No? Brent! With the roundness of the guards bonet the squareness of the wheel look don't make the look quite right. With this Vehicle it's more of a circular finishes even in the designs of it's Bumpers back not so much but the front mostaush gives it that roundness. So No I say don't ruin what's it's great look. That squareness ruins it.
@@65cj55 thanks for your rely still I guess your the master in this field I s'pose. Never mind I do enjoy your shows 'n as marvellous of a job you do designin' cut 'n dice metal then weld amazes me. Still keep up the great work I'll still be watchin' 'n thanks for askin' us viewers advice as well as readin' our Comments. Cheers give my regards to Ester too if that's ok?
The waterfall on the hood is the 1st thing which caught my eye goes well with the caddy bumper love the roof line aswell super cool the whole truck has it going on the stance the width the lines …love this thing already😁👏🏻👏🏻👏🏻🧨🧨🧨🦾🔥🔥🔥
Water Fall, it's like a chrome racing stripe that's low enough to see it. Dash is beyond cool. Topless and hard top will be worth it. Like to see orchard tractor style fenders on backwards. Opening song reminded of late after school our band teacher had that same style music record on and was pretending to conduct with the white wand, When the door behind me closed, he stopped and turned around, His eye glasses completely fogged from sweat and I'll never forget that smile. You took me back 48 years. Thanks.
Your invisions for a vehicles are usually way better than I would have imagined so go for what you are invisioning. I love the concept of this truck already
Chrome, Chrome, lotsa chrome. Fenders look custom with the flares & the hood chrome will go with all the Caddy chrome. Love the look of this build. Rock on Brent
Yes go with the square wheel fender flares. Yes go the side pipes that finish just in front of the rear wheels with a small side step under the cab. Looks like you have new life in building the 49 GMC.
Definitely love the removable hard top idea. Like the pontiac hood trim but it also looks good without it. Big grill always looks cool. Definitely a cool "different " truck.
Hey Brent great looking project from your ideas. waterfall yes fender flares yes caddy bumper yes side pipes yes small step up yes shorten bed no. I think you got a great vision so far and I think these episodes are very exciting, listening to the ideas and vision that you have for whatever project you’re working on. I have to say I liked that little dance that shimmy and shake you did when pulling out from it’s resting spot. Can’t wait to see it come together. Later
YES!!! finally some customizing right on Brent so sick if l.s swaps and will it runs of course it'll run or you wouldn't waste your time on it yes put the thing on the hood go all out til the garage is ready then get back on the 35 dodge can't wait to see how this build turns out I like the roof you're building for it love it!😊
Really like the flared fenders . Caddy grill/bumper would be nice . Waterfall is a plus or minus have to wait and see , most likely a plus. You always have fun projects..
This is the build I wanted to see get started, to get running. There are so many design's you can go with this truck to do something that is different from what everyone else has done. Widen the back fenders so you can see them when the truck is coming down the road with a wild Grill & widen back fenders? Only a suggestion I'm shire everyone else has something in mind.
Awesome job Brett. Can't wait to see more updates an projects and many more videos soon my friend. Keep up the great craftsmanship and hard work my friend. Fab on. Weld On. Keep Making. God bless.
You’re right Brent. Never seen this truck. Sounds like big plans. Soft top.Air bags. Side pipes. So, getting your new shop with New projects. Thanks for sharing. 💯👍👊
It's your build you can do whatever you want to it but I like the original wheel well openings but customize away! It does look better on the ground I'm loving your thought process on the grill and bumper
Good to see you are still at it! Looking forward to shop update. I think the box length is good. I personally would not whack the back off to make it look like a service truk.
I've been in love with this truck for a long time! I'm so happy you're working on it again. I love the square wheel lips on the front. Put full fender skirts on the back. Definitely do the Pontiac water fall trim on the hood. Put some frenched lake pipes on it. Just my thoughts... 🍻🤘😎🤘
I definitely think the fender arches add a lot, reminds me of early 60's California custom show cars. Not sure about the Caddy grille, it seems too big to me. I really enjoy your channel and love Pablo's input.
Looks good with the wheel lip flares on it. Especially with that caddy bumper on it. I think this build is going in a very good direction. Also I like the Pontiac waterfall on the hood also.
The existing body lines on the front and back fenders are way cool - I wouldn't mess with them!
Agreed Leave It Be , Less is More
i threw up when he started to cut up fenders for flares @@bigfoothunter666
You are a machine Brent, I wish I had half the energy you have. Thanks for the content. It’s always most appreciated.
Same here.
Add them they look good
Clean bonnet, the big caddy grill is plenty of dressing and deserves all the attention. Looking forward to whatever your decision is. 👊
No? Brent! With the roundness of the guards bonet the squareness of the wheel look don't make the look quite right. With this Vehicle it's more of a circular finishes even in the designs of it's Bumpers back not so much but the front mostaush gives it that roundness. So No I say don't ruin what's it's great look. That squareness ruins it.
@@Walter-ri1li The square fender cuts look good, takes away from the bulbous look those trucks have.
@@65cj55 thanks for your rely still I guess your the master in this field I s'pose. Never mind I do enjoy your shows 'n as marvellous of a job you do designin' cut 'n dice metal then weld amazes me. Still keep up the great work I'll still be watchin' 'n thanks for askin' us viewers advice as well as readin' our Comments. Cheers give my regards to Ester too if that's ok?
@@Walter-ri1li It ain't my channel, i'm just a viewer like yourself..
Caddy grill and bumper with dagmires spot on
The waterfall on the hood is the 1st thing which caught my eye goes well with the caddy bumper love the roof line aswell super cool the whole truck has it going on the stance the width the lines …love this thing already😁👏🏻👏🏻👏🏻🧨🧨🧨🦾🔥🔥🔥
Brent you hammered it right on the head looks awesome dude
Thats a rad build :)
So many projects running through a fellas mind. And then changing ideas midway. I know some nights i cant sleep when the mind starts working.
Water Fall, it's like a chrome racing stripe that's low enough to see it.
Dash is beyond cool.
Topless and hard top will be worth it.
Like to see orchard tractor style fenders on backwards.
Opening song reminded of late after school our band teacher had that same style music record on and was pretending to conduct with the white wand,
When the door behind me closed, he stopped and turned around,
His eye glasses completely fogged from sweat and I'll never forget that smile.
You took me back 48 years.
Thanks.
Square flairs is a refreshing design for that year of truck. GO FOR IT !!
Totally agree with you.
It’s going to be a cool looking truck 👍👍
Can't wait to see that when you are finished with it! Going to be sweet!
Can’t wait to see the rest of the vision.
I like the new look for the 49 GMC Rodester. Gonna be really cool.
Awesome as Always... Such a Cool project.. Love the Look
Always exciting when you bring on something “new”. 😊👍👍
No grass ever grows under your feet! Another great video!
Im ready to see the roof on the shop. Lets go team!
Really excited to see this baby back in the shop. Can't wait to see what you will do with it!
Really like your pickup builds.
Of cause the General.
This one also looks promising.
Loved the shot of the pup laying on your shoulder during the ride 🥰 Pablo looked very relaxed
this sure was an episode of an artist's mind set in action Brent , and from the looks of it , your mind is set ... .👍🏼✔
The whole back fender looks like it needs to come forward. Love what your doing.🥸
It’s going to be a nice cruiser. Anxious to see what all you do with it. 👍
Hay Brent, hope the new shop is going well
It's slow but things should be happening soon
So happy to see you back doing metal craft and showing your vision and skills.
Your invisions for a vehicles are usually way better than I would have imagined so go for what you are invisioning. I love the concept of this truck already
Love this build thanks for bringing it back cool truck
I am loving this build. I hope you do even more custom touches to it!
Definitely go with the waterfall. Looks great and it ties in with the dash . Plus I'm a Pontiac guy 😂 I like the arches idea
I love your job...congrats!!!
POWER TOUR 2024. Thank you for getting back to this I remember the videos you did and loved it. cant wait to see where you take it
I agree the caddy front would look super good in that grille opening.
Keep the box. That way, you have the room for the top and ice chest for drinks. That's what I would do 😊
Hi Brent! It's impressive how you jump from one project to another! This promises to be very interesting!😎
Chrome, Chrome, lotsa chrome. Fenders look custom with the flares & the hood chrome will go with all the Caddy chrome. Love the look of this build. Rock on Brent
Rear skirts that fade away that thick lower line and definitely do the front fender lips. My 2 cents 😅 this is going to be so Kool!!!
Yes go with the square wheel fender flares. Yes go the side pipes that finish just in front of the rear wheels with a small side step under the cab. Looks like you have new life in building the 49 GMC.
Yes diggin the fender flairs go with it!!
In California when I was a kid, we called the side pipes, Lake pipes....
Yes sir Brent, you should cut and narrow the bumper to fit it in the grill's opening ...✔🍺🍺
Definitely love the removable hard top idea. Like the pontiac hood trim but it also looks good without it. Big grill always looks cool. Definitely a cool "different " truck.
Interesting collection you have. Glad you are sharing all of your past creations
Brent, i like the fenders with the fender pieces. Cool Pablo looking great guarding his kingdom..
Hey Brent great looking project from your ideas. waterfall yes fender flares yes caddy bumper yes side pipes yes small step up yes shorten bed no. I think you got a great vision so far and I think these episodes are very exciting, listening to the ideas and vision that you have for whatever project you’re working on. I have to say I liked that little dance that shimmy and shake you did when pulling out from it’s resting spot. Can’t wait to see it come together. Later
YES!!! finally some customizing right on Brent so sick if l.s swaps and will it runs of course it'll run or you wouldn't waste your time on it yes put the thing on the hood go all out til the garage is ready then get back on the 35 dodge can't wait to see how this build turns out I like the roof you're building for it love it!😊
I've always liked this build. It's great to see you bring it back.
Hello Brent, really like the fender flares, and the water fall hood chrome, sweet 👌. Take care and stay safe.👍
Really like the flared fenders . Caddy grill/bumper would be nice . Waterfall is a plus or minus have to wait and see , most likely a plus. You always have fun projects..
Those flairs are awesome!! It makes the truck look bad ass.. you’re a genius Brent.
This is the build I wanted to see get started, to get running. There are so many design's you can go with this truck to do something that is different from what everyone else has done. Widen the back fenders so you can see them when the truck is coming down the road with a wild Grill & widen back fenders? Only a suggestion I'm shire everyone else has something in mind.
Always fun to get the creative juices going. This looks like it will be a fun project. Be safe and stay well.
Awesome job Brett. Can't wait to see more updates an projects and many more videos soon my friend. Keep up the great craftsmanship and hard work my friend. Fab on. Weld On. Keep Making. God bless.
Love the look of the big chrome piece on the hood and the caddy grill
I'm diggin your whole idea From bumper to roof to fender flares !!! Full on custom GMC !
This is going to be a killer ride when it's done! Love the arches and I think the Pontiac waterfall would look awesome on the hood!
I like the addition on the fenders… it just looks more finished.
I like the Pontiac hood trim piece idea ! …and the dash !
You’re right Brent. Never seen this truck. Sounds like big plans. Soft top.Air bags. Side pipes. So, getting your new shop with New projects. Thanks for sharing.
💯👍👊
Liked how you take the time to explain to us what you see in this project ! I like with the arches looks really nice.
Really looking forward to this one
I'm digging it. Cool stuff. Enjoyed watching ✌️ 😎
Looks good!!!! I vote for the hood center trim.
It's your build you can do whatever you want to it but I like the original wheel well openings but customize away! It does look better on the ground I'm loving your thought process on the grill and bumper
Love the custom look, Pontiac trim, Caddy bumper.. Nice stuff.
Shoots Brent , I like your ideas...
Commin' along...👍😎
I like the added fender piece. It brings a unique touch.
I bobbed the box on my 51 GMC truck to fit a Jeep chassis and it looks great! Only a few inches makes a huge difference visually.
Looks great! The fender lips match your windows, ties in nicely!✊😁
I like the Water Fall, Gives the hood a different look.
LOVE the Pontiac waterfall on the hood, especially with the Pontiac dash !
Excited for the new (old) project
Whatever you decide will be awesome to watch, as always with enthusiasm. I love watching you work. It's just that simple.👍👊
Your work always amazes me. Looking forward to this build.
Looks fantastic!☆☆☆☆☆
Hey Hi again Halfass Costoms Brent and Ester from the D Michigan 😊 thanks for sharing your new project I'm looking forward to seeing it done 🎉❤
It's going to be a cool ride... I like the flairs.
Glad to see the '49 back in the mix. I have been waiting for that one to return. I think that is even the one that got me hooked on your channel.
That’s a good looking truck!
once again a lot more vision than I would have but so creative. I think it's going to be another very cool truck, keep pressing on!
Look forward to following this one,
Yes, to the arches,
The frontfender looks great
Love the truck. 😊 I think the original body lines are classic. The arches are OK, too. Make sure your bride approves 😂
I'm liken the fender flares myself looks like a nice custom look
Good to see you are still at it! Looking forward to shop update. I think the box length is good. I personally would not whack the back off to make it look like a service truk.
As it sits; thats a beautiful truck. Cant wait to see how she turns out.
I really dig the addition to the wheel wells.
Brent yes put that trim on the hood water fall it really looks cool love the Carson top it's a beautiful truck.
Arches are definitely way cool! I love your thought process!
Hey man, that is the process, I think that you are quite good at it , so for me, nice to watch, cannot wait to see the new shop finalized, cheers
That roof is going cool I like that you want to make it nice looking not that patina shit this has been the best vlog in a long time Brent
I can see that truck in Sonic Blue paint! You have inspired me to get my butt in gear on project, love your content!!
I've been in love with this truck for a long time! I'm so happy you're working on it again. I love the square wheel lips on the front. Put full fender skirts on the back. Definitely do the Pontiac water fall trim on the hood. Put some frenched lake pipes on it. Just my thoughts... 🍻🤘😎🤘
I definitely think the fender arches add a lot, reminds me of early 60's California custom show cars. Not sure about the Caddy grille, it seems too big to me. I really enjoy your channel and love Pablo's input.
You have an awesome amount of ideas! I know I did 3 cars and 1 truck in 25 years. You are a machine! Lol 😊
I really dig the waterfall trim!!!!
I like the fender flares and the Pontiac waterfall. Having a harder time picturing the Cadillac bumper. Bre
nt I love your videos.
Passenger side arches the best. Liked the whole video, always interesting and iintriguing.
Excellent video Brent :) also like that cab roof look too and plus peices you put on fenders too!
In 1955 Chevy had a cab over one and a half ton truck and your fender flares reminded me of those trucks. I think your on to something good 😊
the right front flare at 30 min is GREAT
Looks good with the wheel lip flares on it. Especially with that caddy bumper on it. I think this build is going in a very good direction. Also I like the Pontiac waterfall on the hood also.