Here is a link to the"Pylex" adjustable deck supports: www.amazon.ca/Pylex-12098-Support-Extendable-Black/dp/B0753NYS3R/ref=sr_1_8?crid=361U3H4OH2N5F&keywords=pylex+post+base&qid=1584890716&sprefix=pyrex%2Caps%2C178&sr=8-8
Look like part number 12103 and not 12098? Yours didn’t have the bolts to adjust width? Couldn’t you fill the tube with epoxy in areas where wind is a concern. I know you loose adjustability. The company would be smart to thread the base then use the nut to lock into to position creating an actual connection to the ground. Nice idea but don’t know how it meets code
Three important mistakes: 1. The flashing where it meets up at the butt joint on the ledger needs to be caulked. Water will penetrate at the butt joint and eventually rot out. 2. He tore the tar paper near the downspout. That should have been repaired. 3 Finally and most critically, the concrete patio is probably no more than than 3-1/2 “ thick. My jurisdiction would have required the patio cut out and a footing installed.
With all the videos I have watched for building a deck, you are probably the only one that actually mentions treating the cut ends on every piece of wood. Thank you for this!
I’m actually glad to see you kept in the mistake and had to redo it. It’s good to see somebody on UA-cam not edit that out. Shows even a pro makes mistakes. Softens the blow for the diyer
I love how you showed yourself making a mistake (45:30)!This is very important for us “do it yourselfers”. This is definitely a confidence builder. Thank you! Your videos are extremely informative. The best I’ve seen yet.
I'm only 34 minutes in and usually I rip through these to catch the broad strokes... I've watched every minute of what this guy has presented. Excellent and comprehensive video, easy to follow and thoroughly illustrated. Thank you for taking the time to share your craft Sir!
Made it to the end. Very thorough video. My Dad was a carpenter; I am an electrician. lol. I wish I'd have paid more attention to my Dad's craftsmanship back when he was alive. But thank you for your instructive videos; they really helped me hone up on some forgotten knowledge I had. I have a new house that I will be installing a 10' x 20' deck on with a handicap ramp for my mother-in-law and brother-in-law. Thank you and God bless.
This is one of the best renovation channels out there. I'm about to build a 30'x8' deck for a customer. Videos like this one here are a gold mine! From Norway, thanks a ton Shannon! You are appreciated man!
This video series (see all 3) is THE authoritative source of expert information that made my deck build possible!!! There is so much noise and misinformation on UA-cam, half-baked, and downright dangerous "expert" advice on deck building techniques. Shannon's is the real deal. Of course, you will have to supplement with other videos to adapt to your own deck building situation, but these 3 videos from Shannon have all the core knowledge you need to DIY, even if you are a complete novice like I was.
Thank you Shannon...we have been considering a deck for about 20 years...I have received some pricey quotes over the years and you finally gave me the confidence to complete one myself...my wife wanted it big...turned out to be 24 x 16....took me several months working alone but it was well worth it! Cheers.
Glad to see you make mistakes. Teaches us all that even the best can goof up sometimes and to pay attention to detail. Appreciate the authenticity. Keep it up.
I know this is 5 years ago but I need to tell you that your video is one of the clearest and concise videos about decking, and i've watched a lot! Nice to see a few wee mistakes too - I think that stuff only happens to me! 😆 Many, many thanx for your marvelous video.
Wow! As a teacher with little carpentry talent, you explain things SO WELL. You are very clear and easy to understand. You give a guy like me great confidence to tackle anything. Thanks so much.
Every time you film a video and you think damn this is taking a long time...remember how much time you're saving every viewer by not making mistakes and being able to plan properly.
This is an excellent and very educational video. Most project/construction/DIY videos leave out the details and just skip to the major steps, but the details are the most important things to know! Looking forward to watching the rest of this series.
I found your video and used it to extend my deck by 5 feet. Can’t tell you how much I appreciate your video. You’ve saved me thousands of dollars in learning how to do it myself. So thankful.
You do a great job at teaching Shannon. I've built my share of decks but I'm watching your video anyway looking for any new info/materials, and tricks. GREAT job madman. Regular guy doing solid work, hats off to ya!
I'm not a pro, and I can tell most of the home renovation channels and handy men do stuff thier way and it Is sometimes wrong, I've seen crappy solder joints, lazy work arounds, bad sheet rock mudding, yet every single video on this channel is gold. I don't watch tv, I watch construction, home renovation,, and other videos for entertainment, and this man literally is the most effective teacher and tells you every thing you need to know and how to do it right, and I have never seen him do a bad job. I've done alot of these projects my whole life and watching him made me realize all the small mistakes I made in my life. I appreciate all your videos and hard work that goes into them.
Shannon your awesome I watch a lot of your videos. I recently purchased my first home, and do all the work myself with the help of your videos. Im interested in redoing my deck so these videos are key.
***** Thanks Alex! Glad to be of help. Please feel free to use our forum as a helpful DIY tool as well. Please spread the word of our helpful information. www.house-improvements.com/forums/
Few people are willing to show mistakes. The fact that Shannon doesn't cut the video to hide the mistakes shows you the real deal. All of us make mistakes. Great video! Thank you for taking the time to share your experience with the rest of us.
You take all the extra care that separates quality workmanship from average. And I appreciate all the details and tips that you remember to mention. A lot of instructionals take for granted that everyone knows these things. Great work and awesome video! Thank you!
One of the best Home Improvement channels out there. Well explained as you go along step by step, in terms all can understand and discusses the simple issues you may come across as you attempt the same project. Nice one Shannon.
This is a great series. You're great at presenting this information, reasoning and demonstration. My first deck project (24x36) is a bit more than I could chew. Attended more "UA-cam University" and am learning more amd more. End result, I over killed some areas. Thank you for showing this, Shannon. You and the Crew rock at this information.
I built a cantilever deck like yours 17 years ago. Mine was 2x10” ....16’ long x 48’ wide (780sqft). The beam holding the deck was 2...2x10” with a 1/2” pressure treated plywood filler (required by code). This sits on 13....10”x48” deep concrete piles, even with the ground. The deck is about 16” above the piles. The framing is all green wood. The beam sits on the piles. The top is white cedar. I’m in the Chicago area. This year I will be repairing and replacing some of the white cedar boards. I have added 3 electrical outlets in metal conduit and a 1/2 black iron natural gas pipe with shut offs with 2 outlets for my natural gas grill. We have enjoyed this deck, & grill, even in the snowy winters. Thanks...Jim PS.....I know you used screws with the hangers, but nailed the rafters on the other end, this seemed strange that you didn’t screw the rafters in? I used double hangers and Tico nails (just the way it was done then). I did use a similar flashing, but finished aluminum, under the siding but on top of the deck. The outside face of the deck was covered with a 2x12” green. I also used a cedar skirt all around the deck to the rock that was under the deck (required by code). Two stairs were used, one in the middle and one on the open end with a railing. Seating was on 1/2 of the deck and is usable sitting in or facing out. The grill is centered on the outside of the deck across from the sliding glass doors of the kitchen/dinette. This was my second deck I built, the other was similar to yours, 16’ x 16’ 3” also cantilever, all green. It is 24 years old, and has never been repaired.
I am so happy that I found your video, I am just getting ready to build a deck on my mom's house and there is so much concise information here. I've watched the videos a few times, I know I can come back if I need to refer to it again. I can't tell you how great it is to feel a little more comfortable about tackling this job. Thank you.
I like everything you do except for the lack of pre-drilling. I feel, in a situation such as this, even though a manufacturer may say it's not necessary, the importance of mitigating stress within the board outweighs the convenience and speed of driving them straight in with no pilot hole, especially in drier dimensional lumber. As you're well aware, lumber loses much of it's strength as soon as it develops a crack or split. As for the flashing, perhaps a bead of construction adhesive on the top edge of the ledger board would be effective to hold the flashing in place so the main sections don't move and the splice doesn't slide laterally from its location. Great job with your explanations; I really appreciate your ability to convey key information to the layman - a true teacher.
Agreed! What's with tradies and their antagonism towards pilot holes and pre-drilling? There are VERY SOUND Engineering principles to warrant drilling, so that the damn things last a whole lot longer ... wait ... there's a clue, right there. Hmmmm.
These contractor is a real Professional,he breaks things down throughly everybody is different as long as your going by code, and he those Lol he's name should be Code lol,that's how good he is
Awesome instructor. Its great that you never fail to mention all the little tricks of the trade that come with experience. Great videos! please continue, always learning something new from you.
what do you mean "hope you" stayed until the end.... Couldn't take my eye off the screen.... I really do like your videos and use the Knowledge you share regularly.... thanks for all you do....
When he said that I was like. I stayed ....lol ... his glasses tho. When he forgot to put them on I was waiting or the camera guy to whisper " your glasses".
People who don't make mistakes....are people that don't do anything. Nice shirt, nice hat. Nobody thought the video was too long. But some of us thought it was too short. Take your time. Your content is well worth even twice the length.
*Before you hammer your wedge bolts into the concrete!* Put them through the bracket and add the nuts so they don't fall off and *THEN* put them into the holes and hammer them into place. You won't have to bother with popping them sideways to fit by doing this. ❤🇺🇸🦅🔥
Time flies... Great teaching video. I too appreciate the honesty exhibited. Shows that everyone makes mistakes but if you want a good end product, correct the mistakes and move on.... Much appreciated!
Very good videos. Nice , clean, conscientious work. Glad to see that you noticed small "mistakes" before they turned into big mistakes. We've all made them but when you correct them they are no longer mistakes! Thanks.
Hate to be one of those people but those joist hangers are designed to have longer screws/nails in the 4 diagonal holes. That is so the screw/nail penetrates the joist as well as the framing member the joist is being hung on, in this case the ledger board.
Do any of you have any manufacturing spec to share Where I am we have joist hanger nails. (Heavy duty galvanized. But short) They have a number on back 10 for 2x10. 8 for 2x8 and so on. I'm sure you all know what I'm talking about. But if you don't have the right number and one in every whole Will not pass inspection! They don't accept any other fastener!
Hey Shannon, just wanting to say that your videos are #1. I have watched many videos that are construction videos and yours are very clear, detailed and professional. A lot of people say okay now do this but they don't actually explain WHY you're doing this and for what purpose. They don't even explain what screws to use. Your videos gave me a much much clearer picture of how to build decks. I think what I admire mostly is the way that your work area is mostly clean and not trashy. A lot of contractors have materials everywhere and are not so organized. Not to say construction is clean work but you can make it a lot more efficient as far as being organized and having your work station clear/clean. Thanks for making these videos I will be looking forward to seeing more videos from you. Thanks for the videos keep it up!
Thank you Merfin, we do strive to create the best DIY videos on UA-cam and as many people like yourself have pointed out I think we are getting pretty darn close with most of ours! I have always said you can not show most people how to do anything properly in a 2 min video and that is why ours are longer than most, but we stand by our productions and spend a lot of time behind the scenes prepping and preparing. We do however still mis some details but way less than most. Thanks for the comments and please share our channel with everyone that you know!
I like that you don't edit out your mistakes. Chances are we will make the same mistakes when building our projects and we were able to see how you corrected them. BTW...what do you take to go in "Speedy Gonzales" mode? I'd like some of that too :)
Did I miss some essential ingredient in snapping a stringline before he cut the joists to length?? The stringline was straight but how did he know it was parallel to the other end of the joists. Theoretically, you could snap a stringline that would be straight but the deck could end up a triangle.
Would this be a good time to consider adding electric power. When I did my last deck I didn't run power and regretted it later. If you know you will be using outdoor lighting, or other electric you may want to consider rough wiring at this point.
I changed from the FM Lags to the Simpson SDWS -no predrill, smooth flat washered head that don’t limit where I place my joists. Check em out. Cool vid 😎
+Randy Bobandy That would be around 70 degrees in F which is just about the perfect weather. I live in the southeastern part of the US where you never know what kind of weather to expect. It was nearly 70 in late December this past year and 13 inches of snow on the ground a month later.
A minor correction. Those aren't lag bolts. They're lag screws. I mention this because if you ask for lag bolts at your home supply you'll end up with the wrong fasteners and they will probably ask you if you want nuts for the bolts.
Shannon, everyone is always commenting on how great your work is, and I won't argue with them. however, I never see any comments on how well of a job your camera-man does. so, please relay the message! he does an excellent job of keeping up on camera shots while also lending a hand when needed
Love your videos. Here in Illinois we get several inches of snow so we usually build the deck down the height of a normal step( about 6 3/4 inches. I do this because I have yet to find a fool proof way to keep snow from weeping under the door. Flashings doesn’t work under the door sill. Do you have any ideas. Thank you. Your work is excellent.
Great video! One thing, joist hangers need longer screws or nails in the angled holes! 2-1/2" minimum according to Simpson strong tie! Most common mistake everywhere! Almost all pros make this mistake!
I always admire all of good constructors. They worked hard outside, they were really strong, and logical smart. Just if they are more detail and more accurate and more strong foundation. I think all of them can become a Pyramid builders. Bravoooooo........I love seeing all u guys projects. 1000Like
Thank you so much for the video and wanted to complement you on being thorough and succinct. Definitely a great start for learning how to build not only a deck, but attaching it to the house and eventually setting the posts.
i agree with everyone. i love watching your videos. the little details you add makes it so helpful. the fact that you mentioned to cut the flashing in a V for the nails that may get in the way was very nice. glad we live in the same city.
HouseImprovements just finished watching the video. that was a long one but very informative. i think i recall you mentioning it once on one of your videos or maybe i read it on your facebook page or website. you're based in the vancouver area right? my bad if i'm wrong :D.
Shannon, you’re very thorough in your explanation - you’d be a great teacher. I have one observation: This family paid probably $6,000 to have a beautifully-poured concrete patio; why would they ever want to pay another several-thousand dollars to install a deck on top of it? Doesn’t make sense. They could’ve simply made a beautiful wide, decorative wood stairway up to the patio door, with a five-foot landing. Seems to me they wasted their money on the concrete patio. They could’ve simply installed a plastic membrane over the dirt, and installed landscaping rock on top of the plastic membrane in order to have a surface under the wooden deck that would quickly dry after a rain storm.
People do what people do. Actually they were having a slight water issue here and wanted to be sure water was directing away I guess. I did not do pad but it sure made a nice clean install for me! LOL.
I was simply watching this for my entertainment.i greatly enjoy the technique you used to put that together and there are some very smart methods thrown into it. Great work man!
Very thorough! I was not able to find a video on how to install a deck on a concrete slab at least a foot high and this hit it right on the nail, no pun intended. Thank you!
Shannon - Thanks for sharing your knowledge! I like how you explain. I am putting a composite deck after a major home addition project. Learnt a lot from you friend. Best wishes!
I am going to build this summer. The walking surface is 16 inches above the ground. I am going to build a 18 x 24. I will pour 42 inch footings in sonotubes. Ground slopes. Will extend footings up to rim joists and insert a 4x4 bracket holder into the wet concrete to be used to hold the 2x10 rim joists and center beam supports. No 4x4s or 6x6s. Joist hangers will support all joists. 2x8s with 8-10 spans. Really learned a lot from your video series.
![How To Build A Deck | #3 Decking [Posts/Border/Decking]](http://i.ytimg.com/vi/kxRoTOyjfug/mqdefault.jpg)
![How To Build A Deck | #3 Decking [Posts/Border/Decking]](/img/tr.png)
Here is a link to the"Pylex" adjustable deck supports: www.amazon.ca/Pylex-12098-Support-Extendable-Black/dp/B0753NYS3R/ref=sr_1_8?crid=361U3H4OH2N5F&keywords=pylex+post+base&qid=1584890716&sprefix=pyrex%2Caps%2C178&sr=8-8
Thank you information and you quick response. But it is not the same as in the video, why?
Look like part number 12103 and not 12098? Yours didn’t have the bolts to adjust width? Couldn’t you fill the tube with epoxy in areas where wind is a concern. I know you loose adjustability. The company would be smart to thread the base then use the nut to lock into to position creating an actual connection to the ground. Nice idea but don’t know how it meets code
From the beam how many inch is the over hang. Thanks
HouseImprovements Would I need an xrtra brace if my deck span is 16 feet? Or can I use 2x10x16 for the floor joist.
¹aq
No fake smile nor drama, simple and efficient, no cut on mistakes and a decent video. get my like and comment you random youtuber.
That's Saskatchewan for ya. Most humble and hardest working people I've ever met.
Three important mistakes: 1. The flashing where it meets up at the butt joint on the ledger needs to be caulked. Water will penetrate at the butt joint and eventually rot out. 2. He tore the tar paper near the downspout. That should have been repaired. 3 Finally and most critically, the concrete patio is probably no more than than 3-1/2 “ thick. My jurisdiction would have required the patio cut out and a footing installed.
@@fifthamendment1 th fact that he hit rebar when drilling leads me to think the concrete is thicer than you are saying
With all the videos I have watched for building a deck, you are probably the only one that actually mentions treating the cut ends on every piece of wood. Thank you for this!
Glad it was helpful!
I’m actually glad to see you kept in the mistake and had to redo it. It’s good to see somebody on UA-cam not edit that out. Shows even a pro makes mistakes. Softens the blow for the diyer
You need to eat tacos!!!
A mild mannered one man machine. I appreciate the no rush pace. You include the one man tricks of the trade. And show your mistakes.... Subscribed...
You sir are the Bob Ross of how to videos.
I'm a builder and i got to say you do a fine job in your presentation. Great tips and very informative for the viewer. Great job.
i agree
From bathroom toilet install to my deck expansion, your videos are like gold to me. Appreciate the clear instruction. I'm a big fan. Keep them coming.
I love how you showed yourself making a mistake (45:30)!This is very important for us “do it yourselfers”. This is definitely a confidence builder. Thank you! Your videos are extremely informative. The best I’ve seen yet.
If he made one mistake, just imagine how many I'll make.
I literally build everything in and around my house by watching your videos sir. From bathroom, to doors and windows, to shed and now deck. Thank you.
That is awesome!
I just re-watched this video on ledgers - and several others. You're still the best! Thanks for all the education.
😂😂😮🎉😊
I'm only 34 minutes in and usually I rip through these to catch the broad strokes... I've watched every minute of what this guy has presented. Excellent and comprehensive video, easy to follow and thoroughly illustrated. Thank you for taking the time to share your craft Sir!
Made it to the end. Very thorough video. My Dad was a carpenter; I am an electrician. lol. I wish I'd have paid more attention to my Dad's craftsmanship back when he was alive. But thank you for your instructive videos; they really helped me hone up on some forgotten knowledge I had. I have a new house that I will be installing a 10' x 20' deck on with a handicap ramp for my mother-in-law and brother-in-law. Thank you and God bless.
Also flashing should be under the tarpaper
The best instructors are always even tempered, deliberate and purposeful. Never a wasted word or movement. Thanks!
Finally a deck frame built and installed properly on UA-cam. Great job, proper lumber dimensions used with a grade beam. Very refreshing to see.
Thank you very much!
I love that you include your mistakes and fixes.
This is one of the best renovation channels out there. I'm about to build a 30'x8' deck for a customer. Videos like this one here are a gold mine! From Norway, thanks a ton Shannon! You are appreciated man!
This channel is saving me tons of money. I learn here instead of paying to go to trade school. Thanks, Shannon!
Then I hope you donate at least a part of what you're saving to his Patreon account ;O)
This video series (see all 3) is THE authoritative source of expert information that made my deck build possible!!! There is so much noise and misinformation on UA-cam, half-baked, and downright dangerous "expert" advice on deck building techniques. Shannon's is the real deal. Of course, you will have to supplement with other videos to adapt to your own deck building situation, but these 3 videos from Shannon have all the core knowledge you need to DIY, even if you are a complete novice like I was.
This guy is as good as I have been, in the past.
I'm now 75 yrs. old, and enjoyed my earlier years very much.
Thank you Shannon...we have been considering a deck for about 20 years...I have received some pricey quotes over the years and you finally gave me the confidence to complete one myself...my wife wanted it big...turned out to be 24 x 16....took me several months working alone but it was well worth it! Cheers.
Months 🤔 3 days Max
Glad to see you make mistakes. Teaches us all that even the best can goof up sometimes and to pay attention to detail. Appreciate the authenticity. Keep it up.
Shannon, I love your presence, you are great. Thanks for all you do. Blessings upon you and your family.
Shannon knows everything. Any time I'm looking to learn ANYTHING, I look for Shannon's videos.
Thanks!
Absolutely! He is Great
I know this is 5 years ago but I need to tell you that your video is one of the clearest and concise videos about decking, and i've watched a lot! Nice to see a few wee mistakes too - I think that stuff only happens to me! 😆 Many, many thanx for your marvelous video.
I feel like I can build a house after watching his videos, he's very thorough
Thanks Robert
Hi Shaun can i get tip to do frame deck 12×10 and 2feet high ftom the ground
Me too. Almost
Wow! As a teacher with little carpentry talent, you explain things SO WELL. You are very clear and easy to understand. You give a guy like me great confidence to tackle anything. Thanks so much.
Every time you film a video and you think damn this is taking a long time...remember how much time you're saving every viewer by not making mistakes and being able to plan properly.
he shows how to fix mistakes which invaluable.
This is an excellent and very educational video. Most project/construction/DIY videos leave out the details and just skip to the major steps, but the details are the most important things to know! Looking forward to watching the rest of this series.
Glad you enjoyed it!
I like this guy, I learned a lot from him, he explains things step by step, he is a professional, 👍🏻🙏💪🏻👍🏻
I love these videos. Shannon you're well spoken and concise. Great instructional videos!
I found your video and used it to extend my deck by 5 feet. Can’t tell you how much I appreciate your video. You’ve saved me thousands of dollars in learning how to do it myself. So thankful.
You are so welcome!
You do a great job at teaching Shannon. I've built my share of decks but I'm watching your video anyway looking for any new info/materials, and tricks. GREAT job madman. Regular guy doing solid work, hats off to ya!
I'm not a pro, and I can tell most of the home renovation channels and handy men do stuff thier way and it Is sometimes wrong, I've seen crappy solder joints, lazy work arounds, bad sheet rock mudding, yet every single video on this channel is gold. I don't watch tv, I watch construction, home renovation,, and other videos for entertainment, and this man literally is the most effective teacher and tells you every thing you need to know and how to do it right, and I have never seen him do a bad job. I've done alot of these projects my whole life and watching him made me realize all the small mistakes I made in my life. I appreciate all your videos and hard work that goes into them.
Shannon your awesome I watch a lot of your videos. I recently purchased my first home, and do all the work myself with the help of your videos. Im interested in redoing my deck so these videos are key.
***** Thanks Alex! Glad to be of help. Please feel free to use our forum as a helpful DIY tool as well. Please spread the word of our helpful information. www.house-improvements.com/forums/
Alex Flores and hybrid b
Alex Flores I
Im a carpenter myself but never made a deck. Im building one next month. Best video on how to build a deck ever. Your quite talented as a mentor.
+Raisthlin Dom Thanks
Love how you explain WHY ... being a very visual learner and not even close to memory oriented LOL why is critical to me. Great videos!!!
I like how slow and detailed your vid is very easy to follow for people with no knowledge of building. Thank you.
I'm building a deck and find your videos really helpful. Thank you!
Few people are willing to show mistakes. The fact that Shannon doesn't cut the video to hide the mistakes shows you the real deal. All of us make mistakes. Great video! Thank you for taking the time to share your experience with the rest of us.
1/4" out of sq. before adjustment? Very nice!
Excellent video, thank you for putting it together and posting.
You take all the extra care that separates quality workmanship from average. And I appreciate all the details and tips that you remember to mention. A lot of instructionals take for granted that everyone knows these things. Great work and awesome video! Thank you!
Thanks for the kind feedback.
One of the best Home Improvement channels out there. Well explained as you go along step by step, in terms all can understand and discusses the simple issues you may come across as you attempt the same project. Nice one Shannon.
This has been the best video of how to build a deck
This is a great series. You're great at presenting this information, reasoning and demonstration. My first deck project (24x36) is a bit more than I could chew. Attended more "UA-cam University" and am learning more amd more. End result, I over killed some areas. Thank you for showing this, Shannon. You and the Crew rock at this information.
Well look at it this way, it is always better to do more than less. I use brushed-on Titebond glue on all exposed joint ends.
I built a cantilever deck like yours 17 years ago. Mine was 2x10” ....16’ long x 48’ wide (780sqft). The beam holding the deck was 2...2x10” with a 1/2” pressure treated plywood filler (required by code). This sits on 13....10”x48” deep concrete piles, even with the ground. The deck is about 16” above the piles. The framing is all green wood. The beam sits on the piles. The top is white cedar. I’m in the Chicago area. This year I will be repairing and replacing some of the white cedar boards. I have added 3 electrical outlets in metal conduit and a 1/2 black iron natural gas pipe with shut offs with 2 outlets for my natural gas grill. We have enjoyed this deck, & grill, even in the snowy winters. Thanks...Jim
PS.....I know you used screws with the hangers, but nailed the rafters on the other end, this seemed strange that you didn’t screw the rafters in? I used double hangers and Tico nails (just the way it was done then). I did use a similar flashing, but finished aluminum, under the siding but on top of the deck. The outside face of the deck was covered with a 2x12” green. I also used a cedar skirt all around the deck to the rock that was under the deck (required by code). Two stairs were used, one in the middle and one on the open end with a railing. Seating was on 1/2 of the deck and is usable sitting in or facing out. The grill is centered on the outside of the deck across from the sliding glass doors of the kitchen/dinette. This was my second deck I built, the other was similar to yours, 16’ x 16’ 3” also cantilever, all green. It is 24 years old, and has never been repaired.
Great build!
This HOWTO is so well put together. Thank you for making and posting it.
Check out these great woodworking plans here: HootWood. com
Jame Donovan oi
I am so happy that I found your video, I am just getting ready to build a deck on my mom's house and there is so much concise information here. I've watched the videos a few times, I know I can come back if I need to refer to it again. I can't tell you how great it is to feel a little more comfortable about tackling this job. Thank you.
good luck
HouseImprovement
You are a great teacher! Your instruction makes everything easy to understand. I feel so confident to tackle our project now! Thank You!
You are so welcome!
Your vids are easy to follow, I enjoy how you talk to people and not at them, that's what makes it enjoyable to watch & learn from.
It's like you are sitting there talking directly to us.
45:30 I love the honesty, love this guy, learned a lot from him when I remodeled my shower. 👏 👍 🙏
One of the best tradesmen on UA-cam. I love his channel and videos.
I’m subscribing just because of this.☝️ He keeps it real. Plain and simple.👍
I like everything you do except for the lack of pre-drilling. I feel, in a situation such as this, even though a manufacturer may say it's not necessary, the importance of mitigating stress within the board outweighs the convenience and speed of driving them straight in with no pilot hole, especially in drier dimensional lumber. As you're well aware, lumber loses much of it's strength as soon as it develops a crack or split.
As for the flashing, perhaps a bead of construction adhesive on the top edge of the ledger board would be effective to hold the flashing in place so the main sections don't move and the splice doesn't slide laterally from its location. Great job with your explanations; I really appreciate your ability to convey key information to the layman - a true teacher.
Agreed! What's with tradies and their antagonism towards pilot holes and pre-drilling? There are VERY SOUND Engineering principles to warrant drilling, so that the damn things last a whole lot longer ... wait ... there's a clue, right there. Hmmmm.
The BEST deck build I’ve seen so far! You covered all the important details. Thank you so much!
These contractor is a real Professional,he breaks things down throughly everybody is different as long as your going by code, and he those Lol he's name should be Code lol,that's how good he is
Awesome instructor. Its great that you never fail to mention all the little tricks of the trade that come with experience. Great videos! please continue, always learning something new from you.
what do you mean "hope you" stayed until the end.... Couldn't take my eye off the screen.... I really do like your videos and use the Knowledge you share regularly.... thanks for all you do....
I was searching for roll roofing videos and ended up watching the entire video. Shannon you're awesome!!!👍
Check out these great woodworking plans here: HootWood. com
When he said that I was like. I stayed ....lol ... his glasses tho. When he forgot to put them on I was waiting or the camera guy to whisper " your glasses".
People who don't make mistakes....are people that don't do anything. Nice shirt, nice hat. Nobody thought the video was too long. But some of us thought it was too short. Take your time. Your content is well worth even twice the length.
*Before you hammer your wedge bolts into the concrete!*
Put them through the bracket and add the nuts so they don't fall off and *THEN* put them into the holes and hammer them into place.
You won't have to bother with popping them sideways to fit by doing this. ❤🇺🇸🦅🔥
Time flies... Great teaching video. I too appreciate the honesty exhibited. Shows that everyone makes mistakes but if you want a good end product, correct the mistakes and move on.... Much appreciated!
Glad it was helpful!
Very good videos. Nice , clean, conscientious work. Glad to see that you noticed small "mistakes" before they turned into big mistakes. We've all made them but when you correct them they are no longer mistakes! Thanks.
Hate to be one of those people but those joist hangers are designed to have longer screws/nails in the 4 diagonal holes. That is so the screw/nail penetrates the joist as well as the framing member the joist is being hung on, in this case the ledger board.
whatever
He’s right though. 2.5 inch nails in the diagonals, 1.5 into the face
Good point. Thanks for pointing that out!
xl f u he’s correct
Do any of you have any manufacturing spec to share
Where I am we have joist hanger nails. (Heavy duty galvanized. But short)
They have a number on back 10 for 2x10. 8 for 2x8 and so on.
I'm sure you all know what I'm talking about.
But if you don't have the right number and one in every whole
Will not pass inspection! They don't accept any other fastener!
Hey Shannon, just wanting to say that your videos are #1. I have watched many videos that are construction videos and yours are very clear, detailed and professional. A lot of people say okay now do this but they don't actually explain WHY you're doing this and for what purpose. They don't even explain what screws to use. Your videos gave me a much much clearer picture of how to build decks. I think what I admire mostly is the way that your work area is mostly clean and not trashy. A lot of contractors have materials everywhere and are not so organized. Not to say construction is clean work but you can make it a lot more efficient as far as being organized and having your work station clear/clean. Thanks for making these videos I will be looking forward to seeing more videos from you. Thanks for the videos keep it up!
Thank you Merfin, we do strive to create the best DIY videos on UA-cam and as many people like yourself have pointed out I think we are getting pretty darn close with most of ours! I have always said you can not show most people how to do anything properly in a 2 min video and that is why ours are longer than most, but we stand by our productions and spend a lot of time behind the scenes prepping and preparing. We do however still mis some details but way less than most. Thanks for the comments and please share our channel with everyone that you know!
I like that you don't edit out your mistakes. Chances are we will make the same mistakes when building our projects and we were able to see how you corrected them.
BTW...what do you take to go in "Speedy Gonzales" mode? I'd like some of that too :)
I've just got how this works with the step by step process you've just done. Thank you and keep up the good work sir!
Did I miss some essential ingredient in snapping a stringline before he cut the joists to length??
The stringline was straight but how did he know it was parallel to the other end of the joists. Theoretically, you could snap a stringline that would be straight but the deck could end up a triangle.
I was thinking about the same thing. Probably he has a very good eye.
hawkesworth1712 556
This guy is a master at his craft. Everything he tackles ends up looking like gold!
Would this be a good time to consider adding electric power. When I did my last deck I didn't run power and regretted it later. If you know you will be using outdoor lighting, or other electric you may want to consider rough wiring at this point.
I just finished a deck and went with solar lighting....real easy setup too.
I have watched quite a few of your videos and can tell you're a real pro but humble guy who knows his stuff. Super enjoy your content. Excellent work.
Cool, thanks
I changed from the FM Lags to the Simpson SDWS -no predrill, smooth flat washered head that don’t limit where I place my joists. Check em out. Cool vid 😎
thank you so most for tip Simpson lag screws is the best and quicker
Best deck building instructional video on UA-cam! Thanks for actually showing everything you're explaining.
Great work. I would sure want you to build my deck. I am sure you are proud of your skills and work ethic. First class!
thank you for putting up this video! for anyone concerned about the floating joist at 56:45, you can buy a small sheet of galvanized sheet metal for
I bet Canadians love that one day a year that it is warm enough to wear shorts. I kid, I kid. Nice video.
We have pretty warm summers here usually. 21ish Celsius every day.
+Randy Bobandy That would be around 70 degrees in F which is just about the perfect weather. I live in the southeastern part of the US where you never know what kind of weather to expect. It was nearly 70 in late December this past year and 13 inches of snow on the ground a month later.
+wilsocn it was 15° on Friday and -15° today and 2" of snow. unbelievable
bruh, it's December 29th in Louisiana and I've been wearing shorts since April
I believe this was on a Wednesday!
What! A nail in a joist to hang the nailgun on? BRILLIANT! Thank you, Shannon & Co., your videos are Top Notch.🤗
I like that you didn't edit out the rim flip. "been there done that"
Thanks
I really appreciate that you admitted a minor mistake, now I'm a total fan of yours. I like honesty.
A minor correction. Those aren't lag bolts. They're lag screws. I mention this because if you ask for lag bolts at your home supply you'll end up with the wrong fasteners and they will probably ask you if you want nuts for the bolts.
ok thanks
nuts & washers.
They are lag bolts for sure. The hardware that came with my lumber has a box of 5/8" lag bolts for the ledger.
Correct they're screws, and you need some time out doing something other than scrutinizing deck fasteners
Looks like a 6 inch ledger lok
This is the best deck video on UA-cam, hands down. I'm building my first deck in a few weeks!
+Stuart Hughes thanks and good luck
you make really great vids! no one hand vids!
Shannon, everyone is always commenting on how great your work is, and I won't argue with them. however, I never see any comments on how well of a job your camera-man does. so, please relay the message! he does an excellent job of keeping up on camera shots while also lending a hand when needed
You are so true, Thank you for noticing and commenting.
Greats tips, im building my first deck ( 10x14 ) in one month, i can't wait, will be a fun project!!! Thanks you 😆
Love your videos. Here in Illinois we get several inches of snow so we usually build the deck down the height of a normal step( about 6 3/4 inches. I do this because I have yet to find a fool proof way to keep snow from weeping under the door. Flashings doesn’t work under the door sill. Do you have any ideas. Thank you. Your work is excellent.
These videos are excellent for the step-by-step process that is easy to follow! Great advise & saving potential building errors!
Thanks Shannon
Great video! One thing, joist hangers need longer screws or nails in the angled holes! 2-1/2" minimum according to Simpson strong tie! Most common mistake everywhere! Almost all pros make this mistake!
There are two different types (and 2 different trains of thought), one bracket accommodates angled screws, the other screws in at 90.
I always admire all of good constructors. They worked hard outside, they were really strong, and logical smart. Just if they are more detail and more accurate and more strong foundation. I think all of them can become a Pyramid builders. Bravoooooo........I love seeing all u guys projects. 1000Like
thanks again
Dang, this guy has experience and is detailed in his explanation
this guy is no Larry Haun hahaha
lady Jonah
Check out these great woodworking plans here: HootWood. com
No hes not but he is a good skilled carpenter and is very thorough.
45:32 Mad respect for keeping the blooper in the video. We have all been there my friend.
I've watched this video several times and learn something every time, also built some awesome decks, thanks Shannon.
Thank you so much for the video and wanted to complement you on being thorough and succinct. Definitely a great start for learning how to build not only a deck, but attaching it to the house and eventually setting the posts.
Best video I've ever seen on the subject! Length? Perfect! GREAT job! I feel smarter!
Awesome
i agree with everyone. i love watching your videos. the little details you add makes it so helpful. the fact that you mentioned to cut the flashing in a V for the nails that may get in the way was very nice. glad we live in the same city.
iKeel Porpidza Same city? Interesting , I guess you have seen me around. Thanks for watching!
HouseImprovements
just finished watching the video. that was a long one but very informative. i think i recall you mentioning it once on one of your videos or maybe i read it on your facebook page or website. you're based in the vancouver area right? my bad if i'm wrong :D.
iKeel Porpidza Vancouver, no a few provinces to the East ;-)
Shannon, you’re very thorough in your explanation - you’d be a great teacher. I have one observation: This family paid probably $6,000 to have a beautifully-poured concrete patio; why would they ever want to pay another several-thousand dollars to install a deck on top of it? Doesn’t make sense. They could’ve simply made a beautiful wide, decorative wood stairway up to the patio door, with a five-foot landing. Seems to me they wasted their money on the concrete patio. They could’ve simply installed a plastic membrane over the dirt, and installed landscaping rock on top of the plastic membrane in order to have a surface under the wooden deck that would quickly dry after a rain storm.
People do what people do. Actually they were having a slight water issue here and wanted to be sure water was directing away I guess. I did not do pad but it sure made a nice clean install for me! LOL.
I was simply watching this for my entertainment.i greatly enjoy the technique you used to put that together and there are some very smart methods thrown into it. Great work man!
Outstanding content. It's refreshing to listen and learn from someone that really knows what they are talking aboot. Keep 'em coming.
This is my go to video for my first-time back yard deck repair.
Very thorough! I was not able to find a video on how to install a deck on a concrete slab at least a foot high and this hit it right on the nail, no pun intended. Thank you!
Glad it was helpful!
Shannon - Thanks for sharing your knowledge! I like how you explain. I am putting a composite deck after a major home addition project. Learnt a lot from you friend.
Best wishes!
thanks for watching
Your videos are great. I think this is because you have a nice conversational style, easy to follow pacing and you stay on point. Thanks for sharing.
The way you explained the things and your knowledge base is awesome.
Glad you think so!
I am going to build this summer. The walking surface is 16 inches above the ground. I am going to build a
18 x 24. I will pour 42 inch footings in sonotubes. Ground slopes. Will extend footings up to rim joists and insert a 4x4 bracket holder into the wet concrete to be used to hold the 2x10 rim joists and center beam supports. No 4x4s or 6x6s. Joist hangers will support all joists. 2x8s with 8-10 spans. Really learned a lot from your video series.
Bracket will support the "beam" is what I hope you meant and not the "rim joists" unless the rim joist is an integrated multi ply beam?