will still break down. You just have to learn electrical and u will be fine.it will take a long time for gas to be phased out trust me. Probably not even in our lifetime
@@ronsimmaculatedetailing6335 yeah I’m about to be 21,the minute I have to do something to an electric car,I’m tearing it apart to learn how everything works
You got balls hitting the cv shaft on a pivot. I put a vice grip on the shaft to where it butts up against something hard so I don't mess the bearing up inside the motor. Hard to explain.
What add is at 7:53 ??? I cannot see pass that mark. On both chrome and Edge web browser. Also nice videos but i think ppl like to understand how you diagnose a problem. Just viewing you do get some of the infos. But not everything that is necessary. But good video.
Have that same rumbling noise on my 99 civic. Changed the front right bearing 6 months ago not noticing any play on the wheel. Noise and vibration goes away when making right turns
I prefer your upbeat personality over silence
I second this.
Amsr is not for you.
You've a great contagious personality and mood Homie Hektor let it shine.
Kudos ✌
I like the silence if he is naming parts on the screen that he is putting back on. Silence only works if the mechanic is already a pro or familiar with part names. Id like to know when using the hammer what are you looking to hit and why just looks like he was banging away. Then at the end looks like he bent someone in the middle before adding the tire lol and i dont know why makes me scared to try even though i saw it
@@NewzAndReviewz he needed to get the ball joints out of the holes, since they're tight and/or seized (joints are tapered), and the hard metal is the best place to shock it loose (instead of directly hammering the joint). also, at the end, he's 'staking' the axle nut into the indentation in the axle, as the nut is pliable there, and the staked metal blocks it from rotating and coming loose.
He was having a bad day that’s all.
11:45 pressure relief valve
13:44 them valves were loaded with pressure 😎💪👏😤
you mean fart?
lol
For a minute there I thought I clicked on Fix It Angel. 😝 good format.
I thought that 2 man especially with the sky view
hahahha! I thought the same
He even farted, like @fixitangel
11:45 👍
😂😂😂😂
Time to ALWAYS honk the horn before backing up! Your kid scared the bejeezus out of me walking around the running car! Then sit the whole family down and have a strong talk about never going behind a running car, ok? Thanks, bro. 👍❤️
I agree with you bro
Those rotor screw are paid actors! They never come off that easy
You make it look so easy!
I am taking notes on all your video tutorials just in case I am able to tackle future similar tasks. I hate taking my car into the shop and never knowing they will take care or diagnose correctly or cheat and say they need to fix things that are not needed.
wow - i'm from Montreal Canada and that Civic looks brand new ! One winter here and its done !
This channel is awesome. Glad that i found it.
Nice content, smooth like butter. This is where you know someone is seasoned.
4:19 I learned this from an old guy, use 2 hammers and hit the at the same time on opposite ends.
You're welcome.
That's what a two week old car looks like in the North East. Normally, for when that type of service is required, rust is holding everything together up here. Nice zen-like video, man -Thanks!
Era todo Hector, buen video
I have never seen those rotor screws come out so easily. Wow
Cool video. Keep up the great work homie...
i replaced my wheel bearings twice....mavis said they both were bad...im noticing that the difference is that im not torquing the last silver nut...is that really the reason why i keep hearing the humming noise after putting on TWO brand new ones? i bought the preassembled from amazon and the second one was from rockauto
I had new struts put on my 2011 Ford Taurus.
Still has some clunkiness to driving over rough rough.
wow all of those part underneath the car are very clean.
I just swapped my sway bar with new end links and tighten ever bolt. I still hear clanks in front. Almost like I can hear it more now than before, what can it be?
What was wrong with the strut was it also making noise or did it have a leak do struts make noise when there wearing down?
That passenger tie rod end looked a little worn, and do you not torque fasteners on steering and suspension components?
Truth b told I got really nervous when ur boy was behind the car n the car was still running,other than that perfect, gonna have to take u my tundra I have left front noises sway bar or links
Hektor, I totally get all your humor in your silencio performance. Great work! Must be really nice to work on a completely rust-free car. Those rotor screws just came right out! Amazing! 👍🔧🧰
Awesome Video
Thanks for the fart man! Excellent editing and details i like it bro really opened my eyes. That fart 💨 sounded shitty though. I wish next time when u put the parts back on you say the name of the part or flash it in text on the screen for the rookies so we know what part we are messin with just helps n makes it easier but you the shit bro
That sounded wet homie 😳
Do you know much about the power steering pump on these engines?
Always great to see the kids around, the next generation of mechanics
The big homie hect in the building
Buen video!!!
Can you please tell me what was the impact you used to take off the tire center bearing. Please let me know. 😚🙃
Milwaukee Fuel, probably 1/2in
Hey hector I just have a question I have a 2018 Chevy Cruze LS and I think my fuel leaks bcuz I leave it idle and my fuel economy sensor mpg it goes down just leaving it idle but once I take off it works but I been having a P0420 sensor code but I haven’t had it for a couple days now so am not sure
P0420 is catalytic converter code, usually is clogged, broken or have a bad 02 sensor
great video, can you show how you install the wheel bearings. thanks.
Take the hub to a shop with a press :-P
@@fredsalter1915 Completely agree! Press in bearing are a royal pain if you don't have a press and all the different sized cups to do the removal and reinstall.
Homie Hektor. Why do the struts, and why both sides?
Do u have a shop in los angeles bc I'm having issues with my 2016 kia optima and I've seen u diagnosed one in ur videos ill appreciate it if u reply back thank u ....
I work from my home garage in Pomona 👍🏼
11:45 damnnnnnnnnnn :)))))) lolllll
Where are you located at I need the same thing done to my civic can u do mine how much would u charge
Was an alignment needed after?
First, do that thumbs up. THEN watch the video! It’s Homie Hektor - we know it’s gonna be good! 👍🔧🧰
Way ahead of you
I always "thumbs up" when starting the video. Hektor never disappoints!
That's a JIS spec screwdriver, not a phillips one!
Hey Hektor,ive been watching for a while & im a c-tech @ Firestone & I’m worried electric cars will end my career,can we work on those or we as mechanics done?
They still have suspension components and they will still break down. You just have to learn electrical and u will be fine.it will take a long time for gas to be phased out trust me. Probably not even in our lifetime
@@ronsimmaculatedetailing6335 yeah I’m about to be 21,the minute I have to do something to an electric car,I’m tearing it apart to learn how everything works
You know stuff bro
You got balls hitting the cv shaft on a pivot. I put a vice grip on the shaft to where it butts up against something hard so I don't mess the bearing up inside the motor. Hard to explain.
you mean inside the *transmission*?
There is no shame in speaking. Good video Angel Homie
The fart was unexpected - 🤣😂
1:11 Hey! What you looking at?
11.45 what was that?
What add is at 7:53 ??? I cannot see pass that mark. On both chrome and Edge web browser. Also nice videos but i think ppl like to understand how you diagnose a problem. Just viewing you do get some of the infos. But not everything that is necessary. But good video.
Yo it was all silence until 11:44 lmfao 🤣 (loud as fart)
Dang never knew an impact driver can take much use.
chingao...😂😂😂...🚶🏾♂️💨
No wonder the struts were bad, they keep putting the same Chinese quick struts
How many miles on that Honda. Comes apart like brand new. Minnesota make a mess of cars.
Supper
Easy money 😉
Firestone screwed the pooch when they let you go.... great job.
lol that fart though!
👍
Nice one! You got a 9 to 5 yet
Lol.. So he can be robbed in the form of taxes and make less money.. Hmm.
Hahahahaha
Hector don't play with them honda engines.
Cute baby
GREAT VIDEO....BUTT I THINK YOU SHOULD CHECK YOUR SHORTS FOR SOME MUDD LMFAO
Easy squeezee lemon peezee!
lmfao 11:45 and 13:43
Wheel bearing are a pain in the butt.
buy the bearing kit with 1/2 Milwaukee electric tool take off easy man
Dude your ads are longer than your video 🤦🏻♂️
Bruhhhh say something. Silence
I think you spoke a lil too much in this video 🤨
Have that same rumbling noise on my 99 civic. Changed the front right bearing 6 months ago not noticing any play on the wheel. Noise and vibration goes away when making right turns
Honda couldn't have come up with a more useless design. 2 pieces of plastic with grease in the middle as a bearing that supports the whole car. WTF?
11:05 Control arm bushing looks like it has had better days. just saying ok bye.
Firestone screwed the pooch when they let you go.... great job.