How I Got The PERFECT STANCE On My 2019 MUSTANG GT Premium WITH NO RUBBING **LOWERED 5.0 S550**

Поділитися
Вставка
  • Опубліковано 28 жов 2024

КОМЕНТАРІ • 231

  • @CanadianCruisin
    @CanadianCruisin  4 роки тому +1

    What should the next mod be?? If this helped you out with your car please share the video and hit that subscribe button!

    • @Jack-b5o6r
      @Jack-b5o6r 4 роки тому +1

      Industrial defroster !

    • @CanadianCruisin
      @CanadianCruisin  4 роки тому

      @@Jack-b5o6r cold enough already that I could use one 😂

    • @joshodin19
      @joshodin19 4 роки тому +2

      Boost!!

    • @CanadianCruisin
      @CanadianCruisin  4 роки тому +2

      @@joshodin19 I need a lot more youtube subs for that one haha

    • @FYMM69
      @FYMM69 3 роки тому +1

      @@joshodin19 whipple 😆

  • @memo1975
    @memo1975 4 місяці тому +1

    This guy did his homework. Clearly not a hack job, well done and thanks for sharing

  • @jesusmunoz2017
    @jesusmunoz2017 6 місяців тому

    Stock height in the front i put 265-40-19 with the offset of 9” and in the back 295-40-19 with if the offset of 9.5”. The back is flush with the body in the front its a little tucked in but the set up is good

  • @jsauginas
    @jsauginas 3 роки тому +5

    Not sure if you noticed but you have a decent crack or slice in the sidewall of your front passenger side tire. I noticed it around 5 minutes 41 seconds of your video. Hitting that bump may have caused that.

    • @CanadianCruisin
      @CanadianCruisin  3 роки тому +1

      That was from a guy at work getting to close with a pallet on a forklift lol. Ripped a good chunk off the sidewall. Tires will be finished after this season so figured leave it until the new rubber goes on

    • @diyonwoods9702
      @diyonwoods9702 Рік тому

      I was riding to new Orleans and next thing you know. All my air went out my tire in my 5.0. I made it to a tire shop, it was a slash kind of hole in the sidewall man. Now I know one of those potholes(very notorious in Nola) may have caused that.

    • @TeeJayEastBeast
      @TeeJayEastBeast 28 днів тому

      @@diyonwoods9702 born and raised in Nola. Potholes are like the abyss out there 😂

  • @MikeFyxdt
    @MikeFyxdt 4 роки тому +2

    Car looks great! The front wheel well looks so tight from how the camera shows it you’d guess there’s no way that you have clearance when the wheel is turned and you go over bumps. Mustang magic! Great place for your photo shoot btw. Cleanest loading dock I’ve ever seen!

    • @CanadianCruisin
      @CanadianCruisin  4 роки тому

      Yeah the magic fitment pixies are on my side haha. That area is great for filming. Lots of new developments there so wide-open and not much traffic.

    • @MikeFyxdt
      @MikeFyxdt 4 роки тому +1

      @@CanadianCruisin I need to find some new places to shoot! (Could also use some fitment pixies!)

    • @CanadianCruisin
      @CanadianCruisin  4 роки тому +1

      @@MikeFyxdt a low convertible would look pretty good

    • @MikeFyxdt
      @MikeFyxdt 4 роки тому +1

      @@CanadianCruisin agreed!

  • @joshodin19
    @joshodin19 4 роки тому +1

    The car is coming along!! I like it alot!

  • @stangedude5646
    @stangedude5646 10 місяців тому

    I like my wheels a little under the frame of the car. You don't have to worry about crushing your fenders on a hard bump.

  • @fstgatotv
    @fstgatotv 3 роки тому +1

    Man great job the car gets better all the time. Super stance 💪💪💯💯

  •  4 роки тому +2

    Inspirational! I don't like wheel gap on cars that have a very sleek silhouette such as the S550! Flush or damn close to it is what I am for and it seems like these springs will do the trick! Wicked looking pony, mate! Thing looks sinister! :D

    • @CanadianCruisin
      @CanadianCruisin  4 роки тому +1

      Thank you😊 im trying to build it to look as good as it will run. No point in having a bunch of power if it doesnt look right :)

    •  4 роки тому +1

      @@CanadianCruisin IKR!? I just bought a 2015 S550 a few months ago and loving the thing. I noticed your build list and noticed a lot of chassy braces. Do you have a video going over those?
      I know well of the stop the hop stuff and plan to lock up the rear with BMR's full suite of options but I'm not familiar with the front K member bracing etc. Care to elaborate?

    • @CanadianCruisin
      @CanadianCruisin  4 роки тому

      @ yeah I have videos on all the suspension stuff so far. The K brace just stiffens up the front. Makes it a little more solid and responsive in the corners at higher speeds. Kinda helps keep it planted

    •  4 роки тому +1

      @@CanadianCruisin and the NVH is unchanged or simply not noticable?

    • @CanadianCruisin
      @CanadianCruisin  4 роки тому +1

      @ you bet. It rides as smooth as stock still. Only difference is the braces hang lower so you have to be careful over speed bumps and stuff. Other than that no issues

  • @wade_debo
    @wade_debo 4 роки тому +1

    Looks good ! Love it keep up the good videos !

  • @Jack-b5o6r
    @Jack-b5o6r 4 роки тому +1

    The stance of your car is awesome !

    • @CanadianCruisin
      @CanadianCruisin  4 роки тому

      Thank you 🔥

    • @JAG6.7
      @JAG6.7 4 роки тому +1

      It’s looks way better in person don’t get me wrong the stang sits very good on the video.

  • @trbstang
    @trbstang 4 роки тому +3

    Looks really good! Almost perfect. 😉 When I eventually lower my 16 GT PP, I'll definitely keep these springs in mind. I also have spacers on mine, 25mm front and 20mm rear. I tried the 25mm in the rear and it was a bit too much for me. Just adding the spacers makes such a difference! Thanks for showing us the details on your car and I'll be looking forward to more! Oh, and I've run a square setup on mine for a while, 9.5 wheels and 275s. They should fit in the front I would think easily.

    • @CanadianCruisin
      @CanadianCruisin  4 роки тому

      Thank you. Glad you enjoy the videos. Nice thing with the s550 is there are so many options out there and they all look so good. It's a hard choice to pick one haha

    • @tatsuhirosatou5513
      @tatsuhirosatou5513 Рік тому

      This comment is saving me a lot of work I'm going square because I'm doing a handling focused track build instead of a drag build

  • @BM713
    @BM713 Рік тому +2

    That is the perfect fitment and stance. The exactly clean and simply look I’m going to be aiming for! Thank you!

  • @malcolmkennedy652
    @malcolmkennedy652 4 роки тому +3

    I would have went 20mm in the rear, 25mm just stick out a lot. But that's me. Also would have went maybe .75 of an IN the the rear to give a tad more rake for the front. Again just me, the car does look super dope tho.

    • @CanadianCruisin
      @CanadianCruisin  4 роки тому +1

      Thank you. I might have to switch it up a bit whenever I decide on some new wheels

    • @malcolmkennedy652
      @malcolmkennedy652 4 роки тому +1

      @@CanadianCruisin American Muscle makes the exact same style replica wheel but in 20". They look dope.

    • @CanadianCruisin
      @CanadianCruisin  4 роки тому

      @@malcolmkennedy652 wheels are so hard to choose. I just need 20k and ill have a set for every other week 😆

  • @corradomoncada591
    @corradomoncada591 3 роки тому +1

    Do you have the exhaust done on her aswell? From Ontario with a 2020 pp1 looking to lower and put either a borla or corsa catback. I have the active exhaust and am a bit hesitant. Any recommendations?!?! Ps. Great content I watch your video’s alot just because I can relate more being in Ontario!

  • @nickgallichan9750
    @nickgallichan9750 Рік тому +1

    When you did the lowering springs did you upgrade the camberbolts or just run the stock ones? Some say you'll need them to get back into spec and some say it's fine. Just curious so I don't have to take it apart/align it twice lol

    • @CanadianCruisin
      @CanadianCruisin  Рік тому +2

      I just did springs and the shop I went to was able to get it close enough not to wear the tires unevenly

    • @nickgallichan9750
      @nickgallichan9750 Рік тому +1

      @@CanadianCruisin Beauty, thanks brother I appreciate it

    • @CanadianCruisin
      @CanadianCruisin  Рік тому +1

      @@nickgallichan9750 no problem

  • @daleknapp7127
    @daleknapp7127 4 роки тому +3

    I have a Mustang that is identical to yours. 2019 Shadow black PP1. I’ve done a few simple mods like the lens tint,Steeda dry air filter replacement, resonator delete with a Steeda H pipe,LED interior bulbs,LED rear marker lights,JLT catch can,window tint,low profile jacking rails,I’ve got the 25 mm spacers all around with the black lugs but don’t have the Steeda springs just yet. I really like the lowered look of your car but I’ve heard they eventually start making noises so I’ve held off. You’ve had no noise issues whatsoever??

    • @CanadianCruisin
      @CanadianCruisin  4 роки тому

      Awesome. Did you feel any difference with the filter change? So far no noise but I've heard the same thing. I will keep you posted if it starts acting up

    • @daleknapp7127
      @daleknapp7127 4 роки тому +1

      @@CanadianCruisin I can’t say that I feel any difference, although they claim there is roughly a 3-5 HP gain. Believe it or not I only have 1450 miles on the car and I bought it new in April of this year. Obviously it’s a weekend warrior and sometimes it only gets out 1 weekend a month. Need to drive it more!! I’d like to put more performance mods on the car but really don’t want to throw away the warranty just yet. Oh yea, I also have a speedform throttle controller on the car which I REALLY like! It’s highly adjustable and gets rid of any lag!

    • @CanadianCruisin
      @CanadianCruisin  4 роки тому +1

      @@daleknapp7127 id say I would buy a car for the weekends but I dont have that self control haha. Id be out there everyday. Im tuning my car soon and still debating to keep the stock airbox or go with a cold air system

    • @daleknapp7127
      @daleknapp7127 4 роки тому +1

      @@CanadianCruisin from what I’ve researched the stock air boxes really do a good job and there is minimal gains if any at all from CAI. I see a lot of people saying their AIT’s are actually hotter than with a closed system. 🤷‍♂️ I do believe mine breathes better with the aftermarket filter though.

    • @CanadianCruisin
      @CanadianCruisin  4 роки тому +1

      @@daleknapp7127 yeah I've read the same. They just look so good under there

  • @kopan14
    @kopan14 Місяць тому

    maybe not good for daily drives nd long roadtrips ? I think some hard bumps would destroy both front and rear fairings fairly quickly

  • @philthypony
    @philthypony 4 роки тому +3

    So I just bought a 2020 GT and want to lower it come spring but was concerned with how it'll ride mainly in front, my list car i had Eibach Sportine springs in it and it felt/sounded like my struts were thing to blow right thru the hood at times. I was going to go with coilovers but if I can save bit get decent ride with just springs then cool i can put the saved money towards other parts, just wanted to find out if it rides rough at all with just lowering it 1.5" or whatever it drops be nice to just have no gap in fender wells also. One other thing I see you have 25mm spacers did they bring the tires out past the fender edge at all, I want my tires to sit flush with edge of fenders was told 20mm spacers would like to just buy once not have to screw around so be cool to know what you suggest for factory wheels to sit flush.

    • @CanadianCruisin
      @CanadianCruisin  4 роки тому +2

      The eibachs are a harsher ride for for sure. These steeda ones ride as smooth as factory you just gain some more stability around corners and hard launches. So far no noise or bottoming out at all. As for the spacers they do stick out just slightly in the rear but the front is flush. So I'd maybe go with the 20mm in the back if that's the look you want to get. Thanks for watching:)

    • @philthypony
      @philthypony 4 роки тому +2

      @@CanadianCruisin thanks for that info I just posted this question about suspension to do for what reasons etc. I think I'm going to just lower it with springs few people I know say they work fine in s550, I mainly just want to get rid of that gap the famous space between top of tire and fenders bottom.

    • @CanadianCruisin
      @CanadianCruisin  4 роки тому +2

      @@philthypony you'll be happy with how just lowering it can make a huge difference. No need for all the rest unless your really going to use it to its potential a lot.

    • @philthypony
      @philthypony 4 роки тому +1

      @@CanadianCruisin okay appreciate the info I've heard from couple buddies with lowered s550s that said springs work fine, I guess I'll just get some springs for it and go from their I can put money to other parts of the car saved from not getting airride. Lol

    • @philthypony
      @philthypony 4 роки тому +2

      @@CanadianCruisin awesome appreciate the info.

  • @jeremy_yyds
    @jeremy_yyds 2 роки тому +2

    Sick car man!!!!!!!!!! I have only one question: how did you solve the issue with the lugs being too long at the front for 25mm spacers? (because of the magneride suspension)

    • @CanadianCruisin
      @CanadianCruisin  2 роки тому +2

      My car doesn't have the magneride. These style of spacers won't work with it because of the lugs like you say.

    • @jeremy_yyds
      @jeremy_yyds 2 роки тому +1

      ​@@CanadianCruisin Thanks for letting me know. Keep content going man, I have been watching your channel for a long time. Even bought the Nexen winter tire based on your review; they are fantastic tires. Thanks again!

    • @CanadianCruisin
      @CanadianCruisin  2 роки тому

      @@jeremy_yyds awesome thank you. We got some snow here today but I haven't had time to swap the tires yet haha

  • @FYMM69
    @FYMM69 3 роки тому

    Any regrets having the black paint ?? Nothing sexier than black and granted I ordered race red but blacks so damn hard to keep clean

  • @g04tn4d0
    @g04tn4d0 2 роки тому

    **me, enjoying the video and a drink**
    "i did have the car airborne at one time..."
    **spits drink all over keyboard**

    • @CanadianCruisin
      @CanadianCruisin  2 роки тому

      Lmao. Note to self check the road before opening her up

  • @JR007x
    @JR007x 4 роки тому +1

    10/10 all day!

  • @dvpawlowski
    @dvpawlowski Рік тому

    just installed steeda progressives on my brothers 19 gt pp1, same inch (25mm) spacers and same stock wheels 2 weeks ago. his car sits just as low and he hasnt even driven it yet. my 18 is has bc coils waiting to be put on along with a few other things in the next few weeks. i will try to remember to record lol

    • @CanadianCruisin
      @CanadianCruisin  Рік тому +1

      I still think these give the stock wheel setup the best look for sure.

    • @dvpawlowski
      @dvpawlowski Рік тому

      @@CanadianCruisin I’m gonna be aiming for almost that exact height, I just wanted to do something a little more adjustable than the vogtlands and koni’s on my previous fusion. It handled like a train after that, rear way, bushings, and going from a 235 to a 265. But it was a daily. The mustang is only out when the snow is gone :/

  • @carmob7499
    @carmob7499 4 роки тому +4

    Lookin sick bro !! we can't wait to put our Steeda springs on Ruby ..

    • @CanadianCruisin
      @CanadianCruisin  3 роки тому +2

      I dunno how I missed this comment. Ruby will look great when she's lowered

  • @clay1022
    @clay1022 4 роки тому +1

    What good struts do u have, and, do u recommend them ?
    Thanks!
    ps. really enjoy ur videos!
    great content!

    • @CanadianCruisin
      @CanadianCruisin  4 роки тому

      The shocks and struts are just the stock ones that came on the car. Ill be switching to steeda adjustable ones eventually

    • @clay1022
      @clay1022 4 роки тому +2

      I'm sorry. Meant to ask what hood struts are u using, and, would you recommend them ? I wanna get rid of the prop rod that holds up the hood, but, have heard there's alotta cheap junk hood struts on the narket.
      Thanks

    • @CanadianCruisin
      @CanadianCruisin  4 роки тому

      @@clay1022 They are the Ford Performance struts. So far they are working like new still.

  • @batman-telephoneman5479
    @batman-telephoneman5479 3 роки тому +1

    Nice car. Anyone notice tho... How messy the mustang and camaro engine bay are? Compare to a 392. No wires and crap all over the place.

    • @CanadianCruisin
      @CanadianCruisin  3 роки тому

      I don't get why they can't hide some of the stuff a little better

  • @Ponyo3816
    @Ponyo3816 4 роки тому +2

    With the PP1. I'm just waiting to buy the FP X springs for the rear. All that she really needs.

    • @CanadianCruisin
      @CanadianCruisin  4 роки тому +1

      Yeah they don't need much to make them sit well thats for sure

    • @Ponyo3816
      @Ponyo3816 4 роки тому +1

      @@CanadianCruisin Plus getting my 1/2 high torque impact for a steal at HD. Finally have the tools to do the work. Building up my kit for track days at Laguna Seca. It's in my backyard. Like literally my backyard. lol

    • @CanadianCruisin
      @CanadianCruisin  4 роки тому

      @@Ponyo3816 im jealous. We have 1 track here that's like a 4hr drive away lol. And then our dragstrip is about 40 minutes but its been closed this whole year now. I need to invest in some power tools one day

    • @Ponyo3816
      @Ponyo3816 4 роки тому +1

      @@CanadianCruisin That's my hobby at this point. Building my track day pack so I'm ready to go when i finish up a few more credit cards and student loans on their tale end.

    • @CanadianCruisin
      @CanadianCruisin  4 роки тому

      @@Ponyo3816 im paying down the car and then a lot more fun things will be coming to the channel. Im going to have to track it one day and see how I do lol

  • @coach_t727
    @coach_t727 2 роки тому

    beautiful bro!

  • @alanb6196
    @alanb6196 3 роки тому +1

    Jesus H. Porkrind!!!
    That sidewall at 5:42......

    • @CanadianCruisin
      @CanadianCruisin  3 роки тому +1

      That's what happens when a forklift gets to close lol.

  • @JonniTwstt
    @JonniTwstt 2 роки тому +1

    You think i could run this setup with 19x10 wheel in the front? With 25mm spacers?

  • @khris1107
    @khris1107 2 роки тому

    Are you using camber bolts? What camber are you running? I am asking you that because people say that camber can't be adjusted.

    • @CanadianCruisin
      @CanadianCruisin  2 роки тому +1

      No bolts or plates on here. I don't know the exact numbers anymore but they got it pretty close to stock. No uneven wear on the tires or anything.

  • @sickactor
    @sickactor 2 роки тому +1

    Can you drop a link to your friends white mustang with magneride to see his stance? Im trying to find it. Thanks

  • @XxROCKSTARxX3
    @XxROCKSTARxX3 2 роки тому +1

    Does it scrape going over bumps? Where I work we have a couple bumps, only reason why mine is still stock height..

    • @CanadianCruisin
      @CanadianCruisin  2 роки тому

      Never. My complex had a ton of speedbumps and never hit

  • @hoonage5
    @hoonage5 2 роки тому

    How chipped is your paint getting on your rear fenders? Mine has all these very small chips and am now moving the wheels back in a little

    • @CanadianCruisin
      @CanadianCruisin  2 роки тому

      Somehow mine don't seem to get any chips back there. Mostly on my hood and bumper

  • @gilbertmontoya3005
    @gilbertmontoya3005 2 роки тому +1

    Would it work with 305 30 19 rear with one inch lowering and front with 275 30 19 with 1.25in lowering?

  • @tacdriver911
    @tacdriver911 3 роки тому +1

    I have the same brand tires but went up to 265 on front and 285 on rear. Running the same 25mm spacers too. I recently bought Eibach sport line lowering springs for a front and rear. 1.3 in the rear of 1.5 in the front. I’m worried because I went up and tire size plus the spacers I’ll have rubbing. What do you think?

    • @CanadianCruisin
      @CanadianCruisin  3 роки тому

      It's not much of a size jump but the eibachs are pretty low. It would be tight for sure

    • @soflog1410
      @soflog1410 2 роки тому +1

      Did your setup work with the bigger tire setup after adding the Eibach Sport line lowering springs?

  • @lobbyrobby
    @lobbyrobby 2 роки тому

    I have a 2020 GT pp1. In the future I want to throw on a set of bronze wheels. I'm thinking about running a squared setup tho so I can rotate them. It's confusing to what will fit and look good. With these 25mm spacers you didn't need to trim your factory studs, right. I hear with 20mm spacers the factory studs need to be trimmed.

    • @CanadianCruisin
      @CanadianCruisin  2 роки тому

      As long as the offset works a square setup should fit fine

  • @joseprado3492
    @joseprado3492 3 роки тому +1

    Hello, I'm kind of ignorant when it comes to the new mustangs, how can I tell if my 2020 gt came with magna ride?

    • @CanadianCruisin
      @CanadianCruisin  3 роки тому +3

      If you look there should be a wire connected to the shocks

  • @ericolivera7789
    @ericolivera7789 2 роки тому

    I have a question and new to my 2020 mustang gt. It has the pp1 wheels and tires. What squared set up would be great for my car? What wheels would I have to get etc.?

  • @JAG6.7
    @JAG6.7 4 роки тому +1

    I really should put 20mm spacers on my 25 on the rear are hit n miss at times

    • @CanadianCruisin
      @CanadianCruisin  4 роки тому

      My wheels are different so they fit. Yours the extra 5mm would probably help a lot

  • @sickactor
    @sickactor 2 роки тому

    I have a 2020 GT PP1 on magneride. Im planning on buying rims 20x9+35 on 275/35 all around. I also plan on getting the steeda lowering springs to drop it 1 inch. Will it fit?

    • @CanadianCruisin
      @CanadianCruisin  2 роки тому +1

      It should fit. Magneride sits a little higher than my car so will leave some room

    • @sickactor
      @sickactor 2 роки тому

      @@CanadianCruisin If I add 30MM spacers in the front for the magneride and 25MM in the back, will they still fit?

  • @Tejankang
    @Tejankang 3 роки тому +1

    I have 2 inch drop lowered springs that i want to get installed on my 2017 mustang convertible i have 275/35/r20 at front and 275/40/R20 at back so will it rub with the fender or not

    • @CanadianCruisin
      @CanadianCruisin  3 роки тому

      If i go off of my stance and how much it was lowered i would say that 2 inch would probably rub. especially over any bumps

  • @sirsams22
    @sirsams22 3 місяці тому

    What % is the tint, bro clean ride

  • @KandAshow
    @KandAshow Рік тому

    Do you scrape going into a driveway or over speed bumps now that you've lowered it?

    • @CanadianCruisin
      @CanadianCruisin  Рік тому

      Speed bumps there's no issue. Driveway depending how bad the slope is it hits the splitter if I went to fast but usually could make it in no problem

    • @KandAshow
      @KandAshow Рік тому

      @@CanadianCruisin Thanks! I've been thinking about getting some for mine. My driveway is super steep but I can get in and out of it just fine with the stock springs if I pull in at a super angle. I think I'll have to go do some measurements... Lol.

  • @durstroyer3924
    @durstroyer3924 4 місяці тому

    That front right tire sidewall look pretty mangled.

  • @FYMM69
    @FYMM69 3 роки тому +1

    With that tight of clearance how rough does the car ride with these lowering springs ?? Sharp ride btw

    • @CanadianCruisin
      @CanadianCruisin  3 роки тому +3

      It rides like stock. Feels the same just more planted around corners

  • @nature_labs
    @nature_labs 2 роки тому +1

    Hey buddy do you have a link for the 25mm spacers there are like 4 kits on their website I’m gonna probably go 255/40 19 with the spacers to make it flush.

    • @CanadianCruisin
      @CanadianCruisin  2 роки тому +1

      www.cjponyparts.com/accelatec-wheel-spacer-kit-25mm-black-with-black-chrome-oe-style-bulge-lug-nuts-mustang-v6-2015-2017-ecoboost-gt-2015-2022/p/WAK9/

    • @nature_labs
      @nature_labs 2 роки тому

      @@CanadianCruisin did you buy Quantity of 2 or does it come with 4 in the set

    • @CanadianCruisin
      @CanadianCruisin  2 роки тому +1

      @@nature_labs this one comes with all 4 plus the black lug nuts

    • @nature_labs
      @nature_labs 2 роки тому

      @@CanadianCruisin I just bought some RTR spec 7s I’m gonna stay 255 with the kit to help make it flush I also purchase some RTR tactical springs so let’s hope for the best!

    • @CanadianCruisin
      @CanadianCruisin  2 роки тому

      @Zach Sullivan I just got some new wheels. Waiting on tires so hopefully they look good still

  • @losnuevosmentadosmusic948
    @losnuevosmentadosmusic948 2 роки тому

    How u make front spacers fit did u have to cut off the excess of the lug nut for the magneride suspension

  • @l3gend2you5
    @l3gend2you5 2 роки тому

    You guys think a 1 inch poke with the back wheel will work with air suspension

  • @ghx4368
    @ghx4368 3 роки тому

    Hi, is this lowering spring model 'Eibach E10-35-029-07-22 - Pro-Kit Performance Spring'? I am also going to install Eibach lowering spring. And where did you get it?

    • @CanadianCruisin
      @CanadianCruisin  3 роки тому

      No its the steeda progressive springs. Eibach is lower

    • @ghx4368
      @ghx4368 3 роки тому

      @@CanadianCruisin ohhhh, thx. I am planning to lower my car too XD.

    • @CanadianCruisin
      @CanadianCruisin  3 роки тому

      @@ghx4368 you will be happy with either spring I think 💪

  • @Dude-tb8ry
    @Dude-tb8ry 3 роки тому +1

    How do you think the Steeda lowering springs would look with 285s on all 4?

    • @CanadianCruisin
      @CanadianCruisin  3 роки тому

      The height should be the same. The only difference would be how the tires stick out depending on the offset of everything

  • @george4u1960
    @george4u1960 3 роки тому +1

    Any other parts. Any other problems since you lowered your car with your suspension.

    • @CanadianCruisin
      @CanadianCruisin  3 роки тому

      I havent added anymore suspension stuff quite yet. So far it's all good still. No issues :)

  • @mikehoncho4948
    @mikehoncho4948 10 місяців тому

    Nice gash in the front sidewall 😂

  • @howardlee7216
    @howardlee7216 4 роки тому +1

    Your car looks great.

  • @FYMM69
    @FYMM69 3 роки тому +3

    Ya brother that stance is ideal. My Ford dealer knows I want to do a bunch of mods to mine whenever I get it. Their suggesting the Ford Performance lowering springs which supposedly give it a 1” drop. I’m not sure what the difference might be between say Steeda sports and Ford
    Any regrets going to wheel spacers because I’ve thought about going to Weld wheels

    • @CanadianCruisin
      @CanadianCruisin  3 роки тому +4

      I went with steeda because it was just slightly lower in the front than the rear but I've heard good things about Ford performance as well. Spacers have held up great. I don't even know they're on the car. Just make sure to get the good hub centric ones or they will vibrate a lot at higher speed.

  • @jasonhahn6398
    @jasonhahn6398 3 роки тому +1

    Did you add camber plates after the lowering springs?

  • @johnquintanilla4985
    @johnquintanilla4985 2 роки тому +1

    What percent are those tints ? Sick mustang !

    • @CanadianCruisin
      @CanadianCruisin  2 роки тому +1

      Thank you. I have 5%rear and small side window and 45 on the doors

    • @johnquintanilla4985
      @johnquintanilla4985 2 роки тому

      @@CanadianCruisin im from Canada aswell , how much all the windows cost you ? I have a 17 gt all black and i wanna get rid of the fishbowl looking windows haha

    • @CanadianCruisin
      @CanadianCruisin  2 роки тому +1

      @@johnquintanilla4985 it was 130 from a little shop near my house

    • @johnquintanilla4985
      @johnquintanilla4985 2 роки тому

      @@CanadianCruisin ohh thats fairly cheap!! And btw i just saw ur recent video and youre from British Columbia too!

    • @CanadianCruisin
      @CanadianCruisin  2 роки тому

      @@johnquintanilla4985 you bet. I'm in langley

  • @mavstang4145
    @mavstang4145 4 роки тому +1

    Thanks bud...im going to be getting the Steedas installed in the spring 👍 I'm in Ontario..how much am I looking to spend installed?

    • @CanadianCruisin
      @CanadianCruisin  4 роки тому +1

      I installed my own but I've heard places are charging between 250-300 bucks for install. But that's just what I hear through friends so it could be out a bit. Then the springs are another 350 canadian.

  • @Car_nage
    @Car_nage 3 роки тому +1

    What’s the inch drop is it 1 inch ? Sr performance springs ?

    • @CanadianCruisin
      @CanadianCruisin  3 роки тому

      Steeda progressive sports. It's 1 inch rear and 1.25 front.

  • @dakota8029
    @dakota8029 Рік тому

    What is the offset on the wheels you have/had on there? Thanks!

  • @vocallotus1150
    @vocallotus1150 Рік тому

    Did you get the steeda spacers ?

    • @CanadianCruisin
      @CanadianCruisin  Рік тому

      No the spacers were the 4 pack off of cjponyparts. 25mm

  • @tatsuhirosatou5513
    @tatsuhirosatou5513 Рік тому

    NonPP s550s have 235s all the way around

  • @Crowdkiller8
    @Crowdkiller8 Рік тому

    This crazy cause I tried putting 25mm spacers on the rear and they poke out way to much..

    • @CanadianCruisin
      @CanadianCruisin  Рік тому

      Stock wheels?

    • @Crowdkiller8
      @Crowdkiller8 Рік тому

      @CanadianCruisin yes i have the same wheels I put 25mm.on the front and fits nice but on the rears they poke put way to much

    • @CanadianCruisin
      @CanadianCruisin  Рік тому

      @manuelwiedmaier4420 magneride? Only other thing I can think of other than alignment could be off

  • @chrissanchez9218
    @chrissanchez9218 2 роки тому

    I need help I went to go look at a mustang performance pack 1 and noticed the front inner front tires wearing out and the rest of tire is literally new all tread it’s a 2020 is it a normal thing?

    • @CanadianCruisin
      @CanadianCruisin  2 роки тому

      The alignment is way off then

    • @chrissanchez9218
      @chrissanchez9218 2 роки тому

      @@CanadianCruisin yes just talked to them they said they’ll get me new tires and alignment for free

    • @CanadianCruisin
      @CanadianCruisin  2 роки тому

      @@chrissanchez9218 that's awesome. Good thing you checked it out

  • @nunziorose1749
    @nunziorose1749 4 роки тому +1

    Spacers are illegal in Victoria Australia 😣

    • @CanadianCruisin
      @CanadianCruisin  4 роки тому

      Really. I don't really like using them but until I finally get a new set of wheels there the next best thing

  • @johnnytran2629
    @johnnytran2629 3 роки тому +1

    How is the clearance when there is heavy snow?

    • @CanadianCruisin
      @CanadianCruisin  3 роки тому

      Well im in Vancouver so we never get tons of snow but I've made it through a foot with no issues. As long as the plow goes through before they car it's fine.

  • @johnnyjayy14
    @johnnyjayy14 4 роки тому +1

    Will the car get some euro taillights?

    • @CanadianCruisin
      @CanadianCruisin  4 роки тому +1

      It will eventually. To many things to save up for lol

  • @fran914
    @fran914 2 роки тому

    Did you get any camber from the springs ?

    • @CanadianCruisin
      @CanadianCruisin  2 роки тому

      Very little. I was able to align it without any camber plates or bolts

    • @fran914
      @fran914 2 роки тому

      @@CanadianCruisindid a tire shop align it for you without anything?

    • @CanadianCruisin
      @CanadianCruisin  2 роки тому

      @@fran914 yes I went to oktire the last time

    • @fran914
      @fran914 2 роки тому

      @@CanadianCruisin would you recommend the steeda springs or eibach springs ?

    • @fran914
      @fran914 2 роки тому

      @@CanadianCruisin kinda of in the middle of which ones to get

  • @Vexifymh
    @Vexifymh 6 місяців тому

    How do Ik if I have magna ride??

  • @jeffwahid5667
    @jeffwahid5667 6 місяців тому

    Drop the link for the spacer bro

  • @vocallotus1150
    @vocallotus1150 4 місяці тому

    Steeda progresssive sports springs

  • @juanacuna9031
    @juanacuna9031 3 роки тому

    Is that a 1" Drop in front and back?

  • @nokiaeight3303
    @nokiaeight3303 2 роки тому

    Can anyone tell me what offset the stock wheels are. Thanks

  • @CALISPEC1
    @CALISPEC1 3 роки тому +1

    I went with the Steeda 25mm spacer and springs on my magnaride car and it’s perfect 👌

    • @CanadianCruisin
      @CanadianCruisin  3 роки тому +2

      Nice. Be careful with spacers with magneride though. It looks like they work but the front tires are actually not against the hub. I have a video on it when we went to put them on my friends car.

    • @CALISPEC1
      @CALISPEC1 3 роки тому +2

      @@CanadianCruisin just went and checked and your correct, they like about a mm front being flush against the spacer! Looks like I’ll need to mill the reliefs in my front wheels slightly. Good info dude🤟
      Note; my car is a 2020 so it doesn’t appear that they’ve changed the stud lengths from the 18-19 cars.

    • @CanadianCruisin
      @CanadianCruisin  3 роки тому +2

      @@CALISPEC1 i don't know the reason but they used the gt350 hub on the magneride cars and the bolts are just slightly to long. Glad you checked it out. Some people just shave down the bolts a bit but its really up to you in the end.

    • @CALISPEC1
      @CALISPEC1 3 роки тому +2

      @@CanadianCruisin I appreciate the heads up to check it out, I had no idea. I’ve heard some “creaking” from time to time when the wheel is at full lock backing out of the driveway but I just chalked it up suspension noise from the lowering springs. I now suspect it’s from the studs binding against the wheel reliefs.

    • @CanadianCruisin
      @CanadianCruisin  3 роки тому

      @@CALISPEC1 no worries. It could be the studs scrapping a little like you said.

  • @franklindelacruzx9199
    @franklindelacruzx9199 Рік тому

    Those are the stock rims ?

  • @danielzamudio9658
    @danielzamudio9658 3 роки тому +1

    What spoiler is that ?

  • @sharoonanwar1178
    @sharoonanwar1178 2 роки тому

    How low is ur car man?

  • @saldmairi
    @saldmairi 4 роки тому +1

    She looks mean 👍🏽 🔥

  • @jennp6111
    @jennp6111 3 роки тому +1

    What if it wants to rub and your Denying it that pleasure

  • @sharoonanwar1178
    @sharoonanwar1178 3 роки тому

    How low is ur car

    • @CanadianCruisin
      @CanadianCruisin  3 роки тому

      It is dropped 1 inch on the back and 1.125 in the front

  • @fordmustang5856
    @fordmustang5856 9 місяців тому

    Lame and looks too much like stock rims

  • @JAG6.7
    @JAG6.7 4 роки тому +1

    1st

  • @MrSlickmonster6973
    @MrSlickmonster6973 3 роки тому +2

    I have a 2020 gt. It has 20" wheels. Will these springs work on it? Ir would it be too low? I also have the 25mm spacers.

    • @CanadianCruisin
      @CanadianCruisin  3 роки тому

      What sidewall is on the 20s. As long as the overall height is the same it should work. You'll gain an inch in the rim bit lose it in the sidewall

    • @MrSlickmonster6973
      @MrSlickmonster6973 3 роки тому +1

      @@CanadianCruisin my tire size is 265/35R20

    • @CanadianCruisin
      @CanadianCruisin  3 роки тому +1

      @@MrSlickmonster6973 it should work still then. I think the stance of the car between to 19s and 20s are the same so it should be able to drop the same amount

    • @MrSlickmonster6973
      @MrSlickmonster6973 3 роки тому

      What size tire do you have???

    • @MrSlickmonster6973
      @MrSlickmonster6973 3 роки тому

      How wide are the wheels???