Making A Wiring Harness From Scratch For My SUPERCHARGED 1UZ Drift Truck

Поділитися
Вставка
  • Опубліковано 22 гру 2024

КОМЕНТАРІ • 94

  • @_Gingium_
    @_Gingium_  10 годин тому +12

    Hope everyone is having a good Holiday week and is ready for the new year! Remember, go to mudwtr.com/gingium to get 15% off your new morning ritual!

    • @gingervikingjesus2351
      @gingervikingjesus2351 3 години тому

      Hey hold on to that factory gauge cluster circuit board, more than likely those lines on it are silver!! Worth a decent amount at your local scrap yard, if you've got a handful of them!! Or you could try to harvest it yourself.. Pick yourself up a small ceramic bowl, some time at a work bench with maybe a razor blade & a blowtorch, you could have yourself a nice little silver button by the time you're done!! Also the chunks of copper wire that you end up disposing of, I really hope you're putting them in a bucket in your shop somewhere, cuz that's worth a good bit at your local scrap yard as well!!😉🥃
      They suggested electrolysis and cementation for the recovery of pure metallic silver. Recovery of silver from synthetic chloride solution is done by solvent extraction and extracted silver successfully with amines employing xylene as diluent.

  • @geopou4618
    @geopou4618 День тому +68

    Crazy to think you've had this car for over 6 years now, And it's never been better than it is right now. Can't say the same about other youtubers cars.

    • @_Gingium_
      @_Gingium_  10 годин тому +22

      And man we have so much more improvements left! Very excited

    • @TheRealK1LL3RCUSSGamingChannel
      @TheRealK1LL3RCUSSGamingChannel 6 годин тому

      Dude is truck not car yes it’s crazy build

    • @hyde_official
      @hyde_official Годину тому

      I was like whtf? comment 1 day ago, how? just to remember it's from remember. anyway, this is sick. man. respect on the wiring and getting it right!

  • @lachiemcdonald7283
    @lachiemcdonald7283 4 години тому +9

    That wiring is so clean. Doing the entire bus and Delica really helped take you to another level.

  • @shiftymiata
    @shiftymiata 9 годин тому +14

    Man, this project (and the mid-engine eclipse RIP) have absolutely blown me away. This is built better than like 95% of SEMA builds, absolutely top notch.

  • @MrLagom
    @MrLagom 7 годин тому +25

    Tank full 30ohm and empty 240ohm. Need to switch it on the gauge 😄

    • @ilbangromero4690
      @ilbangromero4690 3 години тому

      Liking for visibility

    • @CherimoyaFrank
      @CherimoyaFrank 2 години тому

      Same here. Reacting just to give it more attention. 😉

  • @陳品學陳品學
    @陳品學陳品學 9 годин тому +15

    I still remember when you introduced this truck six years ago, I was struggling to get myself into the graduate school I wanted. And now, not only have I got myself a master degree in vehicle engineering, I've even completed my country’s mandatory military service (I'm a Military Police Private!) too, and yet the truck is still here! Time really flies brother!

  • @fabiocarra1997
    @fabiocarra1997 9 годин тому +15

    being an electrician i'm starting to really appreciate a well done car wiring
    and those pdm are the equivalent of House Domotics so it is preatty cool stuff

  • @mrrob516
    @mrrob516 7 годин тому +5

    Best wiring ive seen so far on youtube, so clean and practical.

  • @wakelystephenson7863
    @wakelystephenson7863 8 годин тому +6

    So happy you got the clock to work. Idk why but that make me smile

  • @Notdb1gabe
    @Notdb1gabe 5 годин тому +1

    You and Jimmy oaks have the best built cars on yt imo

  • @MrTomuron
    @MrTomuron 5 годин тому +1

    I remember when you were hot glueing wires together and now you're making entire wiring harness from scratch. My man, you're an inspiration not just for me but for many

  • @evanhajder
    @evanhajder 8 годин тому +3

    Crazy that i've went from watching you put new wheels on fred and playing FM6 to projects like this. Time has been flying.

  • @davekauffman561
    @davekauffman561 8 годин тому +2

    The One gauge looks pretty cool! I love how nicely it mounted and looks in the dash!!

  • @macaboo312
    @macaboo312 4 години тому

    This build is insane! Keep killing it.
    Would be crazy to see you Jimmy O, Spoon, and Bhall get together and drive together!

  • @SkyyMi
    @SkyyMi 2 години тому

    This was so satisfying to watch, huge props for getting the wire knocked out. I hope to one day be able to have something worth doing this level of work to. Can't wait for the spring content

  • @Gas_and_Pedals
    @Gas_and_Pedals 9 годин тому +3

    Finally!! Favorite build on UA-cam 👌

  • @Logan.Senhauser
    @Logan.Senhauser 3 години тому

    So satisfying to see all this wiring and general cleanup. Looks awesome!

  • @Tonimm
    @Tonimm 2 хвилини тому

    Adding AC would be the icing on the cake 😊. Love your builds!

  • @Rivalistics
    @Rivalistics 6 годин тому

    Dude this has to be some of your best work so far holy crap

  • @ContasYT
    @ContasYT 6 годин тому

    love the attention to all the small details

  • @MotorStorm
    @MotorStorm 9 годин тому +5

    Just a word about the automatic translation of the video titles/descriptions :
    Not sure if you've enable that on purpose or if it provides more visibility but I usually try to avoid these kind of videos as the translation is usually garbage and the content is often clickbaity/ai generated garbage. I've been subbed for years so I know what to expect (very good stuff), but i'm not sure it's a good thing for people not knowing the channel.
    Anyways : DRIFT TRUCK FINALLY!

  • @WouterB76
    @WouterB76 6 годин тому

    It's all coming together very nice Caleb!

  • @macaulayholland3516
    @macaulayholland3516 8 годин тому +1

    Sweet ivbeen waitifor this video. Merry Christmas bro 😊

  • @mscd9676
    @mscd9676 9 годин тому

    Ive just been doing my lancias exhaust to the music you used in the rally miata montage and here we go drift truck content
    I started this engine swap because you showed me fabrication is possible with no experience, thanks man

  • @markj.6276
    @markj.6276 5 годин тому

    I think you do a great job of wiring and explaining wiring.

  • @ttinnovations3310
    @ttinnovations3310 6 годин тому

    Truck looks Amazing, one of my Favorite G. Projects!!!

  • @Incaensio
    @Incaensio 3 години тому

    Merry Christmas brother. Much love and respect to you.

  • @senorpickle4207
    @senorpickle4207 5 годин тому

    Because of you I bought a minitruck. It’s my favourite car even tho it’s slow, has no power steering, no AC and no suspension but it’s COOL

  • @parkerbanken1831
    @parkerbanken1831 8 годин тому +1

    Drift truck content>>>

  • @kylee.woyote7237
    @kylee.woyote7237 7 годин тому

    Man this thing has came a long way from angle mods and a handbrake. At the time I had a 720 with cut knuckles and welded diff and well I thought I was Ken Block lol, the drift truck is what started my obsession with your channel.👍🏻

  • @kanebedford567
    @kanebedford567 11 хвилин тому

    Its crazy for me to think your the same guy i watched stickerbomb your focus dash 9 years ago keep up the good work brother

  • @lomeas
    @lomeas 8 годин тому

    this is what we are here for! great vid man!

  • @jmore8128
    @jmore8128 9 годин тому

    CANT WAIT FOR THIS TRUCK TO BE FINISHED 🔥🔥🔥

  • @vedrankoturic4998
    @vedrankoturic4998 4 години тому

    Amazing work, just as always. Keep it up bro, wish you a happy christmas and a ton of these builds next year :)

  • @IAmBlux
    @IAmBlux День тому

    Love to see the progress! Can't wait to see it driving again and back on the track.

  • @NFSFan0011
    @NFSFan0011 9 годин тому +1

    Have a Merry Christmas, Gingium! Thank you for these inspiring videos you make :)

    • @_Gingium_
      @_Gingium_  9 годин тому +2

      Thank you! Happy Holidays!

  • @jenniferburr9791
    @jenniferburr9791 2 години тому

    You are super talented! Love your channel.

  • @Drunken_Hamster
    @Drunken_Hamster 2 години тому

    You can look into wiring some kind of resistor and capacitor combo on that fuel bobber in order to make the resistance curve appear more linear to the gauge cluster.

  • @LifeInJambles
    @LifeInJambles День тому +2

    Sheeeeeesh. Whatta banger.

    • @_Gingium_
      @_Gingium_  10 годин тому +1

      Appreciate it 🙏

  • @boosted242
    @boosted242 7 годин тому

    Twin exhaust lolzer. Great work!

  • @bigred913
    @bigred913 4 години тому

    crazy you posted this as im about to completely rewire my 91 first gen cummins

  • @Blurgamer17
    @Blurgamer17 9 годин тому +1

    6:40
    The disc brake really puts a _stop_ to the aluminums movement, huh? 😅

  • @PDXMX83
    @PDXMX83 3 години тому

    Ahhhhhh back from the dead!!!

  • @Timothystrunk-h9s
    @Timothystrunk-h9s 7 годин тому

    I like the longer videos with the drift truck

  • @curdisdunn5414
    @curdisdunn5414 9 годин тому +1

    Like 12th attemped to get caleb to race my 03 acura cl type s super similar build to his accord down to most brands we'ev installed into the two v6 honda brand cars

  • @BS_kustom
    @BS_kustom 7 годин тому

    Great job, I like that ecu. I think the rear strut suspension is located in a bad position, because it is in a vulnerable position from any blow. If you touch the fence at any of the ends, the position of the rear suspension will be affected, no matter how slight it is

  • @djmyth84
    @djmyth84 9 годин тому

    So lovely to see you use duetch connectors there. Everytime i upgrade something on my car i use it. Even my speakers have it 😂

    • @_Gingium_
      @_Gingium_  9 годин тому +1

      deutsch connectors are the best thing ever

  • @marvinstober6335
    @marvinstober6335 8 годин тому

    I love this truck ...keep up the good work bro ...

  • @matthewautry
    @matthewautry 6 годин тому

    In the process of building up my 1991 LS400, hoping my 1uz(albeit turbo) will be as dope as yours!! Keep it up!!! If you get a moment in a video, you should do a short explanation of the required sensors and basics to get the 1uz engine running. Regardless, thnx bro!!!!

  • @stantheman5163
    @stantheman5163 8 годин тому

    Nicely done.

  • @szorcsokzsolt341
    @szorcsokzsolt341 6 годин тому

    Hi Gingium. I think you changed the Ohms at the One Gauge. Empty Ohm was 242 and full was 32. And when you did the input you set the full Ohm to 242, and the empty to 30.
    Maybe thats te cause of the inaccuracy.
    Btw, the bulid is awesome.
    Happy Holidays 🎉

  • @Timothystrunk-h9s
    @Timothystrunk-h9s 8 годин тому

    I wish I had one of those plasma tables. Instead of buying little parts you can just make them 😂

  • @mahdialsenussi3066
    @mahdialsenussi3066 9 годин тому

    Nice work 👍🏼

  • @mastercricket7626
    @mastercricket7626 8 годин тому

    Damn bro , you killed this for sure .. came out mint af too man , seriously, that looks better than factory for sure and clean ... and i might have to check into that "One Guage" digital dash to bro , thats rad af and i been wamt to convert just aint been sold till now 💪🏽.. keep at it bro and ya be on track for the spring ... peace and love all, keep it rad, stay safe, and build on..l8r famz and keep having fun all

  • @GutZ_47
    @GutZ_47 4 години тому

    youre truck is literally the blueprint to my trucks current build, except using BMW front sub/suspension and running a 2rz turbo instead of a 1uz.

  • @Cole.Van.
    @Cole.Van. 8 годин тому

    Ohm readings for the fuel level sender got flipped 180 in the settings👍

  • @Incaensio
    @Incaensio 3 години тому

    The white tubes was 100% the right decision

  • @J0ECOX
    @J0ECOX 6 годин тому

    This is like a vip drift truck with all these features lol are you planning to add an electric heater for when it rains and fogs the cabin?

  • @Rasigarage
    @Rasigarage 4 години тому

    Good 👍 stuff

  • @MsChristianskogland
    @MsChristianskogland 5 годин тому

    The Milwaukee heat gun you have there ? Is it good?

  • @TheEthanification
    @TheEthanification 5 годин тому

    I think your favourite word is "Done" lol

  • @aircivic87
    @aircivic87 7 годин тому

    How do you like that atoto radio so far? It looks like it booted up pretty fast.. also I would really love to see some car audio focused stuff. Even if it's a cpl short videos or clips. Thank you for sharing with us. I look forward to your ingenuity on your videos. 🍺😁

  • @cristianoespa1249
    @cristianoespa1249 8 годин тому

    good as usual! and as for the Volvo, what happened to it? A hug from Italy ❤

  • @noiiaz96
    @noiiaz96 7 годин тому

    Is there a reason to have to manually activate water pump, intercooler, etc. rather than just have the ECU do it?

  • @marvinstober6335
    @marvinstober6335 7 годин тому

    Cait wait for next video

  • @epp9122
    @epp9122 5 годин тому

    Put the battery in a box in case of it blowing up:)

  • @blakeerdmann
    @blakeerdmann 3 години тому

    Hey, How can I contact you about an engine swap in my 63 bug? I think I'm like 30- 40 min from your shop.

  • @mikemarchand4227
    @mikemarchand4227 6 годин тому

    What kind of truck is that? What is the original model?

  • @devirkesici7096
    @devirkesici7096 9 годин тому +3

    Sorry to say but when you are harnessed up in the car you may NOT reach the kill switch.

    • @davekauffman561
      @davekauffman561 8 годин тому +1

      Yeah, that placement seemed poor to me... That's an emergency type switch, definitely not an 'emergency' location!

  • @limesta
    @limesta 7 годин тому

    HIDING GINGIUM IS BACK FUCK YEAH

  • @tatedayley5435
    @tatedayley5435 4 години тому

    I might be wrong but it looked like you switched the ohms full and ohms empty when you set up the fuel level gauge

  • @CamiM305
    @CamiM305 9 годин тому

    Would it be wrong to buy the pdm just for the key pad 💀

  • @thatguy8oh8
    @thatguy8oh8 9 годин тому

    Finally

  • @dripperformanceandlighting5459
    @dripperformanceandlighting5459 7 годин тому

    I thought the starter fuse was supposed to be a 30amp

  • @RollingRoadEFI
    @RollingRoadEFI 9 годин тому

    Skrrrt.

  • @preludedude4765
    @preludedude4765 9 годин тому +1

    This is super cool and very well donr but personally, I'd have added a stalk just for turn signals. It would be annoying to reach over to the key pad just to signal.

  • @jdmnic1
    @jdmnic1 34 хвилини тому

    I feel like I’ve seen this video before. 🤔

  • @Barizolla
    @Barizolla 5 годин тому

    How can i be as cool as you ❤

  • @davefury66
    @davefury66 8 годин тому

    😎👍🏻😖😲😏🔥💯✌🏻🍻

  • @wills_hemp
    @wills_hemp 3 години тому +1

    Por favor para de começar o video falando, isso é chato e sem nexo, põe qualquer coisa mas não começa o vídeo falando!

  • @joshmorgan7639
    @joshmorgan7639 4 години тому

    Okey hear me out. V8 swap molly

  • @thatguy8oh8
    @thatguy8oh8 9 годин тому

    Finally

  • @thatguy8oh8
    @thatguy8oh8 9 годин тому

    Finally