Just pulled my flares after 6mos - beware - they rub and damage the paint. I had to use some rubbing compound to remove the lines, which unfortunately marred the finish a bit, not really noticeable but it's obvious if you look closely ... so I need to figure out what to to fix that. Flares did nothing to prevent splash of gunk/debris ... I live in NW MT and they are pretty liberal with mag chloride on the roads here, so without my splash/mud guards, all that snow/slush crap was getting thrown all over my undercarriage and TRD dual exhaust. So, I just installed some new WeatherTech mud/splash guards and put the flares on Craigslist. I won't go back to pocket flares until one of these companies incorporates mud/splash guards into them. They look nice, but are worthless IMHO. Best suited to mild climates and mostly street driving. Just my $.000002
Old fred installed these on my 2008 Tundra back in 2010. Removed them in 2015, the paint finish had a permanent line that followed the outline of the flare. Tried to polish it out no luck. Have a new Tundra now I'd never install them again. Nice looking wheels and tires.
Thanks for the tips, they don't just help those with Yota's, I just installed them on my F250 and installed Rotor tape under them using your method. They aren't perfect but will accomplish the mission and you really have to be up and close to see the rotor tape isn't a perfect line.
Thank"s, For Taking The Time Out And Sharing. It's Super Nice, Could You Please Tell Me What Type Of Rim's And Tire's You Have... And Also What Type Of Exhaust System You Running. Thank You I Greatly Appreciate Your Video.
keoki merseburgh Thank you. I have 20x9 Sota Novakane Deathmetal Black wheels with Nitto Terragrappler G2 tires in 35x12.50r20. The exhaust is a dual Borla.
jody omohundro Nice I’m sure they will look awesome. I actually ordered mine already painted. Just made it faster to install. Didn’t have to wait on them to be painted.
Gear Runner I️ run a small body shop, so I just painted them my self. In my case it is saving me some money. I️ also am adding some X-Pel clear protective film to the front edges of the back ones to help with rock chips.
I tried to put these exact ones on my 2019 Tundra SR5 last night and the plastic of on the front brackets broke when I only put a few threads through it. I contacted them this morning about sending me new brackets. Right now I just have the back flares on. I am not a very happy customer right now especially since I spent extra for them to be color matched.
Dang it......I should have watched this first!! I'm installing the OE style Bushwacker.....I just made the mistake of yanking the two plastic screw plugs out. I was wondering why they were so blaming hard to pull out, HAHA. Now, my whole is install is delayed until I go grab a couple of those at my local dealership. Probably 7.00 each LOL...
I have a 3-2 lift and I run a 35x12.50r20 tire. Not sure what the offset of the rims are they were on the truck when I bought it and they don’t make these wheels anymore
Hey Andy, I had a question about your BW Pocketed Fender Flares. Do you have a problem with the weather stripping coming off the flares? I got one that won’t stay on and it falls down behind the flare. Just wondering what I can do to fix it
Hey bud, I just installed these on my 2016 Tundra. Followed your install. Thanks, it helped a bunch. Only issue I have is the drivers side rear fender flare doesnt sit completely flush on the backside. I just dont want water to get in between. Any solutions for this?
Steven Davis Thank you and you are very welcome. Sorry I don’t have any ideas. Mine sit flush so I didn’t have to come up with a fix for that. Did you push in while tightening the screw. Other than that not sure what would cause this.
@@gearrunner thanks for responding. I tried pushing while tightening, but it didn't help. Thinking maybe the flare is a little warped. I'll have to figure something out. Maybe that double sided tape just in that spot. We'll see. Thanks again.
I need some custom/ modification advice… I just bought a 2016 Toyota Sequoia Platinum, with 33 BFG’s and a 3” lift…. I’d like to add some bushwhackers, but can’t find any to fit. Any suggestions!
Been watching your videos ever sense I got my tundra, your my favorite tundra owner to watch! Also watched your weight loss video before I even knew you had a tundra haha. You mind telling us where you got thoes fender flares? I'm thinking of getting the same ones
I actually ordered these from a shop in Bristol TN called RPM Offroad. I appreciate you watching the videos. My weight loss video has gotten me a lot of subscribers and changed a lot of lives. I’ve definitely been blessed with that video.
Kurt Hunter They do rub but they have a piece of rubber that’s in between the flare and the fender. So I’m not sure if it would damage the paint in a few years or not. But if I’m. It mistaken there was a disclaimer in the instructions about not liable for paint issues.
Victor Salinas Yes they send you a bag with all the hardware you will need to install them. It’s a very easy install once you figure out how the first one goes in.
First and foremost nice truck! Have you noticed any scratching on the paint where the rubber seal meets? I dont care what anybody says the pocket style flares look badass.
Is there a bushwacker stamp anywhere on the inside of the flares or any way to confirm authenticity? Im asking cause i got a guy trying to sell me a used set in great condition colormatched to my truck already but cant verify if they are actually bushwackers
The one way you can identify if they’re genuine Bushwacker flares, depending on the year of your truck, each flare should have a QC stamp with a part #, date and either a 2 or 3 digit number. I believe the 2015 model year and up, they have a black plastic Bushwacker label sonic-welded to the bottom of each flare.
Looks good man! I have the exact same truck! I was looking to get some flares and came across your video. Those Bushwackers look nice painted as well. I'm in the process of doing a full chrome delete. Do those decorative screws come off? Would be nice if I could replace them with black hardware...
I'm looking for ideas to make overland modifications to a Toyota Tundra CrewMax TRD Off-Road 4x4. 2010. Millage 150,000. Any suggestions?. We will use it for camping, in desert, stony roads, snow, mountain roads, occasionally a small river (but that is rare).To start I'm thinking of off-road suspension and lights, but which of the ones in the market? I want them good, but not very expensive. If I have to put a rack I would like to think of something I can get out of it, since I can not lift the truck much longer because I need to leave it on a daily basis in low parking.Surely we will not be climbing rocks.
AECVV I know a company called headlight revolution has a lot of led lights and light bar options. Maybe a 3” level if you haven’t already got just a little more clearance. As far as racks I really don’t know there. I’ve never looked at them much other than on here.
The question was probably already asked but with the 35s how much, if any, of a lift did you need? Any rubbing with the width? I have a 2016 TRD Pro with a factory lift (2 inch) and I'd like to slot the 35s in as the OMEs look small for the truck.
Shawn850 I actually have a 3 inch lift on my truck. There was some trimming involved even with that. I can not run any 35 either I have to stick with an all terrain or they will still rub. I want to go to a mud tire next so I will either need a bigger lift or go down to a 33x12.50r20. I will more than likely go down to the 33 size.
Gear Runner I think you might even be able to go to a 34 with a 3" lift. The OME is measured at 275/65/18 on my Pro which works out to 32.1 inch with plenty of room fore and aft of the tire. Not sure about how much, if any, rub there would be on any turns but width would certainly play a factor.
Highly recommend getting off Amazon some clear double side tape or 8mm paint pro tape and edge out those. I have 2016 and trading mine in for 2019. Took fender flares off and the rubber seal rubbed a line in the paint
Timothy Peterson I really don’t know if you can stop it from happening. I may try to see how hard it is to fix what ever it has done to the paint. I wanted to do the video today but it’s raining.
Gear Runner i took mine to my detail guy he used an oscillator on it.. it helped a tad but he said in order to completely remove because toyota paint is thin he would have to wet sand. Lucky for me the dealership didnt mind and traded as is. I dont want to put lines in my NEW PRO. Someone suggested putting a strip of 3M tape similar to the door edge protection so they ride on that instead of the paint.
Did u ask to have the fender painted to match? I'm confused when ordering my flares. I have same black truck color as u. But when ordering they say either matte black or smooth which 1 do I get...I want it to match
rey210rey I ordered mine from my local 4x4 shop. Not sure what company they ordered them from but it was an option to order them color matched. If you go to Bushwackers wed site it shows you are able to order them color matched also. They have a list of dealers to order from so one of them should have the color match option on their site.
Matte black and smooth is the same thing. Sometimes, customers like to order ones with a very rough texture, much like the Rhino stuff you have in your truck bed, but it’s all from plastic. It is what they usually come as with a special coating that will prevent it from chalking and from fading out in the sun.
dunrob13 It really depends on what look your looking for. If you want the tires to set even with the flares the factory tires probably won’t work. If your wanting a wider looking truck these will definitely do that.
Sean DeLong I know right! If my road wasn’t so busy I would have let him out but he usually wants to venture to close. You have to watch him like a hawk! 😂
文Classified文 It’s funny you ask that. I act did a video recently where I review the wear after 1 year. It did leave some pretty deep scratches. I have a product right now that I’m fixing to do a video on that should fix that issue. So stay tuned. Hopefully the video will be up week after next.
Ash Mcfall They are actually screws and you usually have to install everyone yourself. I don’t know how but I got lucky and all mine were already installed.
Gear Runner yeah i agree the accents on your wheels go good with the stainless rivets. My truck is the superwhite and im running all matte black accents and wheels. Im just glad i wont have to mask off the flares just to paint the rivets haha
This is a great video. Not a complicated job but watching this vid first will save folks time and frustration!! Thanks for doing it.
You are very welcome and thank you for watching
Just pulled my flares after 6mos - beware - they rub and damage the paint. I had to use some rubbing compound to remove the lines, which unfortunately marred the finish a bit, not really noticeable but it's obvious if you look closely ... so I need to figure out what to to fix that. Flares did nothing to prevent splash of gunk/debris ... I live in NW MT and they are pretty liberal with mag chloride on the roads here, so without my splash/mud guards, all that snow/slush crap was getting thrown all over my undercarriage and TRD dual exhaust. So, I just installed some new WeatherTech mud/splash guards and put the flares on Craigslist. I won't go back to pocket flares until one of these companies incorporates mud/splash guards into them. They look nice, but are worthless IMHO. Best suited to mild climates and mostly street driving. Just my $.000002
They look great with your wheel tire combo!
Sean DeLong Thank you. I thought the little round polished spots in my rims really set off the screws in the flares as well.
Old fred installed these on my 2008 Tundra back in 2010. Removed them in 2015, the paint finish had a permanent line that followed the outline of the flare. Tried to polish it out no luck. Have a new Tundra now I'd never install them again. Nice looking wheels and tires.
Fred Sausage what kind of polish did you use? I’d start with a 1500-grit sandpaper and use “Liquid Ice” polish.
Thanks for the tips, they don't just help those with Yota's, I just installed them on my F250 and installed Rotor tape under them using your method. They aren't perfect but will accomplish the mission and you really have to be up and close to see the rotor tape isn't a perfect line.
Thank you brother, after seeing you i get confidence to do my truck fenders!!🙏
Thank"s, For Taking The Time Out And Sharing. It's Super Nice, Could You Please Tell Me What Type Of Rim's And Tire's You Have... And Also What Type Of Exhaust System You Running. Thank You I Greatly Appreciate Your Video.
keoki merseburgh Thank you. I have 20x9 Sota Novakane Deathmetal Black wheels with Nitto Terragrappler G2 tires in 35x12.50r20. The exhaust is a dual Borla.
Truck looks great, I’m in the process of painting and installing some Bushwackers on my black platinum in TN.
jody omohundro Nice I’m sure they will look awesome. I actually ordered mine already painted. Just made it faster to install. Didn’t have to wait on them to be painted.
Gear Runner I️ run a small body shop, so I just painted them my self. In my case it is saving me some money. I️ also am adding some X-Pel clear protective film to the front edges of the back ones to help with rock chips.
jody omohundro That’s awesome. That will definitely save you some money.
Thank you. The brackets into the plastic holes confused me as well. Appreciate it.
You are very welcome, happy I could help
Looks sweet. I have a 2017 Tundra. All missing is fender flares it’s just they want to much money for plastic. Ehhhhh.
Asaf Farfar I totally agree with that. They are expensive.
Great video. Had a company try and charge me $600 for the flares and the install.
Thanks man..wasn’t sure what to do with those plastic push pins in front well,but now know to screw into them
Man good job 👍💯, truck looks awesome 😎
Thank you
Those look sharp with the tires & rims on there! Good choice.
OilDonkey Thank you. When I was looking at them the deciding factor was the little round polished holes in the rims. Thank you for watching.
No problem for watching - keep em up, enjoying the videos. Still waiting for my S&B to arrive too by the way (back ordered)
OilDonkey You will really like the S&B it really makes the engine sound mean. Gives it a deep growl. Pretty easy install to.
Looking forward to it!
I tried to put these exact ones on my 2019 Tundra SR5 last night and the plastic of on the front brackets broke when I only put a few threads through it. I contacted them this morning about sending me new brackets. Right now I just have the back flares on. I am not a very happy customer right now especially since I spent extra for them to be color matched.
Great job on the install. They sure look good on the truck.
Joaquin Nava Thank you. It was a lot easier than I had thought it was going to be. Thank you for watching.
Dang it......I should have watched this first!! I'm installing the OE style Bushwacker.....I just made the mistake of yanking the two plastic screw plugs out. I was wondering why they were so blaming hard to pull out, HAHA. Now, my whole is install is delayed until I go grab a couple of those at my local dealership. Probably 7.00 each LOL...
You should have used double sided 3M tape where the flares touch paint to avoid damage on paint
They look great, great video.
Looks great! Nice install. Thought about these on the Rebel.
ThrobbNation It was a very easy install. I bet they would have looked good on the Rebel.
Thanks for the video and nice Tundra!
Do you garage your truck? Or is it to tall to get in door. 🤔. Wondering since your working outside when it’s 32 degree.🤔🤨👍
I don’t have a garage
Looks good, I just put some on my 2015 Ruby Red F150. I like those rims too
Nice looking awesome, 👌🏼 I like it
But let me know about the tire spacer what size do you use?
I have a 3-2 lift and I run a 35x12.50r20 tire. Not sure what the offset of the rims are they were on the truck when I bought it and they don’t make these wheels anymore
I really like the look but how do you get them in the color of your truck? My truck is royal blue so black may look off I guess.
craigsclocks When you order them you can order them color matched to your truck 👍
I wish fender flares came standard on the tundra just like the Tacoma.
Peter Kim Me too. They look better with them in my opinion.
Mine came with cheap rubber trim with no 3M adhesive,just the push on mold kind..ordered the Bushwacker trim online to replace it though
Hey Andy, I had a question about your BW Pocketed Fender Flares. Do you have a problem with the weather stripping coming off the flares? I got one that won’t stay on and it falls down behind the flare. Just wondering what I can do to fix it
Great video,will do it myself
How much did your tires stick out before the fender flares and did the fender flares cover the whole tire
Hey bud, I just installed these on my 2016 Tundra. Followed your install. Thanks, it helped a bunch. Only issue I have is the drivers side rear fender flare doesnt sit completely flush on the backside. I just dont want water to get in between. Any solutions for this?
Steven Davis Thank you and you are very welcome. Sorry I don’t have any ideas. Mine sit flush so I didn’t have to come up with a fix for that. Did you push in while tightening the screw. Other than that not sure what would cause this.
@@gearrunner thanks for responding. I tried pushing while tightening, but it didn't help. Thinking maybe the flare is a little warped. I'll have to figure something out. Maybe that double sided tape just in that spot. We'll see. Thanks again.
Steven Davis you are welcome. Double sided tape may work or maybe the summer heat will help settle it down or possibly a combination of the two.
I need some custom/ modification advice… I just bought a 2016 Toyota Sequoia Platinum, with 33 BFG’s and a 3” lift…. I’d like to add some bushwhackers, but can’t find any to fit. Any suggestions!
Thanks so much for this explanation. They look awesome. Will definitely do them. On a side note, what size are your rims? And what's the offset?
They are 20x9 I believe and I can’t remember the offset
24:50 your truck is so fucken shiny
The astronauts on the space station called they said " Please move your vehicle out of the Sun"
Rt Harmon Got to keep it clean.
Did you get your flares already painted? From what site?
I got them from a place that went out of business but I did order them painted to match
Been watching your videos ever sense I got my tundra, your my favorite tundra owner to watch! Also watched your weight loss video before I even knew you had a tundra haha. You mind telling us where you got thoes fender flares? I'm thinking of getting the same ones
I actually ordered these from a shop in Bristol TN called RPM Offroad. I appreciate you watching the videos. My weight loss video has gotten me a lot of subscribers and changed a lot of lives. I’ve definitely been blessed with that video.
Great instructional video.
Thanks .
Louie Thank you
Nice truck good job bro
Who made these flare for Toyota that does not have a double sided tape rubber to main body for protection?
Question...do these rub on the outside fender? If you took them off in a few yrs would you see paint damage?
Kurt Hunter They do rub but they have a piece of rubber that’s in between the flare and the fender. So I’m not sure if it would damage the paint in a few years or not. But if I’m. It mistaken there was a disclaimer in the instructions about not liable for paint issues.
Kurt Hunter the won’t rub, there’s a thick edge trim that comes enough for all four fenders.
Kurt Hunter a few years?lol I got paint damage in two weeks and took them off and added double sided 3M tape where they touch the paint
Do you know of any mud flaps that will work with Bushwacker pocket style fender flares on a Tacoma?
Great video, very informative !!!
Do you have any issues with the fenders like popping out or separation from the fender? How to fix???
You are THE BEST
Thank you, and thank you for watching
I wonder if your tundra is lifted or stock with the flares installed?
Fantastic job and explanation, really appreciate it. What do you think of the other units eBay sell ? Know anyone who tried them or have you ?
Did they give you screws to replace the ones you took off from the mud flaps? Just ordered some from svcustoms great price
Victor Salinas Yes they send you a bag with all the hardware you will need to install them. It’s a very easy install once you figure out how the first one goes in.
Gear Runner great! Thanks for the response. And nice truck 🤘🏼
Victor Salinas Thank you and good luck with the install. I’m sure it will turn out great.
First and foremost nice truck! Have you noticed any scratching on the paint where the rubber seal meets? I dont care what anybody says the pocket style flares look badass.
Thank you very much
it really help . Good video. God blew you.
Those wheels looking good😊
How to stick the rubber seal? I just got mine and they don’t stay there
Is there a bushwacker stamp anywhere on the inside of the flares or any way to confirm authenticity? Im asking cause i got a guy trying to sell me a used set in great condition colormatched to my truck already but cant verify if they are actually bushwackers
Ash Mcfall I will try to look for you tomorrow but I don’t believe there were any markings on mine or at least I didn’t notice if there were.
The one way you can identify if they’re genuine Bushwacker flares, depending on the year of your truck, each flare should have a QC stamp with a part #, date and either a 2 or 3 digit number. I believe the 2015 model year and up, they have a black plastic Bushwacker label sonic-welded to the bottom of each flare.
Helpful video. Thanks!
it looks badass. great install!
Thank you
Looks good man! I have the exact same truck! I was looking to get some flares and came across your video. Those Bushwackers look nice painted as well. I'm in the process of doing a full chrome delete. Do those decorative screws come off? Would be nice if I could replace them with black hardware...
They do come off. They are just short bolts with nuts on the back.
@@gearrunner Awesome! Thanks fore hitting me back man! =]
Zachary McGrew You are very welcome 👍
@Ackj 375718 Where can I find Gear Runner fender flares? I googled them and couldn't find a photos of them. Thanks!
Where did you get the Pocket Style Flares for your Tundra and how much were they?
Mr W. I ordered them from a local shop. They were around $1,000 painted to match
I'm looking for ideas to make overland modifications to a Toyota Tundra CrewMax TRD Off-Road 4x4. 2010. Millage 150,000. Any suggestions?.
We will use it for camping, in desert, stony roads, snow, mountain roads, occasionally a small river (but that is rare).To start I'm thinking of off-road suspension and lights, but which of the ones in the market? I want them good, but not very expensive. If I have to put a rack I would like to think of something I can get out of it, since I can not lift the truck much longer because I need to leave it on a daily basis in low parking.Surely we will not be climbing rocks.
AECVV I know a company called headlight revolution has a lot of led lights and light bar options. Maybe a 3” level if you haven’t already got just a little more clearance. As far as racks I really don’t know there. I’ve never looked at them much other than on here.
Thanks.
AECVV you are very welcome 👍
ЛАЙК ЗА ВИДЕО СУПЕР 👍👍
The question was probably already asked but with the 35s how much, if any, of a lift did you need? Any rubbing with the width? I have a 2016 TRD Pro with a factory lift (2 inch) and I'd like to slot the 35s in as the OMEs look small for the truck.
Shawn850 I actually have a 3 inch lift on my truck. There was some trimming involved even with that. I can not run any 35 either I have to stick with an all terrain or they will still rub. I want to go to a mud tire next so I will either need a bigger lift or go down to a 33x12.50r20. I will more than likely go down to the 33 size.
Gear Runner I think you might even be able to go to a 34 with a 3" lift. The OME is measured at 275/65/18 on my Pro which works out to 32.1 inch with plenty of room fore and aft of the tire. Not sure about how much, if any, rub there would be on any turns but width would certainly play a factor.
Shawn850 Thank you I will have my tire guys check that out. I want to stay with a 12.50 width because of the flares.
Bro you should sing country music with that voice u have lol 😂 hey but looks good 👍🏻
Infix appliances Houston Thank you 😂😂
Was gonna say that same thing. He has a good singing voice. Musician/Singer here.
What is the thickness of them? Street Image is where I went and asked so a guy asked me what size do I want? I have no idea.
Highly recommend getting off Amazon some clear double side tape or 8mm paint pro tape and edge out those. I have 2016 and trading mine in for 2019. Took fender flares off and the rubber seal rubbed a line in the paint
Used some scratch compound and oscillator but it only masked the rub line. Only 50000 miles on them.
Timothy Peterson I’m actually fixing to do a video on what it does to your paint. 👍
Gear Runner does it have anything to do with a remedy to keep it from happening
Timothy Peterson I really don’t know if you can stop it from happening. I may try to see how hard it is to fix what ever it has done to the paint. I wanted to do the video today but it’s raining.
Gear Runner i took mine to my detail guy he used an oscillator on it.. it helped a tad but he said in order to completely remove because toyota paint is thin he would have to wet sand. Lucky for me the dealership didnt mind and traded as is. I dont want to put lines in my NEW PRO. Someone suggested putting a strip of 3M tape similar to the door edge protection so they ride on that instead of the paint.
Did u ask to have the fender painted to match? I'm confused when ordering my flares. I have same black truck color as u. But when ordering they say either matte black or smooth which 1 do I get...I want it to match
rey210rey I ordered mine from my local 4x4 shop. Not sure what company they ordered them from but it was an option to order them color matched. If you go to Bushwackers wed site it shows you are able to order them color matched also. They have a list of dealers to order from so one of them should have the color match option on their site.
Matte black and smooth is the same thing. Sometimes, customers like to order ones with a very rough texture, much like the Rhino stuff you have in your truck bed, but it’s all from plastic. It is what they usually come as with a special coating that will prevent it from chalking and from fading out in the sun.
www.bushwacker.com/bushwacker-30039-02-pocket-style-fender-flares-front -
Did your fender flairs come already painted gloss black or did you have it done?
Stinger 45 I actually ordered mine already painted to match my truck.
I honestly think you’re better off painting them yourself if you’re an automotive painter and save yourself some dough.
Thanks Andy! For the shout out
AllAboutVehicles Your welcome. Thanks for watching.
Andy my uncle has Bushwacker Pocket Style Fender flares on his 2018 Ram 1500 there an awesome product they really help for wider tires. Great vid!
AllAboutVehicles Yep they do which is why I bought them. I was getting scratches from throwing up rocks.
That sucks but you have them now and thats the issue you have with wider tires
And are those rims real beadlocks are just for show (looks)
👌👌👌
Exelent Thank you how much is thr price for that
Looks good, bud!
I still want the mudflats on the rear will it still work with flares
You made it look easy!
I have nice factory rims that came on truck would these flares look ok, or must you have oversized tires. I like my crewmax.
dunrob13 It really depends on what look your looking for. If you want the tires to set even with the flares the factory tires probably won’t work. If your wanting a wider looking truck these will definitely do that.
Gear Runner how far out do they go? 1-2 inches?
Poor buddy! He's trying to help
Sean DeLong I know right! If my road wasn’t so busy I would have let him out but he usually wants to venture to close. You have to watch him like a hawk! 😂
Awesome Video, thanks bud.
Nice truck man
Good job
Does anyone know if these promote rust like I hear and if so what can you use to seal them from dirt,water,salt etc..
文Classified文 It’s funny you ask that. I act did a video recently where I review the wear after 1 year. It did leave some pretty deep scratches. I have a product right now that I’m fixing to do a video on that should fix that issue. So stay tuned. Hopefully the video will be up week after next.
@@gearrunner thanks for the reply do you happen to have the link to that video?
文Classified文 ua-cam.com/video/_9tV8LxvQ3E/v-deo.html here is the one that shows the damage
Can the rivets be removed? Looking at this same set but want to paint the rivets black
Ash Mcfall They are actually screws and you usually have to install everyone yourself. I don’t know how but I got lucky and all mine were already installed.
Gear Runner awesome then ill just paint them then install. Thanks
Ash Mcfall I’ve seen them painted they look good. Where my wheels have polished aluminum in them I left mine stainless.
Gear Runner yeah i agree the accents on your wheels go good with the stainless rivets. My truck is the superwhite and im running all matte black accents and wheels. Im just glad i wont have to mask off the flares just to paint the rivets haha
Ash Mcfall That is a good part about them not coming in. The bad part is that they don’t come in. That’s a lot of bolts. Lol
When doing front.......turn wheel so you have more room when doing rear screws
Looks good!
P320Apex Flatty Thank you 👍
Looks good.
theAnalyst Thank you 👍
I gave tundra dude 34 a hard time for not installing his own headlights today. Said it was too cold
Sean DeLong 😂😂 To cold! I washed my truck in this weather. Just another day at the office! 😂😂
Tundra dude 34 is a waste of time watching him, he strikes me as a guy how wears gloves to do anything with his hands
tundradude34 is not a mechanic. Can't really do anything,Except talk a lot
👍🎥👍
How much can i expect to pay
Joey Few depends what style you want and if you want a full set. Usually anywhere from $300 & up. If you want them color-matched, I’d say $550+
Where you other it?
Thai Lam I’m very sorry but I’m not sure what you are asking.
Must be from the South. He has a southern drawl. I'm from Fl.
Robert Hills Jr Yep I’m from TN. I vacation in Florida 4-5 times a year though. We love Florida.
Gear Runner Southern state are you from because you have a very deep Southern accent.
whats your tire size?
35x12.50.. sorry - got it!
Thanks!!
Erik Palme Your welcome. I hope it helped. 👍
Does it fit a 2013 ?
sweetaznboi209 you can get them for a 13 but these are for 14 and up
Thanks bro , I will check it out .
Nice hands at 22:53 lol
Daniel Kohler Thanks lol
This is not easy to install. I have done mine today..
Pavement princess wannabe cowboy with a Toyota 🤣😂😁this guy is confused..
Good job.
Wayne Henson Thank you 👍