Just installed one on my 4530 to run my grapple was a rather easy install. I installed on the lift function seemed like the more natural position. My tractor is a 06 model and felt this was the best unit for me to avoid any electrical problems.I ran my hoses on top of the loader arm since i have a muffler that is close to the arm. Mounted the control valve next to the loader control for easy excess. Andrew was very prompt in answering a question I had about my purchase and my kit arrived in a few days. Very Pleased with my purchase. Charles H. / central Va.
i just installed the kit on my BX23s. Works perfect, I didn't like the way the valve bolted to the curviture of the instrument panel, but by adding a short piece of 1/4 inch pipe on the top bolt cut on a slight angle and a longer bolt, it straightend the valve up and made a much more professional job. Thanks Andy
could you potentially run all 4 houses on the diverter? I want 1 to control the top assembly and 1 to replace the lift arm/leveling assembly on 1 side. For box blade work.
How does this work with a grapple? I would need the lift and tilt functions to operate as well as the clamp functions of the grapple. Would this kit work for that application?
i traded in my 4540 mahindra for a new 5145, can you make a kit for this tractor for the same price? and do i need to call you with all the hose lengths.
Absolutely! Yeah, to be sure of the fittings, I'll want you to send me a couple pictures, and we'll be off to the races. Same price - a little different hose length or a changed fitting all comes out about the same to me. 541-972-0546
Yes, I build for the Mahindra Max series. Is it a Max XL or Max XLT? This mount differently, but I can build either one. Send me an email or text (located on my website) and I'll send you pictures of the mounting. www.tractorinnovations.com
Yes, this works great on a 4025. You can run this kit off of one of your loader circuits or off of the 3rd function. Your choice. The switching valve mounts neatly on top of the flat shield over your loader valve. Simple install.
I have a Mahindra 3016 like in the video. I already have an additional remote on the front for my grapple bucket but I’m wanting one for the rear. Any thoughts on how to do this?
Yes - it'll work great. You have the choice of diverting fluid from the 3rd function or the loader circuit. You can choose how you want it setup. If you rarely use the grapple at the same time as whatever you want hooked to the remote, that's a great option. Or you can have it hooked to one of the loader functions. Here's a link to purchase directly. I'm still working to get my website updated for the Mahindra. www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=A3XMP9GPG5FX8 Or give me a ring with any other questions or to order. Andy 541-972-0546
Yes, I've recently done that exact install with two complete kits (giving you 4 ports), and it went really well. I can send you pictures. Send an email tractorinnovations@gmail.com I can knock $50 off the second kit.
Yes, that's exactly right. With two kits, it's pretty cool, you control both remotes from the one control lever. I give a discount of $50 off the second kit. Give me a call or check out my website to order. www.tractorinnovations.com
Have you ever installed one of these on a Mahindra 15 series? I have a 2615. I thought on my tractor you would likely tie into the hydraulic block under the right side. My application would be to run a top and tilt.
Yes, I've built kits for 2615 and 2815 tractors. One kit provides one circuit - two ports. If you need two circuits, I help customers with double kits all the time. I can knock $50 off the second kit. Give me a call. 541-972-0546
Hi Reid, I’ve built kits for lots of similar tractors. I just need pictures of the loader valve and quick couplers, and I can get it going for you. 541-972-0546 or tractorinnovations@gmail.com $550 out the door.
I HAVE A MAHINDRA 2638 WITH A THIRD FUNCTION VALVE TO RUN MY GRAPPLE. DO YOU HAVE A KIT TO DIVERT THE FLUID FROM MY THIRD FUNCTION VALVE TO THE REAR? i WANT TO RUN A HYDRAULIC TOP LINK.
Yes, this kit works great coupled with a 3rd function. Knob in, it controls the grapple, knob out, control your top link. Easy install. I can ship the next day usually. I sell hydraulic top links as well in a few sizes. www.tractorinnovations.com
I have a Mahindra 1626 with a backhoe. Would this kit work with my tractor? Would I need this whole kit or could I maybe use the hydraulic ports from the backhoe and order a smaller kit?
This kit will work well for you, and won't touch the backhoe hydraulics. The backhoe system received flow, but doesn't have a valve to control the remote function. This kit uses the loader valve to control the remote. Let me know when you're ready, and I'll have it shipped the next day. Your tractor has quick-couplers, so you'll want the plug & play kit for a quick install. www.tractorinnovations.com/mahindra
I build all the kits to order, but I can usually get it on the UPS truck the next day. Give me a call or order on the website. www.tractorinnovations.com/mahindra
Yes, I build a kit specifically for the Emax tractors. You have a loader valve sitting out by itself, and I build a bracket to mount the valve with no drilling. Email me for pics. tractorinnovations@gmail.com
This works great to run a grapple, and is an easy install on a 4550. You hav e a flat shield over the loader valve that is really handy for mounting this switching valve.
Yes, this works great on the 1626, and I know that tractor well. you can put in your order on the website. My lead time is just a couple days, and I'll have it on the UPS truck. www.tractorinnovations.com
Yes, I've done quite a few Massey's. I'll just need a couple pictures of your couplers to verify which style and size they are. I keep all the parts in stock, so I build to order and can usually ship the next day.
Just ordered my kit, can't wait you install it and put it to work.
Just installed one on my 4530 to run my grapple was a rather easy install. I installed on the lift function seemed like the more natural position. My tractor is a 06 model and felt this was the best unit for me to avoid any electrical problems.I ran my hoses on top of the loader arm since i have a muffler that is close to the arm. Mounted the control valve next to the loader control for easy excess. Andrew was very prompt in answering a question I had about my purchase and my kit arrived in a few days. Very Pleased with my purchase. Charles H. / central Va.
i just installed the kit on my BX23s. Works perfect, I didn't like the way the valve bolted to the curviture of the instrument panel, but by adding a short piece of 1/4 inch pipe on the top bolt cut on a slight angle and a longer bolt, it straightend the valve up and made a much more professional job. Thanks Andy
Great video Thanks I will be buying the kit Thanks !!
could you potentially run all 4 houses on the diverter? I want 1 to control the top assembly and 1 to replace the lift arm/leveling assembly on 1 side. For box blade work.
Yes, check out this video of a 2-valve diverter system:
ua-cam.com/video/NPBprRph2qw/v-deo.html
How does this work with a grapple? I would need the lift and tilt functions to operate as well as the clamp functions of the grapple. Would this kit work for that application?
It works great. Here’s a video cued up to demo a grapple.
ua-cam.com/video/k9MPGeEW9RM/v-deo.html
i traded in my 4540 mahindra for a new 5145, can you make a kit for this tractor for the same price? and do i need to call you with all the hose lengths.
Absolutely! Yeah, to be sure of the fittings, I'll want you to send me a couple pictures, and we'll be off to the races. Same price - a little different hose length or a changed fitting all comes out about the same to me. 541-972-0546
Does this work with a quick connect plate like on the mahindra 1120?
I an now ready to build for your tractor. Give me a shout. My email and phone number are on the website. www.tractorinnovations.com
I have a mahindra 26max with my bucket controller on the lift arm. Need remote for rear attachment. Where can I mount it! Do you make one for that
Yes, I build for the Mahindra Max series. Is it a Max XL or Max XLT? This mount differently, but I can build either one. Send me an email or text (located on my website) and I'll send you pictures of the mounting.
www.tractorinnovations.com
I have a 2014 Mahindra 4025 2wd and I would like to add a 3rd function valve to run a grapple. Are you ale to build that kit?
Yes, this works great on a 4025. You can run this kit off of one of your loader circuits or off of the 3rd function. Your choice. The switching valve mounts neatly on top of the flat shield over your loader valve. Simple install.
I have a Mahindra 3016 like in the video. I already have an additional remote on the front for my grapple bucket but I’m wanting one for the rear. Any thoughts on how to do this?
Yes - it'll work great. You have the choice of diverting fluid from the 3rd function or the loader circuit. You can choose how you want it setup. If you rarely use the grapple at the same time as whatever you want hooked to the remote, that's a great option. Or you can have it hooked to one of the loader functions.
Here's a link to purchase directly. I'm still working to get my website updated for the Mahindra.
www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=A3XMP9GPG5FX8
Or give me a ring with any other questions or to order. Andy 541-972-0546
@@TractorInnovations hello Andy. Im an Andy too. Is that 541 area code Oregon? I have a mahindra emax 25. I'd like to get to get a kit like this.
Good Morning, I have a 2016 Mahindra 4540 4wd with front loader. Can you make a kit for 4 rear remotes?
Yes, I've recently done that exact install with two complete kits (giving you 4 ports), and it went really well. I can send you pictures. Send an email tractorinnovations@gmail.com
I can knock $50 off the second kit.
So if I need two remotes , TNT for example, I would get two of those plunger valves , and I would disable two functions on the FEL?
Yes, that's exactly right. With two kits, it's pretty cool, you control both remotes from the one control lever. I give a discount of $50 off the second kit. Give me a call or check out my website to order.
www.tractorinnovations.com
Have you ever installed one of these on a Mahindra 15 series? I have a 2615. I thought on my tractor you would likely tie into the hydraulic block under the right side. My application would be to run a top and tilt.
Yes, I've built kits for 2615 and 2815 tractors. One kit provides one circuit - two ports. If you need two circuits, I help customers with double kits all the time. I can knock $50 off the second kit. Give me a call.
541-972-0546
What is your price for the 1626hst mahindra value kit
$595 out the door. All the Mahindra kits I build have the quick couplers on them.
How do I add hydraulics on the back of a Massey Ferguson 1528 to run a hydraulic 3 pt backhoe?
Hi Reid, I’ve built kits for lots of similar tractors. I just need pictures of the loader valve and quick couplers, and I can get it going for you. 541-972-0546 or tractorinnovations@gmail.com
$550 out the door.
I HAVE A MAHINDRA 2638 WITH A THIRD FUNCTION VALVE TO RUN MY GRAPPLE. DO YOU HAVE A KIT TO DIVERT THE FLUID FROM MY THIRD FUNCTION VALVE TO THE REAR? i WANT TO RUN A HYDRAULIC TOP LINK.
Yes, this kit works great coupled with a 3rd function. Knob in, it controls the grapple, knob out, control your top link. Easy install. I can ship the next day usually. I sell hydraulic top links as well in a few sizes. www.tractorinnovations.com
@@TractorInnovations I’m in the middle of moving to my pine plantation. Once I get settled I will order one. Thanks!
Can I install a tee ( 2545 ) fittings at the back ( where the lines go in and out at the back ) to hook up hydraulic for a 3pt backhoe.
Tee’s in hydraulics are tricky. Give me a call to discuss. 541-972-0546
Haw do I contact you about getting a set up for a mahendra E350-DI
Give me a call 541-972-0546
Your tractor needs to have a loader for this diverter kit to work.
I have a Mahindra 1626 with a backhoe. Would this kit work with my tractor? Would I need this whole kit or could I maybe use the hydraulic ports from the backhoe and order a smaller kit?
This kit will work well for you, and won't touch the backhoe hydraulics. The backhoe system received flow, but doesn't have a valve to control the remote function. This kit uses the loader valve to control the remote. Let me know when you're ready, and I'll have it shipped the next day. Your tractor has quick-couplers, so you'll want the plug & play kit for a quick install.
www.tractorinnovations.com/mahindra
I'm thinking this may be the best option for my 2021 1635 Mahindra. I assume there is a pre made kit for it?
I build all the kits to order, but I can usually get it on the UPS truck the next day. Give me a call or order on the website. www.tractorinnovations.com/mahindra
Anything specific for Mahindra Emax20?
Yes, I build a kit specifically for the Emax tractors. You have a loader valve sitting out by itself, and I build a bracket to mount the valve with no drilling. Email me for pics. tractorinnovations@gmail.com
I have a 2022 4550 mahindra and would like a kit to run a grapple.
This works great to run a grapple, and is an easy install on a 4550. You hav e a flat shield over the loader valve that is really handy for mounting this switching valve.
I have a 2638 Mahindra loader . What do you have for my unit ?
This kit works great on a 2638. It will mount on the metal firewall between the dash and hood.
Do you make a 3rd function kit for Mahindra 1626?
Yes, this works great on the 1626, and I know that tractor well. you can put in your order on the website. My lead time is just a couple days, and I'll have it on the UPS truck.
www.tractorinnovations.com
Looking for 3rd valve kit for mahindra 2655
I have them available. my contact info is on my website.
www.tractorinnovations.com/mahindra
What about a Massey Ferguson 2604H?
Yes, I've done quite a few Massey's. I'll just need a couple pictures of your couplers to verify which style and size they are. I keep all the parts in stock, so I build to order and can usually ship the next day.
Is this what I need to
Run a backhoe?
Mahindra 26max
This kit can run a backhoe, but its not the most elegant. You would need to bungee-cord the loader control into position.
@@TractorInnovations ok thanks
How much for Mahindra 1626?
That tractor has quick couplers, so you'll want the plug & play kit for $595 out the door.
Will this connection work on the 4540?
Yes, we've installed several on that exact model. Call or check out the website to order.
www.tractorinnovations.com/mahindra
541-972-0546