How to Replace Front CV Axle Assembly 2007-2013 Acura MDX
Вставка
- Опубліковано 5 гру 2022
- Buy Now!
New CV Axle Assembly from 1AAuto.com 1aau.to/ic/1AACV00398
This video shows you how to install a front CV axle assembly on your 2007-2013 Acura MDX. A CV axle has flexible joints. Often, these joints wear out, or seize from contaminants due to the protective boot tearing open. A worn joint is prone to breakage, or other hazards. If your vehicle needs a new CV axle, install a quality TRQ axle that is engineered to your vehicle’s specifications.
This process should be similar on the following vehicles:
2007 Acura MDX
2008 Acura MDX
2009 Acura MDX
2010 Acura MDX
2011 Acura MDX
2012 Acura MDX
2013 Acura MDX
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oaZ9/1AXAA00013
• Pry Bar 1aau.to/oH7/1AXAA00020
• 19mm Wrench 1aau.to/oKZ/1AXAA00010
• Dead Blow Hammer 1aau.to/oK3/1AXAA00091
• Bent Nose Pliers
• Ratchet 1aau.to/obeF/1AXAA00016
• Hammer 1aau.to/oK3/1AXAA00091
• Pick 1aau.to/oDT/1AXAA00037
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - Авто та транспорт
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
Great video, the only important thing you missed is to clean the rotors before installing the tire.
Great video! Straight to the point and as thorough as possible! After watching this I don’t understand how mechanics charge so much for this, you made it look really easy!!
+Derek Horton Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-TRQ
Lower ball joint boot gets shredded! Also use a stinking rubber mallet or deadblow or hammer with a block of wood to seat the snap ring. Otherwise it can come out later while driving!!!
Thank you for the excellent video.
Thank you for the very smooth video for this procedure. One of the critics below said NOT to use a pickle fork to remove the ball joint, but he didnt offer an alternative way? Isnt that what the pickle fork is made for?
excellent video thank you it was very helpful. ❤👍👍👍
great video 👍. 4:29 what type of grease did you use here, please?
@11:37 you said torque it at 181 pounds.
Now in your other video on how to torque the passenger side at 246 pounds it's quite a bit different. So what is it??
😊labor cost
Very bad advice to use pickle fork on lower ball joint. That joint is a whole unit with lower control arm. Very expensive. You will be really sorry if you mess it up. Also taking the inner joint out is not that easy. You will be a fool if you believe it, especially if you don't have a lift.