You said " don't turn on your headlights with the protective film on because it would melt"...then you test the lights with the protective film attached lol. Either way, good video bro, now I got an idea how I want to install mine.
Thanks bro !!!this makes everything much easier and cleaner . I was trying to wire those same headlights in a whole different way but didn’t work . I tried your method and worked right away 🔥🙏🏽💯
anyone else having a problem where the headlights face too high up? i can’t figure out why and whenever i lock my headlights in place it feels tight and there’s a big gap between the headlight and bumper
can someone please help me ? i understand i need to connect white to ground and black to 12v but what are those blue things? how do i connect this ? i dont understand
@@MarioZermeno indeed. Most people say do a retro but never owned them. They are so good with hid bulbs doing a retro makes no sense. Hopefully the projector you swap it with is an oem hid projector like a s2000 or tl or something from Stanley kioto. Morimoto units are ok but mini h1 will not be better than whatever depo put in there
I cut off my drl sockets (i put blinkers) can I wire this to the drl wires? Where I cut the sockets off? I just want them light up during the day, not at night or all the time.
Mine snap out the bottoms left turn signal in cracked you know where I can get another want new or use mine is a smoke or you have a friend the sell them in separately?
Btw, I figured out if instead of turning the socket clockwise , turn it counterclockwise and it will lock on better so I don’t have that problem anymore. But still a issue that needs to be fixed
So i did the same exact thing you did and only thing that works for them to turn on is by tapping into the blinker, idk wtf is going on but im probably gonna try to return these pos headlights
I would give it one more shot.they are awesome headlights. Test them to the battery first. Then if possible use a test light to find the best power wire that turns off with the truck
Okay so I went to to see your old video when you installed your diy led strip and seen how you hooked them up but that really just showed how you got power the the bumper lights how did you get power to the headlights the same way?
I think start with rechecking connections on them if not then grab your voltmeter and make sure their getting 12v and if they are and not working then I think contacting the sellers
Hmm, I haven’t ran across a wiring problem like that. For you I would take your DLR wires and tie them into your fog lights or corner lights. If that don’t work just tap them in with your headlights
Sounds like you ran it into the automatic DRL circuit, rather then the park light circuits like in the video, makes it so that when the headlights come on the DRL goes off. Default behavior for this style of vehicle. Wire them into your turn signals rather then the DRL
They are HID bulbs. If you don’t know about HID it’s a whole different animal.(maintenance wise) But they are 6K OPT7 brand which are Discontinued. But there are a few other brands that offer them.
Most of the reviews on amazon are bad for these housings. Poor quality for the price. This video should be about blasting the poor quality for the money. Bad fit and now your getting moisture in your bumper lights. You should've got your money back.
Curious question did you ever get pulled over or got a fix it ticket for having those? Because I'm thinking of getting these aswell but with the orange amber turn signal
I got lights just like these and I tapped the headlight tube lights into the parking lights, and the parking light tubes as blinkers. My headlight parking lights will stay on for about 20 mins and then they blow their 10amp fuse?? There isn't any short that I can find, and the truck's electrical system Isn't acting funny either. Literally everything works fine until about 20 mins and then the fuse blows
Good video man. I’m new to the channel. I subscribed hoping for more awesome content. Lee up the good work. How did you get the fog lights mine are rectangle ish. I like the round look
Thanks for the sub man, hopefully you’ll find something new to do on your truck. So it’s a valance switch out off a Chevy Tahoe Z71 and they have the round fog lights
You did all of that and didn't turn on the turn signal once you installed them geeech you could of at least let us see what the turn signal looks like once you were done!!!
Just wired mine up and the issues I had were that the High beam bulb didn’t fit and the signal light bulb didn’t fit either. But I’ll give it an 9/10 ima see if the bar LED’s last long
@@David-gn3tq I got rid of them tbh not worth the money. They looked awesome but on the bumper lights they weren’t sealed properly and so humidity got into them and messed up the LED
You said " don't turn on your headlights with the protective film on because it would melt"...then you test the lights with the protective film attached lol. Either way, good video bro, now I got an idea how I want to install mine.
bro fr lmao
Bro if you look right his light bulbs not connected 💪🏾
That's with halogen or HIDs because those produce heat unlike LEDs
Cool thanks
Thanks a lot bro I got this done in about 15 minutes with your simple instructions.
Vete alv weird flex bro
Thanks bro !!!this makes everything much easier and cleaner . I was trying to wire those same headlights in a whole different way but didn’t work . I tried your method and worked right away 🔥🙏🏽💯
Thanks!! Glad I could help
What connectors you use?
I cant tell you how much this helps bro thanks so much 🙏
Good stuff brother just installed mine using your video nice and simple used blue for the led switchback when the turn signals are used
Appreciate you recording it man
How do you get the DRL’s to stay on?
anyone else having a problem where the headlights face too high up? i can’t figure out why and whenever i lock my headlights in place it feels tight and there’s a big gap between the headlight and bumper
Yeah same issue I'm having.did you fix it? If so how please do share.
can someone please help me ? i understand i need to connect white to ground and black to 12v but what are those blue things? how do i connect this ? i dont understand
Dude awesome video, I was trying to change my lights without paying and arm and leg.💯💯💯💯
Those depo projectors are actually the best headlights far as not doing a retrofit for that truck/suv
Agree. I personally feel those are underrated.
@@MarioZermeno indeed. Most people say do a retro but never owned them. They are so good with hid bulbs doing a retro makes no sense. Hopefully the projector you swap it with is an oem hid projector like a s2000 or tl or something from Stanley kioto. Morimoto units are ok but mini h1 will not be better than whatever depo put in there
how did you get the DRLs to stay on all day using this method?
How did ya fix the headlight alignment, no matter what I adjust I cannot get the massive gap under the top right headlight to go away
How did you fix it? I'm having trouble getting the lights level
I cut off my drl sockets (i put blinkers) can I wire this to the drl wires? Where I cut the sockets off?
I just want them light up during the day, not at night or all the time.
So top and bottom light white wire go to the brown and black go to the black ground next to it?
You should seal them up to avoid water. You got my follow ✌👍
How do you seal them bro what do you use
Martin Martinez clear silicone
Was thinking the same... im looking into thess.
Hey, how did you get the turn signal bulb socket to stay in place??
Mine snap out the bottoms left turn signal in cracked you know where I can get another want new or use mine is a smoke or you have a friend the sell them in separately?
Do u still need the dlr light bulbs or would they work without em
Can you tell me the part number for the male spade connectors I can’t find them anywhere for the 22-18 GA
Think you bro that help me did have a test ligth but have one now
My corner lights are the same way on the bumper lights. Super loose.
Btw, I figured out if instead of turning the socket clockwise , turn it counterclockwise and it will lock on better so I don’t have that problem anymore. But still a issue that needs to be fixed
How do u get your DRL to turn on all the time. My 02 silverado only turn on in drive I like how there all on.
So i did the same exact thing you did and only thing that works for them to turn on is by tapping into the blinker, idk wtf is going on but im probably gonna try to return these pos headlights
I would give it one more shot.they are awesome headlights. Test them to the battery first. Then if possible use a test light to find the best power wire that turns off with the truck
So what Wire does I hook up to tha Brown Wire either tha Black or White Wire
what bulbs do you use ?
Installed thes in my buddy truck a few months back but didn't know how to wire the parking lights jst took them out and just ran smoke headlights
Hopefully the video helped
Does anyone know what to do if my headlight housing is loose??
Them the blacked ones or smoked ones
Okay so I went to to see your old video when you installed your diy led strip and seen how you hooked them up but that really just showed how you got power the the bumper lights how did you get power to the headlights the same way?
I bought the exact same head lights but the tube light doesn’t turn off when I turn off my truck, what do I do?
Connect lights, to DRL’s just like I did in the video
anyone know where i can find led white corner lights?
Good video they look sick👍💯💯💯
Looks sick
i have an 01 silverado 2500hd and i have the same lights and i wired them up and they all worked then they just stopped working. what should i do
I think start with rechecking connections on them if not then grab your voltmeter and make sure their getting 12v and if they are and not working then I think contacting the sellers
I have an 2002 2500hd. Did yours fit well I just ordered the same headlights
How’d you get the drl to stay running all the time ?
I’ll be making a video on that shortly, I just gotta find a truck to do it on.thanks
Do it on mine. Lol I just got this lights bro & trying to install them now.
Would there be a problem if exposed to water?
Liked the headlights but your definitely not a speaker. You were mumbled.
Do you have to cut wire in order to tap in for the DRL lights
I mean you just have to “Tap” Into the wires to get DLR’s that turn on and off with the truck. Unless you wanna run hot to a switch and a ground
How did u get your highbeams and lowbeams on at the same time
I was thinking the same thing cuz when I turn on my high beam my low beams goes out
Its called a 4 high mod
What size resistors would you recommend
I touched the wires while the lights where on and now my lights won’t turn on
Check your fuses.
I installed mine and they work fine but everyone I use the turn signal it blinks very quick, what do I do?
Sounds like you need load resistors
U don't need a load resistor. They make a led blinker relay. Find out wat type of relay u have for your blinkers and swap it with a led one
Did you have any problems with the new headlights being not as bright as the ones before?
Yes it had a wide light spread pattern. But I got use to it. The Depo headlights are the brightest ones you can get that look decent
What led you used for you’re fog lights?
Do these fit in 2002 gmc sierra?
I wired mine exactly like u did but my Drl bar turns off when my headlights go on u what u think my problem is
Hmm, I haven’t ran across a wiring problem like that. For you I would take your DLR wires and tie them into your fog lights or corner lights. If that don’t work just tap them in with your headlights
Thanks one more question what led headlight bulbs u running
Sounds like you ran it into the automatic DRL circuit, rather then the park light circuits like in the video, makes it so that when the headlights come on the DRL goes off. Default behavior for this style of vehicle. Wire them into your turn signals rather then the DRL
Now do those headlights come that bright? Or did you buy the bulbs separately? Because if so where did you get the bulbs?
They are HID bulbs. If you don’t know about HID it’s a whole different animal.(maintenance wise) But they are 6K OPT7 brand which are Discontinued. But there are a few other brands that offer them.
What you recommend for 2002 Silverado high beam lights?
If you can deal with with headache of HIDs then those but LEDs are nice too
Most of the reviews on amazon are bad for these housings. Poor quality for the price. This video should be about blasting the poor quality for the money. Bad fit and now your getting moisture in your bumper lights. You should've got your money back.
Idk if it’s every other housing that has issues but I guess I got the good set of housings. I’ll make a update review on it
@@MarioZermeno Idk !!? I bought a pair of these lights and they are fitting extremely loose and flimsy .
How do you adjust them up and down?
Curious question did you ever get pulled over or got a fix it ticket for having those? Because I'm thinking of getting these aswell but with the orange amber turn signal
I live in Arkansas so they don’t have any strict laws. So I’m my case no.
@@MarioZermeno Thanks for your response
Can I wire tube to a switch in the truck
Yes you can. But I’d rather it be automatic in my opinion
Good vid bro, rlly needed this before I purchased them. Was rlly confused on how to connect the led light but ur vid solved that🙌🏽💪🏽keep it up bro🔥
Btw jus sub to ur channel 💪🏽
Glad I could help in some sort of way.👍👍👍
Where do I buy the exact t-taps and the piggyback connected and the other connecter
Upgraded 120 PCS T-Tap Wire Connectors, Self-Stripping Quick Splice Electrical Wire Terminals, Insulated Male Quick Disconnect Spade Terminals Assortment Kit with Storage Case-60 Pairs www.amazon.com/dp/B07WWV1T4C/ref=cm_sw_r_cp_api_i_bxCpFbDE7DPZ2
Hey what all do I need for the wire taps???
Crimpers and wire taps
did you connect the piggyback connector to a quick splice
Yes he did
Did u paint your grill ? How come its black, it looks cool
Yes it was painted along with with truck
So you have the led strip running all day? I was thinking about doing the same , but I think I’d rather just have them auto turn on by themselves
No they turn on and off just like I think you want them too. They don’t stay on all day.Lol
@@MarioZermeno ohh ok
Hey bro where did you get the fog light at ?
I got lights just like these and I tapped the headlight tube lights into the parking lights, and the parking light tubes as blinkers. My headlight parking lights will stay on for about 20 mins and then they blow their 10amp fuse?? There isn't any short that I can find, and the truck's electrical system Isn't acting funny either. Literally everything works fine until about 20 mins and then the fuse blows
Future videos.. Speak up!!!
🤣
These do work on Yukons?
Nice video bro !!
What drop kit do you have
Tbh I have no chance of doing this where's my mechanic 🧰
Did u get the corner light of the head light connected
Yes sir
What kind of bulbs were you running on your parking lights and turn signal
One pair of 3157 led and switchback 3157
@@MarioZermeno thanks man 💪🏽
@@MarioZermeno any specific brand or will they all shine the same?
How u connected da t tape
where can i get the piggybacks
How and where did you connect the piggyback female/male to
Umm i should say what wire to tap in to in the video somewhere. Thanks for watching
12:03
How do you keep your his ballast from burning out ?
I guess 2 things the manufacture which is opt7 and the location of the ballast
Ok awesome 👏. How’s your light light output for your low beams ? Can you see well at night ?
Good video man. I’m new to the channel. I subscribed hoping for more awesome content. Lee up the good work.
How did you get the fog lights mine are rectangle ish. I like the round look
Thanks for the sub man, hopefully you’ll find something new to do on your truck. So it’s a valance switch out off a Chevy Tahoe Z71 and they have the round fog lights
Where you got that grill
Did you put all the t-taps together on the same wires?
No, it’s three separate wires
What kind of t-taps do you use??
Where did you get the all black grille from?
Got it painted along with the truck
How are the headlights holding up today? Looking to buy the same ones very soon.
I’ll make a product update video for y’all soon
@@MarioZermeno are they all fucked up or not bro
Where did you get those bulbs on your bumper lights those are badass and what K 8000k or 6000k lmk TY
They are 8k, they are from opt7 band which I don’t think they make them anymore
Where did u get the fog lights bruh?
You did all of that and didn't turn on the turn signal once you installed them geeech you could of at least let us see what the turn signal looks like once you were done!!!
Thanks for the Feedback.👍
what hid kit are you using?
Opt7 brand 6k temp. I don’t think they sell HID kits any more tho
What kind of headlights did you have before they look nice too you got a new follower
Just look up on amazon 2000 Chevy Silverado Depo headlights
You say don’t test with the protective plastic and then you go ahead and do it 😂😂
How long did they last. ?
Still going strongn
Where did you get all the wiring stuff from ?
O Reilly
I’m thinking
T tap connectors but there’s different kinds
Have the same question
Just wired mine up and the issues I had were that the High beam bulb didn’t fit and the signal light bulb didn’t fit either. But I’ll give it an 9/10 ima see if the bar LED’s last long
I think you’ll have that if your running those LED’s with those fans, mine went in smoth. The bars are still good as of today’s date.
@@MarioZermeno even with the stock high beams it wouldn’t fit good felt like the hole was too small
How are they holding up what brand did you buy ?
@@David-gn3tq I got rid of them tbh not worth the money. They looked awesome but on the bumper lights they weren’t sealed properly and so humidity got into them and messed up the LED
@@saulreyna72 thank you🙏 I’m just gonna be buying the originals
Did you need any electric tape?
I dint use any, you can tho. I’ve rewired my lights and soldered everything since then
Do they fit a 2003 GMC ?
No, just Chevys
What bulbs are you using send link
Can’t. Discontinued
Where did you buy the Piggy Back adapters?
Arre the Headlights still looking and working good bro?
Yes sir, still going strong. No yellowing on the housing either.
Are you selling your old ones ill buy them
Donde los puedo e
Dope video bro but dont put music
Hey man its been 7 days now, how are they still working for you ?
They been perfect. Except this morning, it rained this weekend and the bumper lights got that dew haze. That’s about it
Hey bro do you Recommend and worth buying ?
Well Yeah they are worth it for looks for sure, but getting ahold of them now is the problem and the price went up on them pretty high
Those clips are giving me a problem too
Bad background music, keep things real ppl. No music
Where you get your turning signal light from?
Amazon. Links in one of my videos. Check out the channel
@@MarioZermeno you know which vid?
What lightbulbs do you have ??
They are OPT7 HID 8k temp but I think they stopped making them
Mario Zermeno Mann:( another brand you recommend ??
Its B and G not B C... battery and ground
R u positive