I have checked and the 700cc has a shorter stroke. It makes sense, I suppuse other crankshaft and longer con rods. So thay can use same other components like pistons, cylinder, head, cam chaint etc...
Hello Great Video! I am disassembling my FZ 750 to and now have a problem with the removal of the Black screw on the left side (the one who is blocking the view for the T where you can see the postiton of the cylinders). Do you have a trick for removing it? Thanks!
Hi, thanks for you comment. I would try using a large washer instead of a screw driver. Less chance of damaging. See how I thighten that in this video: ua-cam.com/video/3psS-sP-5nI/v-deo.html Good luck :)
My 87 FZ700 is at 39,000 miles. It's due for a valve clearance check. Never done one before, is it possible to do it with the engine still in the bike?
Please, what is the spark plug key ? The workshop say 14mm,but this is not usefull for me.I have also tried whith 15,16,17mm but I can't get it. Thank you for your videos.
I got almost done. The caps on the lifters got scrambled and put in a different order. So, I heard I have to feeler gauge something and adjust? How? What? Last phase of getting back together.
I just need head gasket replacement 91 fzr 600. It's this much work? I'd be better off just replacing whole engine with a ebay. I did that 3 years ago, wasn't that bad, but new used engine from massachusettes proved to be poor shape. Think paid $480.00. What do you think? Junk and give up?
@@jh-tech5546 A lot of disassembly. How hard to put back together? How line up timing chain? The gap gauge at beginning is so know clearance on reassembly? Is there a way to leave valves attach and just pull head? All I need is that head gasket.
Got apart. next time, just buy another engine. Had to drop engine out of bike. This is what need to know, which side is up on new gasket?@@katywalker8322
I had to order parts at different suppliers. There is no complete engine rebuild kit. Quite some parts from Yambits (gasket kit, cam chain, etc...) and some original parts from cmsnl (piston rings, pins, ...).
Yes, and the question is? As far as I know the YZF750R engine is from the same architecture. So a lot of similarities. But since it is newer it has a lot of improvements and some parts will be different. But from an assembly point of view similar.
he valves themselves are attached to the head. So if you only remove that cover wich is the housing of the camshafts the valves stay in place. The only thing you need to remove are he buckets from the valves. At least it is like that on the FZ but I think it is the same on an YZF. I hope this answers your question.
Trying to put back together. I changed that engine before, having trouble putting back. I pulled that bolt half out for some reason that hold back wheel on, now it won't go back in.
Got both. PB blast lubricant and swing bolt slip right on. Even manual didn't have bolt and pitch. A AI called deepai gave me size, pitch and length and got at regular hardware store. That ai sight amazing.
Putting back together what thought blown head gasket. Gasket not blow and just tightening the head bolts would of probably resolved. Big job, waste of time. It's was ten times easier putting a entire engine in in one piece, then this tear down. Waste of time. My recommendation is instead of tear down, just replace engine as a whole.
Yes, replacing the engine is much faster and can be cheaper. You just have to be sure the engine you get is in good condition. For me it was also as hobby so I don't mind spending the time.
@@jh-tech5546 Got engine together, haven't put together enough to see if run. Now, my son lost all frame bolts when he moved bike when I was out of town. What size are those front frame, 13mm or 15mm? Only that one long bar on bottom of engine for mount? Keep looking for diagrams online but nothing clear enough to help.
Focus, solid technique, experience, accuracy, love for FZ.
It's a moving video that puts it all together.
You are a super technician! ! !
Thank you!
Love your work. Please keep posting
Killer vid man, just bought one of these as a project bike. Thanks
Thank you ,nice videos👍
An old egg carton is a good way too keep the followers organized.
Thank you for this good tip!
Do you know how they came up with the 700cc engine? Some say de stroked others say smaller bore?
I have checked and the 700cc has a shorter stroke. It makes sense, I suppuse other crankshaft and longer con rods. So thay can use same other components like pistons, cylinder, head, cam chaint etc...
Hello
Great Video!
I am disassembling my FZ 750 to and now have a problem with the removal of the Black screw on the left side (the one who is blocking the view for the T where you can see the postiton of the cylinders). Do you have a trick for removing it?
Thanks!
Hi, thanks for you comment. I would try using a large washer instead of a screw driver. Less chance of damaging. See how I thighten that in this video: ua-cam.com/video/3psS-sP-5nI/v-deo.html Good luck :)
Easy to tell which cam is the intake and which is the exhaust :)
That's true :)
My 87 FZ700 is at 39,000 miles. It's due for a valve clearance check. Never done one before, is it possible to do it with the engine still in the bike?
Hi. Yes, it is possible to do on the bike. I would advise removing the radiator and carbs for easy access.
Please, what is the spark plug key ?
The workshop say 14mm,but this is not usefull for me.I have also tried whith 15,16,17mm but I can't get it.
Thank you for your videos.
Hi, the spark plugs are DR8ES-L so the spanner size is 18mm. Thanks for you comment.
I got almost done. The caps on the lifters got scrambled and put in a different order. So, I heard I have to feeler gauge something and adjust? How? What? Last phase of getting back together.
I assume you mean adjusting the valve clearances. You can check a video on the YZF 750 I posted recently or you can find many info online. Good luck.
I just need head gasket replacement 91 fzr 600. It's this much work? I'd be better off just replacing whole engine with a ebay. I did that 3 years ago, wasn't that bad, but new used engine from massachusettes proved to be poor shape. Think paid $480.00. What do you think? Junk and give up?
The gap gauge part has me lost? will I have to pull engine out of bike?
I think the head gasket can be replaced without removing the engine from the frame. Gap gauge is to measure valve clearances.
@@jh-tech5546 A lot of disassembly. How hard to put back together? How line up timing chain? The gap gauge at beginning is so know clearance on reassembly? Is there a way to leave valves attach and just pull head? All I need is that head gasket.
@@tommyfield-q5w, it is possible to remove / replace the fzr600 head with the engine in place. Setting the cam timing is very easy on the 600 engine
Got apart. next time, just buy another engine. Had to drop engine out of bike. This is what need to know, which side is up on new gasket?@@katywalker8322
Friend where did you purchase the engine rebuild kit?
I had to order parts at different suppliers. There is no complete engine rebuild kit. Quite some parts from Yambits (gasket kit, cam chain, etc...) and some original parts from cmsnl (piston rings, pins, ...).
Which side is up on gasket? Sides are different, original was different.
a tab on gasket has UP stamped through it.
thank you. I can see it.
Hello. I have a little question .
Namely, I mean Yamaha yzf750R..
Yes, and the question is? As far as I know the YZF750R engine is from the same architecture. So a lot of similarities. But since it is newer it has a lot of improvements and some parts will be different. But from an assembly point of view similar.
Forgive me that it reply so late. My question to remove the cover under which the screws from the are located head. You have to dismantle the valves.
he valves themselves are attached to the head. So if you only remove that cover wich is the housing of the camshafts the valves stay in place. The only thing you need to remove are he buckets from the valves. At least it is like that on the FZ but I think it is the same on an YZF. I hope this answers your question.
Trying to put back together. I changed that engine before, having trouble putting back. I pulled that bolt half out for some reason that hold back wheel on, now it won't go back in.
also, lost bolts that hold bottom side bar, engine cartage, can't find right size.
Got both. PB blast lubricant and swing bolt slip right on. Even manual didn't have bolt and pitch. A AI called deepai gave me size, pitch and length and got at regular hardware store. That ai sight amazing.
Putting back together what thought blown head gasket. Gasket not blow and just tightening the head bolts would of probably resolved. Big job, waste of time. It's was ten times easier putting a entire engine in in one piece, then this tear down. Waste of time. My recommendation is instead of tear down, just replace engine as a whole.
Yes, replacing the engine is much faster and can be cheaper. You just have to be sure the engine you get is in good condition. For me it was also as hobby so I don't mind spending the time.
@@jh-tech5546 I may have to replace. Probably get back together enough to junk.
@@jh-tech5546 Got engine together, haven't put together enough to see if run. Now, my son lost all frame bolts when he moved bike when I was out of town. What size are those front frame, 13mm or 15mm? Only that one long bar on bottom of engine for mount? Keep looking for diagrams online but nothing clear enough to help.
Скажите, где стоит номер двигателя?