That’s great I’m glad this video came at the right time...airbrushing cakes is super fun to do I have demonstrated for iwata at a few cake shows and even though car shows are fun the samples you get at a cake show are so much tastier than a sticker lol 😂
Glad you used the Iwata eclipse HP -CS, I have that one, and glad to know I don't need a custom mivro or high dollar airbrush to do these paintings....thanks great video
Thank you for your comment, you can still go super fine with a eclipse just get your mixing and psi ratio right and you’ll be amazed at what it can do...glad you enjoyed the video 👍🏻
Just started air brushing mate, so my opinion isn't really worth much, however, what an extraordinary video ! Thats the best I've seen, if I was wearing a hat Sir, I would take it off to you!!
@@AirbrushAsylum No problem! If I may ask a question, when thinning out acrylic paint for air brush use, when do you use Thinner as opposed to flow medium or improver? Is there a difference?
I was going to say "Not Too Shabby"... but it's one time when shabby is longed for! Your shabby is absolutely stunning. I'm thinking about doing rusty steel plates but in place of the Rivets I would love bolt head's or the shaft of the bolt with rusty washers & nut's including the highlights and shadows. Would it be too difficult for someone just getting into Airbrushing? I've already come up against an obstacle, finding templates for the bolts and bolt heads from above and from the side on view plus the fitting washer's etc! Nothing is never simple but I wouldn't want it any other way. Thank you for your videos I've loved every second... BIG THUMBS UP 👍😷👍
I love your vids! Lots of great instruction, info, and more! I have a few airbrushes and I'm retired and on a really tight budget, so when I spend on my hobbies I have to be very selective. I love my Iwata HP but would like to have a more detail brush. Which would you say is the 'best', the Iwata Micron or the GSI Creos? I know the tool is only as good as the artist (which I will say you are a master) but if I spend 2 - 6 hundred on an airbrush, I want to make sure I get the best I can for me and not have to come back and buy another in 6 months or so. Thanks in advance for your opinion. I know it's hard to point to just one, but which would you buy if you could only buy one? Thanks again. Bill
Nice peace hear also i feel the hole looks more like a orange cloud braking apart to black in the middle but could just be my phone making it look that way but still a beaut sample keep the vids coming
Thank you appreciate the comment and lol, maybe I was in the clouds with my thoughts when airbrushing the hole 😂 glad you enjoyed the vid nonetheless 👍🏻
Hey man, I was hoping you could hook me up with a quick bit of info. I'm gonna try and paint a welding mask for a coworker of mine, using createx paints, what would be the best finish for it? Love the videos man
when you finish all of the artwork seal the mask with a two pack clear you may also need to add some 'flex aid' into the clear if the mask has the potential to flex, hope that helps.
Hello Emily! Didn't hear from her this time. Nice trip to Montana, hope Mabel is OK. And, Dan, I'm sure you were taught to NOT stand in the middle of streets 😊. You all look well, thanks for the visit.
When you do the spidering rust would you direct the air in a gravity direction or just let it free flow . If this wasn’t on a canvass you’d swear this is Amelia Earhart plane panel
Thank you so much , just decide based on what it is you are painting and do some research to see how rust forms in whatever surface it is that you are painting 👍🏻
i think it's better with a type of yellow/orange for lightning rust, for a hole of rust it's usually better (sometime exception ) But guy... my god, my skill airbrush upgrade before i begin practice, thanks so much adn sry for my horrible english haha And i think for umber hole a more skinny line, because the coating is not far, the hole have juste 2/3mm the light can't diffuse
Good lord, five commercials in a seventeen minute video. Nice job UA-cam, you’ve made this worse than watching tv... which was why I switched to UA-cam. Oh, great airbrush work. 🙂
Thank you for the kind words re : the video and artwork ...geez I didn’t think there would be this many ads 😖 I need to take a look thank you for bringing that to my attention 👍🏻
Is that from the from the sinkig ship? One painting back not this one! ... my hands are woŕst. Texting will be all over soon. One Word typing takes.... so many typos and i need start over. 😳 Im so broken...
thank you and yes, you can do everything pretty much freehand, but I always find templates help to make it easier for people who are just starting to learn how to airbrush.
@@AirbrushAsylum , I think why I don't like it is you left the rest of the panel looking too new. I decorate my front yard with a lot of rusty things. Most of it I made. I guess I see things for what they really are. No offense
Learn how to Airbrush more Special Effects : ua-cam.com/play/PLkd3s0ymmV0OVNiwieSDpr8wY52M7Gb0S.html
I’ve watched a LOT of airbrushing videos but this is the most impressive demonstration I’ve seen. Wish I had half of your talent.
That has got to be THE best diorama I've ever seen. My congratulations to all involved, your work is superb. 👍👍👍.
Thank you so much glad you enjoyed the vid 👍🏻🙏🏻
You're more the artist than I'll ever be. I think the white effect in the large spot detracted from it. Nice job! 👍
Great tutorial! Just getting into the airbrush world and this helps greatly.
Glad it helped!
Awsome i airbrushed the rivet panel around a graffiti piece ,this will be the icing on the cake, thankyou Carsten
That’s great I’m glad this video came at the right time...airbrushing cakes is super fun to do I have demonstrated for iwata at a few cake shows and even though car shows are fun the samples you get at a cake show are so much tastier than a sticker lol 😂
You're SO incredibly talented!!!!
Thank you 🙏🏻
@@AirbrushAsylum 🥰
@@AirbrushAsylum you're very welcome.
Just found this page. GREAT work and ideas. I have new ideas to bring into my scale modelling airbrush paint schemes!!! Thanks
That looks sick mate,, I thought those were real rivets at first
you work like a poem. Excellent
Very nice instructions for brushing rust
Glad you used the Iwata eclipse HP -CS, I have that one, and glad to know I don't need a custom mivro or high dollar airbrush to do these paintings....thanks great video
Thank you for your comment, you can still go super fine with a eclipse just get your mixing and psi ratio right and you’ll be amazed at what it can do...glad you enjoyed the video 👍🏻
Amazing work , I’m just starting to practice and this is great
Good video, im going to give this a shot on a project
Muito obrigado amigo! aprendo muito com seus vídeo Deus que te abençoes e continue sempre nos mostrando suas belas artes...Abraço Brasileiro
Impressive as always. This was the best "rust effect" demo I've seen and you make it look so easy! Keep up the awesome work.
Thank you so much glad you enjoyed the vid appreciate the kind words 👍🏻
So realistic that when you placed the template I wondered how you were going to get it to lie flat over the rivets!!!
Just started air brushing mate, so my opinion isn't really worth much, however, what an extraordinary video ! Thats the best I've seen, if I was wearing a hat Sir, I would take it off to you!!
Thank you so much for your kind words really appreciate it 👌🏻
@@AirbrushAsylum No problem! If I may ask a question, when thinning out acrylic paint for air brush use, when do you use Thinner as opposed to flow medium or improver? Is there a difference?
Those scratches especially the deep ones look awesome. Brilliant tutorial mate, nice one Carsten 👍 👌
Thank you so much glad you enjoyed the vid 👍🏻
Stunning!
Thank you! 😊
This was great! Thank you again for an awesome video!
Thank you so much glad you enjoyed it 👍🏻
Very nice brother... Good luck. From indonesia🇮🇩🙏
I was going to say "Not Too Shabby"... but it's one time when shabby is longed for! Your shabby is absolutely stunning. I'm thinking about doing rusty steel plates but in place of the Rivets I would love bolt head's or the shaft of the bolt with rusty washers & nut's including the highlights and shadows. Would it be too difficult for someone just getting into Airbrushing? I've already come up against an obstacle, finding templates for the bolts and bolt heads from above and from the side on view plus the fitting washer's etc! Nothing is never simple but I wouldn't want it any other way. Thank you for your videos I've loved every second... BIG THUMBS UP 👍😷👍
Congratulations man !! Amazing your tecnic and your art !! 👏👏👏👏👏👏👏😎👊
great skills sir
Thank you 🙏🏻
I love your vids! Lots of great instruction, info, and more! I have a few airbrushes and I'm retired and on a really tight budget, so when I spend on my hobbies I have to be very selective. I love my Iwata HP but would like to have a more detail brush. Which would you say is the 'best', the Iwata Micron or the GSI Creos? I know the tool is only as good as the artist (which I will say you are a master) but if I spend 2 - 6 hundred on an airbrush, I want to make sure I get the best I can for me and not have to come back and buy another in 6 months or so. Thanks in advance for your opinion. I know it's hard to point to just one, but which would you buy if you could only buy one? Thanks again. Bill
Awesome work 👏🏾👏🏾👏🏾
Fantastic , very Beautiful
Nice peace hear also i feel the hole looks more like a orange cloud braking apart to black in the middle but could just be my phone making it look that way but still a beaut sample keep the vids coming
Thank you appreciate the comment and lol, maybe I was in the clouds with my thoughts when airbrushing the hole 😂 glad you enjoyed the vid nonetheless 👍🏻
Very nice work. Thx for sharing m8
Obrigado amigo, fiz um teste aqui usando "Laca Nitrocelulose" o efeito ferrugem ficou perfeito, usei também o seu aprendizado para os rebites!
Very Cool, are you self taught or some school thanks for sharing these vids.
Hey man, I was hoping you could hook me up with a quick bit of info. I'm gonna try and paint a welding mask for a coworker of mine, using createx paints, what would be the best finish for it? Love the videos man
when you finish all of the artwork seal the mask with a two pack clear you may also need to add some 'flex aid' into the clear if the mask has the potential to flex, hope that helps.
@@AirbrushAsylum dude, thank you so much for taking the time to respond to my question, can't tell you hiw much I appreciate it brotha!🤙🏼🤙🏼🤙🏼💪🏽💪🏽💪🏽
Good work máster saludos🇲🇽
Thank you so much 👍🏻
How would you go about getting flat areas on the studs where they've been hammered or damaged?
You did such a great job I want to jump in there, sand the crap out of it and prime it!
Wow
Wow. That’s awesome.
Thank you 🙏🏻
Hello Emily! Didn't hear from her this time. Nice trip to Montana, hope Mabel is OK. And, Dan, I'm sure you were taught to NOT stand in the middle of streets 😊.
You all look well, thanks for the visit.
Amazing 😊
My brain: you don't even have an airbrush.
Me: I'll watch it anyway.
When you do the spidering rust would you direct the air in a gravity direction or just let it free flow . If this wasn’t on a canvass you’d swear this is Amelia Earhart plane panel
Thank you so much , just decide based on what it is you are painting and do some research to see how rust forms in whatever surface it is that you are painting 👍🏻
i think it's better with a type of yellow/orange for lightning rust, for a hole of rust it's usually better (sometime exception )
But guy... my god, my skill airbrush upgrade before i begin practice, thanks so much adn sry for my horrible english haha
And i think for umber hole a more skinny line, because the coating is not far, the hole have juste 2/3mm the light can't diffuse
Good job
this
is reaaly fuking amazing!! pretty job!
Super!
👍👍👍👍👍👍👍
Thank you 🙏🏻
Looks great other than I thought the white made it look less realistic.
Muito TOP É MUITO top Vale a pena conferir. 👏👏👏🇧🇷
👊🏻🤘🏻🤘🏻👍🏻
What color are u using for the rust color?
Incrible
Fantastic
Thank you 🙏🏻
Respect
Thank you 🙏🏻
Good lord, five commercials in a seventeen minute video. Nice job UA-cam, you’ve made this worse than watching tv... which was why I switched to UA-cam. Oh, great airbrush work. 🙂
Thank you for the kind words re : the video and artwork ...geez I didn’t think there would be this many ads 😖 I need to take a look thank you for bringing that to my attention 👍🏻
The more commercials he has the more money he makes. That is why he needs to check into it.
I got sick of it and just started paying for premium. Worth every penny!
Bravo!
My old pickup truck has a custom rust job.
What stencil is that that you use. Also, do you have a video of the rivets?!
Look in links, he said his first video of making it was in there
Muy bueno 👍
Muy bueno.!!
Thank you 🙏🏻
Good afternoon. I'm from Russia. I don't know English. You can watch videos with subtitles in Russian
What kind of setup would I need to stat airbrushing?
Compressed, airgun, paint, and LOTS of watching tutor videos like this.
*compressor
Is that from the from the sinkig ship? One painting back not this one! ... my hands are woŕst. Texting will be all over soon. One Word typing takes.... so many typos and i need start over. 😳 Im so broken...
Bro u dont need that template 😂
thank you and yes, you can do everything pretty much freehand, but I always find templates help to make it easier for people who are just starting to learn how to airbrush.
a really impessive overali effect
Looks like lil kid faces from template or im trippin
ha ha ha most likely 😉
👀💯😎💖👍
素の鉄板の絵が不自然で、そこに描いた錆も「錆の絵」には見えるが、「錆」には見えない。エアブラシの限界点か。
Lovely video! I hope you'd enjoy my videos too. Keep up with the fantastic work! 💞💕
Mmmmmm? Not 1 rusty rivet!
+
Hmm. Honestly, I don't like it.
Appreciate the comment and shame you didn’t like the end result but thanks for watching nonetheless 👍🏻
@@AirbrushAsylum , I think why I don't like it is you left the rest of the panel looking too new. I decorate my front yard with a lot of rusty things. Most of it I made. I guess I see things for what they really are. No offense
Nice video but the music is bloody annoying
Fair enough thanks for your feedback 🫡