Це відео не доступне.
Перепрошуємо.
Valvoline Quick Lube Messed Up This Suburban...[Chevy 5.3L Oil Change]
Вставка
- Опубліковано 29 тра 2024
- This 5 minute oil change ended up taking me an hour. (FACEPALM)
Oil filter I used here: amzn.to/3X4kLPg
Oil I used here: amzn.to/3V60S7K
This 5 minute oil change ended up taking me an hour. (FACEPALM)
Oil filter I used here: amzn.to/3X4kLPg
Oil I used here: amzn.to/3V60S7K
This is the only way I was able to leave a comment.
Man sorry to hear about your thumb I don't know why I didn't see you've been doing so many videos.
Awesome to see you are included the next generation
You won’t believe how many ford explorer aluminum oil pans we replaced for the quick lube shops. 🤦🏼♂️
I change my own oil because I know what's going in it. I have Mobil 1 full synthetic in it now.
Good oil
Several years ago my son took his for an oil change. They left the dipstick partially out and somehow got in the serpentine belt and tore it to shreds. Naturally they wouldn’t do anything about it. I wouldn’t go there if was free now..
Yikes
Run over to your local automotive tool store. You can purchase a good set of oil filter removal tools. They look like a oversized socket and fit over the filter and come in a variety of sizes to fit the different filters. They have a square hole in the middle to fit a socket wrench. Obtain a long handle breaker bar or ratchet wrench. Another good filter wrench is a strap style that uses a socket wrench or breaker bar. On your next oil change have that tool with you. Then if you encounter another super over tightened filter. Easily slip it on loosing the and your done in 10 minutes. Save yourself the hassle and headache.
I like the Alligator🐊 wrench with the big teeth!
I always have to use the filter pliers and I tighten them by hand when installing
Guys got 100 guns no oil filter wrench really 😂
Everything costs money :)
Why would he buy the most expensive oil and filter and not have any tools 🤪🙄
Using the good stuff for the service. Apart from grade and type of oil, it is handy looking at the API Specification when choosing the oil.
I am not a fan of them drive-thru change places.
My own experience was to clean the oil filter surface, , lube the gasket with some of the drained oil, screw on the filter after you meet resistance tighten 2/3 of a round never had one leak . I have seen this , my air filter left loose, a new Ford Ranger and they pulled the radiator cap(1992) and told me it failed the pressure test, No calibration on the machine.LOL transmission oil pan bolts left loose , lucky on that Ford I did not burn it up coming home. and last the tech pulled the trigger on the oil hose before he had it in the oil fill hole. Oiled the outside of my engine . I only go to dealerships now. for many many years. Quick lubes ruin more trannys and engines than you can count.
I have a 2017 Sil;verado LTZ with the 5.3. Because it's direct injected, I put an oil catch can on it. Every month I dump about a shot glass of blow-by oil from that can. The hoses from the catch can help stabilize the funnel when I refill the crank case. I love the menu on my Silverado; you just toggle straight down to get where you want to go. Some other vehicles, you have to go down and toggle left or right. We actually had a Jeep Cherokee Trailhawk where you had to step on the gas pedal a couple of time to re-set the friggin oil life gage!
Wow
I always hand tighten my oil filters and never had a leak.
Same
yeah once hot it tightens by itself
Just for reference, that oil change cost more than what you ciphered. That Royal purple was $8/quart x 8 quarts =$64. Adding a $17 filter brings you to $81 not including tax.
I never touch a oil pan bolt, just use a fluid extractor
Over tightening is a big problem with some places. Last fall I had some new tires put on my truck. And later decided to check my brakes myself. Literally couldn’t believe how tight they had gotten the lug nuts. If I had not been able to jar them loose with a 2lb. Sledge hammer. .good that I didn’t have a flat in the middle of nowhere.👍
Shewee
Tires places torque lug nuts down to 120 lbs of torque
@@brucelewis1017that's wrong
I betcha the wheels were damaged somewhat. There's nothing wrong with calling them on it if you can show the damage and have them buy you a new set.
Get a big pair of channel locks! Piece of cake!
You should have just buy the correct tool in the 1st place a filter wrench for a lot less frustration
Nah. Shouldn't have to use it. I'm broke. Everything costs money. They shouldn't have tightened it so tight.
I wouldn’t say it was Valvolen specifically. I would however say this is a problem with almost any shop that specializes in oil changes. I’ve had them put antifreeze in my wipe fluid and strip out the drain plug. On top of that most of them won’t use the oil required with decos 1 and will cause engine issues in these newer vehicles. Even if they say they are using it.
Yup
Back in the 90's my cousin took her Ford SUV to a quick change for oil change. That car actually had a drain plug in the trans pan. Sooooo after they got done needles to say she made it about 2 miles up the road & the car quit. After having it towed, they realized the quick change drained the transmission fluid & then put engine oil in. So it has Zero trans fluid & twice the engine oil !!
She took them to court but it was close to 2 yrs before they finally paid up ! In mean time she had to buy another car to get to work & was still paying for the messed up one.
I WILL NEVER use a quick change place nor will i use Walmart. I've heard horror stories from them too.
YIKES
I had an oil filter that took hours to remove. Tried my hand, then oil filter wrench, the screw driver trick, nothing worked. Finally I got some channel locks on it and it finally came loose.
Shewee!
Eqsy to do on the drive type of job. Nothing complicated, even the quick places should be doing it right and very quickly given the frequency they do the job, the fact they mess it up is nuts to me!! 0w-20 for the ambient temperature you have there seems liggt, we use 5w-30 here in Ireland and no issues, given summer is 20deg C! At least you got it sorted. All the best from Ireland 🇮🇪
The oil change places do that, so you have to bring it back to them to change it again.
i recently bought a oil filter wrench cause i couldn't get the dang filter off.
the thing is I was the one who installed the filter last time...
😝😝😝
New sub here! I feel your pain! I do my own oil changes on my 21 Ram Rebel with the 5.7L Hemi. That engineer should be fired where he put that filter! Frustrating as H#$$. Great video!
Yup! My Ranger filter location makes absolutely no sense. Thanks for watching!!!
I have had the Caddy dealership mess up on my XT5 oil change. First time I did the oil change myself and….Drain plug on way too tight and when I got it off noted the built in gasket on the plug was missing. Not stuck on the pan. Screened the oil from the drain pan into a clean container…..no gasket. No doubt that gasket was missing for who knows how long. Went to the local Chevy dealer and picked up a new drain plug. The parts guy was stunned that it hadn’t leaked. Oh, and the filter? Took a bit of time with the oil filter wrench to get it loosened. Have not been back to the Caddy dealer since. That wasn’t the only problem I have found with their work.
Yikes
With all due respect, is this your first oil change? You don't have a filter wrench?
Everything costs money. Always either come off by hand or jab a screwdriver. I'm poor
@@WhoteewhosGarageyeah right! I'm poor!! Royal Purple ain't cheap! Get the jaws wrench. Or just snug up the filter yourself from now on.
My wife’s aunt took her car to Valvoline had the oil change got a block down the road and then Engine locked up. They never put any oil in it.
YIKES
To save your hands and not make a big mess, I use an adjustable rubber strap wrench to change filters on cars and boats.
One of the things that I do is to write the date and mileage on the oil filter.
Great idea
I despise the quickie oil change places...daughter couldn't understand why I got a little upset that she went to Jiffy Lube for an oil change. Too many horror stories out there about the quickie lube joints ruining too many engines. A strap wrench would save your hand when you run into a tight one.
Yup I've had several big issues. My wife had a Volvo they didn't put the drain plug all the way back in. No oil in it by the time she got home.
@@WhoteewhosGarage I was afraid of that happening when my daughter went. There have been too many reports of loose drain plaugs and seized engines after an oil change at the quick lube joints.
why would a tiny little 5.3 need 8qts? seems ridiculous when old 7.4 liter engines used 5. especially if modern oils are "superior" than old oils... makes you wonder.
No telling. More oil is better tho. Racers always putting on bigger oil pans
I've got a 2017 Silverado LTZ with the 5.3; it does take 8 quarts. I traded in a 2020 Mustang GT for a Dodge Charger Scatpack. That Mustang took 10 quarts! The Charger with the 6.4 Hemi takes 7 quarts.
@@AStanton1966 i have a 2013 ram with the 5.7 it takes 7. I just dont see why. 6 is ridiculous 7 is nuts 8 is absurd. 10 qt is insane. Seems to me modern oils might not be all that good if you need more than 5
I remember taking a car I owned to a Jiffy Lube years ago. They over torqued the fill plug and my car was leaking. I’ve been working on my cars ever since.
Shewee
Great video. I have a question.
Did you encounter a problem with the lifter and camshaft?
My car is a 2015 Suburban LTZ,
I've only had the lift cam fixed twice in 70,000 miles, the oil used is 0w-20, now I've used 5w-40 for 100,000 miles and never had a problem.
No I have not had that problem
The McDonald's of the auto industry
I just had to use a big pair channel lock pliers to get mine off I feel you I was pissed
Yup
I know all about those 20 minute jobs taking 3 times that. I do bodywork and paint. Anyway, the job I'm on now was budgeted for 5 months, I'm at 4 years.
Shewee!
AWESOME SAUCE!!! 👌🏻
WhooooTeeWhoooo!!!👍🏻👍🏻
I saw on your other channel that you were injured. Now I know how it happened.
Yup!
1000 ft lbs torque makes sure it aggravates you enough you will bring it back to them
Hey if 1 ugga dugga is good for tightening up a drain plug and filter, 10 ugga duggas is even better 😂😂😂
Nooooo
🤣🤣🤣
Usually 2 different way to oil change at the oil change station one basic oil change and check level only and second part like 30 min or 45 min oil change they had to look throughly check as maintenance and fluid condition that is extra times to free diagnostic time but pay them near 90 dollars oil change. Always information what I need to keep up my car stay running but Basic oil change is faster and quicker but not look throughly maintenance check.
They are charging $150 for the basic quick oil change on these now
@@WhoteewhosGarage it could be scam try other shop with fair price
That was an AC Delco filter. Probably not a Valvoline oil change.
It 1,000% was at a valvoline last
@@WhoteewhosGaragemaybe they didn’t change the filter?
The Toyota dealer in Nicholasville, KY did the exact same thing. They will never again touch my vehicle. I destroyed the plastic filter housing trying to get it off. I was wary about the drive through places...but the Toyota dealer? C'mon man!
Yup. Crazy
Hey man you sound like Hank from King of the Hill.
HaHa!!! I was thinking the same thing! I wonder if he sells propane and propane accessories....Whoo
tee is a good guy...i used to wath his firearms videos.... good to see he"s expanding his horizons
Dangit bobby
New videos every day on gun channel still
Good job 👏 👍
Hey Peter
Makes me hate working for this company even more, they make us use band wrenches to tighten the filters when you don't need to, just get them hand tighten and that's all that's needed. Sometimes a vehicle will come in and it was done at a Valvoline and the filters are on so tight sometimes I really have to work at it to take it off, good thing I'm leaving that company soon
Yikes
1000 fb on that filter
Or more!
@WhoteewhosGarage I believe it I have had to do the same thing in my shop. Because of them quick lube places
I use the same oil and filters on all my cars. RP and K&N are the best
Awesome
Oil is 42$ for 5qt jugs, truck takes 10, filter is 20$, so they aren’t really charging much for labor
They get their oil at STEEP discounts for buying in bulk. Large majority of the fees in the "labor" of 10 minutes. I clearly show what I paid in the video. Your prices are way off.
27 for Mobil 1 oil, 11 for Mobil 1 filter.
Have you ever changed oil before 😂😅
Yup
royal purple or mobile 1?
Both great
Do you like cars or guns better ??? Who cares we love em both. haha
Cars 🤣🤣🤣
K & N fikter is junk ' mobil 1 is better.
Mobil 1 is good but I wouldn't call k&n junk
They're both made by champion labs they're almost the exact same filter