Watch BEFORE YOU LOWER YOUR CAR!!
Вставка
- Опубліковано 10 лют 2025
- I wanted to share some information I WISH I KNEW before I lowered my 2019 Mustang GT, but its good information for lowering any car. I really hope this helps somebody out and saves them the extra trouble I had to go through.
As always, thanks for watching! Subscribe if you haven't!
Instagram: www.instagram....
#2019mustanggt
![Why you should SKIP ACTIVE EXHAUST on your MUSTANG GT [+ Ford explains TRANS LEAK at 15K miles...]](http://i.ytimg.com/vi/ZBe7AtjqTpE/mqdefault.jpg)
![Mustang GT Digital Cluster [Every menu, Option, Setting]](http://i.ytimg.com/vi/N8LJFibUUgU/mqdefault.jpg)
Helped me bro appreciate it. I knew I needed the camber plates. Even Steeda states the plates are required for all their springs and are recommended for their min drop springs. But there is def very little camber adjustment with the rear arms. So I’m making that investment up front. People don’t understand that when you lower your car you change the suspension geometry and this ultimately impacts contact patch of your tires there’s so much more to lowering your car than just putting springs on it. if you want to ensure optimal performance and get the most out of your cars handling do it right the first time invest in supporting components also. Not just the springs.
Wow I just bought the steeds ultralite ecoboost springs, & this video just popped up, looks like I’m buying camber plates too. Thanks for the videos!
There is enough rear camber adjustment for what you did, you run into alignment places either being unaware of the location of the rear camber adjusters, or not wanting to use them to make a couple of corrections. The front you definitely benefit from camber plates (will adjust caster too) if the drop is severe enough to not get back to Ford spec.
I know this is old but your alignment guy didn’t know wtf he was doing. Also you can definitely adjust for camber in the factory rear as well. Have my car about 1.5” lower with no issues.
💯 lol this guys “guy” is a dumaz lol
🙏 for this. I haven’t dropped my 19stang yet so this is very helpful.
19Stang glad it helped out man!! That’s what it’s for. Nice car by the way 😁😁
CM_Rev yes we have very good taste. My only mods are black fender emblems and ford performance hood struts. I can’t decide on springs and exhaust. Too many choices!
19Stang can’t go wrong with anything Corsa for exhaust, and Steeda for suspension! I swear by them both 😁
You could still lower your car with just springs and be fine bro just don’t go over 1 inch If you do go over 1 inch then just consider alignment plates and maybe shocks and struts
You dont NEED camber/caster plates to lower your car. However if you don't want to overstress your suspension, wear through tires unevenly and faster nor have a f*cked up alignment, then yeah camber& caster are a must whenever you mess with the geometry of stock suspension for any car.
Juliao Martin true, I guess what I meant to say was you need them if you want to do it RIGHT** haha. You can’t do it without them but like you said, you’re gonna be wearing your stuff out way faster
You have to have them to be in factory alignment specs, which he stated in the video
Every time I lower my car I regret it. Fuck up the ride, bumps kill the car, and everything makes bad noises.
I used to be in to lowering all my vehicles/bagging, I learned very fast and getting older that it’s not worth the hassle and there’s a reason they are the way they are from the factory. Now I just do exhaust and tune and leave the rest alone. A lot less stress, work and money. But I watched the CJ pony vid on lowering then and I don’t remember hearing about needing a shim kit.
Ya I’ll probably be done with it after this car haha
Thanks for the heads up! Just ordered the camber plates
Front Camber bolts might work for you mild lowering and easy to install without removing everything
Too funny in a sad way. I just installed the Steeda Ultralight Linear Springs on my new 2020 GT PP1 and once completed I noticed the massive negative camber in the rear. Mind you this is with 20" Stance wheels and a 295/35 in back and 275/35 in the front. Way to much negative camber. There is some factory adjustment in the rear upper control arm, it can slide in or out. Long story short, there is no way alignment was going to be brought back into spec, I didn't even drive it. I ended up ordering UBR adjustable rear camber arms and a pair of maximum motorsports caster/camber plates for the fronts. Also I completely ruined the left front shock strut mount torquing the Strut nut (that holds the camber plate to the strut) to the factory 76 ft. lbs. with only a 10mm wrench to hold the spinning shaft. Stripped the shaft right off and that was using a Steeda special socket for torquing the nut (10mm is not enough to hold a tiny shaft and get 76ft. lbs.). I am a stickler about torque specs. So now I just ordered new Koni's all the way around and am waiting on them. All these videos showing just installing springs might work for a little while but the factory suspension is not designed to be lowered and it will wear out quickly. You will need to buy these things at some point. So $239.00 for the springs. THEN $400.00 for the UBR camber arms, $250.00 for the caster/camber plates and another $500.00 for Koni's only because they were on sale. Now my car can be lowered the right way.... Ugh.
Good information to put out. The know it alls tell you, you don’t need anything else but maybe camber bolts, however people that do alignments will tell you exactly what your saying they told you. Good to put it out there brother. 💯% Facts
You need a better alignment tech. Mine was well in spec with the pro kit
I dropped mine 1.5 inches with eibach springs & they were able to get mine into spec no problem
You could still lower your car and be fine but you should have lowered it 1 inch. When you lower it over 1 inch then it’s ok you just need some some alignment plates and maybe some shocks and struts. So yes you can still lower it that low just know the steps that are necessary
He just needs new alignment shop i think there just tripping balls i got same thing he has but it’s perfect
Thanks, yes I was thinking about doing this.
This is why even tho I like many can swap parts out, I’d rather have someone who knows Exactly what their doing tell me what’s all involved ahead of time so no surprises afterwards.
His alignment shop was just dumb i got same springs and i fine
@@UR_AL_SHOOK_UP_21 yeah or possibly the install. Idk I don’t turn wrenches but I’ve been around enough to know that something small can cause issues
What size spacers did you have to put on? I have stock black trim 19s, I’m getting BMR lowering springs with camber kit soon and I’m concerned the fitment will be goofy
Yo! Thanks man. This is good info. I saw your last video and I’m actually going to go with the same setup. So I’m glad for this update. Something else I need to look into as well.
Peg6susGT thanks dude!! I appreciate the feedback! Definitely glad it helped out, can’t wait to see how your car looks!
Very good info. I want to drop mine, but my driveway keeps me from doing it. Thinking about moving. Lol
Dang man! Might be worth it to be able to drop your car lol
I need the link to buy all of these packages bro please 🙏
Had Ford Performance Springs put on my 2021 Ecoboost a few weeks back. And my alignment was all jacked up but they were able to get it in spec without any extra parts. But then I don't think they dropped my car by much at all.
How are you liking it so far?
@@4567playstation meh... The car got like a tiny bit lower and the handling is fine... But they squeak a lot... Basically i regret doing it.
Im going to feel stupid for asking, but do coil lovers have the same issue?
Bro same here...put steeda progressives on over weekend and got it aligned today...everyone said nah itll be fine...no...I had to have camber bolts for front but back was not doable without the kit so I'm gonna be rocking camber...fk it lol...looks cool I guess so that's a plus
I just make an appoint for lowering. This is good to know as this is my first domestic.
steeda ultralites lower the car 2" according to their website...
I have a set of steeda progressive sitting in a box in my room. My car is in storage right now. What's the difference between them and the ultra lites? Everybody is saying they have no problem getting back to factory specs with the progressives.
Good info, I plan on using the Ford handling kit.
I was going to install Steeda sport progressive lowering springs tomorrow but I guess I’m not now? Lol
I’m running eibach sportlines 1.5 in the front and 1.3, and all I bought was camber bolts and the alignment is perfect
Anthony Fernandez honestly I wish I woulda went With those. I’m kinda thinking about switching them out haha
I got steeda got camber bolts perfect...honestly i think ur alignment shop is just wack...sometimes they wanna lie to u so u have to come back spend more money
I actually. just bought the exact set up as you cant wait to install and align ,Thank you 👌🤙 eibach FTW
u just bought one pair ?
I had an Acura TL (FWD)I lowered it and alignment shop told me the same thing, I kept the camber and front tires were bald in 6 months😂
Hey! What rear spoiler is that? Looks badass
Thanks! It’s just the Performance Pack spoiler
Refers to "toe" as "heel-toe" 🤣🤣
Good to know. Thanks mate
Thanks for watching!
Thanks for sharing!
This is what I’m worried about with my PP2. Maybe one day
Don’t lower it bro. Especially since you have the magneride.
I’m looking just for a little lower and maybe some better performance as well. That wheel gap kills me.
@@4567chuck steeda offers camber bolts and camber kits for the rear
Good afternoon, I can clarify with you you used:
1) Steeda Mustang Front Adjustable Camber Bolts
2) Steeda Mustang Rear Adjustable Camber Arms
to align the camber of the front and rear.
Have you encountered problems with your manual?
Nothing serious
So? Pay a good mechanic to get it done right the first time? Rather than looking at forums and trying to figure it out along the way. Good tip.
Do you have the link to theses items?
Good advice
im looking into BMRs minimal drop springs. Drops enough without all the extra parts.
did you get them? If so hows your camber after alignment?
No sorry didn't get them
Crazy man i think that a line ment shop is not good cuz mine was on point with just camber bolts...go to a different shop
Thanks mate ✌️
Just get coilovers and take it to a good shop
So you need camber plates front and rear if you gonna lower your car?
Mr Jafs yes sir! I would 100% recommend doing them in the first place
Teflon 5.0 is that with the suspension setup you had? Or is it with every suspension?
The ONLY reason that I would lower a car is to take it on the track. Public roads are a mess (potholes, speed bumps, etc.)
Not too many people on the local level will know, want to know what your trying to achieve. Just watching UA-cam videos while helpful rarely give you the answer. Let’s face it, most are young guys making videos with no experience. Coil overs are very expensive and you still need camber plates. Also going to a good shop is invaluable. Most do OEM specs and that’s it. Expensive? You bet. Stay away from wheel spacers regardless what’s on the tube
What a whiner LMAO
So coilovers are the move instead of lowering springs?
Yes don’t waste your money, you’ll need to switch out your shocks eventually