I just watched this video. This is a nice safe with some good features. But I immediately was concerned that there are no dead bolts on the hinge side of the door. If you look at the 4:40 point in the video, you can see the rear of the hinges. Note that the hinge next to the door edge seems to be only about two inches of about 12 gauge sheet. Seems to me a few minutes with a sawzall with make short work of that and the door comes right off.
There is a 1 inch solid steel ridge on the backside of the door that runs the length of the body and secures into a channel. Thus, you can cut off the hinges and the safe stays locked. I show it in detail here in this video. ua-cam.com/video/9u-asS7Ldys/v-deo.html
See our video, Can all Locks be Bypassed: ua-cam.com/video/8E0VRBeNdpk/v-deo.html All safes can also be bypassed with the right tools, knowledge, and time. Even bank vaults can be drilled. Just takes a great deal of knowledge and practice. We're not saying this safe is impenetrable, just a good safe at its price point. But if LPL is ready to attack one, he knows where to buy it. 😁
I’ve got a better idea would you please send one of these safes to me I won’t lock pick it but I will bolt it down to the floor and use it and I’d be really thankful to have it👍
What I look for in a strong safe, I look at where the safes bolts protrude from. That area where the bolts come from must be beefed up with steel at least 1/4 thick steel. I've seen safe doors that house the bolts are protruding from sheet metal thick steel, I mean how flimsy and unprotected is that. flimsy, and cheap bolt housings are susceptible to easy go at it type prying. This Hollon safe looks like a great safe, because it seems to fulfill the requirements I like to see in a dafe.
Any opinion on the Chub or Tann burg safes? I remember the vault that was installed in a bank building in Downtown Columbus Ohio in the late 70's. 3.5 foot walls reinforced with all types of expanded metals, hardened rebar, steel conduits for alarm wiring in the walls. All of which was poured with concrete mixed with carbide pieces. Fast forward to 2004, watched the demolition of a 10 year old bank branch, it took them 2.5 weeks to demolish the vault, wish I had bought the door assembly when it was removed.
I'm sorry. I'm not familiar with those brands. That bank vault sounds amazing. In many modern TL-15 and TL-30 safes (the next step up from this safe) you'll find concrete-composite filled exterior walls . www.acmelocksmith.com/buy-safes-online/shop-safes-by-type/high-security-safes.html
I am strongly considering this exact model. 354 lbs is still a lot to move, especially to the 2nd story of a house, can the door be removed to make transport lighter? Is it true almost half the weight of a safe is in the door? Thanks for the video and the help!
I am considering buying a Hollon HS-310 series safe. Is this a good home safe($300 or less is all I can afford at the moment) and would you reccomend the combo lock or the digital lock?
It's a home safe that is primarily meant to protect paperwork and small valued items. It is a great safe for that price point, but not something you want to put a lot of money or valuables in. Take a look at or video Where to Hide Small Safes. ua-cam.com/video/uEv7u0WFHww/v-deo.html You can buy the HS-310 off of our website here. We only sell the digital lock version. At this price point it just makes sense to have something that's easy to get into. www.acmelocksmith.com/buy-safes-online/hollon-home-safe-hs-310e.html
The door seems very weak to me. When I worked in a bank the safe doors had locking bolts on either side of the door. On this safe all you need do is take an angle grinder to the hinge then jemmy the door out of its frame.
No. There is a 1" steel ridge on the entire hinge side of the door that locks into place when the door is closed. Thus, the door is held by bolts and this 1" steel ridge on all four sides and can't be removed if the hinges are cut.
For someone experienced at moving safes, it's not that hard to move. I watched safe movers deliver a 4,300 lb safe and they didn't even work up a sweat. On a level concrete surface free of bumps, one man alone can move it. I assume they could move it back out just as easily. It does take a pro though.
Nah one you can't see you can feel but one that isn't accessible is safer. Throw a safe into the Mariana trench and no one will get your stuff. Of course it is safe but not what the industry considers secure which they call "CIA" confidentiality, integrity, accessibility in which case the safe in the Mariana trench is safe and if your stuff doesn't mind water or pressure its still integral but it's not accessible.
I am wondering that also I have been looking at the AM SEC BF 1512 it has a half inch thick steel plate door and an inner and outer 1/8 inch steel sides with some sort of specialty cement in bedded with some sort of special steel pellets in between the two walls I would like to get a TL 15 or a TL 30 safe however I’m scared it would fall through my floor as they are so very heavy
It's no longer made. We have one left. It's quarter inch steel, burglary rated, drop box. PM me on Facebook, and I will get you the dimensions and a price on Monday. Jonathan! Congratulations. You are the winner of the Schlage Smart Lock used in the video. Please message me on Facebook with your address. facebook.com/AcmeLocksmith/
I don't need burglary protection, so I'm looking at just their home line such as the HS-360D. Do you recommend that line as well? I noticed that you only stock the electronic versions. Will you be getting the dial version?
For fire protection and keeping general people out, the Hollon HS line would be fine. We can certainly get the dial versions, but we hardly ever sell them so we don't list them. What I don't like about them is it requires both the key and the combination to be used in order to open the safe. They are the same price as the electronic versions.
It is! It's a decent safe. Not high security. But it will hold a cash drawer for a resister. So for keeping a cash drawer locked up, it's a good way to go.
It's interesting how much interest that small generates. It seems to be a hot item! that particular one is no longer made but the new version of it is on our website here. acme-safes-for-sale.com/small-cash-box-drop-safe-hd-03c.html 1/2 inch steel door. Great little drop safe.
It all depends on what you're putting in it. Take a look at our Video "How to Choose the Best Safe" ua-cam.com/video/1X85oZ38NOw/v-deo.html And then our Article on "Which Safe is Best for Your Needs" www.acmelocksmith.com/buy-safes-online/find-the-right-safe
Does the door have Single or double wall steel and is the door as thick as the rest of the body or thicker? Will you be carrying the BFS burglary fire safes from American security?
The BFS by AMSEC is a RSC-rated safe. See our video on Safe Burglary Ratings Explained ( ua-cam.com/video/9u-asS7Ldys/v-deo.html ). RSC safes are the next class up from this safe. More expensive, but more secure and UL tested. We sell them and offer them for drop shipping at no cost, but don't have them on our website. For a quote on a BFS, check out our website at: www.acmelocksmith.com/buy-safes-online/custom-safe-quote
Whether or not it's good for you depends on what you're going to put in it. If the content is going over 20/25K, the you may want to look at TL-15 / TL-30s.
I have a question about tge safe? I currently have a safe from Costco and its a fire rated safe however after outting documents and valuables inside it gets very moist cnd has a bad smell. Whst am i doing wrong?
Yes, a small amount of play in the 360 is normal. But it should be minor. If it feels too loose, shoot a video of it and send it to Hollon support team, they'll let you know if you're within the normal range.
@@LocksmithRecommended Yes, tried magnets and that didn’t seem to work. Tried rocking and bouncing it and finally it opened. The weird thing is that it hasn’t acted up since then. I don’t really trust it much now, but am using it until I can afford to buy a real safe. If it fails again, I will just open it a la The Locking Picking Lawyer’s technique.
@@matthewtalbot-paine7977 The code is stored on a chip inside of the safe and will remain in memory when the batteries are swapped. The by the way is what also allows you to swap out the face plate and maintain your code should any of the faceplate electronics fail. You won't need to drill the safe (when a dial fails, you always have to drill).
I like the glass re-locker. I favor a dial combination with a key to operate the bolts. No fixed deadbolts on the hinged side is a weak point. Also exposed hinges are a bad idea.
There's a fixed hinge that runs along the entire width of the right hand side of the door. It's about 1 in wide, you cut the hinges on the exterior off and the door will still not open.
@@LocksmithRecommended Thank you for getting back to me on this topic. What's your opinion on plastic internals for the combination so it's hard to x-ray?
If you just want fire protection or to keep your kids/cleaner/house sitter out, that safe will be fine for you. If you are putting valuables in it, get something more secure. Check out our video Choosing the Right Safe. ua-cam.com/video/MeEa-6C5zoA/v-deo.html
This does not have a solid steel front, opting for the glass relocker instead. Move into a UL-rated RSC, TL-15 or TL-30 for solid steel doors. Check out our video on Safe Burglary Ratings Explained. ua-cam.com/video/9u-asS7Ldys/v-deo.html
Most come with default digital, but we can order them with the old dials. Just select that configuration. www.acmelocksmith.com/buy-safes-online/shop-safes-by-type/burglary-fire-rated-safes.html?manufacturer=5431 For comparison of dial vs electronic locks, check out our article: www.acmelocksmith.com/blog/replace-safe-dial-with-an-electronic-lock-for-easier-access/
There's a 1" wide strip of steal that fits into a groove along the entire length of the right side of the door. I should have drawn attention to it. So no, it can't be opened even if the hinges are cut.
It's subjective because it really depends on the value of the content and your budget. The absolute best safes you can buy are TL-30 rated safes X 6 (TL30X6). They carry a TL-30 rating on every side of the safe. We have an article explaining safe ratings: www.acmelocksmith.com/blog/safe-burglary-ratings-explained/ and a video talking about what to look for when buying a safe: ua-cam.com/video/1X85oZ38NOw/v-deo.html
I wouldn't bolt into a post-tension slab. It can be done, it's just very dangerous. Whether or not we could get you a safe in a week would depend on what safe you ordered and where you were located.
I haven't looked through the rest of the comments - but since this is an electronic lock can the combination be changed as or when needed or is it fixed at the time of installation?
Yes. With electronic safe locks you can change them at will. Just be sure to do it with the door open and test before closing. 👍 We can also get this safe with a dial or a combination dial/electronic lock (you can use either or).
It's one they don't make any more. It's a burglary-rated drop safe with a 1/2 thick door and 1/4 inch solid steel body. If you're local (Phoenix), it's a great buy, but if not, shipping it would be very expensive.
No. There is a 1 inch steel ridge on the backside of the door that secures into a channel within the body of the safe. Thus, you can cut off the hinges and the safe stays locked. I show it in detail (because people kept asking in this video) here in this video. ua-cam.com/video/9u-asS7Ldys/v-deo.html
Dial combination vs electronic. We offer them both, but the electronic is what we mainly sell. You can see them on our website here. acme-safes-for-sale.com/burglary-fire-rated-safes.html?manufacturer=5431 And here's our article on dial locks vs electronic locks. www.acmelocksmith.com/articles/safe-dial-vs-electronic-lock/
@@Logan0o Great question! There are water resistant safes, but wee don't sell them, because they are built so cheaply. There are ways to get both theft and water protection. www.acmelocksmith.com/articles/are-safes-waterproof/
LOL. You're not the first to ask about that safe! No longer made but Hollon has one that is very similar. It is backordered until August though. www.acmelocksmith.com/buy-safes-online/small-cash-box-drop-safe-hd-03c.html
@@Andagio. The one that's above the safe and the video? No it's not fireproof. Little drop saves are meant to temporarily hold cash. Until the cash is either moved to the bank or into a more protective fire/burglary safe.
@@LocksmithRecommended Thank you! But one last question. Do you have a recommendations for one that’s similar to that size, fire proof, and can be bolted down?
@@Andagio. None of the vendors I am aware of carry a fireproof small drop safe because they are meant to hold cash temporarily just until it can be placed in a fire safe.
@@kelalamusic9258 Be sure to check out some of her other videos. We have videos on safe fire ratings. What the burglary ratings mean. And what the main things are that you should look for when buying a safe.
@@LocksmithRecommended Two questions would you feel confident the average homeowner using the BF 1512 bolted down to the floor and also is the BF 1512 available in an RSC2 version??? Also does your company offer the fingerprint lock or the combination/fingerprint lock for the BF 1512 and how much would it add to the price???
@@william38022 You'd want to bolt it into concrete. We couldn't drop ship one with the fingerprint lock on it because AMSEC does not have a biometric lock. They do not make an rsc2 version. The Next level up would be a Tl-15.
@@LocksmithRecommended I noticed there are different size BF safes some slightly larger than the BF 1512 if I bought one of those larger ones I could weld a 4 sided 1/2” steel box with no front door (because the BF has the 1/2”plate door it would protect the front) and place it in the bottom of the safe and have a bolt go through the bolt down hole 🕳 through the homemade job and through the hole inside the safe itself to secure that homemade box to the bottom of the safe itself and then the bolt would extend through the box and the safe and go down into the concrete if someone did cut the safe open from the side or top they would stillhave to get through the half inch steel plate I could even place a small burg watcher money box inside the homemade job
I don't know much about Steelwater. Fort Knox makes a great safe. Spendy but good. Here I'm looking at safes at specific price points. And you would be hard-pressed to beat Hollon at their price point.
@@LocksmithRecommended thank you. Steelwater is a South Carolina based outfit, I like what I saw regarding their safes, the seem to have similar to the Hollon safes in regards to standards.
The magnet trick was discovered on Sentry safes using cheap casings and tiny solenoids. Thus the magnet has enough strength to pull the solenoid to release the lock. You have this issue with almost all of the big box store safes. That's why you see videos on the technique always being used on cheap, budget safes from big box stores. Good safes (like this one) use UL-rated locks (S&G, SecuRam, etc...) where the release is motorized. UL-rated locks converted to motorized releases about 10 years ago or so. Because there is a mechanical linkage, rare earth magnets cannot open the safe. The mechanical linkage holds the release in place so it can't be opened this way.
@@LocksmithRecommended Thank you for that great explanation. Totally makes sense. Whenever I see electronic locks I wonder about magnet vulnerabilities and such.
Most electronic locks now have the battery inserted from the outside of the safe. Those that don't typically have a key override or a jumper that will put enough juice into the lock to get it open.
B/C rated safes don't really exist any more. A burglary-rated safe without a UL burglary designation (RSC or TL Rating) is a safe that the manufactures builds to withstand a burglary. Basically, it's a much tougher safe than a typical home rated fire safe. UL ratings cost a ton and at this price point, won't be found. You really have to look at what the manufacture is doing to that safe to prevent a burglary to determine the quality of it. How thick is the steel, the bolts, is there a drop rating (this one is 30') is there a shock relocker, a glass relocker etc...This is one of those safes. Check out our video: ua-cam.com/video/1X85oZ38NOw/v-deo.html to see the features you want to be looking at to make a secure safe. We also carry UL rated safes on our website at www.acmelocksmith.com/buy-safes-online/shop-safes-by-type/high-security-safes.html
There's a 1-in wide strip of metal that fits into a 1-in wide recessed groove. So the entire hinge side acts as a single giant bolt. You cannot cut the hinges and remove the door.
@@LocksmithRecommended i just want something large enough that someone cant just walk off with it and that can protect against a thief for less than $600 i know alot of safes are more for show or just fire at that price point :(
@@aaronsanchezz At the price point, the HS-500 is a good safe, but at that price point, there aren't a lot of security features but it does avoid the pitfalls of other brands. I'd recommend bolting it down once you have it. acme-safes-for-sale.com/hollon-home-safe-hs-500e.html
What you will want depends on what you are putting into it. Several things to consider. See: Article How to Choose a Safe: www.acmelocksmith.com/buy-safes-online/find-the-right-safe/ Our budget home safes are here: www.acmelocksmith.com/buy-safes-online/shop-safes-by-type/home-fire-safes-discount.html
When you talk about the bolts you are showing an external view of the bolt. Isn't the important part of the bolt the part that is on the inside of the door? You don't show it but from some accidental views it looks like there is almost zero bolt length inside the door and because of that it isn't possible to give two separated support points for the interior part of the bolt. Basic physics tells me that is not good.
There's a 1" wide strip of steal that fits into a groove along the entire length of the right side of the door. So no, it can't be opened even if the hinges are cut.
You are correct, the bolts are simply bolted to the angle iron bolt work and are only supported in one place by the angle iron they pass through. That's not a great design and high end safes support the bolts in at least two places but for a small B rate safe with a plate door, going into a plate door jamb, as long as they are long enough it's more than sufficient. Although you're right that it's a crappy, corner cutting, cost saving way to do thing's. Sadly this seems to be Hollons major weak point in all of their low end safes.
I do not see a option to bolt down what good is a safe you can't bolt it down it doesn't matter how much it weighs if its not bolted down it can be moved
Nothing. The door stays locked in place by the bolts on the swing side and by a 1" wide steel channel that runs the entire length of the door on the hinge side. I highlight that feature here: ua-cam.com/video/9u-asS7Ldys/v-deo.html
I’m in the market for a safe for my precious medals. I need a decent size for an affordable price. All these home safes looks like they can just be ripped open.
Home safes, like those at the big box stores, are not meant to protect valuables. Have you seen our video on Burglary Ratings Explained and Which Safe is Right for You? The issue is, you say for an "affordable price". Good safes are not cheap safes. Cheap safes are made cheaply. Several years back I had a person tell me they were putting $100,000 of content in a safe but they didn't want to spend more than $300. ??? Makes no sense. Burglary Ratings Explained: ua-cam.com/video/9u-asS7Ldys/v-deo.html Which Safe is Right for You? ua-cam.com/video/MeEa-6C5zoA/v-deo.html
@@matthewtalbot-paine7977 Are you referring to the glass relocker? If someone tries to break into the safe using force, it will break the glass and throw the relocker to lock the safe down.
I was thinking the same thing also I want a TL 15 or a TL 30 however 700 pounds would go through our floors there’s just no way you have to get underneath your house and have concrete pillars installed
As a mechanical engineer I really have to laught how cheap these 'safes' are build. It's all air and hefty looks. I guess I have to build my own safe..
Cheap safes are built cheaply. Buy a real TL rated safe, not a bottom tier B rate safe like this. You'll pay for it but it won't be lightly or poorly constructed.
@@LocksmithRecommended Absolutely, even a B rate, smartly installed, is more protection than most need. I believe most insurance companies go up to 20k in a B rate. They are significantly tougher than most imagine.
I care more about an attack through the side. An angle grinder will go through thin, unhardened metal in about 5 minutes. What has your safe done to protect against that.
You definitely need to check out our video on Burglary Ratings Explained. This is not a high security safe (TL X 6), just a great safe at this price point.
You can't see it clearly in the video but there is an entire metal channel that runs along that side of the door. When the door is closed, the channel locks into a track in the safe, so the door cannot be opened if the hinges are cut. Larger versions of the safe also have both a top and bottom bolt. There use to be fixed bolts on that side, and they've recently switched to an entire channel.
You're not alone. But the electronic locks of old are not the same as new. Just stay away from the cheap safe manufactures, and we find the electronic locks to be every bit as secure as a dial.
@@LocksmithRecommended ok but you need to change batteries, right? lets say you forget how do you open the safe then, you have top open it to change the batteries right? thank you for your reply
@@bingochoice LOL. Yea, in the beginning safe manufactures were putting batteries INSIDE the safe. 🤦♂️ It didn't take long for them to learn this was idiotic. The new electronic locks by decent safe manufactures have the batteries on the outside. The only ones still putting them on the inside are the very inexpensive safes that come with key overrides - just in case. I'm not a fan of those either. But the coolest new locks are BOTH electronic and dial. Should anything happen to the electronics that would be prevent access, you just dial the safe old-school-style. Like this one by Securam. www.acmelocksmith.com/buy-safes-online/securam-safelogic-xtreme.html Thanks for the contribution to the channel by commenting. 👍
I heard the Darren Bailey add pushed on me prior to viewing this vid and I’ll be voting for him 👍
Great video.
Thanks for sharing.
New subscriber here from Philadelphia PA USA
Thanks for the sub!
I just watched this video. This is a nice safe with some good features. But I immediately was concerned that there are no dead bolts on the hinge side of the door. If you look at the 4:40 point in the video, you can see the rear of the hinges. Note that the hinge next to the door edge seems to be only about two inches of about 12 gauge sheet. Seems to me a few minutes with a sawzall with make short work of that and the door comes right off.
There is a 1 inch solid steel ridge on the backside of the door that runs the length of the body and secures into a channel. Thus, you can cut off the hinges and the safe stays locked. I show it in detail here in this video. ua-cam.com/video/9u-asS7Ldys/v-deo.html
would you please send one of these to THE LOCK PICKING LAWYER so he can give it a full review? thanks
See our video, Can all Locks be Bypassed: ua-cam.com/video/8E0VRBeNdpk/v-deo.html All safes can also be bypassed with the right tools, knowledge, and time. Even bank vaults can be drilled. Just takes a great deal of knowledge and practice. We're not saying this safe is impenetrable, just a good safe at its price point.
But if LPL is ready to attack one, he knows where to buy it. 😁
@@LocksmithRecommended can I borrow one?
@@sgt.hollowpoint6968 😅
@@Rick_SF “would you” is a suggestion, “can you” is a question. A non-rhetorical question was never actually asked..
I’ve got a better idea would you please send one of these safes to me I won’t lock pick it but I will bolt it down to the floor and use it and I’d be really thankful to have it👍
What I look for in a strong safe, I look at where the safes bolts protrude from. That area where the bolts come from must be beefed up with steel at least 1/4 thick steel. I've seen safe doors that house the bolts are protruding from sheet metal thick steel, I mean how flimsy and unprotected is that. flimsy, and cheap bolt housings are susceptible to easy go at it type prying. This Hollon safe looks like a great safe, because it seems to fulfill the requirements I like to see in a dafe.
after the Liberty Safe debacle recently, I'll bet more folks opt for the dial combo lock!
Any opinion on the Chub or Tann burg safes?
I remember the vault that was installed in a bank building in Downtown Columbus Ohio in the late 70's. 3.5 foot walls reinforced with all types of expanded metals, hardened rebar, steel conduits for alarm wiring in the walls. All of which was poured with concrete mixed with carbide pieces. Fast forward to 2004, watched the demolition of a 10 year old bank branch, it took them 2.5 weeks to demolish the vault, wish I had bought the door assembly when it was removed.
I'm sorry. I'm not familiar with those brands. That bank vault sounds amazing. In many modern TL-15 and TL-30 safes (the next step up from this safe) you'll find concrete-composite filled exterior walls . www.acmelocksmith.com/buy-safes-online/shop-safes-by-type/high-security-safes.html
how thick is the metal on the sides and back? website dosnt say
I am strongly considering this exact model. 354 lbs is still a lot to move, especially to the 2nd story of a house, can the door be removed to make transport lighter? Is it true almost half the weight of a safe is in the door? Thanks for the video and the help!
I think it’s 40% of the safes weight is in in door, bit of a late reply though 😂😂
I am considering buying a Hollon HS-310 series safe. Is this a good home safe($300 or less is all I can afford at the moment) and would you reccomend the combo lock or the digital lock?
It's a home safe that is primarily meant to protect paperwork and small valued items. It is a great safe for that price point, but not something you want to put a lot of money or valuables in.
Take a look at or video Where to Hide Small Safes. ua-cam.com/video/uEv7u0WFHww/v-deo.html
You can buy the HS-310 off of our website here. We only sell the digital lock version. At this price point it just makes sense to have something that's easy to get into.
www.acmelocksmith.com/buy-safes-online/hollon-home-safe-hs-310e.html
I know what safe I’m getting for my shop when it opens in a few years and the big safe will be hid in my new house hid one for shop and one for house
Thanks
Welcome.
Once you’ve pulled the safety pin after instal, can it be redone to be moved again
Yes. You would just put another cotter pin back in.
The door seems very weak to me. When I worked in a bank the safe doors had locking bolts on either side of the door. On this safe all you need do is take an angle grinder to the hinge then jemmy the door out of its frame.
No. There is a 1" steel ridge on the entire hinge side of the door that locks into place when the door is closed. Thus, the door is held by bolts and this 1" steel ridge on all four sides and can't be removed if the hinges are cut.
I have a Diebold safe from the 1870’s. It’s impossible to move at over 3000 lbs. are they relatively easy tp break into?
Depends on which one, but the old Diebolds I've seen are fortresses.
For someone experienced at moving safes, it's not that hard to move. I watched safe movers deliver a 4,300 lb safe and they didn't even work up a sweat. On a level concrete surface free of bumps, one man alone can move it. I assume they could move it back out just as easily. It does take a pro though.
The safest safe is the one you can't see.
Nah one you can't see you can feel but one that isn't accessible is safer. Throw a safe into the Mariana trench and no one will get your stuff. Of course it is safe but not what the industry considers secure which they call "CIA" confidentiality, integrity, accessibility in which case the safe in the Mariana trench is safe and if your stuff doesn't mind water or pressure its still integral but it's not accessible.
What gauge steel on the door and body?
I like that safe, I dont like the electronic lock. Is it available with spin dial lock and can combo be customized?
Yes it is.
I see 1/4 inch thick door but what's the gauge on the body?
I am wondering that also I have been looking at the AM SEC BF 1512 it has a half inch thick steel plate door and an inner and outer 1/8 inch steel sides with some sort of specialty cement in bedded with some sort of special steel pellets in between the two walls I would like to get a TL 15 or a TL 30 safe however I’m scared it would fall through my floor as they are so very heavy
Is it safe from the giant magnet test?
Approximately, what is the heaviest safe an average floor in a house can support without reinforcement of the floor under the safe?
You must be some place with a crawl space? We don't see those here. It's pretty much all cement slab. So I really can't say.
Friend, where can I find that small baron safe in the video? Do you have in stock?
It's no longer made. We have one left. It's quarter inch steel, burglary rated, drop box.
PM me on Facebook, and I will get you the dimensions and a price on Monday.
Jonathan! Congratulations. You are the winner of the Schlage Smart Lock used in the video. Please message me on Facebook with your address.
facebook.com/AcmeLocksmith/
I don't need burglary protection, so I'm looking at just their home line such as the HS-360D. Do you recommend that line as well? I noticed that you only stock the electronic versions. Will you be getting the dial version?
For fire protection and keeping general people out, the Hollon HS line would be fine.
We can certainly get the dial versions, but we hardly ever sell them so we don't list them. What I don't like about them is it requires both the key and the combination to be used in order to open the safe. They are the same price as the electronic versions.
@@LocksmithRecommended I have the HS-360D for a few years now i have it bolted down to cement floor.I have keys and a dial
Is that an AM series Amsec safe to the right? What do you think of that safe?
It is! It's a decent safe. Not high security. But it will hold a cash drawer for a resister. So for keeping a cash drawer locked up, it's a good way to go.
Does the one size smaller safe with a dial combination, also have the glass relocker?
It does not.
Hello, Do you have any knowledge of Falcon Treasury TS2 Safe or CMI Premier Safe PRB? Which would be better?
I do not. But in general, this video has some input on what to look for in a good safe. ua-cam.com/video/1X85oZ38NOw/v-deo.html
what was the model of the small safe above the one you reviewed?
It's interesting how much interest that small generates. It seems to be a hot item! that particular one is no longer made but the new version of it is on our website here.
acme-safes-for-sale.com/small-cash-box-drop-safe-hd-03c.html
1/2 inch steel door. Great little drop safe.
do you make them in custom size? the ones on the site are abit too large for my needs :/
Sorry. No.
I need a protective safe to hide really valuable and expensive stuff,what’s your recommendation ?
It all depends on what you're putting in it. Take a look at our Video "How to Choose the Best Safe" ua-cam.com/video/1X85oZ38NOw/v-deo.html
And then our Article on "Which Safe is Best for Your Needs"
www.acmelocksmith.com/buy-safes-online/find-the-right-safe
I recommend stop selling dope and learn a trade.
Does the door have Single or double wall steel and is the door as thick as the rest of the body or thicker? Will you be carrying the BFS burglary fire safes from American security?
The BFS by AMSEC is a RSC-rated safe. See our video on Safe Burglary Ratings Explained ( ua-cam.com/video/9u-asS7Ldys/v-deo.html ). RSC safes are the next class up from this safe. More expensive, but more secure and UL tested. We sell them and offer them for drop shipping at no cost, but don't have them on our website. For a quote on a BFS, check out our website at: www.acmelocksmith.com/buy-safes-online/custom-safe-quote
@@LocksmithRecommended Would you recommend a BFS home safe for home use I’ve looked at their middle size one
Whether or not it's good for you depends on what you're going to put in it. If the content is going over 20/25K, the you may want to look at TL-15 / TL-30s.
I have a question about tge safe? I currently have a safe from Costco and its a fire rated safe however after outting documents and valuables inside it gets very moist cnd has a bad smell. Whst am i doing wrong?
Get a dehumidifier
Do you also ship these safes to europe or only the United States?
We ship US only. Sorry.
I bought a Hollon 360E. Is it normal for there to be a little play when pushing/pulling on the locked door?
Yes, a small amount of play in the 360 is normal. But it should be minor. If it feels too loose, shoot a video of it and send it to Hollon support team, they'll let you know if you're within the normal range.
@@LocksmithRecommended - thanks; I did and they assured me it’s normal (only about a mm)
So what's the burglary rating??
If the electronic lock fails, is there a way to open the safe with a key? I have a sentry safe that had a solenoid failure and no means to open it.
Depends how it failed. It's a sentry, have you tried the magnet or bouncing it?
www.acmelocksmith.com/articles/how-to-open-a-safe-without-a-key/
@@LocksmithRecommended Yes, tried magnets and that didn’t seem to work. Tried rocking and bouncing it and finally it opened. The weird thing is that it hasn’t acted up since then. I don’t really trust it much now, but am using it until I can afford to buy a real safe. If it fails again, I will just open it a la The Locking Picking Lawyer’s technique.
If the key pad is digital does it have a battery and how often do you replace the battery. if the batteries die can you get locked out of your safe.
Great question. The batteries are located under the keypad on the exterior of the safe.
@@LocksmithRecommended So there is no backup lock? When the batteries run out or are removed will it remember the combination or reset?
@@matthewtalbot-paine7977 The code is stored on a chip inside of the safe and will remain in memory when the batteries are swapped. The by the way is what also allows you to swap out the face plate and maintain your code should any of the faceplate electronics fail. You won't need to drill the safe (when a dial fails, you always have to drill).
I like the glass re-locker. I favor a dial combination with a key to operate the bolts. No fixed deadbolts on the hinged side is a weak point. Also exposed hinges are a bad idea.
There's a fixed hinge that runs along the entire width of the right hand side of the door. It's about 1 in wide, you cut the hinges on the exterior off and the door will still not open.
@@LocksmithRecommended Thank you for getting back to me on this topic. What's your opinion on plastic internals for the combination so it's hard to x-ray?
Glad to see Tom Arnold got into shape.
🤣 🤦♂️
I don’t see it
Hi there I have question please
What do you thing about this safe
2605 Premium 8 Hour Waterproof 2 Hour UL Fire Security Safe, .9 Cu. Ft. NEW
???
If you just want fire protection or to keep your kids/cleaner/house sitter out, that safe will be fine for you. If you are putting valuables in it, get something more secure. Check out our video Choosing the Right Safe.
ua-cam.com/video/MeEa-6C5zoA/v-deo.html
how much solid steel plate at front?
This does not have a solid steel front, opting for the glass relocker instead. Move into a UL-rated RSC, TL-15 or TL-30 for solid steel doors. Check out our video on Safe Burglary Ratings Explained. ua-cam.com/video/9u-asS7Ldys/v-deo.html
Do you have any with a mechanical dial lock?
Most come with default digital, but we can order them with the old dials. Just select that configuration.
www.acmelocksmith.com/buy-safes-online/shop-safes-by-type/burglary-fire-rated-safes.html?manufacturer=5431
For comparison of dial vs electronic locks, check out our article:
www.acmelocksmith.com/blog/replace-safe-dial-with-an-electronic-lock-for-easier-access/
No bolts or lugs on the hinge side of the door?
There's a 1" wide strip of steal that fits into a groove along the entire length of the right side of the door. I should have drawn attention to it. So no, it can't be opened even if the hinges are cut.
do you ship outside of us? To Holland for instance?
Sorry, we do not.
Hey there, what model is this safe? The 685 or 845?
This is the 685.
What is the best safe to get against theft
It's subjective because it really depends on the value of the content and your budget. The absolute best safes you can buy are TL-30 rated safes X 6 (TL30X6). They carry a TL-30 rating on every side of the safe.
We have an article explaining safe ratings: www.acmelocksmith.com/blog/safe-burglary-ratings-explained/
and a video talking about what to look for when buying a safe: ua-cam.com/video/1X85oZ38NOw/v-deo.html
GRANDMA WITH A SHOTGUN GUARDING IT!!!
@@DUMB_AND_DUMBERER who takes night shift?
@@BY-bj6ic GRANDPA...LOL
Seemed like you were about to discuss the metal thicknesses of the safe, then that part got cut out.
I want to know if this safe can be bolts down to concrete?
Yes. 1 bolt, dead center.
Why do all the TL rated safes have the hinges on the outside? Wouldn't that make them easier to cut off?
You can spend the time to cut them off, but you still can't get in because of the four sided bolt work. So it doesn't matter.
Hinges are not a security feature, they simply allow you to open the door without it falling off.
Can I bolt it to any floor ? How much...I need somthing just like this within a week is that possible?
I wouldn't bolt into a post-tension slab. It can be done, it's just very dangerous. Whether or not we could get you a safe in a week would depend on what safe you ordered and where you were located.
Safes are bolted to post tension slabs all the time. There are precautions to take, such as X-ray of the concrete where the safe is going to go.
Post tension slabs, when cut into; the cables can rupture and spring out and kill you! That's why it is dangerous. Don't do it.
This is a good sales pitch
Good safes safes sell themselves.
ACME Locksmith very true
I haven't looked through the rest of the comments - but since this is an electronic lock can the combination be changed as or when needed or is it fixed at the time of installation?
Yes. With electronic safe locks you can change them at will. Just be sure to do it with the door open and test before closing. 👍 We can also get this safe with a dial or a combination dial/electronic lock (you can use either or).
What’s the name and model of the small safe on top ?
It's one they don't make any more. It's a burglary-rated drop safe with a 1/2 thick door and 1/4 inch solid steel body. If you're local (Phoenix), it's a great buy, but if not, shipping it would be very expensive.
Looks like the door pins could be cut and taken out and the door would just come off?
No. There is a 1 inch steel ridge on the backside of the door that secures into a channel within the body of the safe. Thus, you can cut off the hinges and the safe stays locked. I show it in detail (because people kept asking in this video) here in this video. ua-cam.com/video/9u-asS7Ldys/v-deo.html
What’s the difference between their C and E versions of a safe ?
Dial combination vs electronic. We offer them both, but the electronic is what we mainly sell. You can see them on our website here.
acme-safes-for-sale.com/burglary-fire-rated-safes.html?manufacturer=5431
And here's our article on dial locks vs electronic locks.
www.acmelocksmith.com/articles/safe-dial-vs-electronic-lock/
@@LocksmithRecommended ahhhh makes sense lol thanks man
@@LocksmithRecommended are any of y’all’s safes water proof ? Incase of a flood ?
@@Logan0o Great question! There are water resistant safes, but wee don't sell them, because they are built so cheaply. There are ways to get both theft and water protection. www.acmelocksmith.com/articles/are-safes-waterproof/
How would you secure this safe so several strong guys with tools would not steal the entire safe?
It has a bolt down hole. 👍
I'm interested in that safe above the one you're talking about, where would i find more information on it?
LOL. You're not the first to ask about that safe! No longer made but Hollon has one that is very similar. It is backordered until August though. www.acmelocksmith.com/buy-safes-online/small-cash-box-drop-safe-hd-03c.html
@@LocksmithRecommended is it fire proof? I've been looking everywhere with no answer, so I'm going to take it as a no until told otherwise.
@@Andagio. The one that's above the safe and the video? No it's not fireproof. Little drop saves are meant to temporarily hold cash. Until the cash is either moved to the bank or into a more protective fire/burglary safe.
@@LocksmithRecommended Thank you! But one last question. Do you have a recommendations for one that’s similar to that size, fire proof, and can be bolted down?
@@Andagio. None of the vendors I am aware of carry a fireproof small drop safe because they are meant to hold cash temporarily just until it can be placed in a fire safe.
You never mentioned one thing about those hinges. A decent grinder will have them off in short time. So what good is that fancy locking mechanism?
So sorry. Cutting the hinge is a no go. The door is held in in all sides with active and inactive bolts. You cut the hinge, door is still locked shut.
@@LocksmithRecommended that's good to know. I'm in the market for a good safe, but there is so much junk out there. Thanks.
@@kelalamusic9258 Be sure to check out some of her other videos. We have videos on safe fire ratings. What the burglary ratings mean. And what the main things are that you should look for when buying a safe.
@@LocksmithRecommended thank you. I will!
Is it also sold in Indonesia?
Sorry, I don't think so.
I need something like the safe on the top of the big one
No problem. We sell them on our website. www.acmelocksmith.com/buy-safes-online/small-cash-box-drop-safe-hd-03c.html
Is this safe better than the AM SEC BF 1512?
No. The BF1512 is RSC rated. www.acmelocksmith.com/buy-safes-online/bf1512.html
@@LocksmithRecommended Two questions would you feel confident the average homeowner using the BF 1512 bolted down to the floor and also is the BF 1512 available in an RSC2 version??? Also does your company offer the fingerprint lock or the combination/fingerprint lock for the BF 1512 and how much would it add to the price???
@@william38022 You'd want to bolt it into concrete. We couldn't drop ship one with the fingerprint lock on it because AMSEC does not have a biometric lock. They do not make an rsc2 version. The Next level up would be a Tl-15.
@@LocksmithRecommended I noticed there are different size BF safes some slightly larger than the BF 1512 if I bought one of those larger ones I could weld a 4 sided 1/2” steel box with no front door (because the BF has the 1/2”plate door it would protect the front) and place it in the bottom of the safe and have a bolt go through the bolt down hole 🕳 through the homemade job and through the hole inside the safe itself to secure that homemade box to the bottom of the safe itself and then the bolt would extend through the box and the safe and go down into the concrete if someone did cut the safe open from the side or top they would stillhave to get through the half inch steel plate I could even place a small burg watcher money box inside the homemade job
How about Steelwater Gun Safes? Or Fort Knox brand safes?
I don't know much about Steelwater. Fort Knox makes a great safe. Spendy but good. Here I'm looking at safes at specific price points. And you would be hard-pressed to beat Hollon at their price point.
@@LocksmithRecommended thank you. Steelwater is a South Carolina based outfit, I like what I saw regarding their safes, the seem to have similar to the Hollon safes in regards to standards.
Can this safe be opened with a rare Earth magnet?
The magnet trick was discovered on Sentry safes using cheap casings and tiny solenoids. Thus the magnet has enough strength to pull the solenoid to release the lock. You have this issue with almost all of the big box store safes. That's why you see videos on the technique always being used on cheap, budget safes from big box stores.
Good safes (like this one) use UL-rated locks (S&G, SecuRam, etc...) where the release is motorized. UL-rated locks converted to motorized releases about 10 years ago or so. Because there is a mechanical linkage, rare earth magnets cannot open the safe. The mechanical linkage holds the release in place so it can't be opened this way.
@@LocksmithRecommended Thank you for that great explanation. Totally makes sense. Whenever I see electronic locks I wonder about magnet vulnerabilities and such.
I’ve always wondered...what happens if the batteries die?
Most electronic locks now have the battery inserted from the outside of the safe. Those that don't typically have a key override or a jumper that will put enough juice into the lock to get it open.
Batter on inside or outside?
How much is the smaller safe
The links to the safes are in the description of the video 👍🏻
Can the door be flipped?
I am sorry, but no.
RSC, B rate, C rate, TL 15, Tl 30 or unrated?
B/C rated safes don't really exist any more. A burglary-rated safe without a UL burglary designation (RSC or TL Rating) is a safe that the manufactures builds to withstand a burglary. Basically, it's a much tougher safe than a typical home rated fire safe. UL ratings cost a ton and at this price point, won't be found.
You really have to look at what the manufacture is doing to that safe to prevent a burglary to determine the quality of it. How thick is the steel, the bolts, is there a drop rating (this one is 30') is there a shock relocker, a glass relocker etc...This is one of those safes.
Check out our video: ua-cam.com/video/1X85oZ38NOw/v-deo.html to see the features you want to be looking at to make a secure safe.
We also carry UL rated safes on our website at www.acmelocksmith.com/buy-safes-online/shop-safes-by-type/high-security-safes.html
@@LocksmithRecommended see
Where Can I Buy this At
Acmelocksmith.com
4:24 no bolts on the hinge side?
There's a 1-in wide strip of metal that fits into a 1-in wide recessed groove. So the entire hinge side acts as a single giant bolt. You cannot cut the hinges and remove the door.
LPL: today I’m gonna show you how to get this safe open with a soda can, and half a slice of pizza.
Is the HS-500D a good safe?
Depends. What are you putting in it? Check out our video, how to choose a safe.
@@LocksmithRecommended i just want something large enough that someone cant just walk off with it and that can protect against a thief for less than $600 i know alot of safes are more for show or just fire at that price point :(
@@aaronsanchezz At the price point, the HS-500 is a good safe, but at that price point, there aren't a lot of security features but it does avoid the pitfalls of other brands. I'd recommend bolting it down once you have it. acme-safes-for-sale.com/hollon-home-safe-hs-500e.html
What sort of safe should i get ? I need a small one like the one on the top you have..it dosent ned to cost alot..can you tell me what to get ?
What you will want depends on what you are putting into it. Several things to consider. See:
Article How to Choose a Safe: www.acmelocksmith.com/buy-safes-online/find-the-right-safe/
Our budget home safes are here: www.acmelocksmith.com/buy-safes-online/shop-safes-by-type/home-fire-safes-discount.html
@@LocksmithRecommended Thx but on my travel today i found a safe looking like the first one to 114..i think it was a yale safe in same size
What if you forget your code & lose your key, how can you get your valuables out?
You'd need a safe locksmith.
What are the chances of losing both the code and the key?
When you talk about the bolts you are showing an external view of the bolt. Isn't the important part of the bolt the part that is on the inside of the door? You don't show it but from some accidental views it looks like there is almost zero bolt length inside the door and because of that it isn't possible to give two separated support points for the interior part of the bolt. Basic physics tells me that is not good.
There's a 1" wide strip of steal that fits into a groove along the entire length of the right side of the door. So no, it can't be opened even if the hinges are cut.
You are correct, the bolts are simply bolted to the angle iron bolt work and are only supported in one place by the angle iron they pass through. That's not a great design and high end safes support the bolts in at least two places but for a small B rate safe with a plate door, going into a plate door jamb, as long as they are long enough it's more than sufficient. Although you're right that it's a crappy, corner cutting, cost saving way to do thing's. Sadly this seems to be Hollons major weak point in all of their low end safes.
can you get into it with a magnet?
The magnet hack is for cheap saves. Primarily with plastic casings.
I do not see a option to bolt down what good is a safe you can't bolt it down it doesn't matter how much it weighs if its not bolted down it can be moved
It has a bolt down hole 👍
Thank You !!!
Are they still in business now?
Absolutely. Great company. www.acmelocksmith.com/buy-safes-online/hollon-safes.html
Does it have a gps?
The safe? No.
is it waterproof
Check out our article "Are Safes Waterproof?" www.acmelocksmith.com/blog/are-safes-waterproof/
What is price??
Link in video description 👍
What happens when they have a grinder and take the hinges off?
Nothing. The door stays locked in place by the bolts on the swing side and by a 1" wide steel channel that runs the entire length of the door on the hinge side. I highlight that feature here: ua-cam.com/video/9u-asS7Ldys/v-deo.html
CMI Ozzie safes are the best..!
Not familiar with those.
@@LocksmithRecommended not here to offend, just stating the obvious..
I’m in the market for a safe for my precious medals. I need a decent size for an affordable price. All these home safes looks like they can just be ripped open.
Home safes, like those at the big box stores, are not meant to protect valuables. Have you seen our video on Burglary Ratings Explained and Which Safe is Right for You? The issue is, you say for an "affordable price". Good safes are not cheap safes. Cheap safes are made cheaply. Several years back I had a person tell me they were putting $100,000 of content in a safe but they didn't want to spend more than $300. ??? Makes no sense.
Burglary Ratings Explained: ua-cam.com/video/9u-asS7Ldys/v-deo.html
Which Safe is Right for You? ua-cam.com/video/MeEa-6C5zoA/v-deo.html
A safe is only as secure as your courage not to open it if under threats of burglars, me personally I'd open it in a flash if threatened.
Point taken.
Unless you buy a safe with a 144hr S&G Time lock. Then no matter what they do you can't open the safe for 6 days even if they have the combo.
@@LocksmithRecommended Smash the glass?
@@matthewtalbot-paine7977 Are you referring to the glass relocker? If someone tries to break into the safe using force, it will break the glass and throw the relocker to lock the safe down.
This safe costs more than anything the thieves would be stealing from my house anyway...
Welcome to the Safe Club buddy! We have the Best Protection! :)
Helpful Hint
Buy a Tarantula tank and fill it with cash and tarantulas.
The best safe is Poverty
Can't thieve nothing can they?
True.
Lmfaoooooo
We will all be safer in the upcoming 4 years
I want a good 700-lb safe but I rent. I have 3 roommates, maybe we could move it.
I was thinking the same thing also I want a TL 15 or a TL 30 however 700 pounds would go through our floors there’s just no way you have to get underneath your house and have concrete pillars installed
@@william38022 I have fishtanks that weigh over 800lbs, the safe should be fine.
BUT IT ONLY HAS 1 BOLT
???
Graffunder
sentry safe is still the best safe,your safe has no built in deadbolt inside.
🤣 Sentry. Good one. 🤣
Let me borrow your safes I promise I will give it back within 80 years
😂
Bet one could open it with an axe in 5 minutes.
As a mechanical engineer I really have to laught how cheap these 'safes' are build. It's all air and hefty looks. I guess I have to build my own safe..
Good luck!
Cheap safes are built cheaply. Buy a real TL rated safe, not a bottom tier B rate safe like this. You'll pay for it but it won't be lightly or poorly constructed.
@@tdb19872 I agree! Not everyone can afford a TL rated safe though, so finding the best safe at a give price point is also important.
@@LocksmithRecommended Absolutely, even a B rate, smartly installed, is more protection than most need. I believe most insurance companies go up to 20k in a B rate. They are significantly tougher than most imagine.
Safe vs a criminal with a gun.
I care more about an attack through the side. An angle grinder will go through thin, unhardened metal in about 5 minutes. What has your safe done to protect against that.
You definitely need to check out our video on Burglary Ratings Explained. This is not a high security safe (TL X 6), just a great safe at this price point.
4:19 No bolts on hinge side. Cutting the hinges would allow it to be open from that side.
You can't see it clearly in the video but there is an entire metal channel that runs along that side of the door. When the door is closed, the channel locks into a track in the safe, so the door cannot be opened if the hinges are cut. Larger versions of the safe also have both a top and bottom bolt. There use to be fixed bolts on that side, and they've recently switched to an entire channel.
Boltwork is way too weak
Why?
Just burry it in the yard. No problem no expense.
No.
What do you recommend at this price that is better? 👍
I dont trust electronic safes..
You're not alone. But the electronic locks of old are not the same as new. Just stay away from the cheap safe manufactures, and we find the electronic locks to be every bit as secure as a dial.
@@LocksmithRecommended ok but you need to change batteries, right? lets say you forget how do you open the safe then, you have top open it to change the batteries right? thank you for your reply
@@bingochoice LOL. Yea, in the beginning safe manufactures were putting batteries INSIDE the safe. 🤦♂️ It didn't take long for them to learn this was idiotic. The new electronic locks by decent safe manufactures have the batteries on the outside. The only ones still putting them on the inside are the very inexpensive safes that come with key overrides - just in case. I'm not a fan of those either. But the coolest new locks are BOTH electronic and dial. Should anything happen to the electronics that would be prevent access, you just dial the safe old-school-style. Like this one by Securam.
www.acmelocksmith.com/buy-safes-online/securam-safelogic-xtreme.html
Thanks for the contribution to the channel by commenting. 👍
@@LocksmithRecommended hey thanks very much