The COOLEST and LOWEST WPL i've ever built! LCG WPL C44

Поділитися
Вставка
  • Опубліковано 4 гру 2024
  • 100% The Coolest and Lowest WPL I've ever built! My LCG (Low Centre of Gravity) or ' Belly Dragger' WPL C44 KM performs way better than I expected, look out for more on this in the future!
    The only place to buy your WPL with confidence: www.wpl-rc.com...
    C44 KM (as seen in this video): www.wpl-rc.com...
    Quicrun 1080 (Crawler) ESC: s.click.aliexp...
    THYC RC: / thehigheryoucrawlthefu...
    SAMAX RC: / samaxrc
    Springwoods RC: / 412153970231207
    Wheels/Tyres are off of this.. but I can't find them separately:www.banggood.c...
    If you Disliked this video because you Dislike me... Click Here: www.banggood.c...
    If you enjoy the content please consider Supporting by Buying me a Coffee:
    www.buymeacoff...
    My Amazon RC Favourites: www.amazon.co....
    Copyright Free Music:
    www.epidemicso...
    filmstro.com/?...
    My UA-cam Tool: www.tubebuddy....
    Facebook: / tomleyrc
    Instagram: / tomleyrc
    Twitter: / tomleyrcgarage
    Tomley RC © 2022 Tomley Media Ltd. All rights reserved. Publication, reproduction or distribution of this film by any means whatsoever - including without limitation electronic transmission via internet or e-mail, or re-uploading existing videos & re-uploading such material on any website anywhere in the world - is strictly prohibited without the prior written consent of Tomley Media Ltd.
  • Розваги

КОМЕНТАРІ • 200

  • @loknlode
    @loknlode Рік тому +1

    I've never really been into crawlers until I've watched a couple of your videos. I think I like the scale/detail of these little ones!

  • @disciplinerc
    @disciplinerc 2 роки тому +2

    Great build! The music got me right in the feels...nicely done! 😎

  • @rcmakingtracks18
    @rcmakingtracks18 2 роки тому +6

    That's a good looking and performing truck, great job. Some nice camera work too. Well done. Thanks for sharing. John

  • @mikeupton5406
    @mikeupton5406 2 роки тому +2

    Watched going back to watch again. Really like your WPL stuff.

    • @TomleyRC
      @TomleyRC  2 роки тому +1

      Yes, it’s nice to get some WPL content up again

  • @theminiatureconstructionco4556
    @theminiatureconstructionco4556 2 роки тому +5

    The coarse looks very entertaining, loads of effort been put into it! Like the ammo / battery box, this 3D printing seems to be where it's at! 👍👍

    • @TomleyRC
      @TomleyRC  2 роки тому +1

      Cheers mate. Yeah, my first time there, will certainly go back

  • @benfred8
    @benfred8 2 роки тому +2

    Most amazing crawler course

  • @Garetschuurman7
    @Garetschuurman7 2 роки тому +2

    Happy to see another video

  • @integrityrc7356
    @integrityrc7356 2 роки тому +2

    Well done mate. 🕺💥🕺

  • @derricksazrc3411
    @derricksazrc3411 2 роки тому +1

    I love what you did with C44. What a successful transition. LCG is so much fun to tackle challenges with. That was a pleasure to watch.

    • @TomleyRC
      @TomleyRC  2 роки тому

      Yes, it’s a whole different technique… but good fun!

  • @rcplaytime
    @rcplaytime 2 роки тому +2

    awesome little truck 😀 great place 😀 👌 👍 👍

  • @partyboy16v
    @partyboy16v 2 роки тому +1

    The Super Turbo with Moog and Marty in the Background Nice!!

  • @mehimrc1314
    @mehimrc1314 2 роки тому +2

    Well done Tomley that's a wicked build and very creative transforms the original.

    • @TomleyRC
      @TomleyRC  2 роки тому

      Cheers mate… was a decent few hrs playing with other grown ups 😎🤟

  • @scottydoo46
    @scottydoo46 2 роки тому

    The couple that own and run spring woods are the nicest people too, great place

  • @DoURC
    @DoURC 2 роки тому +1

    Great video and that thing looked absolutely awesome, love it. 👍 Spring Woods looks like a great place to go too. 👍

    • @TomleyRC
      @TomleyRC  2 роки тому +1

      Yes, it’s a really nice place

  • @aspectcarl
    @aspectcarl 2 роки тому

    neat, look forward to seeing the next generation lcg 👍 I had a great time at springwood rc, really looking forward to the next visit

  • @Bradkozakandfriends1830
    @Bradkozakandfriends1830 2 роки тому

    Turned out great for two hours time. I never would have thought to run w/o springs. Worked surprisingly well. Another great video.

  • @michaeldorich4485
    @michaeldorich4485 2 роки тому

    Looks like a lot of fun and a very cool course. You crawler performed well. Thanks for sharing.

  • @micahwhite7484
    @micahwhite7484 Рік тому

    "YOU WEH ONLY SUP-OSED TO BLOW THE BLOODY DOORS OFF~~~"
    Really, really great course, and some of your best action shots I've seen yet!

  • @geraldgerhardstein2170
    @geraldgerhardstein2170 2 роки тому

    Very cool 2 hour rig !! Its amazing what you can do if you cut the nitty gritty and get down to it. Excellent video! JP

  • @GC-RC
    @GC-RC 2 роки тому +2

    That's a beautiful crawler compound. You guys across the pond have got it made when It comes to rc. I just finished a c24 lcg, capable and different. They're great to look at too! Thanks for the awesome videos! 👍🏻👍🏻

    • @TomleyRC
      @TomleyRC  2 роки тому

      We have some nice locations over here… but you do also 👌

  • @bretthastings8857
    @bretthastings8857 2 роки тому +1

    That truck is ace,have you ever been to Carnaby crawlers,they have a full rc set up,boat lake,buggy track,massive crawler setup and an area dedicated to trucks and lorrys

    • @TomleyRC
      @TomleyRC  2 роки тому +1

      Never been… but sounds really cool!

  • @VermontScaleCustoms
    @VermontScaleCustoms 2 роки тому

    Glad you made it out for the event! the C44 looks like it runs really well on the 1080.

  • @rustytoolman4912
    @rustytoolman4912 Рік тому

    Oh thats funny, I find myself groaning out loud and moving around when you rolled down the hill :) The WPL trucks sure look like a lot of fun!

  • @MrStupidpuppy
    @MrStupidpuppy Рік тому

    I absolutely love that wpl is proving to be a capable company... Their rigs have come so far so fast... My buddy and I are actually doing a build of with C24s... With a budget of $150USD, an impossible feat with many other crawlers...

  • @Mrperfectica
    @Mrperfectica 2 роки тому

    Great video love the crawling! Excellent work!

  • @Del350K4
    @Del350K4 2 роки тому +1

    Well done, Phil! It's really cool - and so's the green one.

  • @3Y3ECE
    @3Y3ECE 2 роки тому

    As a WPL fanboy im super excited to see this, as well as what you do next to it!! Great inspiration!! Great work!!

  • @fattractor9214
    @fattractor9214 2 роки тому +2

    You should do a video on the best rc cars for beginners love you work keep it up
    The Fat tractor.

    • @TomleyRC
      @TomleyRC  2 роки тому +2

      Yes, I do have some videos planned

    • @fattractor9214
      @fattractor9214 2 роки тому +1

      @@TomleyRC I’m looking for a rc rock crowler and was looking at the rock hobby Toyota Land Cruiser and have been enjoying your videos for a few weeks and have been enjoying them a lot lately
      Keep going with the good stuff
      The Fat tractor.

  • @PrinXessDime
    @PrinXessDime 2 роки тому +3

    Knowing you have a 3D printer. You should do a 3D printed hardbody for a crawler. That would be a cool video to watch.

    • @PrinXessDime
      @PrinXessDime 2 роки тому

      Silver pla so you can paint it and it’ll scratch off like real paint and show the metal body.

  • @adamginn6212
    @adamginn6212 2 роки тому +1

    You have a might car mods poster in your office nice I watch them guys alot here in Australia and seeing this video makes me want to get my wpl going

    • @TomleyRC
      @TomleyRC  2 роки тому

      Yes, love MCM… been watching them for years

  • @alantaylor353
    @alantaylor353 2 роки тому +1

    Yeah, that was very enjoyable..
    Thanks Phil mate... 👍

  • @danweiss4928
    @danweiss4928 2 роки тому +2

    I would definitely purchase one of them just for the fun factor

    • @TomleyRC
      @TomleyRC  2 роки тому

      They are decent 👌

  • @rrrccc1571
    @rrrccc1571 2 роки тому

    That looked so good on the trail!

  • @kashmurray1199
    @kashmurray1199 2 роки тому

    That was really neat. Good place to get lost. And nice music.

  • @cliffordmazzorana595
    @cliffordmazzorana595 2 роки тому +1

    Mighty car mods yeah boi!! Keep up the good work mate

  • @WCPRCModelsCraft
    @WCPRCModelsCraft 2 роки тому +1

    great trails, what a great quick build, looks awesome sitting low as hell
    performance was great and it looked like a lot of fun

    • @TomleyRC
      @TomleyRC  2 роки тому +1

      Yes, not bad for a quick build!

  • @ungratefulbastard8166
    @ungratefulbastard8166 2 роки тому

    I like this relaxing and entertaining RC video bro , thank you , Love your channel , is unique!

    • @TomleyRC
      @TomleyRC  2 роки тому

      Thank you. I tried to be a little different to the norm.

  • @sharkusd
    @sharkusd 2 роки тому +1

    Beaaauuuuuuutttttiffuuuullll 😍 what a awesome c44

  • @SpringWoodsRC
    @SpringWoodsRC 2 роки тому

    That's awesome that you just built that to come here 😊👍 awesome footage love how b,a is in there 😂 lads did a great job organising the event looking forward to next one, thanks for visiting an the shout out Phil was a pleasure to meet you😊👍

  • @vaynehowlett3091
    @vaynehowlett3091 2 роки тому

    I really enjoyed this I can't wait to see it finished

  • @chriswhite2824
    @chriswhite2824 2 роки тому +1

    No shocks pretty cool, top video again Phil 👍🏻

  • @BangForYourBuckRc
    @BangForYourBuckRc 2 роки тому

    Excellent job Phil for such a short amount of time! Your low CG
    rig looked super and performed really well. No such event like this in my neck of the woods! Such a shame!😕great video bud! Thanks for sharing!

  • @brianwoodbine2435
    @brianwoodbine2435 2 роки тому

    Love the MCM picture

  • @grrfy
    @grrfy 2 роки тому +2

    I said no spings worked suprisingly well!, now need try the same on the gmade ,thats how mine is running.Just add some tall tyres make up for the spring and height combined with ther inverted v rear damper setup it rocks😀

    • @TomleyRC
      @TomleyRC  2 роки тому

      Yes, worked very well! I need to try a cantilever set up for the rear on this I think

    • @grrfy
      @grrfy 2 роки тому

      @@TomleyRC I find inverted v look least realistic but work the best climbing and trail runs compare and contrast video mebbe?

  • @roblowrie1969
    @roblowrie1969 2 роки тому +1

    I've not ventured into the WPL world yet, but I might soon. That looks awesome after the mods. 👍🏻

    • @TomleyRC
      @TomleyRC  2 роки тому +1

      Once you get one… it gets addictive!

    • @roblowrie1969
      @roblowrie1969 2 роки тому

      @@TomleyRC having seen your collection, I can well believe that!! 😂👍🏻

  • @dansmith5218
    @dansmith5218 2 роки тому

    Love the build idea and this video 👍.

  • @dexterbeattie7884
    @dexterbeattie7884 2 роки тому +1

    I really love it..great video

  • @shadowx5648
    @shadowx5648 2 роки тому +1

    Greetings from manila. Nice video man!

  • @Wild_Buggy
    @Wild_Buggy 2 роки тому

    Looks like a competitive build, perhaps you could use the springs from pens which are very soft (maybe better than using no springs at all).

  • @TheRCScotsman
    @TheRCScotsman 2 роки тому +3

    I'd LOVE to have a go at a place like that!

    • @TomleyRC
      @TomleyRC  2 роки тому +1

      Road trip to Nottingham… 😎

    • @TheRCScotsman
      @TheRCScotsman 2 роки тому

      @@TomleyRC It might have to happen!

  • @raylansall4434
    @raylansall4434 2 роки тому +1

    Nice rig 👍🤪🤡🇨🇦😁🙌😀✌️👊😄🇨🇦🇨🇦🇨🇦👍👍👍👍👍👍👍👍👍👍👍

  • @NoLimitRC87
    @NoLimitRC87 2 роки тому +1

    Turned out awesome I might do that to my c24 haha

  • @smallscaleadventures
    @smallscaleadventures 2 роки тому +6

    Looks great doing it's thing! I was in a bit of a world of my own enjoying the trails while you and Liam were running those I'd have love to follow you guys round with the portal equipped C44 wheelbase C34.

    • @TomleyRC
      @TomleyRC  2 роки тому +1

      I’ll be there again bat some point. I was very impressed with all your rigs! I have some footage of them for the next video

    • @smallscaleadventures
      @smallscaleadventures 2 роки тому

      @@TomleyRC Cheer! I'll look forward to seeing that. I'm from way down south so not sure how often I'll be able to get up that way unfortunately.

  • @BrendonakaShanks
    @BrendonakaShanks 2 роки тому

    I own a couple of wpl rigs now. I'm enjoying them. I just like how we can get a crawler rig this cheap and still be able to get somewhere. I have a d12 and a couple of c24s.

  • @wordreet
    @wordreet 2 роки тому +2

    That performs surprisingly well, apart from the steering seeming snatchy at times.

    • @TomleyRC
      @TomleyRC  2 роки тому +1

      Yes, needs a bit of work… but very good first shake down

  • @damienparker-burgess7086
    @damienparker-burgess7086 2 роки тому +1

    Loving the a-team vid

  • @Jbzy3000
    @Jbzy3000 2 роки тому +3

    I am impressed with this thing. Lol it’s inexpensive and performs way above its weight class!!!

    • @TomleyRC
      @TomleyRC  2 роки тому

      Yes, certainly performs very well for its cost

  • @wrc_adventurehobby5242
    @wrc_adventurehobby5242 2 роки тому +1

    Very nice video friend😍👍👍

  • @GSG-lc5zm
    @GSG-lc5zm 2 роки тому +1

    Probably the same reason I take the electronics out.. I've got an up grade I mind but after waiting for the parts I have to "get" back to it.. instead I "forget" back to it lol 😉

    • @TomleyRC
      @TomleyRC  2 роки тому

      I sometimes swap them in to other projects

  • @mikebird8290
    @mikebird8290 2 роки тому +1

    Hi Phil the truck looks great 🇬🇧✌🏼

    • @TomleyRC
      @TomleyRC  2 роки тому +1

      Yes, was good fun!

  • @verycoolthings6880
    @verycoolthings6880 2 роки тому +1

    Looks awesome! Do you still have your FTX ZORRO brushless? If you do can you make a video of bashing it or taking it out on the race track, I’ve been looking to get one and wanted to see how much abuse it would take. Great video as always

    • @TomleyRC
      @TomleyRC  2 роки тому

      Yes I do still have it.. decent truck, may get it out again soon

  • @rcwreck-creation
    @rcwreck-creation 2 роки тому

    Good to see ya out at spring woods! 👍 Hope you were able to meet Paul? He’s a great guy! 👌👊

  • @that_radio_control_guy1911
    @that_radio_control_guy1911 2 роки тому

    Beautiful truck mate. I took the springs out of my wpl c24 and it drives so much better

  • @cfhcfh5916
    @cfhcfh5916 2 роки тому +1

    Has an rat rod look. Looks great!

  • @semperatis
    @semperatis 2 роки тому +2

    I was sure that the green C44KM was Liam's rig Phil.

  • @stevelamothe7402
    @stevelamothe7402 2 роки тому

    Amazing ride u gave me an idea gonna try to take my springs off on my axial scorpion gonna test the differance to see thanks !!!! It pais to look at other peoples videos rock on the crawlers!!!!

  • @CentralOhioCowboys
    @CentralOhioCowboys 2 роки тому +1

    Looks like a great place

  • @JamieKehoe85
    @JamieKehoe85 2 роки тому +1

    Good work. I was almost going to go but didnt. Wish i did now. The green c34 you were running with .. any ideas what tyres he had on? Im doing a build and they would bw perfect!

    • @TomleyRC
      @TomleyRC  2 роки тому

      That’s owned by THYC. Check his channel out, he’ll probably have some info over there 👌

  • @ryantasyo9045
    @ryantasyo9045 2 роки тому

    great run.. it looks cool too. btw, how many inches is your designated driver?

  • @daig1984
    @daig1984 2 роки тому +1

    Cool micra picture

  • @petermakeithappen8336
    @petermakeithappen8336 2 роки тому

    So I know you were pressed for time but I've seen video's on these wpl's that show you foie to get better steering. Great job otherwise I really like the build. It really shows that you doing need to spend a ton of money to have fun with a crawler

  • @garykee1
    @garykee1 2 роки тому

    damn..cool looking rig and what a place to visit and take your buggy out! wish i had something like that where i live, but the nearest place would be 4-5 hours to drive. think i'll stick to my local conservation area and stay away from doggies who might chew it all up to bits. see you in the next vid! cheers.

  • @brianargo1659
    @brianargo1659 2 роки тому +1

    Tomley, I think u out done ur self this time. It looks very cool. If u leave to top off all I would do is cut that headache rack down to the solid pease and the back of the cab down to that hight also. But if u go topless. U must get that driver a hat. Lol.. pour guy!😂! Add some 80-90mm dessert lizard shocks with no springs just oil to keep that droop and LCG. That look with the wide wheel base👍 and last thing where u notched out that bed I would go from that depth and cut straight out the back towards the back bumper so as if the whole beg is the same all the way back. But possibly keep the original bed size on the section in front of the Back wheels. I hope I explained that to where u can understand or have a visual idea of what I'm talking about. But either way. Great job! The color is perfect. I can only imagine what it would look like with some proper crawler wheels and beedlocks. I would wheel that thing daily 👍 again, very cool.

    • @TomleyRC
      @TomleyRC  2 роки тому

      Awesome ideas 😎👌

  • @MCsCreations
    @MCsCreations 2 роки тому +1

    Awesome meeting there, Tomley! 😃
    I would love to have something like that here in my area... So I just searched about Brazilian Facebook groups to join... And I found one! 😃
    With 12 members... 😂
    Anyway, stay safe there with your family! 🖖😊

    • @TomleyRC
      @TomleyRC  2 роки тому +1

      Well 12 is better than none lol

    • @MCsCreations
      @MCsCreations 2 роки тому

      @@TomleyRC oh, no doubt about that! And I joined!

  • @twain772
    @twain772 Рік тому

    As always I enjoyed your video. What 1.9 tires were those?

  • @gordiefrench5342
    @gordiefrench5342 2 роки тому

    Thank you for giving wpl some love
    Truck looks fantastic on the run you made
    The other wpl there with you looks really good
    I have a c24 but steering linkage is junk and can't seem to find a fix for it
    Any thoughts

  • @meudrone4k369
    @meudrone4k369 2 роки тому +1

    Chique hobby amigo 👍🏼🤩 🚙

  • @mikeharlow2908
    @mikeharlow2908 2 роки тому

    At 5:32 I swore I heard 8s Steve from Kevin Tolbert’s channel! 😂 That’s a cool crawler and neat event!

  • @calumflemingsrcs2213
    @calumflemingsrcs2213 2 роки тому +1

    I did that with mine the flex was great but catches on a lot of things when so low! Really nice truck though nice video👍

    • @TomleyRC
      @TomleyRC  2 роки тому +1

      Yes, you have to find the right lines!

  • @bagelking6364
    @bagelking6364 2 роки тому +1

    Isn't that a mk 1 Toyota land cruiser?? I'd love one if those ,where do you get them from??? Nice colour aswell

    • @TomleyRC
      @TomleyRC  2 роки тому +1

      Links in the description dude

  • @ElijahBradley08
    @ElijahBradley08 2 роки тому +1

    Looks good and performs well although im not sure i like the colour

  • @alanq64
    @alanq64 2 роки тому

    Is that a six-inch figure you have driving? Really like your camera shots.

  • @plops5271
    @plops5271 2 роки тому

    damn that thing looked like a real rock crawler

  • @pinkze
    @pinkze Рік тому

    pinkze he say " soo cool, I just wondered will you be featuring the new Wpl C74 ? Sorry if you mentioned it already , I think it looks awesome "

  • @mikeontherocksuk
    @mikeontherocksuk Рік тому

    Did you ever get the rear extended?

  • @aaronscharer
    @aaronscharer 2 роки тому

    I like the song. What's the name?
    And thanks for your vids.
    I enjoy them a lot along with the Rc Retro and Kevin Talbot.

  • @finthemanbehindthescreen8520
    @finthemanbehindthescreen8520 2 роки тому +2

    Tomley you may have seen me in the comments before asking the same thing which is can we have more videos and upgrades on the feiyue fy08 like body wheels/tyres and suspension

    • @NoLimitRC87
      @NoLimitRC87 2 роки тому

      What's 1 of them?

    • @finthemanbehindthescreen8520
      @finthemanbehindthescreen8520 2 роки тому +1

      @@NoLimitRC87 it's a cheap rc car and it is pretty epic it has been on the channel before.

    • @Doublejj55
      @Doublejj55 2 роки тому +1

      Go buy you own and do it yourself if you need to see it that bad

    • @TomleyRC
      @TomleyRC  2 роки тому +1

      I’ve said I may do some… but I have lots of other stuff to do first

  • @NCmountainsYouTubeChannel
    @NCmountainsYouTubeChannel 2 роки тому

    Wpl rocks, I’m really for another wpl vid 😀👍👍👍👌👌💯. I got to see some of these In WPL groups Aaron. U mite see my k-m C-34 I really enjoyed it ☀️

  • @sebas888888
    @sebas888888 2 роки тому

    Not wpl but I ride my scx 24 without springs and it does actually well too

  • @jonshneebley
    @jonshneebley 2 роки тому +1

    DUDE, YOU NEED THE INJORA DOUBLE BARREL LONG TRAVEL SHOCKS. THEY'RE CHEAP AND WORK GREAT. THEY'RE FOR THE SCX24.

    • @TomleyRC
      @TomleyRC  2 роки тому +1

      Will check them out 👌

  • @AngusFransham
    @AngusFransham 21 день тому

    Love your videos also 200th comment 🎉🎉

  • @kevingoodwin9264
    @kevingoodwin9264 2 роки тому

    Woot! WPL!

  • @ellivwiking5771
    @ellivwiking5771 2 роки тому +2

    Got a cheap mn99s, do you or anyone else know a better motor (that fits obvi) to replace the stock one with?

    • @TomleyRC
      @TomleyRC  2 роки тому +1

      You should be able to fit the 2 speed gearbox out of the WPLs in to it

  • @jakeclauson9863
    @jakeclauson9863 2 роки тому +2

    For my c24 I purchased uxcell m3 threaded rod and m3 metal ball links so I could make my own length 4 link so I could extend the wheelbase to what I needed. But I had drill and tap the axle brackets so I used a 2 in 1 drill & tap which was a easy as drilling a hole. But you will also need an m3 nut/bolt kit to mount them. Everything was available on Amazon prime, will share links if anyone wants. Also used shrink wrap to cover the unused threads. It works really well except the shocks I got don't pivot.. so I'm back with extended stock shocks for now. Anyone know of some quality 60mm oil shocks? With ball link mounts? Been thinking about trying the cantilever suspension setup that's on thingiverse..🤔

    • @mcfrog4189
      @mcfrog4189 2 роки тому

      I'd be interested in links to it all 👍

  • @ogdizzle155
    @ogdizzle155 2 роки тому +1

    I got a c14 I fit one of my d12 body's on it but not sure how I should go about upgrading the electronics I don't wanna spend a bunch but I also wanna have a little more control then I do now any suggestions what to use?

    • @TomleyRC
      @TomleyRC  2 роки тому +1

      The best thing to do is ask in one of the groups on Facebook. But the WPL Res V3 is pretty good. Or the Hobbywing 1060

  • @spiketwo666
    @spiketwo666 Рік тому

    whats the size of the figurine?

  • @jonenglish6617
    @jonenglish6617 2 роки тому

    pretty cool

  • @iatomiksi2200
    @iatomiksi2200 2 роки тому +1

    Was that an mt8 I seen?

  • @secretagb
    @secretagb 2 роки тому +1

    Where'd you get the crate model?

    • @TomleyRC
      @TomleyRC  2 роки тому +1

      Thingyverse

    • @secretagb
      @secretagb 2 роки тому

      @@TomleyRC Eww and thanks! ;)

  • @michaelcain2174
    @michaelcain2174 2 роки тому +1

    Oh I’ve only got 2 hours …. Proceeds to make magic !! Now your just showing off !! And it’s so quiet 🤯

    • @TomleyRC
      @TomleyRC  2 роки тому +1

      Haha.. yeah, the 1080 ESC with the reduction motor is super smooth!

    • @michaelcain2174
      @michaelcain2174 2 роки тому

      @@TomleyRC can we expect the MT08 video soon 🤞