After An Extreme 4x4 Trail, Hunter's Stock Jeep Wrangler Has More Damage Than We Thought!
Вставка
- Опубліковано 19 лис 2024
- Try our NEW MotorMunch jerky line! We know you'll LOVE it! Click here: motormunchjerk...
#fabrats #jeepwrangler #onxoffroad
Today we assess Hunter's stock jeep we took on the Duzy-Ershim trail for damage it incurred there! Plus, an exciting shop update! Check it out!
Make sure to follow along with us as we build and fabricate cool stuff!!
We LOVE Onx Off-Road! Get 20% by using code FABRATS-20 or click on this link:
webmap.onxmaps...
Get your own Fab Rat's Apparel Here:
www.thefabrats...
More videos you'll love:
Wrecked Jeep - New Driver - Extreme 4x4 Trail: What Could Go Wrong?!
• Wrecked Jeep - New Dri...
We're Driving This Crashed, Un-tested Jeep Where?!
• We're Driving This Cra...
Are all JEEPS this cursed?
• Are all JEEPS this cur...
This Is Stuff We Don't Want You To See! Vol.2
• This Is Stuff We Don't...
After Being Under The Water For 30 Years The Yellow Submarine Boat Has Re-emerged Better Than Ever!
• It’s Been 30 Years Sin...
We love Barnes 4x4. Check them out!
www.barnes4wd....
Check out Fab Rat's Recovery Gear by Yankum Ropes!!
yankum.com/pro...
Use coupon code FABRATS at checkout to save 10% on your order!
Follow us on Instagram: FabRats
And THE FAB RATS Facebook page: / thefabrats
For business inquiries please email us at: thefabrats@gmail.com
Shipping Address:
Fab Rats
P.O. Box 234 or General Delivery
Glendale, UT 84729
We LOVE Onx Off-Road! Get 20% by using code FABRATS20 or click on this link:
webmap.onxmaps.com/purchase/offroad/membership/?promo=fabrats20&+channels&Fab+Rats
PAUL
IS THERE AWAY THAT I CAN PUT MY 3.4L V6 TWIN TURBO ENGINE FROM MY SUV IS A FWD. WANT TO PUT THAT INTO MY REAR WHEEL DRIVE 1987 FIREBIRD THE ENGINE IS A V6. THANKS👍
I WILL HAVE TO CHANGE THE DOME ON THE 3.4L AS IT IS FUEL INJECTED AND THE V6 IN THE FIREBIRD HAS A CARBURETOR
Keep the suv and go junkyarding for a 2500 gm truck and pull the 6.0 LS and the 4L80 trans along with computer and bs and swap it all into the firbird
Dang! Paul can move very fast when the need arises... o~0
I don’t know about Utah, but discharging your drain water directly into a stream is illegal in most places. 😮
So glad to come by and see you guys. I really don't know how you get any work done with your subscribers in your shop all the time. While we visited two other sets of fans came by....crazy for a small town. It shows how much people from around the country appreciate good people and good families.
You just got yourself a new subscriber sir, I'd love to see some videos of that westy in your profile picture too. I'm a huge vw guy aswell.
Unfortunately, we made the mistake of stopping by on a Saturday afternoon - cause that was when we were in town. Saw that the march store was closed and didn't want too bother Paul in the shop, so we left and will stop back by then next time that we are in the area. But, we did see Paul and stopped at Archies for lunch.
@@toddhoffmaster6057
Grandma Lolly taking another weekend off? Paul will take care of it.
@@michaelalbert8474grandma doesn’t work weekends, the shop is closed
Paul is there any piece of equipment you can not run? You do some nice work and you couldn't ask for a better crew to work with what y'all do on this channel is definitely cool great bunch of folks doing some pretty awesome stuff love the channel and the family togetherness 👍👍
One thing Paul teaches us, things will happen, you just have to overcome the challenges and keep on smiling
Things happen.. You just have to fork out another $10k this week.. just like last week and the week before.
"You can worry a thing to Death"
Merlin Johnson
Is that what he teaches or how to disrespect n shame his mother??? 17:59
@@originalghoul3738It’s OK, his mother shames and disrespects him as well. 😊
@@originalghoul3738that’s not disrespect that’s called sarcasm and we both speak it fluently, 😂
I was expecting to see the Rat Shack starting to go up onto the rollback and Grandma Lolly come running out the door of the shack, yelling, "WAIT!!!, I was still in here"!!! lol
"Ya ain't digging if you ain't hitting something."
Truer words were never spoken.
Every single digsafe detection engineer felt a change in the force when Paul said that lol 🤣🤣🤣
You will want to put a screen on the open end of that green drain pipe. Keep critters out.
Oh they'll get in anyway.. :)
Good morning everybody and thumbs UP to Fab Rats! 👍
why does this "hello" keep disappearing?
@@JanelleVocate-Ames UA-cam is wonky and very greedy. LOL Good morning!
WONKY is right, you're too polite-I would use a little stronger words!@@richardthomas1743
@@JanelleVocate-Ames I agree !! 🤣
I have been loving your channel for the past few years. Please don’t ever change the production of the videos, it is perfect. Michelle, the style, tempo and authenticity you capture with each episode is truly perfect and not like a variety show. Keep up the good work and thanks Fab Rats!
The banter between everyone is what makes every video so entertaining to watch. I'm always laughing at something. It's just like being a spectator there watching an every day interaction take place between everyone.
Making progress
Grandma 👵is a Awesome 👌Grandma who loves to help out
Have a Great Day 👍
God Bless America 🇺🇸🙏🇺🇸
I'm so glad that Landon latched the hood back down on his side, because Hunter forgot to and that could've ended bad, lol @7:21
Grandma is awesome!! “I don’t take back everything I said” 😂🤣
I met Grandma Lolly when I visited in May this year, and might I say she is one sharp lady! I'd listen to her more boys...
Love ya Grandma!
Thanks for sharing folks!
Friday with Fab Rats!
There should be a spot on the skids of the rat shack where there’s a hole drilled for some metal bars to run through to pull the shed. I built portable shed packages for 20 years
Y'all have the best jobs in the world. You get to the shop and say, "What am I going to do today?" Paul says, "You never know!" Then he says "We're laying pipe today!!" and you say, "OK, sounds good!!" You never know what you will do at the Fab Rats shop. Great job moving the Rat Shack!!
Lots of work getting done. Grandma Lolly is a character...
Great way to end my grave shift with a fab rats video
Other than pipe going in backward...good job I guess. Note to self.. bell is always up hill. 😂😅
👌
I wondered if anyone would notice.
Grandma Lolly's famous words, "I don't take back what I said." Raising her boys and knowing the delemma of their actions at times could make for a difficult choice! All the shannagan's between them and Grandpa Sherm, I'm sure, gave her premature gray hair! The worries and excitement were always there, and as you can see, they still are! Make no mistake, she loves her family and the excitement that comes with it! Til next time, take care, and we'll see you on the next. 😊
Total respect to the FabRats team, running a business, expanding the shop, and of course ... keeping Hunter's vehicles running. That's a full plate and very entertaining. Keep up the good work!
The chairs didn't even move! Nice job. Of course it's Grandma's building! What would you do without her in that building every day?
Great progress. Poor Grandma looked like she was gonna be sick. Good job on the move. Drains look great.
Make sure you have all the right permissions and such to have a drain go in to the creek or the internet EPA warriors will have a cow on you. Looks good can’t wait to see the shop finished.
We could start a drinking game every time Paul says it will be fine just like the Bob Newhart show!
I have a heavy equipment dirt moving company and I truck I started doing years ago for drain pipe is over dig it, throw the pipe in and then sprinkle dirt in and have your ditch hands run the level as you go. Works good, good work boys
You’ve got to come out with a shirt that says “it will be fine“ 😂
Great to see the mentorship going on. That is a lost art. To have someone pass down there knowledge. Only people that get that type of treatment understand how great it is.
I like all the different repairs and projects you and your crew show us. I always learn something new with your vids. Keep it coming!
👍
Just think
Some day
The shop
And everything
Around it will be
Done, maybe ?
Thx Paul !!
I’ll be interested to see the dry garage floor next time it rains hard!
Really do enjoy having the group together, please do include Sean in more videos
Great Job Guys!
Grandma is so awesome! She's the best!
You guys are my favorite on UA-cam. So much fun to watch. Paul and Hunter are hilarious and so are the rest of you. Love it
Saw the head gasket sealer going in the Jeep. We have a saying in our shop, "Nothing is as permanent as a temporary fix." Love the channel!
Man Paul’s property is really cool! I’d build a fire pit down by the creek!
Actually, Paul was pretty mellow on the moving of the Rat Shack. I thought there would be some serious damage but no... ;-)
Even before the 4 minute mark, the editors added so much to the episode with great relative flash backs, like Hunters face at 3:27
Hello from Far North Queensland Australia at 11pm Friday night. Love everything you do and you are my inspiration for all my projects
For a stock jeep it did pretty good on the trail
Good video the Fab rats team brought a lot of things together today, Hunter's Jeep, Grandma Lolly's Shed moved onto the concrete, dug the trench for the drain, etc. Good job!
It will be great to have done full repair of the jeep some like new with paint all... instead of small fixes...
Man it's great to see that shack getting moved ,It looked horrible out front.
The blue Jackson shovels with the serrated blade are the greatest
Slap some blue devil in it Hunter , make sure it the cooling system one , i just used some of the oil sealer variant & it worked pretty good , not a permanent fix but will keep er going
Camera blister says it all about Hunter... Good man.
Hunters' boiler needs a lot of work. But the yard needs some cleaning done for new concrete slab! The drainage is a great idea. No standing water causing problems!
The best pour in head gasket sealer is Bears Tru Blu 2years in the old C-20s 350 and no problems and I haven't been nice to the old girl. I drive her like I did when I was in highschool, l like the sound she makes when that controlled fuel leak known as a Holley street dominator secondarys open up when she kicks down. And starts winding up,
Pro tip - when laying gravity drains, start laying pipe at the downstream end. If you make a pipe slope mistake, you can always reduce the pipe slope to make grade. If you blow grade when laying from the upstream end, you'll have to dig up a bunch of pipe you just backfilled. You can't dig the creek deeper. Just sayin'...
thought you were going to mention that they laid the bells down stream....usually you lay the bells up stream but that's such a short run it will live. no frost in the ground out there.
So this video explains A LOT. We were at your place two weeks ago Monday, (sorry we didn’t get to see any of the crew) Your mom said something about how you had dug up the fiber line. Lol. She kinda went off a little bit about how she warned y’all …. And…. Paul told her how familiar he was with where the fiber line was located. Since HE WAS THE ONE WHO BURIED it. Lol. It was so funny.
Now the video surfaced a couple of weeks later. Thanks for the wholesome and entertaining content! We sure enjoyed our trip to Utah to see the eclipse. Including ROAM Adventures. Thanks for that pro vacation tip!
Love the trust Grandma Lolly had in all. LOL. Great video
Eating Beaver Nuggets and watching Fab Rats....what could be better?
Paul, as a suggestion.. mark on the wall where your power, water, internet etc lines come from the front of the property.. just a coloured marker or spray paint can mark either on the outside or inside wall of the sheds, that way you will always know what direction and where the cables and pipes are and go...
I did this years ago at my place and it is quick and easy to know when I need to dig more trenches or holes.. etc..
Your workshop is coming along nicely.. keep up the great videos and work you are doing... I love your videos and what you do... Hi from Melbourne Australia Tim.
Or maybe a mark in the fresh concrete.
The v6 has a thermostat failure and usually have to replace the thermostat and housing. The other common failure is the oiler cooler unit.
I'm surprised you didn't just put a long channel drain across the front instead of using catch basins.
Essentially the same thing-- this way it's easier clean out.. Only a few catch cans instead of an entire trough. They'll just have to shape the concrete a bit to direct the flow on the surface
Was thinking about head gaskets when I got in the rental last Saturday, started it up, and it farted and threw a check engine light immediately. Thought about head gaskets a lot over the week as it smelled like oil at the front and coolant at the back.
It would be good if Onyx was available in Australia
It's good to see more progress happening with the buildings that house all of the make-it, build-it, fix-it antics...I mean the activities...of the Fab Rats crew, family and friends. The "Cox Compound" is going to be impressively set up to get multiple things worked on at the same time here shortly. 👍💪😎
Paul, moving the rat shack looked way more professional than Rory moving any of his buildings 😂
Hunter is such comic relief: "the camera gave me a blister already!"
LOL
Hunter is pretty darn funny...he comes up with some pretty good comments and hilarious questions for Paul and Sean and he delivers them in a fairly deadpan, low-key way most of the time, which makes them even funnier.
I love the Campbell's soup can sound when the rock sliders hit the ground.
Thank you for another great story and a lot of fun. It'll be fine. Every young person needs to learn about what it means to have a blown head gasket (and keep driving the car) - I've been there!
Love seeing #FabRats Progression...I've been waiting to see some of the shop build...Love seeing it Paul!! Looks great!
I think Hunters Jeep is going to need a MAJOR rebuild!! LOL!! The new shop is progressing very well. I think that drain system in the drive is a pretty good idea. Should keep a lot of the water away from the doors without making a mud puddle in the drive. Good job!! Only got the internet and not the water or sewer!! EXCELLENT!!!
Frish masters hey I just had a fab rats bugger it was awesome nice people awesome place
Stay in an apple valley it's beautiful up here
I know you all are going to really enjoy the new shop and the much less cramped work space. Lots of hard work now will be useful for years.
You have a 4 bay shop and Hunter has to work in the dirt 😂
Paul you already knew that Grandma was in charge, she just needs to remind you now and then.
If it blows the block tester out of the radiator a foot in the air and change four different colors, does it still mean that the head gasket is bad or what.
Very nice job guys. Can't wait to see more updates an projects and many more videos soon my friends. Keep up the great craftsmanship and hard work my friends. Fab On. Weld On. Keep making God bless.
Lag eye bolts in the end of the skids under those shacks make them easier to drag around.
Hopefully that drain system only gets rain runoff. EPA would have a field day if toxic chemicals get into that creek. Hunters jeep will need a turbo for that ls. Just for fun
Next time you want to move the Rat Shack: 2x4s on the rollback, covered in dish soap. It's slippery and allows it to slide over the wood.
Hey, just like you can’t make an axle for the Toyota out of a paper clip. That drain box is not big enough do you look at the driveway and see how much water is coming? You need at least a 12 inch pipe and you need probably 10 inch pick ups Every 20 feet
you need a trench in front of the gate ! no water in the shop....
Next time you need to move the shack, lift it up and put some pieces of pipe underneath or that DOM for cages and pull it with the digger and just throw the pipes in-front of it once one rolls out the rear!
Fab Rats just GETS.WORK.DONE! Love it!
I'm looking forward to seeing the gradual build of Hunter's jeep. I think having a personalized license plate of "ITS FINE" would be perfect.
Paul, you need a better cable for your internet. I would put an inch water line in so it's protected I have been a telephone man for 44 years and still going. Make sure you do it before you pour. Great work guys.
"We all know how Paul moves things" probably the best comment of the episode 😂
Great vid!! I am just in love with Hunter's giggle and his wit!!
When putting in cables or pipes, if you put a layer of gravel over it before covering with dirt you will hit the gravel before the pipe or cable and know you have something below . Good luck and the workshop is looking great, 👍
sometimes I get distracted. I look up, Hunter’s jeep has a bad head gasket. I look up, Paul’s hauling a house onto a trailer. my brain: well, can’t wait to see how this fixes that gasket.
Have you ever used dividing rods? They will locate anything that runs underground. Water,power, or even internet! Lol
Hunter, ‘we don’t have 4WD… yup, that’s all she’s got… we’ll have to fix that’
I know I’ve heard those same words before. Hunter has become a full fledged member of the Fab Rats crew!
How many critters run out when you all lifted the rat shack?
Love watching the improvements around the shop ! Thanks for sharing !
A bottle of fix it is always worth a shot. I'm going to add some lucas to an Impala that has a rod chatter on start up. I have used all their products before and with good luck. I hope I have better luck than Paul did with Hunter's jeep. The shop is looking better every week. I don't care how big you build them it's never big enough.
You’ve never seen anybody repo a shed come on you need to use the rollback throw a couple straps around the back so that the hooks are on it and pull it up
You guys are fun to watch . Those drains should help a lot .
You should build a low deck trailer Fram for the rat shack for easier moving
L.M.A.O.( Rock sliders ) they sounded like exhaust tubing when Hunter chucked it !😂
Maybe old news, but I am dropping a note on all my favorite car sites: when finding a locked engine, check that the starter isn't stuck against the flywheel. I have had both automatic and standard fool me into thinking the engine was seized!
Try k-seal on the jeep for the head gasket it only takes 3-5 minutes to work
I like the leaf litter baskets in the stormwater pits.
O' sorry that the head gasket emergency sealant bottle didn't work in Hunters Jeep.
🌏🇭🇲
Put a 4200 l6 from trailblazer it there a better fit than a ls way more power and trq than 3.6 the 4.2 uses same computer as ls its easy to put jeep t case on it its all aluminum there a great choice for jeep swap
They don't make them like they use to.
Does Hunter need an LS ? Or you wanting continuous video content? 😂😂😂, Hunter is a good man
Those jeeps are guttless turds, coudnt barely make it up that hill, definately needs an LS.
Moving the Rat Shack went without a hitch. Nice job boys! Grandma Lolly with her " i don't take anything i said back" Classic! Man, those chicken burritos looked great. Would love to eat a lot of her cooking! Well done,! 🤠🧑🦰🌲🌲 🎼
One thing you should check is the frost depth during the winter, for example, montana State is ~ 40", Washington / Oregon is like 10" If not buried under frost depth it will freeze and plug it up, or breaking pipe.