if you are having issues with it and your controller goes off you need to go into core isolation in your settings turn of memory integrity. reset pc and try agian.
can you do this for console aswell?? same steps then just unplug the controller and plug it in your console? or is this just for pc. Works on pc I just changed my controller from 4ms to 1ms ty!
When I click filter on device I get an error pop up. When I click yes to do it anyway and follow all the steps it turned red and there was no value under binterval. Looking this up further I think I need to turn off my antivirus. On windows 11 I'm not sure how to do that. I found my way to core isolation settings and it says only the admin can turn them off even though I am registered as admin and signed into my account. PLEASE HELP
When I try to over clock it and I click on filter on device it says some warning and when I ignore it, it goes red and bugged out and I restart it and it’s back to normal what do I do for the filter on device part why is it doing that
How do you do this for android!? I'm been playing fortnite & cod on android for quite some time with a decent mid tier phone, and the half second input delay is just k*lling me! Making me miss shots and losing fire fights. Playing with the kishi controller
whats the difference in the rate values? i.e. you said choose the highest value which was 1000, but when i installed i had 8000 available so i selected that one instead
Mine doesn’t stay , my controller gets delayed over time , I have to unplug cord from usb and plug back in and the overclocking lasts like 60 seconds before my delay kicks back in im so frustrated
if I overclock my controller the duration on the xinput app says around 0.5 to 0.9 with some spike to 9 or 8. Jitter is 1.8 and the max is 9 and min is 0.4. If I drop it to 500 it's a consistent 1.5 around that with a 0.5 jitter and 5 max what should I choose
Does HIDUSBF need to stay open in order for the effect to remain? I could have swore I did this with my controller and after restarting my laptop it appeared to reset.
@@DaltonNotDalton you need to disabled memory integrity in windows defender. Just so you know, after you disabled and install driver you will not be able to turn memory integrity back on. The only way to do it is to reinstall windows. Also if you play warzone there's a chance you'll get shadow banned.
i did this and it said that my security settings wert blocking the driver from changin or something, then i turned off memory integrity and the controller is updated to the new settings, but now i cant turn memory integrity back on and i am worried that i am now at risk
Bro I’ve had my pc since 2024 summer and I didn’t even realize it until I tried overcooking my controller but I’ve had memory integrity off the whole time and I’m chilling, then again I make sure not to click on anything sketchy
@@o_LogicaLI did turn off secure boot, still not working. It gives me the option to install service anyway so I clicked yess but now under the child name tab it shows up red with no name
In the program, the line for my controller turns red. It says the filter is on, and the rate is at 1000, but then all the rest of the columns are blank. When I click 'install service', it says I shouldn't, then I do it anyways, and then nothing happens. Does anyone know what this means?
@@KyloKraze I completely uninstalled my controller, which allowed me to uninstall the driver, and set my security settings back to where they were. I haven't messed with it sense, because I'm just not computer savvy enough to know what's going on.
that thing does not work or the way you show the installation isn't the right way. Now I have a driver an unknown driver installed and i'll force the read the entire "readme" to uninstall it
I extracted the zip file and only have setup not exe. When I go to change my rate is gives me an error and then turns the bar red, making my controller useless. I have antivirus off so I'm not sure what else could be causing it not to work.
Just use the highest rate it will allow. Some devices may not be able to handle the highest possible one. Just use whichever works and gives you the lowest latency.
@@lastsonofkrypton25 Double click the "sx64" file underneath "setup" once you've extracted that and gone through the steps THEN click on "setup" and follow the video.
Just here for y'all. You can't overclock an Xbox Controller to 1000mhz. It's impossible. They're capped at 125mhz to 250 at most. 1000mhz is fake. I've tested it. In the program it does indeed says 1000mhz but it's fake.
@@batmanfv11 Indeed i've heard it's and most likely the only one to do so... didn't test it myself tho. 3/4 of xbox controllers can't even overclock even if it tell you it's.
I had the same issue. Then i clicked directly on the zipped folder( not the unzipped one), and tried it again. Now it shows up exactly like in the video. So once the call of duty update is downloaded i can test if there is actually any difference.
@@skyler4456the first folder i downloaded was zipped. So i unzipped it. Maybe it automatically unzipped for you? Try to look for it in your downloads. Maybe you will find it.
From everything I have seen someone tested pretty much every xbox controller using this software and used another software that read controller input times and this did absolutely nothing for any of the xbox controllers because they are hard capped at 240hz and 120hx depending on the controller.
This doesn't work. You're only overclocking the USB port now poll at 1000hz, but the controller itself is still at 125hz. Next time, you can use a program to confirm the actual input delays and do a before and after to see if there are any differences.
Buddy if it’s not plugged in then don’t worry about overclocking it, plugging it in is half the battle as having it plugged in lowers latency and input lag by a lot, overclocking it just polishes it up
my controller is now broken. i clicked the restart button on the app and now my controller wont connect to my pc even tho the wire is connected, please help
Xbox stock controllers/elite controllers CAN NOT BE OVERCLOCKED, only controllers so far are Gamsir, Victrix, Thrustmaster, "some" Scuf and i don't know about any others so far,. VICTRIX: 1,xxx Hz Gamesir: 1,xxx Hz Thrustmaster: X = 500 Hz & S = 1,xxx Hz Scuf: I've never bought one and tested it And Xbox consoles CAN DETECT OVERCLOCK, why do I know this? Cuz i time the controllers input testing. When I overclock to 1000 Hz the test is done faster compared to if I do a test for 500 Hz and 250 Hz and 125 Hz, the test takes longer and longer and longer to complete and i can see the actual difference through the menus and my inputs and games that I play
i hope you know since your using an xbox controller it doesnt matter what you set your controller to with lord of mice your microsoft xbox controller is hardware locked at 250hz meaning your input delay is stuck between 4-7ms and there is nothing you can do to reduce it unless you use wireless when it is wireless its 1ms just like on the xbox console ITS ALL PLECEBO SORRY TO SAY BUD
Everybody says oc don’t work for certain controllers just try it. I tested my scuf envision hella times by swapping ports and it definitely felt better on tha oc port.. like literally night n day because I got put into ah match wit super sweats.. not oc port I was losing almost every gunfight, oc port im instantly winning 90% of my gunfights n even pulling sum naaaasty ass outplays on multiple players. Try it for yourself don’t listen to tha people in comments online tryna spread misinformation n shit. If it feels like it works it works fuck y’all mfs lmao
@@SkiddlySkip how do you change the controller back to default setting if the controller is showing red and not green on the USB Devices Rate set up page?
If you're having issues, I have a longer video that I did years ago that may help: ua-cam.com/video/UKlLyjr1RJs/v-deo.html
Everyone else was making this way more complicated than necessary. Thank you for the swift and clear explanation.
if you are having issues with it and your controller goes off you need to go into core isolation in your settings turn of memory integrity. reset pc and try agian.
The Goat 🐐
THANK YOU
straight forward and to the point good work
are there an benefits to doing this to the other non keyboard n mouse/controller devices? like overclocking ur bluetooth or other audio devices?
Thak you for this information, now my controller feels so much better
so glad you made a new one. my new controller was 7.
have u had any issues after downloading
@@2smokecorey no issues. I do it with every new controller I get.
can you get it below 7?
@@__Baileyy it should be at 1000 and 1 if it’s at 7 u did something wrong possibly
@@2smokecorey ok thanks
can you do this for console aswell?? same steps then just unplug the controller and plug it in your console? or is this just for pc. Works on pc I just changed my controller from 4ms to 1ms ty!
When I click filter on device I get an error pop up. When I click yes to do it anyway and follow all the steps it turned red and there was no value under binterval.
Looking this up further I think I need to turn off my antivirus. On windows 11 I'm not sure how to do that. I found my way to core isolation settings and it says only the admin can turn them off even though I am registered as admin and signed into my account. PLEASE HELP
Right click on the program and run as admin
Search on youtube the error code you are getting probably 577 or 193 and how to fix it overclocking your controller and you will find the solution
i also have got this problem too did you manage to fix it if so how?
Hello.... I read that the Xbox controller onlay just have a 125hz polling rate.
So i shouldn't work
appreciate the help with this content
my turtle beach recon controller was doing good but i thought by overclocking maybe it gets less delay and now after the overclocking i got delay😕
When I try to over clock it and I click on filter on device it says some warning and when I ignore it, it goes red and bugged out and I restart it and it’s back to normal what do I do for the filter on device part why is it doing that
Highlight your controller, select Install Service, then check Filter Device
U gotta turn off secure boot in ur bios
@@Egochall628 rip.
Mine does the same after I do what he says and unplug and plug it back in it goes red
Double click the "sx64" file underneath "setup" once you've extracted that and gone through the steps then click on "setup" and follow the video.
How do you do this for android!? I'm been playing fortnite & cod on android for quite some time with a decent mid tier phone, and the half second input delay is just k*lling me! Making me miss shots and losing fire fights. Playing with the kishi controller
What if it doesn't show the download button and theres only the option to browse files?
when i go to click install after doing all that it does nothing? can someone please help??
thank you so much, this is to easy and useful :D
whats the difference in the rate values? i.e. you said choose the highest value which was 1000, but when i installed i had 8000 available so i selected that one instead
Mine doesn’t stay , my controller gets delayed over time , I have to unplug cord from usb and plug back in and the overclocking lasts like 60 seconds before my delay kicks back in im so frustrated
if I overclock my controller the duration on the xinput app says around 0.5 to 0.9 with some spike to 9 or 8. Jitter is 1.8 and the max is 9 and min is 0.4. If I drop it to 500 it's a consistent 1.5 around that with a 0.5 jitter and 5 max what should I choose
What controller
@soldonwish victrix gambit
Just depends how often the spikes are, but after I overclocked it the controller keeps turning off and on how do I fix this?
Does HIDUSBF need to stay open in order for the effect to remain? I could have swore I did this with my controller and after restarting my laptop it appeared to reset.
Why does my screen freeze two seconds every minute when it’s over clocked and is it a fix to the problem?
do you still have to have the controller connected via the cable, or can i play wireless and settings not be effected?
why would you overclock a controller to use it wirelessly??
does this setting sit on the controller or pc? Meaning can I do this overclock and then use it on an android device with said overclock?
Only for pc
Doesn't work for me. Was getting pink highlight after and controller won't work on games.
Yeah same here. Tag me if you find a solution please!
@@DaltonNotDalton you need to disabled memory integrity in windows defender. Just so you know, after you disabled and install driver you will not be able to turn memory integrity back on. The only way to do it is to reinstall windows. Also if you play warzone there's a chance you'll get shadow banned.
i did this and it said that my security settings wert blocking the driver from changin or something, then i turned off memory integrity and the controller is updated to the new settings, but now i cant turn memory integrity back on and i am worried that i am now at risk
Bro I’ve had my pc since 2024 summer and I didn’t even realize it until I tried overcooking my controller but I’ve had memory integrity off the whole time and I’m chilling, then again I make sure not to click on anything sketchy
when i click filter on device an error comes up saying, "error trying to test loading of filter service: 577"
Have to turn off secure boot off in bios of pc.
@@o_LogicaLI did turn off secure boot, still not working. It gives me the option to install service anyway so I clicked yess but now under the child name tab it shows up red with no name
Make sure you give full name and SSN to.
In the program, the line for my controller turns red. It says the filter is on, and the rate is at 1000, but then all the rest of the columns are blank. When I click 'install service', it says I shouldn't, then I do it anyways, and then nothing happens.
Does anyone know what this means?
i have the same problem did you figure it out
@@KyloKraze I completely uninstalled my controller, which allowed me to uninstall the driver, and set my security settings back to where they were. I haven't messed with it sense, because I'm just not computer savvy enough to know what's going on.
THANK YOU! Got yourself a sub my guy. Thank you!!
Cheers brother!
MY CONTROLLER IS NOT POPPING UP WHAT DO I DO
why does my controller tab turn pink when i unplug it and plug it back in
Had the same issue, I used the "restart" function and that got it back to green
Can you overclock while playing on a console?
What if I have no number where the one should be?
that thing does not work or the way you show the installation isn't the right way. Now I have a driver an unknown driver installed and i'll force the read the entire "readme" to uninstall it
So it worked but my biinterval shows nothing after i installed service. Did i do it right !
I did the duel sense edge controller and it gave me 8000 option. I did that and install service and then i unpluggd plugged back in and it went pink.
me too lol, idk if its okay or not
@@oberver1014I ended up getting mine to work by clicking device name then hitting restart then repeating the said process above. If that makes sense?
@@jefferyosterman3381 yeah I figured it out, thanks for reply
can someone help me, everytime i do it and unplug the controller and plug it back up my controller wont turn on and it wont work
Just gotta change it back to default
whats up with the "A driver cannot load on this device" error
I extracted the zip file and only have setup not exe. When I go to change my rate is gives me an error and then turns the bar red, making my controller useless. I have antivirus off so I'm not sure what else could be causing it not to work.
Just use the highest rate it will allow. Some devices may not be able to handle the highest possible one. Just use whichever works and gives you the lowest latency.
same issue bar goes red ig I cant do it watched 2 or 3 different videos now
any of you guys solved the problem when the bar turns red?
@@lastsonofkrypton25 no
@@lastsonofkrypton25 Double click the "sx64" file underneath "setup" once you've extracted that and gone through the steps THEN click on "setup" and follow the video.
Any idea how to fix error 537 (I think it was that number) when I click the filter on device checkbox?
When I go to turn filter on device and it says warning
can i delete the software after overclocking it?
Now I can become the guitar hero god I dreamed of as a child
Done this and now my controller just doesn’t connect to my pc at all even with usb
Just here for y'all. You can't overclock an Xbox Controller to 1000mhz. It's impossible. They're capped at 125mhz to 250 at most. 1000mhz is fake. I've tested it. In the program it does indeed says 1000mhz but it's fake.
the victrix gambit xbox controller can over lock to 1000mhz
@@batmanfv11 Indeed i've heard it's and most likely the only one to do so... didn't test it myself tho. 3/4 of xbox controllers can't even overclock even if it tell you it's.
What about the turtle beach stealth recon for Xbox?
Gamesir can
@@Paiwhz Gamesir and Gambit might be the only ones so far. Didn't test em' myself but I've heard some did the test and it was working.
my xbox elite cant overclock; check polling rate still at 124Hz.
Xbox controllers are hardware polling rate locked; they cant be overclocked
Dont forget to buy a decent usb cable, i have done this a few times and each time its killed the usb cable
Guys all my friends says that you controller can break when you overclock it is ist right
Hi all, I try and put it on 1000 and it’s goes red, doesn’t turn back on
Thanks
Uninstall your controller in devices on windows . Then replug your controller
my controller isnt popping up in the app
If mine says 1 for controller I don’t do anything right?
If it's already as low as you can get it, then of course
the exe doesnt open why?
filter on device gives me an error.
I don’t see any solution to the ‘error’ problem. I only see, if it doesn’t work, don’t do it. Therefore…I’m opting out
When i click install my screen freezes? any help please
I cant do it, it turns red and i cant do it again. Help
I had the same issue. Then i clicked directly on the zipped folder( not the unzipped one), and tried it again. Now it shows up exactly like in the video. So once the call of duty update is downloaded i can test if there is actually any difference.
witch zipped folder?
@@skyler4456the first folder i downloaded was zipped. So i unzipped it. Maybe it automatically unzipped for you?
Try to look for it in your downloads. Maybe you will find it.
thank you so much bro
It don't works on my PS5 Controller .
From everything I have seen someone tested pretty much every xbox controller using this software and used another software that read controller input times and this did absolutely nothing for any of the xbox controllers because they are hard capped at 240hz and 120hx depending on the controller.
i have an xbox series elite 2 controller, is it worth it to even try and overclock it?
worked for me but my controller is still stuck at 2-4
Is 20ms bad input lag for single player games ?
No
my controller has gone red on the app and now not recognized by games
Mine too. How did you fix it
@@cj9960 deleted the driver for the controller. Restarted pc and plugged it in again, repeated process and it worked.
@@cj9960 so we all just got broken controllers now lmao
When i open the app, doesn't let me click on anything like its frozen
Try running as Admin
Yeah i have @@SkiddlySkip
ok well after i repulg my controller back in the bar turns red
It’s because the setup file isn’t actually installed on your computer. You’re just missing one step. Go to the guys video above this one and follow it
thansk apprict it fr
@@donemediumrare739
it says my rate can be 8000 do i use that
he said "the highest possible" so yes
This doesn't work. You're only overclocking the USB port now poll at 1000hz, but the controller itself is still at 125hz. Next time, you can use a program to confirm the actual input delays and do a before and after to see if there are any differences.
and now my controller wont turn on
Mine turns red….
This program causes fps drops I went from constant 180fps to below 100 fps games are now unplayable
i dont see setup.exe all i see is Setup or is it the same
Make sure you extracted the zip file!
oh and turn off antivirus because it will think its a virus and will deleat exe
Is set up the same
Mine says 1000 4 can’t get it to 1ms
same
What if ur controller doesent pop up at all
Run as admin or unplug / plug back in
When I reconnect the Wolverine V2 controller it no longer works, perfect
Did you fix??
@@Guessm-b6g Yes, but I don't remember how I did it :(
Does It burn into the controller? or just tune the polling rate on PC by software? Because I want to increase it for XBOX console
It’s the usb so idk I think it’s pc
doesnt work it shows thats its red and now it doesnt show show up when i replug it in
same mine turned red and the controller didn't turn back on!!!
@@theafrocain9203mine too how did you fix it
Doesn’t work on Xbox controller
My shit turned red after that and has nothing under blnterval
my controllers not working now thnx
My controller does not work after the overclock
Change settings back to default
it doesnt show up anymore
@@SkiddlySkip
this work for bluetooth too?
No
Does this work when playing wireless? Or do I need to keep it plugged in?? 🤟
Buddy if it’s not plugged in then don’t worry about overclocking it, plugging it in is half the battle as having it plugged in lowers latency and input lag by a lot, overclocking it just polishes it up
@@jinxed-450 I see, then wire it is! Thanks man!! :)
@@pillsen8964 no problem buddy
Why....
my controller is now broken. i clicked the restart button on the app and now my controller wont connect to my pc even tho the wire is connected, please help
take out the filters , leave it on defautl and restart it
Bro it’s cases lag and drop frames in game
yeah and i even uninstalled service still lags like shit now everything is fucked up
its showing up as a red filter over my controller now and it wont even work
Just switch it back to the default settings if you’re having issues. Your controller is fine. If 1000 is too high, you can try a lower number
Dont turn on filter device until you put the max input then you can turn it on
Mine turned red bro
thank you
Xbox stock controllers/elite controllers CAN NOT BE OVERCLOCKED, only controllers so far are Gamsir, Victrix, Thrustmaster, "some" Scuf and i don't know about any others so far,.
VICTRIX: 1,xxx Hz
Gamesir: 1,xxx Hz
Thrustmaster: X = 500 Hz & S = 1,xxx Hz
Scuf: I've never bought one and tested it
And Xbox consoles CAN DETECT OVERCLOCK, why do I know this? Cuz i time the controllers input testing. When I overclock to 1000 Hz the test is done faster compared to if I do a test for 500 Hz and 250 Hz and 125 Hz, the test takes longer and longer and longer to complete and i can see the actual difference through the menus and my inputs and games that I play
i hope you know since your using an xbox controller it doesnt matter what you set your controller to with lord of mice your microsoft xbox controller is hardware locked at 250hz meaning your input delay is stuck between 4-7ms and there is nothing you can do to reduce it unless you use wireless when it is wireless its 1ms just like on the xbox console ITS ALL PLECEBO SORRY TO SAY BUD
YOU CAN TEST THIS WITH A SIMPLE INPUT DELAY MONITOR TOOL THERES TONS OF THEM
what do you do if you're unplugging and plugging back in and its red?? using an elite 2
having same issue
Is it worth overclocking a wireless Xbox One controller? Or does it only work with the wired ones?
very worth it, it works on wireless controllers but they have to be connected via usb
or the charging port of the controller per say
What if it runs red
mines like this too
Just switch back to default or a lower number
It works but my bi interval/ ms time says 2-4 is there any way to get it to 1
same for me
Everybody says oc don’t work for certain controllers just try it. I tested my scuf envision hella times by swapping ports and it definitely felt better on tha oc port.. like literally night n day because I got put into ah match wit super sweats.. not oc port I was losing almost every gunfight, oc port im instantly winning 90% of my gunfights n even pulling sum naaaasty ass outplays on multiple players. Try it for yourself don’t listen to tha people in comments online tryna spread misinformation n shit. If it feels like it works it works fuck y’all mfs lmao
My controller won’t even work now.
Now my remote won’t even turn on 😭
Change it back to the default settings
@@SkiddlySkip how do you change the controller back to default setting if the controller is showing red and not green on the USB Devices Rate set up page?
uninstall the controller in your device settings then re plug it back in and it should work@@patrickcarmenjr153
You do know you can’t overclock and Xbox controller right ..there hardware locked
I thought you could lower it by a smidge but it's not really worth it
Dude so what do I do
8ms is the best I can get idk why it feels really difficult to aim
incorrect buddy boy
the Xbox controllers are hardware locked but you are changing the polling rate of the usb not the hardware of the controller sir
@@coleelliott3248 you still can only send a certain amount of info to the controller a second it’s been tested lil man
i cant find the download on Github only error
Clearly not working
Now my controller doesn’t work
Go to device manager and uninstall the controller driver
thank you, you are a legend lol@@jeanscarlosrodriguez7701