Raptor 700 MOTOR PART 2 | Pulling The Motor!!!

Is it easy to pull the engine from a Raptor 700?
Raptor 700 MOTOR PART 1 | Plan and Breakdown
Phase two is complete! Ripped this motor out likitysplit! Here is the process I followed to pull my motor, keep in mind this is my way, NOT the via the service manual! Get ready for part three where I'll be pulling the head, cylinder and ordering top end parts!
If you enjoyed, please comment, like and subscribe to my channel!
Thank you for watching!
Want to reach me? Email me at..
[e-mail]
Add me on Facebook and Instagram
Facebook: / atvcrazy91
Instagram: / atvcrazy91
Miscellany Liquid Chalk Markers
Web: miscellanysupp...
Facebook: / miscellany-supplies-39...
Instagram: / miscellany_supplies
Check out Ashley Tarot
Facebook: / ashleytarot
Music is as follows...
Track 1
Music Credit: OurMusicBox (Jay Man) Track Name: "Tough Streets" Music By: Jay Man @ ourmusicbox.com/ Official "OurMusicBox" UA-cam Channel: / ourmusicbox License for commercial use: Creative Commons Attribution 4.0 International (CC BY 4.0) creativecommon.... Music promoted by NCM goo.gl/fh3rEJ
Track 2
Music provided by Free Songs To Use.
Track - Speo - Stride
Link to track - • Speo - Stride
Track 3
Music provided by TeknoAXE.
/ teknoaxe
www.reverbnatio...
Track - Heavy Metal/Hard Rock
Link to track - • TeknoAXE's Royalty Fre...
Track 4
Music provided by TeknoAXE.
Track - Fuzz Walkabout
Link to track - • Royalty Free Backgroun...
Track 5
Music provided by Teknoaxe.
Track - Like a Ton of Bricks -- Industrial/Downtempo
Link to track - • Like a Ton of Bricks -...
Track 6
Music provided by Cramoki.
Track - Take U There
Link to track - • Cramoki - Take U There

[@joeloyd56]

I appreciate the content.

[@jasonbrody9851]

Yayyy! The raptor is back! Its ashamed the banshee blew up but I've never had good luck out of Chinese parts

[@DoRC]

Generally coolant passages in intakes are designed to keep the intake warm both helping atomize fuel and preventing the intake from icing up.

[@TerrickHarden]

I'm late as usual but those were some bad ass bolt cutters.

[@MichaelSabo]

Haha, no worries man! I hope you're doing well. I still had to squeeze hard as hell to snap the chain.

[@XenoxedYT]

Bro thx so much for this video I love your vids the banshee especially I cracked my case while driving my four wheeler. It’s the same four wheeler or raptor 700 R and this helped me so much to get the engine out man. Thanks so much for posting this video man.

[@vistkri]

Use a scotch brite pad and clean up the swing arm bolt, remember to grease it up before you put it back in. Now when the swing arm is free if I was you I would press some new fresh grease in the swing arm bearings as well:)

[@MichaelSabo]

Great idea!

[@huntertownsend9515]

I’ve been watching this since you first started and I have to say I can’t wait till that beast is running. I’m thinking about getting a raptor

[@pcostyle11]

GrimReaper_068 get a banshee ! Both totally different but so fun

[@MichaelSabo]

Both are awesome! And thank you for following the build!

[@thomaspayne987]

Great video man! Awesome inspiration. Im now working on a new project 400ex! My banshee is still running strong nock on wood...i got the chinese cyl with weisco prolites...ill be happy once i surpass the 9.9 hr mark...im at about 7.2 hrs now...cant wait to see this raptor thump

[@vistkri]

«I dont want to wait to christmas to get that thing» ahahahaha lmaooo😂😂

[@hectortorres3052]

Wowie here we go agian love your vids man keep up the good work f

[@bdogjr7779]

Awesome Mike 🤠 Like a Pro ☻

[@33boblong]

Great video Michael

[@that250fguy4]

For the piston I would go and get a vertex piston I had all wesico in all my bikes and then I put a vertex in my 250 and you could definitely feel a little more power sky te vertex and they’re a great piston from everyone I know that used them agrees

[@MichaelSabo]

Yes, Vertex is great! I ordered a CP though.

[@danielbarker160]

@@MichaelSabo ?

[@imperfectrc8735]

I am rebuilding my banshee you were
inspiration

[@MichaelSabo]

Awesome man! I am glad I inspired you!

[@User37621]

Love the vids.. what made you determine the crankshaft needed to be replaced ?

[@shawnyoung3593]

That was pretty tight😂 u where so serious lol

[@gabyg00gletv18]

Good job💪🏾

[@gersonromero4967]

I been waiting since you post it on Facebook

[@robertmason62]

Sometimes I forget those are brand new tires

[@anthonyk6265]

I'm just starting the same process approximately how long did it take you hour wise to do this you think seems like I'm on the same skill level as you LOL good videos

[@evanhord3038]

You should get some impact sockets before you have to pick a chrome one out of yourself

[@MichaelSabo]

You are 100% correct. I've already blown a few apart. As the money comes, so will the tools.

[@wesley-yz2dn]

wow nice man please upload daily

[@imperfectrc8735]

Love your vids man keep the banshee tho

[@garyhamilton4533]

Hey Mike how’d you know the crank was bad?

[@shadowis350]

What tools did you use to get the swing arm bolt loose

[@upshiftclutchups665]

If you bought the crank from Rocky mountain atv it would have come with every bearing and seal and gasket for the bottom and top end

[@upshiftclutchups665]

For my trx450r for the kit cost like 450

[@MichaelSabo]

I checked them out and they have great deals. I saved about 50 bucks buying separately.

[@bran.450]

You should have took the top end off first then pulled the motor it would have been easier so when you put it back it put the bottom end it the frame then put the top end together on the frame it’ll be a lot easier

[@MichaelSabo]

I may do this. I like doing the motor outside of the frame though. Thanks for the tip!

[@DoRC]

It's a really bad idea to pound on the end of a threaded rod with something that's steel. Get a brass rod for those kinds of jobs. It's way to easy to mushroom the end of the rod and ruin the threads.

[@not_max8111]

my man cant wait till you find out what snap-on is.

[@not_max8111]

this is a joke

[@limitlesshorsepower4514]

happy 4th y'all

[@jeremyperez8753]

How do you know or how can you tell when the crank is bad?

[@robertmason62]

And grab bar

[@g_family1123]

So what you doing now you going to strip it to frame and get it all powder coated? Only like 5 min into vid btw lol

[@MichaelSabo]

Not this time around, just the motor and then I'm throwing her back together!

[@johnb3231]

Thought for sure the swing arm bolt was gonna screw you. Took me like 5 hours to get mine out on the banshee. Do yourself a favor coat that thing in never seez when you put it back in

[@MichaelSabo]

Oh my god dude.... they can be a nightmare. Definitely a great idea on the antiseize.

[@upshiftclutchups665]

Oh and every time you get a new chain u should always get new sprockets

[@MichaelSabo]

I might go ahead and do this, I was looking at the wear on my sprockets.

[@williame2315]

Do you even lift?

[@cryptixwisdom7455]

Oil. Aka water

[@imperfectrc8735]

14th comment

[@huntertownsend9515]

First comment

[@abergen24]

Hot rods are junk!!

[@jasonbrody9851]

Yayyy! The raptor is back! Its ashamed the banshee blew up but I've never had good luck out of Chinese parts