MGB PISTON TEST ON THE DYNO AT 7800RPM

Поділитися
Вставка
  • Опубліковано 22 гру 2024

КОМЕНТАРІ • 4

  • @nzsaltflatsracer8054
    @nzsaltflatsracer8054 2 місяці тому

    Well the pistons stayed in the block if that's what you were testing but it sounded more like it nosed over at about 6k to me.

    • @GREngineering
      @GREngineering 2 місяці тому

      Your very close 6500 RPM it made max HP i did run it to 8500 RPM but i did not want him in the room at that RPM

  • @clivewilliams3661
    @clivewilliams3661 2 місяці тому

    This is an excellent example of stand-off that plagues SU carbs. You should never run SUs without either long rampipes or a filter because that stand-off is showing a waste of power. I would have expected that the purpose of a dyno run was to make max power, not to lose it with a poor installation.

    • @GREngineering
      @GREngineering 2 місяці тому

      Hi Clive
      May be you should spend more time on a dyno if ram tubes make more power i would have them on the SU's
      Graham Russell