Project Oynx - Budget Roller Paint Job - Part 1 - Sanding and first coat
Вставка
- Опубліковано 15 вер 2024
- In this Project Oynx video we finally get to rolling paint on the car! I'll also cover sanding and masking too.
Following up to this there are more parts to come from the project showing the next coats and dealing with tricky areas/parts.
All videos in the series:
Introduction:
Budget Roller Paint Job - Project Oynx intro - • Budget Roller Paint Jo...
Body work prep:
Project Oynx - Part 0 The Start... - • Project Oynx - Part 0 ...
Project Oynx - Body Prep - Part 1 Dealing with rust issues - • Project Oynx - Body Pr...
Project Oynx - Body Prep - Part 2 - Dealing with stubborn rust!!! - • Project Oynx - Body Pr...
Painting :
Project Oynx - Budget Roller Paint Job - Part 1 - Sanding and first coat - • Project Oynx - Budget ...
Project Oynx - Budget Roller Paint Job - Part 2 - details and second coat - • Project Oynx - Budget ...
Project Oynx - Budget Roller Paint Job - Part 3 - Wet Sanding - • Project Oynx - Budget ...
Project Oynx - Budget Roller Paint Job - Part 4 - 3rd coat Twin Roller Style - • Project Oynx - Budget ...
Project Oynx - Budget Roller Paint Job - Part 5 - Trim Pieces - • Project Oynx - Budget ...
I’ve wet sanded my car amazing results
Can you use this method to change the color of the vehicle?
Yup but takes a lot of work to get right which I think I was part way towards.
@@CarAndMechanical so you thinn like 1ltr of paint to 500 ml white spirit or thinner ? I'm looking for top coat over the Raptor fail . Rustoleum seems okay or any industrial paint . By roller of course 🤔
Not good using white spirit to thin it out, use rustoleum thinners and get some Valspar enamel hardener from the USA on Ebay
Cheers - hopefully this helps others - tbh I did this on the tightest budget possible and there's a number of things I'd do differently now.
Sadly the car was written off (crashed into last Jan) but it was unique. I think doing it again I'd spray it with with the recommended thinners .
Gosh hope no one was hurt
Which Grit do you use for the sand paper ?
Good point Ill add an annotation when I can. I think 240 or 320 - it's not the biggest factor imo as you will layer up over it.
There is a balance between speed of work and how aggressive you want the sand too, where say on the rust fixes I could afford to go in at times with 60 grit.
CarAnd Mechanical Alright :) waiting for a "friend" to repaint the car but if he doesn't hurry I'll try it myself
Are you going to paint the panels on the inside?
+TehKaramelo yep. I actually haven't yet done this but thinking to get it done and finished off over the next week or so.
Gloss?
satin black