The first coat looked good alone but the copper is one of my favorite powders out right now!! Those wheels are bad ass also the way the spokes go all the way to the edge like that, Another one of my favorite things wheel companies are doing is that look with the spokes.
My local powder coater in Perth can't even produce a realistic looking silver finish which ended up looking grey and you guys are producing perfection!
Keep in mind that chrome didn't have a clear coat you lose alot of the shine of chrome one you clear it. In my opinion chrome is for base color for translucent transparent or candy color
I positively _loved_ what came out @02:12!!! (and the choice of music was literally 'fitting' the diff. procedures!👍) My 19'' Vertini Dynasty rims is just delivered for Diamond Cutting, I wish I could have them chromed!!! . . . . . . Great docu BSP!⭐️⭐️⭐️⭐️⭐️⭐️
Those wheels looked brilliant! However, I have to agree with a lot of the negative comments on the music. Maybe something a bit more demographically neutral.
some people say to set your gun so that you don't put a thick layer of powder coat cuz you might ruin them but that doesn't seem to be a problem for this guy & they came out awesome i suppose it will melt in the heat to a thin layer anyways
Hey man so I seen you use the super chrome as a base coat and then top coat with translucent copper while still hot, it came out good, but did you hit these with a clearcoat at the end or no? Just wondering how they’ll hold up without a clearcoat I have a few customers that want some rims done but am researching a little before taking that job on.
Hi there , so we can restore our Rims ? What if i want them to be Anti Rusted with Alloyed materials ? How much they would cost to restore them with Anti Rust alloyed Aluminium ?
Having hard time finding info on Kv and uA. I’m getting a gun with them both but I can find a detailed video explaining them both. Can you give any info
What I don't understand is, when you shoot it hot with all four wheels out of the oven, won't the last two or three wheels be too cool to shoot hot? Or do you have heating lamps? Is the clear acrylic?
So you apply the super chrome base coat then go straight to the top coat after ? Do you apply any clear coat after the base? I am planning to do this but using transparent gold instead
Cool video, thanks. It looks like you shot the translucent copper topcoat over the super chrome while the wheel was still hot? Do you get a better finish doing it this way as opposed to letting the superchrome cool before applying the topcoat?
Can u give me Prismacoat company contact i am in same job powder coating to apply super chrome on other decoration What that materials u applied before coating is it base coat. How to do it
I thought powder paint was flammable. Some blogs suggest using an electric oven for curing powder coatings, but I see some fire inside your oven, is this safe? just curious
You said the customer wanted it with an inconsistent shade!?!? Aka, wrongly applied? I wish my customers didn't care about pounding a candy on over a hot part and making it 10 shades darker on the faces and way lighter in the faraday spots.
Approximately how much weight does powder coating add to wheels? I’m asking because my aftermarket wheels are 10lbs lighter per wheel than the factory wheels...
, if no clear coat yes it does tend to tarnish after awhile , if its clear coated , no i havnt had problems, also check with prismatic powders which cleaner they recommend for chrome
Hello, I’m from Argentina and I’d would like to know if is possible import this powder or if you have a representative or distributor here so I can buy it.
Those wheels aren’t fully cured. At 15 minutes they only had enough time to maybe get to the temperature the powder cures at, then they need to stay at that temperature(usually 336-400) for 10-30 minutes depending on the temp. A data paq needs to be ran to know the temperature curves of the parts and also need to read the data sheet from prismatic who makes that powder to see exactly what the cure parameters are. Been doing this for 17 years. That powder is gonna fail prematurely. Period. Otherwise great looking wheels just need more oven time.
That was my thought as well. When he put the super chrome in for 15 minutes, I thought he was doing a partial cure on it. But then he put the copper in for 15 minutes too. Had me confused. Lol
hi craig, i powdercoated chrome wheels that were new as a test a few years back and the powder is still in great condition . other results may differ though regards andy
Someone help me understand why you would powdercoat the outside of the wheel barrel where A TIRE will always be mounted when these are installed on a car lol?
@@АртурГалиуллин-х2й его нельзя назвать хорошим. Он сильно шагренит (присмотритесь на готовое изделие под copper) и очень дорогой. Из какого Вы города?
The first coat looked good alone but the copper is one of my favorite powders out right now!! Those wheels are bad ass also the way the spokes go all the way to the edge like that, Another one of my favorite things wheel companies are doing is that look with the spokes.
My local powder coater in Perth can't even produce a realistic looking silver finish which ended up looking grey and you guys are producing perfection!
Keep in mind that chrome didn't have a clear coat you lose alot of the shine of chrome one you clear it. In my opinion chrome is for base color for translucent transparent or candy color
Oh damn don't say that bro I'm in Perth and would love this color haha
I'm not gonna mention the music like everyone else, damn, I did, holy smoke batman the wheels look fantastic, I'd love them on my roller skates
Great looking wheels, The wheels are a hell of a lot better than the ratty as$ so called music that ruined the video
ha, ha, thanks william, i guess it would be worse if the music was good and the wheels looked crap...
True BSP but what would be even better is if there was decent music or no music at all and good looking wheels, why not have it all good.
@@bspblastspraypowdercoat4419. Do you sell powder coating machine
Guy from office: hey mind if I throw my chair in there...?
And now I want that chair too 😂😂
I positively _loved_ what came out @02:12!!! (and the choice of music was literally 'fitting' the diff. procedures!👍) My 19'' Vertini Dynasty rims is just delivered for Diamond Cutting, I wish I could have them chromed!!! . . . . . . Great docu BSP!⭐️⭐️⭐️⭐️⭐️⭐️
Those wheels looked brilliant! However, I have to agree with a lot of the negative comments on the music. Maybe something a bit more demographically neutral.
Well came close. Atleast the guy rapping is white..i think..just profiling but im pretty sure with the lack of abilities rapping
Came for the wheels, stayed for the music. No I didn't.
I've been powder coating for 30 years.. They look great! just curious how many mils approx with the copper? Thanks
Powder coating for 30 years?you must get bored shitless after that time
my guess would be 2-3 mils
Hi would love to start powder coating business any suggestion will be appreciated
Do you adjust your KV..i noticed you powdercoated your hooks chrome and usally has a problem with 2nd coat sticking due to the hook?
Love the way theses came out. What kind of powder was use to get the chrome look
That music should be considered a hate crime to have to listen to
press mute
BSP Blast Spray Powdercoat choose better music
Music sucks, painting very cool
Why would a business even want to use a song like this?
Where can I find this dust in Italy? You have an address on the Internet ?
Horrible lousy music.
Nice wheels.
What talentless garbage! Music not the wheels 😂
Just had wheels done in this tone , they came out like Brown ,,,,,going all Red now...touch n go with special colours
Santos Jerez if they came out brown but we’re supposed to be copper the oven was to hot or baked to long.
Very nice! Wish you guys had a shop in az
some people say to set your gun so that you don't put a thick layer of powder coat cuz you might ruin them but that doesn't seem to be a problem for this guy & they came out awesome i suppose it will melt in the heat to a thin layer anyways
Awesome.work👌👌👌 just wondering if the price to is doubled when you use transparent colors?
Why hot flock and not spray cold? Honest question. I have a terrible time getting translucent coppers and golds to turn out like they should. Thanks!
Is there a place like that in Stoke on Trent or near it ,,,
15mins with the chrome that surely wasn't fully cured before top coating interesting you made the worst/hardest color looks perfect over chrome powder
Hey man so I seen you use the super chrome as a base coat and then top coat with translucent copper while still hot, it came out good, but did you hit these with a clearcoat at the end or no? Just wondering how they’ll hold up without a clearcoat I have a few customers that want some rims done but am researching a little before taking that job on.
Gd day at what temp is the gold sprayed on to the chrome coating is it at a full cool temp or is it at a temp just above 50 degrees
Artists at work. Amazing finish 👍
Artists? I wouldn't call a traditional car painter an artist and powdercoating is an easier method...
Hi there , so we can restore our Rims ? What if i want them to be Anti Rusted with
Alloyed materials ?
How much they would cost to restore them with Anti Rust alloyed Aluminium ?
Andrews Powder Coating come check us out! Located in the Chatsworth, CA!!!
I have a set of chrome anteras that have chrome issues and I'd like to strip them an get them powedercosted. Any ideas on where this could be done
Nice work. Not a fan of hot coating. It's hard to keep the mill thickness consistent but you Nailed it. Looks great
thanks , ive actually watched your vids in the past for a few techniques tips, hopefully we can bounce ideas of each other in the future....andy
Cool color! 👍
Having hard time finding info on Kv and uA. I’m getting a gun with them both but I can find a detailed video explaining them both. Can you give any info
What I don't understand is, when you shoot it hot with all four wheels out of the oven, won't the last two or three wheels be too cool to shoot hot? Or do you have heating lamps? Is the clear acrylic?
Damn that gun puts down a lot of powder. I need to look into a fan nozzle for my gun
Did you HottFlock???
Doc
Upland Ca.
So you apply the super chrome base coat then go straight to the top coat after ? Do you apply any clear coat after the base? I am planning to do this but using transparent gold instead
What chrome powder was used for the wheels for base
How much is a job like this usually cost
What paint and code for the copper
I thought chrome is fully cured before top coat?
i just wonder how is paint thickness?
Very nice
Cool video, thanks. It looks like you shot the translucent copper topcoat over the super chrome while the wheel was still hot? Do you get a better finish doing it this way as opposed to letting the superchrome cool before applying the topcoat?
hi , i shoot topcoats hot and cold , this customer in particular wanted darker and lighter tones in finish, thats why i shot it hot
regards
andy
@@bspblastspraypowdercoat4419 so shooting it hot made it lighter or darker
very beautiful
Is Prismatic Powders the supplier of the "super chrome" ? thx
yes
Can u give me Prismacoat company contact i am in same job powder coating to apply super chrome on other decoration
What that materials u applied before coating is it base coat. How to do it
Boa tarde
Também trabalho com esse tipo de pintura no Brasil e tenho interesse em comprar essa cor
raqm albudarah daa kam 'iilaa hadratuk shaghal biha daa alniykal krum law samahtuu wanawe albudrh ayh
Do my wheels have to be chrome for my gold to work
I thought powder paint was flammable. Some blogs suggest using an electric oven for curing powder coatings, but I see some fire inside your oven, is this safe? just curious
How can you avoid shagreens on the surface? you have it by the way
You said the customer wanted it with an inconsistent shade!?!? Aka, wrongly applied? I wish my customers didn't care about pounding a candy on over a hot part and making it 10 shades darker on the faces and way lighter in the faraday spots.
Mike wood YOU COMPLAIN LIKE A HURT WIFE
@Mike wood Exactly. NIC states that they don't recommend hot flocking for just that reason.
@@punmidas1890 all you do is talk about wives go get one and stop bitchin .
Love the music
Approximately how much weight does powder coating add to wheels? I’m asking because my aftermarket wheels are 10lbs lighter per wheel than the factory wheels...
Jeez bro stop counting ounces
How did the wheels turn out? When the vulgar rap started, I was done
That song was awful indeed, but the powder coat came out just okay it’s only copper color not shiny like a penny.
Shut up crybaby 😢
I skipped through it lol
take a clue from eastwood eliminate the crap noise, and gain views,
do you clear coat after the copper cures
Can you do that in gold ?
Do you ever run into the super chrome going dark and unreflective after clearing?
, if no clear coat yes it does tend to tarnish after awhile , if its clear coated , no i havnt had problems, also check with prismatic powders which cleaner they recommend for chrome
Yes, because it is made of so much metallic product it will turn dark if you use products to clean it .
The metallics oxidize at the surface so a clear top coat is a must. Otherwise you wasted time and money.
Those wheels looked very good in chrome. Did not care much for the copper color - my preference.
Hello, I’m from Argentina and I’d would like to know if is possible import this powder or if you have a representative or distributor here so I can buy it.
contact prismaticpowders.com and they should be able to help you out
fucking sick, greatest ive ever seen
how i know what color to get for when i do mine
How do you Powder coat chrome?
which transparent copper is this and brand? I just got mines done but didn't turn out like this
prismatic powders
Those wheels aren’t fully cured. At 15 minutes they only had enough time to maybe get to the temperature the powder cures at, then they need to stay at that temperature(usually 336-400) for 10-30 minutes depending on the temp. A data paq needs to be ran to know the temperature curves of the parts and also need to read the data sheet from prismatic who makes that powder to see exactly what the cure parameters are.
Been doing this for 17 years. That powder is gonna fail prematurely. Period.
Otherwise great looking wheels just need more oven time.
That was my thought as well. When he put the super chrome in for 15 minutes, I thought he was doing a partial cure on it. But then he put the copper in for 15 minutes too. Had me confused. Lol
Yoor from?
I was told powder coating a chrome rim in black may not stay, is that true?
hi craig,
i powdercoated chrome wheels that were new as a test a few years back and the powder is still in great condition . other results may differ though
regards
andy
Surface prep may be necessary for smooth chrome surfaces to get powder to adhire but it isn 't really an issue other than that.
Tell me please who the manufacturer of powder paint chrome?
Www.Prismaticpowders.com
Thank you so much)
BSP Blast Spray Powdercoat
ПСВ антик не знает призматик паудерз? Занятно.
Whts the color code on this powder
hi , do you sell chrome powder?
What was the exact color name
رقم البودره دى كام إلا حضرتك شغال بيها دى النيكل كروم لو سمحتوا ونوع البودره ايه
Looksbwild
رقم البودرة إيه لو سمحت ونوع البودرة
Como consigo essas tintas a pó
Been looking for someone who does this, but not found anyone in yorkshire
Are't those called "WHEELS"??
Добрый день, какой фирмы используется краска
Prismaticpowders
I have used this transparent copper many times it never looks like copper it comes out more like a caramel or a root beer
Someone help me understand why you would powdercoat the outside of the wheel barrel where A TIRE will always be mounted when these are installed on a car lol?
Because it looks better when buying the rim. Only reason
@@wildsidecustoms429 logical enough I suppose
help to corrosion
@@eduardojimenez4340 now that's logical, definitely makes sense!
How you like that gun ??
hi david, it never lets me down
When you shot second count what's the temperature??
1:12 haha ... Almost bit it.
super chrome requires a full cure before top coat.
does that not cause adhesion problems when applying on top of fully cured powder?
Powder coating is chrome??
Jody no , powder coating that looks chrome.
Nice colour
Is that translucent copper ?
transparent copper (prismatic powders)
gdzie kupić taką farbę proszkową ktoś ma namiary
Как краска называется номер ее какой подскажите пожалуйста
Вы не узнали что за цвет? И где купить?Может нашли аналог суперхрома?
У неё нет номера, это одна из разновидностей copper от prismaticpowders.
@@zvezdiuk и где же можно её заказать?? Подскажите пожалуйста. Клиенты всё время просят хороший хром.
@@АртурГалиуллин-х2й его нельзя назвать хорошим. Он сильно шагренит (присмотритесь на готовое изделие под copper) и очень дорогой. Из какого Вы города?
Video was cool, music sucked.
The spokes didn't get a fair shake!!!
This camicel name please tell me iam painter from oman Muscat
U indian?
Where are you guys located
tullamarine , melbourne
Wtf happened at 1:12
why he does not use eye protection and wear only a cheap face mask....
ok, until that stupid music came on. hit the mute...
Steven Paul Walker YOU COMPLAIN. LIKE A DAMAGED WIFE.
Steven Paul Walker was RIGHT! And your wife comment reveals your single digit IQ.
Video was ruined by the song choice.
Holy shit.....thank god for mute.
I hope you didnt pay much more then 200 bucks for that.
Music sucked video was nice
TRANSPARENT my ass
Shooting hot is tricky
Da sind wir aber Moderner Over - gmbh.de
Hello, how are you today? I want the phone number for that country, along with Muftah, who knows a number that tells me, thank you