Це відео не доступне.
Перепрошуємо.
Yamaha Raptor 700R Engine Build Part 1: Bottom End Build | Partzilla.com
Вставка
- Опубліковано 25 кві 2019
- See the components for part 1 of our Yamaha Raptor engine build here: bit.ly/Yamaha-R...
Note: our phone number has changed! Call us at 1-229-584-0046 for help finding the right parts for your maintenance needs.
If you’re planning on doing an engine rebuild on your Yamaha Raptor 700R, we can help you out. We’re doing an engine build on a 2017 Yamaha Raptor 700R, and it all starts with the bottom end.
We’ll start by getting our parts clean, and then we’ll work on pressing the bearings into place on the crankcase halves. Next, we’ll install the crankshaft assembly. Once we’ve got it in place, we can build up the transmission and get it installed before we take care of the last few housekeeping chores and close up the crankcase.
Check out these diagrams to see where we’re working:
Crankcase cover diagram:
www.partzilla....
Crankshaft/piston diagram: www.partzilla....
Shift cam and fork diagram:
www.partzilla....
Transmission diagram:
www.partzilla....
Read how to do this job step by step: www.partzilla....
VIDEO HIGHLIGHTS:
Prepping crankcase halves - 1:20
Pressing bearings into place - 2:15
Installing retainers and keepers - 7:23
Building the transmission - 10:40
Installing the transmission - 16:00
Installing counterbalancers - 19:45
Closing crankcase - 20:00
Bolting the crankcase - 23:15
Find thousands of Yamaha ATV parts here: www.partzilla....
Talk to us:
Twitter: / partzilla
Facebook: / partzilla
Instagram: / partzilla
In the video we’re working with a 2017 Yamaha Raptor 700R, but you may have similar steps for your Yamaha ATV. If you’re not sure whether these steps apply to your machine, leave a comment and we’ll get back to you.
RELATED CONTENT:
Yamaha R6 engine build playlist:
• Yamaha R6 Engine Rebuild
Yamaha YFZ450R repairs:
• Yamaha YFZ450R Repairs
#yamahaatv
#partzilla
#atv
Im such a gear head i dont even have a raptor and watched every minute lol. I love the quality in these videos as well!!!
songer121 me too ! Good stuff!
Tho I have a Polaris scrambler would be cool at some point to go through it 👍🏻
Partzilla's UA-cam videos rock!
Wow thanks alot for this video! I have a 2017 raptor 700 I've been trying to get the new crankshaft into and my trans fell apart on me in the process and didn't know how to reassemble. This video helped alot for me. Thank you.
Nice to see professional work! Respect
Clean and thorough were guaranteed👍
Nossa muito bom o site de vocês .... não tem nada parecido aqui no Brasil 🇧🇷
Parabéns pelo vídeo, obrigado pela aula.
gr8 instructional videos!!! i could watch these all day…
YESSSS HE'S BACK!!!!!!
Cool video.
thanks for sharing sir
Good job sir
fantastic ... as always.
I am also in the process of restoring the engine of my Honda XR400 and although it is not the same engine, the assembly is very similar, excellent work and professionalism
Nice to see your still helping us are you going to be doing any moor work on that gsxr
Yes! We have some more GSXR videos in the works. Subscribe for notifications, or keeping hanging in the comments and we'll let you know when some new stuff is ready. We like to jump around and work on a couple machines from our garage at a time. Gotta share the love... This Raptor engine was a beast! Took some serious time.
The last bearing you installed on the case with the oil seal behind it for the upper counter balance shaft has a groove on it. Does that go towards the outside of the case?
Great work
Very usefull! Thanks!!
Good job
Dude knows his shit
If you heat the cases in the oven or grill to 250 degrees Fahrenheit and freeze the bearings they drop right in
You should do a video like this on a Yamaha raptor 660r
I’m having difficulties with the reverse gear
Whats going on with it?
I'm working on a 2006 700R and it has clips on the shift fork shafts on either side of each fork. This makes this assembly ridiculous because you cannot build it as shown here. Has anyone removed the clips on the shift fork shafts on a 2006 with no issues?
Scott Puopolo that’s my question! He makes it look really easy but this illustration can’t be completely relevant to the 06 model. Frustrating!
Hi, i have a question. Is the Counter Weight Balancer the same on all Raptor 700 model year ? Because i have a Balancer (Weight 2) from an engine model year of 2010 to put in my engine of 2016
Nice works.
sir plz one video 350 Raptor transmission assembly complete fitting
fitting can be found from assembly drawings of certain engine subassemblies. Try motosport.com/oem-parts/
You should do a Suzuki ltr 450 engine rebuild !!!
Noted!
KFX450r as well please !!
I would let you build my engine any day great job
I have a question I have a TRX650 Honda Rincon and my dad and I just finished up putting it back together had to have a whole lot of repairs but anyways we cleaned the carburetor and got it back in it and everything else but now when we start up we can push on gas and it’ll go and everything but as soon as you lift off the gas it completely just shuts off do you have any clue what could be wrong with it
The father we all wish we had
You’re awesome!
I like your videos 👍
I’m installing the transmission now and the forks will not align with the drum at all
Freezing bearing overnight helps with installation big time.
I have a 2007 Yamaha raptor 700. the chain was set too loose and it wrapped around the front sprocket and busted the case and bent the shifting rod. I had the case welded at the local machine shop and replaced the shift rod only to find the quad only has 1st and reverse. My questions are how similar is a 2007 for 2017 and does your website have the correct parts for my year. Much appreciated
2007 Yamaha Raptor 700 parts are here. This link will get you started: www.partzilla.com/catalog/yamaha/atv/2007/raptor-700-yfm70rw
@@PartzillaParts thanks for getting back with me. much appreciated
Please do a Yamaha 350 case build
I am surprised you guys don't offer amsoil oil.
Thank You for posting this! I was planning on having my 07 raptor rebuilt this summer, but was hesitant to do it myself. After watching this video, I might give a crack! Did you by chance have a disassembly video?
Not for this one as we ordered every part from Yamaha to build it. 528 parts to be exact!
We built this one from scratch, SportsRoof -- so no disassembly this time. We do have a few other engine teardown videos if you're looking for a general reference -- or you can always shoot us a question in the comments here if you have any specific questions while you're breaking yours down.
@@PartzillaParts I have 2019 700r I need to disassemble & change cracked crankcase
Sir I want to work with you.
This work is my dream sir.
Please reply
Clapptor Rebuild!!!
Hi mate, I am going to be rebuilding a raptor 700 engine soon for a mate, I was just wondering, do you need a bearing press like you used or can you just use a bearing driver like what is used for wheel bearings? Thanks
A press is much easier, but you can get them in and out manually with a driver.
@@PartzillaParts ok great thank you 🙂
Is this motor the same as a 700 kodiak ?
Do u guys work on quads for customers
What size hole you put in the plate?
Добрый день можете ли вы переводить видио на русский ME RUSSIAN
SAPARATE SPEEKING GEAR
How do I get part Zilla phone number
Our customer service number is 1-877-473-4595 Mon-Fri, 8AM-7PM EST