I really like the concept. I’m planning one also. You should make more videos. You’ve got a good style. I’m not sure if your fan is pushing or pulling but you probably want a vent somewhere on your box so the air can move across the electronics and get that heat outta there
If you keep them mounted flat on the ground you could probably use a semi thick aluminum plate to mount those bucks. I find nice heavy flat sinks in car stereos.
Guys, be careful, you're dealing with high power here, don't kill youself! 1. what about shrink tube? (if one of the converteres get warm/lose because HOTglue it can short out) or the led strips get lose 2. fuses for the channels and main power? (that you can change easily) 3. just one opening (with the fan)? where does the heat exits/fresh air enters (depents on direction of fan) 4. driling smal holes for the screws prevent the wood from cracking (as seen from the top on the side panels).
The wires going into those screw terminals should also have ring or fork terminals on them. Those just look like they've had a bit of solder applied, which isn't a good idea.
This build was EPIC Bro! So much potential! I can tell you were having fun the whole time you were building this wicked cool power supply! LOVE the LED lights! Sick!!!
Brother man great build. Just so anyone about to buy the dps module it’s a step down converter not a buck boost, just buck. Which is still awesome it’s a great buck regulator! Not sure if you caught that
ok, so i put the items in my shopping cart for this build. $144.00 for a 5 amp power supply... lol I could get one ready to go at 10 amp for $49.00. But hell no.,... I'm going to build Drainmans for $144.00 lol Its worth the extra $100 bucks,,, Drain man rules... this hobby isn't about saving money its about Sending it !! custom only !! awesome video,, thanks for this one...im going to do patreon for sure,,
How hae I just stumbled upon this @DrainManFPV Bloomin love it! Started similar build but have added a 500wh 18650 battery bank inside, than you for all your videos, Love em mate!
@@docmalc47 LI-Ion, managed to buy a load of those small battery phone charger things when a store was closing down, each one had a 2500mah 18650 in it! So stripped them all down
Nice ,,, like the design,,,, but I didn't see any ventilation holes in the box , and maybe I just can't see them cause I'm sure you understand how air pressure and ventilation works... freaking sweet looking power supply though
Amazing, now just add a temp sensor so that the fan only runs when acertain temperature is achieved or over it. Now if I wanted say 120 volts and 10 amps?
I made my own circuit for the power supply but I was looking for something good-looking as a case and this is a really good idea! Probably I will use acrilic and I found a company that can cut all wholes quite cheap with laser so it is perfect (I mean the wholes that are difficult to drill like rectangular etc. as i don't have too many tools :/ ) . Anyway thanks for the idea! I usuelly don't buy those modules (I make them for my own) but always I have lack of ideas for the rest (case etc. hehe ) . BTW what I have noticed is that wood likes to crack sometimes when we use screws etc. (I have noticed that you have had some cracks in that wooden boards , I wonder how to avoid it 🤔).
Bel lavoro! Ma hai controllato se genera Ripple? Perche' i riduttori di tensione, non bisogna mai metterli vicini! Prova magari con una ricetrasmittente!
Hi Drainman, thanks for the vid. What would be the highest watts you could charge up to? I see that the inverter is limited to 180W. Thanks again. Edit: Would it be safe to parallel charge 6S lipo?
The module can handle up to 250w so the limit would be the 180w from the converter. At 5a with the large cooling fan you can definitely parallel charge some 6s batteries. Might add another heatsink. Remember this won't balance your cells, so check them first.
Great build. Really well done... i just didnt like when you powered up the drone with props on. Not trying to be a Karen but thats not good to show people. Also i know you threw a little disclaimer in on charging lipos but with no balance wires you could get a runaway cell. Then you will run away. Lol. Really sweet though!
You should have started with what the thing CANNOT do and you almost didn't have to talk. By the way: My grandfather also had an Iron Cross, but it was around his neck.
@@Bobo-ox7fj a smoke stopper is a little board that you put in between your battery and your drone, during the build process. It will instantly cut power if you have a short or something bridged. It keeps you from burning up your gear- and I don’t understand how you would r need one anymore.
I fucking knew it.......does this become the "flux capacitor" in about 4 years time? 😁 2:07 - Timestamps? Where we're going, we don't need any timestamps.......
Get rid of the stupid light organ. Better put some efford to get an extra zero ground so you have +- No polarity protection and only current limit adjustment on the ready made supply. This is not a bench power supply I want to have
Having a fan without any ventilation hole is very stupid design! For RGB leds you can buy digital controller with hundreds of programs for a few dolars instead of this primitive 3 switches.
I really like the concept. I’m planning one also. You should make more videos. You’ve got a good style.
I’m not sure if your fan is pushing or pulling but you probably want a vent somewhere on your box so the air can move across the electronics and get that heat outta there
If you keep them mounted flat on the ground you could probably use a semi thick aluminum plate to mount those bucks. I find nice heavy flat sinks in car stereos.
This power supply rules. Nice...
Guys, be careful, you're dealing with high power here, don't kill youself!
1. what about shrink tube? (if one of the converteres get warm/lose because HOTglue it can short out) or the led strips get lose
2. fuses for the channels and main power? (that you can change easily)
3. just one opening (with the fan)? where does the heat exits/fresh air enters (depents on direction of fan)
4. driling smal holes for the screws prevent the wood from cracking (as seen from the top on the side panels).
The wires going into those screw terminals should also have ring or fork terminals on them. Those just look like they've had a bit of solder applied, which isn't a good idea.
This build was EPIC Bro! So much potential! I can tell you were having fun the whole time you were building this wicked cool power supply! LOVE the LED lights! Sick!!!
Brother man great build. Just so anyone about to buy the dps module it’s a step down converter not a buck boost, just buck. Which is still awesome it’s a great buck regulator! Not sure if you caught that
All well and good putting the fan in it - but you didnt include any vents to allow the air that the fan pushes in to the case to get back out again!
ok, so i put the items in my shopping cart for this build. $144.00 for a 5 amp power supply... lol I could get one ready to go at 10 amp for $49.00. But hell no.,... I'm going to build Drainmans for $144.00 lol Its worth the extra $100 bucks,,, Drain man rules... this hobby isn't about saving money its about Sending it !! custom only !! awesome video,, thanks for this one...im going to do patreon for sure,,
This is soooooooo sick!
Also you need a passthru vent for air circulation then it will be complete
How hae I just stumbled upon this @DrainManFPV Bloomin love it! Started similar build but have added a 500wh 18650 battery bank inside, than you for all your videos, Love em mate!
what kind of battery bank?
@@docmalc47 LI-Ion, managed to buy a load of those small battery phone charger things when a store was closing down, each one had a 2500mah 18650 in it! So stripped them all down
Seriously though......I need this......
Dude this is epic, thanks for putting so much time into this video, I’ve been looking at buying a PSU for my bench but this looks like a fun project.
Is it more art or electronic work?
Nice ,,, like the design,,,, but I didn't see any ventilation holes in the box , and maybe I just can't see them cause I'm sure you understand how air pressure and ventilation works... freaking sweet looking power supply though
Amazing, now just add a temp sensor so that the fan only runs when acertain temperature is achieved or over it. Now if I wanted say 120 volts and 10 amps?
Excellent vid and the content, Thanks for sharing.God Bless
Impressive
I made my own circuit for the power supply but I was looking for something good-looking as a case and this is a really good idea! Probably I will use acrilic and I found a company that can cut all wholes quite cheap with laser so it is perfect (I mean the wholes that are difficult to drill like rectangular etc. as i don't have too many tools :/ ) . Anyway thanks for the idea! I usuelly don't buy those modules (I make them for my own) but always I have lack of ideas for the rest (case etc. hehe ) . BTW what I have noticed is that wood likes to crack sometimes when we use screws etc. (I have noticed that you have had some cracks in that wooden boards , I wonder how to avoid it 🤔).
Pilot holes to avoid cracking.
Only thing I would do different is use output meters with current and voltage display.
Very cool, thank you for this
Hello, and how do you connect the LiPo battery's to loading with a balancer?
cool build
Nice done, were put you the 100v 5a Schottky Diode, on you stocklist?
Coool. Bro..
It needs a small air inlet but man thats sweey
What are the diodes that are in the parts list used for?
Holy shit! I love it!
Where do I put all of these diodes?
Where did you buy that junction board breadboard thingy?
Bel lavoro! Ma hai controllato se genera Ripple? Perche' i riduttori di tensione, non bisogna mai metterli vicini! Prova magari con una ricetrasmittente!
ultimate hf radio reception jammer dont you mean?
What did you use for the signal pad on the led strip?
I'm subscribing
Sick
Where do you install the diode at?
I've seen some other lab PSU DIY and most of them install fuses, is there a reason why you didn't?
Super cool video!
what are you using a 3 position switch for
@DrainMan FPV
Very nice. Lookin good bro. Glad it turned out nice in the end
#CheApAssFpV #KwadSavages #Goonskwad
what is Schottky Diode for
Hi Drainman, thanks for the vid. What would be the highest watts you could charge up to? I see that the inverter is limited to 180W. Thanks again.
Edit: Would it be safe to parallel charge 6S lipo?
The module can handle up to 250w so the limit would be the 180w from the converter. At 5a with the large cooling fan you can definitely parallel charge some 6s batteries. Might add another heatsink. Remember this won't balance your cells, so check them first.
@@DrainManFPV Awesome thanks mate.
@DrainMan FPV
Turned out Awesome bro!!! Was waitin for a shout out ... LOL 😁
Where is the 100v schotty diode
Great build. Really well done... i just didnt like when you powered up the drone with props on. Not trying to be a Karen but thats not good to show people. Also i know you threw a little disclaimer in on charging lipos but with no balance wires you could get a runaway cell. Then you will run away. Lol. Really sweet though!
Whats the maximum voltage for this?
You should have started with what the thing CANNOT do and you almost didn't have to talk.
By the way: My grandfather also had an Iron Cross, but it was around his neck.
Why would you never need a smoke stopper again? I missed something
Smoke stopper is like GFI I think???
@@Bobo-ox7fj a smoke stopper is a little board that you put in between your battery and your drone, during the build process. It will instantly cut power if you have a short or something bridged. It keeps you from burning up your gear- and I don’t understand how you would r need one anymore.
You lost my attention at the colored lights
I fucking knew it.......does this become the "flux capacitor" in about 4 years time? 😁
2:07 - Timestamps? Where we're going, we don't need any timestamps.......
I have to admit I did lose a little confidence in your pitch at 'my most favouritest'....
Sorry too much emphasis.
Get rid of the stupid light organ.
Better put some efford to get an extra zero ground so you have +-
No polarity protection and only current limit adjustment on the ready made supply.
This is not a bench power supply I want to have
Having a fan without any ventilation hole is very stupid design! For RGB leds you can buy digital controller with hundreds of programs for a few dolars instead of this primitive 3 switches.