Installing 3rd Function Hydraulics on Mahindra 1626 for Grapple Use
Вставка
- Опубліковано 17 тра 2020
- Picked up a new Grapple implement.
1:23 Installing a 3rd Function Hydraulic Valve Kit on my Mahindra 1626 Tractor.
9:39 Burning Brush
(Updated Part Number and Link)
WRL-3RD-FUNC-KIT
everythingattachments.com/tra...
(At the time of making this video, this was the part number)
Everything Attachment's PN TRA-3RD-FUNCL
www.everythingattachments.com... - Авто та транспорт
Great video, thanks for sharing this.
Thanks again for this video on the installation. I Received the Valve and installed it. Install went flawless and I even copied your loader knob idea! Also, your issue with the connectors really helped me as well. I called The company I was buying the grapple from and asked what connectors were on the grapple. There is an Ag connector, or a flat face connector. The Titan log grapple I purchased comes with a flat face connector so I call Everything Attachments to make sure that the loader end had flat face couplers. They said it had ag connectors and to upgrade to the flat face connectors would be an additional $75. Well worth it as I didn't have to chase around and find adaptors. Again, Thank you Cor!
Great Video; I may have to look at 3rd function for my Mahindra Max 26XLT ;)
Very helpful ! God Bless !!!
Just got one of these tractor a couple days ago , so far I’m pretty satisfied one con so far is the low hp. The area I live in has a lot of steep hills and roads and pulling some hills really bogs the lil 3 cylinder diesel down… other then that I think it’s a great lil tractor
If you curl under and straight up and down and push while picking that brush up, you can pick that entire pile up , that 1626 pound for pound is a beast !!!!!!!!
Good video!!
Thanks!!
Très belle vidéo
Très beau tracteur
Bonne idée d'avoir rajouter une valve hydraulique pour le grappin sur la fourche
I just bought a W.R. Long 3rd function kit for my Mahindra 1635 and I had the same problem with the new knob. The metal insert of the new knob is bored out too small. I called W.R. Long and they apparently know about this issue and sent me a replacement sleeve for the knob that fit. What I find surprising is you made this video nearly two years ago and they are still shipping out the kits with the wrong size sleeve.
My ls mt 125 has 7 hard lines. My summit universal 3rd function kit wants one to the PB and the other one to backhoe, 3 point, or rear remotes...
Where did the kit come from on the mahindra 1635 tractor?
Just wondering if you still had a link to the 3rd function kit you bought. I can't seem to find one that actually says will work on 1626 mahindra.
www.everythingattachments.com/3rd-Function-Hydraulic-Kit-p/tra-3rd-funcl.htm
Everything Attachment's PN TRA-3RD-FUNCL
If you have FB, there's a group you may be interested in, for help with questions or concerns. Its pretty helpful to many people.
Mahindra Tractor Owners - USA
facebook.com/groups/mahindratractorownersusa
Thanks for sharing!! How has it been holding up for you?
Great video! Can you open and close the grapple while lifting the bucket, or open and close grapple while tilting all at the same time?
Yes, but everything goes slower because the system can only push so much fluid lol. My buddy has a jd 1025 (ive also driven a 2025) and for some weird reason you cannot curl and raise/drop at the same time, its so frustrating lol.
@@CorMorse That’s sweet. My tractor should be here on Thursday, and I’m glad I found your video. The dealership wants $1700 just for the valve from Mahindra. This will save me a lot of money and I can do it myself. Thanks for the video, the link to where you bought the valve and the reply!
I am looking at doing this now on my tractor. How do you like it? Anything you would change about it? Where did you find info on where to tie in the 3rd function on your hydraulics?
I love having front hydraulics on this. On my property and what I do, a grapple is a very important tool to have.
As confusing as the instructions were, it was all laid out and the tractor had all the hook ups needed right by the controls.
My only complaint, and its really not even about the kit, is I should have gotten a lighter/smaller grapple.
Just ordered mine. Thanks for a great video!! What is the brand of chainsaw holder? What do you think about it? I cant decide what I want to get and if it will get knocked off easily or not
Its called the SawHaul. They were relatively new to the market when I got my tractor, paid $100 for it. I'm sure the prices have increased (as with everything else lately) but it works great if you dont care to make your own saw holder. The only downfall is that the bar holder is all 1 piece plastic, and the saw dogs wore the top of my bar holder out pretty bad. Just cosmetic damage, but it would use a beefier top portion. Pretty sure the man who owns this company is still in the Mahindra tractor FB group
I appreciate the reply!
I think I’ll take my chances and order it. The price has gone up substantially since your purchase, but that’s just life.
Mahindra is liked by most of the Indians including me.. trust me brother if a poor country like mine likes it.. it automatically means the quality is superior.. we cant afford another tractor for next 25 years..
I love this comment, 😂
Where did you get this kit and what was the price
$837 from Anything Attachments. Here's a link:
www.everythingattachments.com/3rd-Function-Hydraulic-Kit-p/tra-3rd-funcl.htm
Did you disconnect the power steering hydraulics and put the grapple hydraulics there? Looking at my tractor that seems to be where those hydraulics go.
Nope. Connects from the bucket controls. Check out 1:50 mark
Is you third function kit "open center" hydrolics? Or did they supply you a restricter. For the return.
I'm not sure. This system takes 2 lines from the existing FEL lines and runs them into a new solenoid for the 3rd function. I assume its just a supply and return.
WHAT BRAND KIT DID U USE
www.everythingattachments.com/3rd-Function-Hydraulic-Kit-p/tra-3rd-funcl.htm
Everything Attachment's PN TRA-3RD-FUNCL
Is that a stock joystick?
The position of it, yes. The very top portion is new with the kit and houses the button for the 3rd function hydraulics.
Is that an "Everything Attachments" kit?
Yup. TRA-3RD-FUNCL from their website.
@@CorMorse is that their grapple too?
@@justinshaw5706 Different company. Nothing fancy, pretty sure its the same generic grapple that everyone sells for cheap
@@CorMorse is this 3rd function kit tractor specific or a universal kit?
@@duckquak5 Specific to this tractor. The hoses seem longer than needed so I assume its made to fit multiple different tractors.
8:58 I should call her...
‘Facing the back of the attachment.” Maybe not the clearest way to say “facing forward.” Lol
As it's been 3 1/2 years are you still happy with your set up?
I did click the link to the solenoid and no longer good. Oh well, it happens.
I have the same phone number on my sticker with new owners name.
Thanks for the comment. I'm still happy with the setup. The grapple on the other hand... it was cheap, and definitely shows in the quality. The right side 2-prong arm out front is bent pretty good. Still functions as it should though, so no real complaints. I did bash up my grill bad the other day, so an open arm grapple like I have may not be the best implement to use for clearing trees and brush.
I had to do some digging to find what happened with the link. Ive since updated my post to reflect the new link, but here it is if you're in the market: everythingattachments.com/tractor-loader-3rd-function-hydraulic-kit/
@@CorMorse Thank You for the updated link. I prefer the at my finger tip style over mechanical (have to reach for it) style. I prefer the price of mechanical though. Hoping in the spring for this and a root rake grapple as I'm fighting Sumac.
Gary's sold out to Clifton's but same number and address if your still in this area code.
@@normhowes2975 Oh ur local too! Yup, I sometimes get my stone from Cliftons, their prices are good. I was chatting w the guys there over the summer and if Micron comes through, they'd be more than willing to sell their land and walk away. I don't blame them honestly, u can put a Mahindra dealer anywhere from Mexico to Lafayette and it'll still get business. They have 2 other Clifton bulk lots in the area too, so no loss there.
@@CorMorse I'm not that far North of Great Northern Mall. They could put a dealership in Hastings and I would still go there. Can't blame them if they sold to Micron.
@@normhowes2975 Wow we really could be neighbors. My property is about 10 mins north of Great Northern lol
Why not clean your equipment before that kind of install? You would really be screwed if you got dirt in the system
I looked through the comments 1st to see if anyone else noticed how dirty his 1626 was. I try to clean the whole thing after every other use or so.
It came with one on my new Kioti tractor. I also got two rear remotes. I priced a Mahindra. I couldn’t justify spending $6k more for a name. The Kioti has about a 400 lb better lift capacity. I love it. Sorry Mahindra, your like John deer, you think we will by the name. No thx. Daedong makes your engine too. Same as in my Kioti. Research before you buy people. They are good deals out there!!!!!
Thats pretty interesting. Back when I was researching tractors, I dont think I even knew about Kioti's. The local dealers here are Mahindra and JD, and Mahindra beat out the competition in price and lift capacity. Doing a quick search just now, there is a Kioti dealer about 45 mins away, so it def would of been in the running for purchase. I got a pretty good deal on my Mahindra, and even a year later, buddy of mine (he went back and forth between Mahindra and JD too, but settled on a JD 1026 for a decent price) couldnt get the price down to what I paid for. I believe the 1626s use a YTM and Mitsubishi engine. Mine has the Mitsubishi.
Buy some wrenches and stop using adjustables!
haha. my old army mechanic instructors said the same thing. Back then it mattered. Now it doesnt. ;)