Salinity Testing 2.0

Поділитися
Вставка
  • Опубліковано 21 сер 2024
  • I am redoing my salinity tester video taking all of your comments in mind. Let’s get to the bottom of this.
    Previous video: Surprising Results When Testing Refractometers - Hanna, Milwaukee, Sybon and more • Surprising Results Whe...
    Website: treasurecorals...
    Etsy Store: www.etsy.com/c...
    Aquarium Details: aquaticlog.com...
    Instagram: / treasurecorals

КОМЕНТАРІ • 35

  • @xxKILLBOTxx2537
    @xxKILLBOTxx2537 2 роки тому +8

    You have to turn the Hanna salinity in circles underwater to get the air out of it. Then allow it to stabilize just like you were taking a thermometer reading…

    • @hjoore
      @hjoore 2 роки тому +2

      I also just got the hanna, tested reference solution in a drinking glass and noticed air bubbles forming on one of the graphite sensor which lowered the salinity until the bubble releases and suddenly salinity shot up. This process repeated itself. If this is normal, I can imagine you have to keep the tester moving to get good results

    • @TreasureCorals
      @TreasureCorals  2 роки тому +1

      Very strange, I don' think I've observed this.

    • @TreasureCorals
      @TreasureCorals  2 роки тому +1

      Thanks, I'll give it a try. Appreciate your suggestion.

  • @carmenrobinton8463
    @carmenrobinton8463 2 роки тому +3

    Purchased a laboratory grade glass hydrometer. I've been using it for about 4 years accurate and fast! Totally happy with it.

  • @insectkiller2005
    @insectkiller2005 2 роки тому +2

    Had all of these and best i use now is the Tropic Marin hydrometer .

  • @1026782658
    @1026782658 2 роки тому +1

    Great job Demetri (hopefully spelled that right).

  • @juliafitness
    @juliafitness 2 роки тому +1

    Great video!

  • @superdave-ff8lk
    @superdave-ff8lk 2 роки тому

    On the Hanna handheld you're supposed to tap it when you're in the calibration solution so there is no air bubbles. You're also supposed to put it in the water shake it and then re put it in the water when you're testing the water so there's also no air bubbles.

    • @TreasureCorals
      @TreasureCorals  2 роки тому

      Fair point, appreciate your insight. Will try that next time.

  • @stellarlivingstoned
    @stellarlivingstoned Рік тому +1

    Good job

  • @aquaticnstuff7666
    @aquaticnstuff7666 2 роки тому +5

    just got a glass tropic marin hydrometer because I'm not trusting refractometers at the moment (specific gravity)

  • @vladimirr7653
    @vladimirr7653 2 роки тому +2

    Дима, спасибо за видос. Все как всегда на высоте! Очень полезно и информативно получилось. Я вот буквально пару дней получил hydrometer и очень им доволен. Некий золотой стандарт. Правда мерять немного геморно получается. Что скажешь о пробнике от Apex контролера? В моем случае он завышал аж на три единицы (ppm), что мне кажется критично. Хотя делал калибровку и проверял на предмет «завоздушивания» самого пробника. Не уж то ли бесполезная функция…

    • @TreasureCorals
      @TreasureCorals  2 роки тому +1

      я с этим Апексом боролся тоже - там принцип, как и у Ханны - иногда работает, иногда нет, и вот это занижение или завышение не постоянно - как мы уже убедились, у меня он стоит на аквариуме, но я за ним не слежу и ему не доверяю особо - он хорош просто показать, когда совсем что-то не туда пошло. Хотя у моего приятеля он работает не плохо. Да, и еще там очень важно где находится пробник и даже где проходит сам кабель, потому что помехи могут на него влиять.

  • @dobermanguy9437
    @dobermanguy9437 2 роки тому +1

    I hear a lot of people say the cybon is good holds calibration I also have the Milwaukee you should put 3 drops of water on the cybon anyway ice video

  • @solarchuva7042
    @solarchuva7042 Рік тому

    Everybody must read the specs and understand the precision and accuracy of each measurement instrument. It is impossible to compare apple with orange. The calibration reference has an accuracy, the instrument another accuracy and we are bias with what result we want to have.

    • @TreasureCorals
      @TreasureCorals  Рік тому +1

      Agreed, but in the end - I want a way to just check my salinity and know that it is in a good range.

  • @Reefahholic
    @Reefahholic 2 роки тому +1

    I find my Milwaukee to be quite accurate and Milwaukee pH monitors and controllers are far superior to Pinpoint. I threw my Pinpoint's in the trash.

    • @TreasureCorals
      @TreasureCorals  2 роки тому +1

      I've learned that the tick with Milwaukee is to give it at least 30 seconds before taking the actual measurement.

    • @Reefahholic
      @Reefahholic 2 роки тому

      @@TreasureCorals Never tired that, I’ll give it a go.

  • @federicomanglavite9897
    @federicomanglavite9897 2 роки тому +1

    which digital refractometer would you recommend? Hanna or Milwaukee?

    • @TreasureCorals
      @TreasureCorals  2 роки тому

      Hanna for sure

    • @federicomanglavite9897
      @federicomanglavite9897 2 роки тому

      @@TreasureCorals how come? I thought u said the milwaukee is spot on if you wait for one min.

    • @TreasureCorals
      @TreasureCorals  2 роки тому

      @@federicomanglavite9897 correct, and with Hanna digital I did not have to wait at all

  • @xisotopex
    @xisotopex 7 місяців тому

    consistency is more important than accuracy. this isnt building an airplane.

  • @steveplays5408
    @steveplays5408 2 роки тому

    Why didiny you test with a glass hydrometer also?

    • @TreasureCorals
      @TreasureCorals  2 роки тому

      I don't have one, but am in the market for one.

    • @steveplays5408
      @steveplays5408 2 роки тому

      @@TreasureCorals candy corals had them

    • @TreasureCorals
      @TreasureCorals  2 роки тому

      @@steveplays5408 I'll pay Afnan a visit then