1. Change your collet and or gas lens 2. To much or not enough shielding gas 3. Wind blowing in your puddle 4. Contaminated argon bottle, very rare but it happens.
I so have to learn this technique but im finding it very hard no one to work with me at work so ive been trying what i can awesome video im just going to keep trying so far i get my suck back at the bottom the bottom is the hardest for me
Usually caused by moving too slow and/or pointing the tungsten straight in the middle of the gap instead of washing the puddle side to side. Also made worse by losing connection with filler metal and puddle. Use enough heat to make the puddle flow nicely and practice moving quick but steady with a little side to side. Don’t sit in the middle.
@christophergavitt4095 thank you I'm going to keep trying because my beads on the face look good but it's the root that's more important it's hard but with time I think I will get it I'll keep watching videos to pick up more tips and tricks thank the comment
Right... I'm sure he has the sensitivity of the lens on a higher setting, it also looks like his head is far enough back that the sensors are catching the UV... if I tried this my hood would be touching the pipe in an effort to see the puddle lol. Doesn't get much harder than that!!
On the bottom if the pipe his head is pretty close though, it would be difficult to position your head so your lens isn't flashing like crazy one would think
Miller is going for a golden name here, oh no not using selling strategies and branding at all nope that's wasn't a well done sales role play at all, with some great welding to boot. See what I did there A
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
👇WeldTube Store👇
www.weldlife.com
Highly skilled welders, props to Travis and weldtube
Travis is as good as they get
😮💨 beautiful as always! Nice work “Canadian assassins”
🔥🔥
This is excellent, very talented welder. Thanks for the video
مشكورين على جهودكم الطيبة و مبذولة من قلب وانا حاليا اتعلم وشكرا لكم علا شرحكم
The Miller dynasty had nothing to do with it, the skill of the guy with the torch in his hand rooted the pipe.
True, but when your skills get to a certain level the difference in machines becomes VERY noticeable.
Travis is something else :)
Made it look easy, I never got the hand of back feeding. I’ve only done lay wire
I have a question on the bottom. I’m getting porosity once I start adding the rod. How do you avoid getting porosity?
1. Change your collet and or gas lens
2. To much or not enough shielding gas
3. Wind blowing in your puddle
4. Contaminated argon bottle, very rare but it happens.
That's assuming your coupons are clean
How do you blindly feel the distance between the electrode and the tube?
When ya gonna put those new WeldTube chopped scoops on the website?
excellent professional
Молодцы парни, спасибо за видео
I so have to learn this technique but im finding it very hard no one to work with me at work so ive been trying what i can awesome video im just going to keep trying so far i get my suck back at the bottom the bottom is the hardest for me
Usually caused by moving too slow and/or pointing the tungsten straight in the middle of the gap instead of washing the puddle side to side. Also made worse by losing connection with filler metal and puddle. Use enough heat to make the puddle flow nicely and practice moving quick but steady with a little side to side. Don’t sit in the middle.
@christophergavitt4095 thank you I'm going to keep trying because my beads on the face look good but it's the root that's more important it's hard but with time I think I will get it I'll keep watching videos to pick up more tips and tricks thank the comment
Your a machine man ,I do my final close off at 9 o'clock ,but everyone is different 👍
How?
It doesn't get better than this. Probably one of the most difficult ways to put a root in.
Wooow for canada n woow for berta!
Good job ❤👍
Good Job
Awesome Guys ✌
One of the best that’s ever done it 😎
Good stuff
This is the best
Learning tig next semester. Can’t wait yo weld so pipe 😫🤌
Sim uma boa instrução e informações pena que a filmagem ficou muito distante deveria ter sido mais transparente na formação da raiz mais valeu 🇧🇷🙏
How in the world are you using an auto lens and looking thru the pipe?? Appreciate the lessons🤟
Right... I'm sure he has the sensitivity of the lens on a higher setting, it also looks like his head is far enough back that the sensors are catching the UV... if I tried this my hood would be touching the pipe in an effort to see the puddle lol. Doesn't get much harder than that!!
On the bottom if the pipe his head is pretty close though, it would be difficult to position your head so your lens isn't flashing like crazy one would think
good weld bro
Show essa raiz. Parabéns
مرحبا اصديقاء العمل انا شاب عمري ٢٨ اعمل في مجال الصناعة لحمام الحديد وعندى خبرة في لحام الارجون هل اجد عمل عندكم وشكرا 🧡
Wonder where Travis got his pants 😂
At 9:38 the bearded feller disappeared … today is Halloween and it scared me
Bravo
That’s when a finger rheostat comes in handy!
I couldn’t hear what the guys were saying. The music was far too loud.
Mui bien
Pin hole in side of root pass
Duro. Desde P.R
Parabéns top
Tem como mandar um blusão desses pra mim irmao
Sou seu fã
Obrigado
Brasil
Badass leather pants thats that canadian native swag
Узумительный корень 👍
Is that Travis using a auto darkening lense 🤨
👏🏿👏🏿👏🏿👏🏿
✊🏿✊🏿✊🏿 ✊🏿
And immediately the music drowns out the voice :( Maybe it's just me
In the field you dont get this perfect fits theres always some high low and on even gaps okay
man you don’t work with the right people. I am in the field almost 3 years and fitups are mostly good
@@cicicix maybe brother i Just weld it i try not to cry to much lol
Yea that’s a lot of good info but uh…..what in the actual freak is that dude wearing?
Cut the music out so you can understand what they are saying
The music makes it hard to hear what your saying
Miller is going for a golden name here, oh no not using selling strategies and branding at all nope that's wasn't a well done sales role play at all, with some great welding to boot.
See what I did there A
I think there chaps
❤
Travis your a great Welder. Just don't talk so fast.
First like and comment! 😌 do I get to be in a video? I am a welder myself! 😎
This is advanced ?
Not see arc electric starting and liquid fucion only bla bla
👍💪
😅
I’m fallen asleep
Why no mask?
Здрастуити увас не нужна работник
Very nice this video excellent #khanbiharguru