![Cor Morse](/img/default-banner.jpg)
- 47
- 212 808
Cor Morse
United States
Приєднався 27 лют 2014
Brick Paver Walkway Removal
Job here was to remove existing brick walkway to prepare for a new concrete walkway. $50 auto ramp failure leads me to purchase actual heavy duty ramps which will be featured in different trailer video.
Переглядів: 92
Відео
Deck on Grade Addition
Переглядів 398Рік тому
Customer wanted a deck addition laid on the ground addition next to her existing ground deck.
Fixing a Pothole - Timelapse
Переглядів 140Рік тому
Country crews left this low area when they repaired the sewer drain. I'm just filling it in for the business owner.
Building A Generator Hut at The Barn
Переглядів 662Рік тому
Replacing my old tiny generator hut for a larger one, using all free materials (minus the nails). This one can house multiple generators while being able to add fuel or change the oil without having to remove them for more space. Pallets were free on the side of the road. Roofing material was pulled off a jobsite and saved from the dumpster. Outdoor carpet (used for sound deadening) was extra m...
3000SF Slab Pour 5 Min TimeLapse
Переглядів 79Рік тому
Timelapse video of a 3000 sq Barndominium concrete slab being poured.
Toothed Tractor Bucket
Переглядів 3052 роки тому
Welding a quick attach frame to an old Case bucket, then using that bucket to move some dirt. Mahindra 1626 Millermatic 211
Office Remodel Collection - Day 5 (Timelapse)
Переглядів 442 роки тому
Start to finish of my work during an office remodel a while back. Work took about a month. Turned one large area into several office rooms.
Office Remodel Collection - Day 4 (Timelapse)
Переглядів 272 роки тому
Start to finish of my work during an office remodel a while back. Work took about a month. Turned one large area into several office rooms.
Office Remodel Collection - Day 3 (Timelapse)
Переглядів 242 роки тому
Start to finish of my work during an office remodel a while back. Work took about a month. Turned one large area into several office rooms.
Office Remodel Collection - Day 2 (Timelapse)
Переглядів 292 роки тому
Start to finish of my work during an office remodel a while back. Work took about a month. Turned one large area into several office rooms.
Office Remodel Collection - Day 1 (Timelapse)
Переглядів 392 роки тому
Start to finish of my work during an office remodel a while back. Work took about a month. Turned one large area into several office rooms.
Repairing Flat Tires on my Mahindra 1626 Tractor
Переглядів 5562 роки тому
Not sure when it happened, but I ended up with a flat front tire and holes in a rear tire on my Mahindra 1626. This video is me patching the tires.
Installing LED Lights to my Mahindra 1626 Tractor
Переглядів 5 тис.2 роки тому
Purchased an LED kit recently which included an LED flood/spot light bar, 2 LED flood lights, and a wiring harness. Installed them onto the ROPS of my Mahindra 1626 tractor. The factory lights are bright enough, but with the REL in the way, its almost impossible to safely work in the dark. Amazon Affiliate Links: LED Light Kit: amzn.to/3EdC8A2 Heat Shrink Gun: amzn.to/3p7wJpO Heat Shrink Solder...
Storm Tree Road Cleanup
Переглядів 632 роки тому
A tree fell into the road due to high winds last night. Thankfully its winter (and the tree was dead) so it made clean up a breeze. haha. Chainsaw is a Husqvarna 450.
Tent Job WoofStock 2021
Переглядів 683 роки тому
Installation of 2 20x40 pole tents and an 8x16 stage for WoofStock, an annual animal rescue charity festival to raise funds and to help the adoption of local shelter animals.
Repairing a beat up Brush Hog - AGAIN!
Переглядів 2,7 тис.3 роки тому
Repairing a beat up Brush Hog - AGAIN!
Dome Scaffold Pt 3 - The Load out - Real time video clips
Переглядів 433 роки тому
Dome Scaffold Pt 3 - The Load out - Real time video clips
Installing a French Drain Between House and Massive Backyard Hill
Переглядів 1293 роки тому
Installing a French Drain Between House and Massive Backyard Hill
Hot Water Project at the Off-Grid Barn
Переглядів 423 роки тому
Hot Water Project at the Off-Grid Barn
Replacing the rear shocks on a 2007 F150
Переглядів 1,7 тис.4 роки тому
Replacing the rear shocks on a 2007 F150
Repairing the Anti-Sway Bars on a Mahindra 1626 Tractor
Переглядів 1,1 тис.4 роки тому
Repairing the Anti-Sway Bars on a Mahindra 1626 Tractor
Pouring off a 30x36 Pole Barn Concrete Slab
Переглядів 11 тис.4 роки тому
Pouring off a 30x36 Pole Barn Concrete Slab
Repairing a beat up and rusted out Brush Hog
Переглядів 14 тис.4 роки тому
Repairing a beat up and rusted out Brush Hog
Timelapse of a concrete basketball pad
Переглядів 5004 роки тому
Timelapse of a concrete basketball pad
Timelapse of a Stampcrete Patio Install
Переглядів 1304 роки тому
Timelapse of a Stampcrete Patio Install
Installing 3rd Function Hydraulics on Mahindra 1626 for Grapple Use
Переглядів 57 тис.4 роки тому
Installing 3rd Function Hydraulics on Mahindra 1626 for Grapple Use
My work truck is a 14,5.0 dealer charged my company 1800$ for a water pump and two hoses.
Very helpful. Thank you!
Is you third function kit "open center" hydrolics? Or did they supply you a restricter. For the return.
I'm not sure. This system takes 2 lines from the existing FEL lines and runs them into a new solenoid for the 3rd function. I assume its just a supply and return.
You dont need to move the throttle body! waste of time
Think I had to remove it to get to a bolt, can't remember. Either way 4 bolts for the tb for better access isn't a waste of time lol
I need to do a similar job on my brush hog. What kind of material did you use and where do your source it from? I'm a total noobie when it comes to fabrication.
Had a buddy who's dad was a tin knocker. I was able to get a large piece of 1/8th in metal from him. The rest (smaller flat stock and rebar) can be purchased at ur local big box hardware store. I try to keep my projects cost effective, so if I can trade or find used items off the marketplace, thats the best option.
if this only took you an hr why tf was I quoted $750 including a coolant flush lmao
I was getting a vehicle inspection not too long ago and saw their flat rate labor sign. $175 per hour! Plus you know, 200% mark up on parts and fluids lol. Highway robbery these days.
Did you disconnect the power steering hydraulics and put the grapple hydraulics there? Looking at my tractor that seems to be where those hydraulics go.
Nope. Connects from the bucket controls. Check out 1:50 mark
Thanks for the video, very helpful! Ironically, I am changing my 2014 5.0 at the 167k mark as well!
I followed everything you did in my 1533. I don’t have a manual so your video was the very helpful. Thank you.
As it's been 3 1/2 years are you still happy with your set up? I did click the link to the solenoid and no longer good. Oh well, it happens. I have the same phone number on my sticker with new owners name.
Thanks for the comment. I'm still happy with the setup. The grapple on the other hand... it was cheap, and definitely shows in the quality. The right side 2-prong arm out front is bent pretty good. Still functions as it should though, so no real complaints. I did bash up my grill bad the other day, so an open arm grapple like I have may not be the best implement to use for clearing trees and brush. I had to do some digging to find what happened with the link. Ive since updated my post to reflect the new link, but here it is if you're in the market: everythingattachments.com/tractor-loader-3rd-function-hydraulic-kit/
@@CorMorse Thank You for the updated link. I prefer the at my finger tip style over mechanical (have to reach for it) style. I prefer the price of mechanical though. Hoping in the spring for this and a root rake grapple as I'm fighting Sumac. Gary's sold out to Clifton's but same number and address if your still in this area code.
@@normhowes2975 Oh ur local too! Yup, I sometimes get my stone from Cliftons, their prices are good. I was chatting w the guys there over the summer and if Micron comes through, they'd be more than willing to sell their land and walk away. I don't blame them honestly, u can put a Mahindra dealer anywhere from Mexico to Lafayette and it'll still get business. They have 2 other Clifton bulk lots in the area too, so no loss there.
@@CorMorse I'm not that far North of Great Northern Mall. They could put a dealership in Hastings and I would still go there. Can't blame them if they sold to Micron.
@@normhowes2975 Wow we really could be neighbors. My property is about 10 mins north of Great Northern lol
why up in the air ?? why taking wheels off ??
Mine manual shows 23 quarts for Hydrostatic transmission
Thanks for the info! Where did you get yours at? Can you do both sides and did it help? Benefits, gas mileage, cleaner better running engine? Liked the water pump video!
What is the silver cylinder that is bolted to the radiator with the two hoses coming out of it on the passenger side? Also what is the purpose of it? Thanks for any info!
Thats a catch can. It essentially ties into ur pcv line and collects the oil vapors in the can before it gets recycled into ur intake. From my understanding on these coyote engines, the pass side gets way dirtier than the drivers side, so thats the one I did.
I search “2015” UA-cam gives me 2014. Fucking hate UA-cam
Great video no BS!
Great work!!!
❤
8:58 I should call her...
I been having a problem with my hydrolics all of a sudden. Any time i liftes the loader or the 3 point hitch, it stutters kind of like there is a clog or air in the system. It works, but it stutters. There is obviously and issue. I bought the tractor used and im not sure if the initial service got done. I need to go back outside and check the amount of hours on it. I hope the pump aint going bad. 1626 Hydro
I wish I knew more about tractors to help you out, but it almost sounds like an engine problem. Since the hydraulics pull power from the engine, if the engine isn't running as good as it should, id assume you'd get some sort of chugging or hesitation. Id start by replacing all filters, but after that... idk.
@@CorMorse my engine seems to run fine. I just checked. Only got 36 hours on it. I'll get it figured out.
@@sobrietydrummer2 Good luck, and let me know what u find!
I would check fluid level. When a hydraulic is used, it pulls fluid from a reservoir so if the fluid is low, it will suck air and stutter. Best way to see this is with a hydraulic vehicle lift. Watch the reservoir when the lift is up and when it comes down. Also check for leaks wherever you park it. 36 hours isn't much, but anything can happen. If you park on dirt the easiest way to check is put cardboard under it.
Thanks for this. Best video I’ve found for doing this.
Learned a long time ago when replacing the pump Replace the t stat as well.
Thanks for the info. I’m about to change one shortly.
If u dont live in the rust belt like I do, it should be a pretty easy job. Good luck!
Thank you brother
Isn't gear oil that goes in the front?
I changed my water pump without taking the throttle body off
Dude, I just did my 4.6 2007 Ford F150 today and if I don’t known about this trick I would’ve finished much quicker. I got it on there but this is amazing. I wish I had a done more research. Thanks dude.
How do you like that chainsaw holder? They looked brittle to me. Just purchased 1626 also. Great video
Its nice, bring able to carry a saw with you. The top area is pretty beat up from the saw dogs, but it still works and hasnt broken off yet lol.
You need to add some flat stock to both sides of the bottom edge so it does dig in the ground
Yeah, I noticed on hilly ground it would slice right through. Is that normal on new brush hogs or just 'good2go' for this one?
Please tell me you disconnected the battery on the tractor while welding
Where did the kit come from on the mahindra 1635 tractor?
What about that fill contraption you have built there? Show us how please
thanks for the vid, looks about as rusty as my 07
Welded mine twice but the design is faulty! Always gonna break at that last hole like yours. That’s where I pin most implements to keep them behind the tractor. I converted to aftermarket chains ($50 for 2) and eliminated the problem. Not enough meat on that bar!
Mike Allen, what did you order for the replacement? Ive been looking for something to replace mine also.
Yes, mine did the same thing. I had them welded twice. Welder said horrible design and metal. Where did you get the aftermarket ones to fit? Thanks.
Thank you. Your a blessing.
There is a 12 volt DC connection point behind the operators seat. From what I have learned it is for the addition of lights. Good install though!
What! I'll have to look into that! Could always add a USB port so I can charge my phone now lol.
Thanks so much for this video. Extremely helpful.
No risk of cooking the computer on the tractor by welding on rear attachment and having it still connected??
Ya know, I guess after so many years of welding on machines, I kinda just stopped disconnecting the battery and nothing bad hasn't happened... yet. lol.
Strong work!
Did I miss it? Where do you put fluid IN for the rear end?
Right next to the dipstick located by your feet. Kind of a pain in the butt to fill
@@CorMorse “right next to”…? Or do you mean the same hole on the floor between my feet with the cap that says “oil” and has a dipstick attached to it? There is nothing else down there except for the single cap/dipstick that says “oil” on it. I saw someone else ask about the 1/2” plug/nut above the PTO, nothing goes in there?
@@2dollab178 Hmm, I don't have my tractor right in front of me, but on my 1626 hst I'm pretty sure there's a separate dipstick. Either way, that cap is for the hydraulic system, which is separate from the front axle.
@@CorMorse oh gotcha, I have the 1626 shuttle, maybe there’s a difference in that regard. How about that 1/2” square nut/plug above the PTO in the rear? Do you have one of those on your HST and if so, do you know what it’s for?
Wow, that deck is in worse shape than mine, and that's saying something.
Is that a stock joystick?
The position of it, yes. The very top portion is new with the kit and houses the button for the 3rd function hydraulics.
bearing in my water pump went today so thank you sir for the vid
Does the O-ring for the metal heater outlet tube (that fits down into the top of the water pump) come with the water pump? If not, where did you get it? Thanks.
The o-ring that fits between the water pump and engine? It came with the pump I purchased from napa.
@@CorMorse I meant the small black tube that inserts into the top of the water pump. It has an O ring and I was just wondering if it came with the water pump?
@@fredmeyer3063 Oh ok. that one does not come with the water pump. its part of that hose
Hey Cor have a idea find some. 18gauae old trunk panels lay them.ovee those r bars paint the frame red those panels over the R bar white it look like a Hydro boat
Cor I go to the metal scrap and replace both with a cut and straighten that straight piece honestly
Please do a narrative version. Better to know why your doing it, show and tell visors are always better when it comes to car repair, it teaches precautions, but over all it was a good video.
My ls mt 125 has 7 hard lines. My summit universal 3rd function kit wants one to the PB and the other one to backhoe, 3 point, or rear remotes...
Very helpful ! God Bless !!!
For anyone new to tractor's never pull something off of a spinning pto shaft . Especially a tarp !!! It can get caught lightening quick around your wrist or arm and literally pull your arms off . That HAS happened pulled one young man's arms off . Both !!!