How to Install Spyder Projector Headlights V2 LED Light Bar, 1999-2006 GMC Sierra Headlight
Вставка
- Опубліковано 13 лип 2024
- My 2002 GMC Sierra Duramax diesel truck headlights badly need to be replaced so decided to go LED with the Spyder projector v2 headlight LED light Bar. This set by step video will show how to install 1999-2006 headlights GMC Sierra. Plus I will be replacing the GMC Sierra turn lamp assembly and will show removal and installation. Part list below👇.
SUBSCRIBE and CLICK that BELL to make it RING for the LATEST EPISODES 🙌
👉 / joelwallisadventuresun...
PART LIST:
🔥 Spyder Auto Version 2 Projector Headlights Light Bar DRL Part # 5084521 for 1999-2006 GMC Sierra
👉 amzn.to/2YHxTxS
🔥 HB3 & HB4 LED Headlight Bulbs, SEALIGHT 9005/HB3 9006/HB4 LED Bulbs Combo Package CSP Chips 14000LM 6000K Cool White
👉 amzn.to/3v5OiIu
🔥 Black GMC Sierra Yukon Front Bumper Signal Light Parking Lamp Assembly
👉 amzn.to/3iTB38F
🔥 WHITE LED DRL, Phinlion 3600 Lumens 3156 3157 LED Backup Light Bulb Super Bright 3047 3057 4057 4114 LED Bulbs for Back Up Reverse and DRL Daytime Running Lights, 6000K Xenon White
👉 amzn.to/3p04BFo
🔥 AMBER LED Parking Lights, LASFIT 194 168 T10 2825 W5W LED Bulb - Amber Yellow - Canbus Error Free, Non-Polarity 400LM Extremely Bright for Side Marker Map Doors, 12-24V (Pack of 2)
👉 amzn.to/3ar8quX
🔥 AMBER LED Turn Signal Lights ( will need load resistor for 2002 GMC Sierra ), AUXITO 3157 LED Bulbs Amber Yellow LED Turn Signal Bulb 3156 3056 4157 3157A 3457A LED Replacement Lamp for Turn Signal Blinker Bulbs Side Marker Lights (Pack of 2)
👉 amzn.to/3auRHXy
🔥18-14 AWG Wire Tap Splice
👉 www.acehardware.com/departmen...
(The products above may contain affiliate links which gives me a small commission when you purchase, there is no additional cost to you. This helps support and allows me to continue making these videos. Thank you in advance for your support!)
#spyderauto #spyderheadlight #gmcsierra #gmcsierralights #howtogmc #trucklights #headlights #duramax #gmcduramax - Навчання та стиль
By far the BEST video i have seen for these generation of trucks of installation of headlights. I just bought a 2006 GMC Sierra, needing headlight work done. Thank you so much too for putting the amazon links in the description.
Thank you for the nice compliment! I think you will be happy with these headlights on your 06 GMC. I am still enjoying these headlights and really like the refreshing look it gave my truck. Thank you again! Cheers!
@@joelwallisadv Unfortunately, Amazon has that item as unavailable. So I found some on EBAY with the same model number! Thanks so much Joel!!
@@camerongarcia5443 Nice! Glad to hear you were still able to locate a set!
I will only be satisfied by the video if I come by and you do the install because it looked like a pro did this lol.
I would totally do it for you if we were in the same area 😊 as it was a lot easier than expected. You have a friend that is savvy?
Definitely gave the vehicle in updated look. Thanks for the review and going over the wiring part. Lots of others skip that part completely!
And the lighting improvement for driving at night is significantly better then stock! Thank you for the nice compliment and happy to have helped!
thanks for actually showing the beam patterns on the road.. thats what people need to know.
Excellent video, I bought these lights,you helped me a great deal on the wiring. Thanks
Awesome! 🙌🤘
Nicely done. Of course I was looking for plug and play or a kit that provided everything thing, but alas, I'll use your links to get the LEDs
For the hyper flash, I installed a LED flasher relay that does under your steering wheel. Made it much easier than wiring in resistors
That is a good idea! Thank you for sharing!
Yea that’s the way to go for sure those resistors get so hot
where is that relay located? Steering wheel or under the dash? I have an '05.
@@user-nj8uu8ze7eunder the steering wheel in that panel. There’s videos on how to do it
Makes a huge difference
Right! Looks and lighting performance!
Looks great bro…👍🏻
Thanks man 🤘
Damn those look good. Really wish they made those exact same ones for my 06 tahoe tho
On the light fixture yes I did was there are 3 small screws on the back were the conector is you can screw tight or loos the screws an them tight the small screws.. if you ever need to help you on the moisture help..
Best video.
Thanks man!
The move that I did was from bottom light fixtures to the top 🔝 light fixtures.. lol more faster an easier an safe
Third solution for the hyperflash: they make replacement relays for LED bulbs. Much easier than in-line resistor and no heat on a resistor that you might have to worry about
Can I make the drl flash with the turn signal? If so how? I plan on doing it myself for the first time just don't want to mess anything up
Great video!
How do you adjust the high beams
New headlights looks on the GMC. I see you have dual batteries what batteries are you running ?
🙌 batteries are Optima
You can get an LED fuse so you dont need the resistors
Shoulda tapped into the DRL, it looks good with those just on in a gloomy day
And then they won't work at night. Can't win
Use sylvania they have the resistors built in
How are those HB4 and HB3 led kits holding up? I remember the early after market hid's would burn up in a matter of months or weeks sometimes.
I just sold the truck recently but they worked really well
I did the exactly what you did wiring the cable but my tube lights didn’t turn on is there something I could have done wrong?
You might have a defective unit. I’d reach out to Spyder about warranting it.
Hey… just wondering for the quick taps… wire is the wire gauge of those 2 wires
I used 18-14 awg for the wire tap size. Hope this helps! www.acehardware.com/departments/lighting-and-electrical/boxes-fittings-and-conduit/lugs/34566?store=15648&gclid=Cj0KCQiA-eeMBhCpARIsAAZfxZCmfFkHBDIV0lCML26o_uJDMCwIpMPpuVAFDjQPVvuIwLS9l7NlT6kaAp2lEALw_wcB&gclsrc=aw.ds
Did the headlights get any moisture inside with the wobbling high beam bulb, really want to know because I’m think of buying those.
So far no issues with the headlights and super happy with them.
@@joelwallisadv sounds good thanks for the update.
Can the led tubes be wired to the DRL lights instead so there on all the time?
I have seen people do it so I’m sure you could but then at night time the tube lights won’t be on just as a fyi
Would it be safe to splice into that turn signal twice because I have a cateye with 2 bars
I am not sure on that
Were these brighter than the stock lights? They look awesome but seem fainter?
They are brighter but a little more fainter on the side of the road. The stock seem wider like a flood light but didn’t have the same distance as these
Did you get the smoke turn signals or the black housing
Black housing
What’s the bulb sizes for the turn signal, side marker and drl?
I have all the bulb sizes in the description 🙌
Thanks for the video. I have a 06 GMC Sierra 2500HD 4X4. We have Spyder lights just like yours coming in tomorrow. How are yours holding up? I think I may silicone around the housing for added insurance.
Mine have been holding up good so far with no issues
How do you like the headlights?
@@summitwhite_lb7 I like them. Way brighter then stock. My only gripe is when adjusting the beam angle you have to remove the headlight.
How do you like them?
@@summitwhite_lb7 my response up above👆
Where can I find a front bumper like yours it looks nice😮💨
It’s stock
Can i tap the led wires into my daytime running lights so the led strip will stay on when im in drive and not just park?
I don’t see why not. They just won’t be on at night when your drl switch to headlight mode
Parking lights are also referred to as marker lights, they are not lights that go on while your vehicle is in park position. You definitely want to tap the parking/marking lights. Like OP said, DRL will only come on in daylight.
Curious what your thoughts are on them a few years down the road!
I had upgraded to another truck last year but they held up pretty good for the time I owned them.
@@joelwallisadv thanks for the reply man! did you have any moisture that got into the housing?
@@nebula4798 not in the spyder headlights but I did get a little bit in the drl/turn housing which was non spyder brand.
Where you get the splice from that’s the only thing I need
I got them from Ace hardware but any hardware store should have them. The link to them is in this videos description btw
How much did these cost? I see the "spyder" ones for like 450, or the "akkon" ones that look the exact same for half the price
$270 off Amazon. Link in the description :)
My daytime running bar does not light up. Can anyone tell me what I did wrong? I connected the negative to the negative and the positive with positive wires by using the T tap splicers.
Did you tap into your parking lights?
Instead of resistors, put an led compatible flasher relay.
Excuse me what size does the blue electrical idc wire connector
And could you put a video on how to use it because I’m new to all this car stuff and trying to get to understand it without messing up the lights
I used 18-14 awg tap splices. Not sure by what you mean how to use it as they are headlights and pretty straight forward. Let me know what you were referring to and I’ll see about a video if it makes sense 😁🙌
@@joelwallisadv could any other size work if it’s a little bit bigger or smaller awg?
@@fitcardYT these are what you’ll want to use. Same as the ones I used. www.acehardware.com/departments/lighting-and-electrical/boxes-fittings-and-conduit/lugs/34566?store=15648&gclid=Cj0KCQiA-eeMBhCpARIsAAZfxZCmfFkHBDIV0lCML26o_uJDMCwIpMPpuVAFDjQPVvuIwLS9l7NlT6kaAp2lEALw_wcB&gclsrc=aw.ds
I don't really like the look of LED lights. Can I use a regular halogen bulb with these headlights? I like the Sylvania Silverstar Ultra that I have in the stock headlights- I just hate the pattern of the OEM.
Absolutely you can use reg halogen bulbs with these.
@@joelwallisadv ok thanks!
I just ordered these lights but the turn signal assembly is different from yours even though I clicked your link. Yours has a crystal design over the far right bulb. The ones in the link must be a newer generation or something because they are completely clear. I like yours a lot more but I don't think I have any other choice from Akkon unless I go with the clear with amber. That sucks but either way it'll look better than what I have now. Thanks for the video. Very informative
I actually kinda like them better but I think I found the version that I have in the eBay link below in case you can return them. But either way it’s gonna look better then stock imo 😎www.ebay.com/itm/382227549507?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=Oy-oQhUTQ1q&sssrc=4429486&ssuid=W6vwhT2_SAG&var=&widget_ver=artemis&media=COPY
Just did mine one side works did the same steps for other side nd led strip not working
Sorry to hear :( Maybe you got a defective unit?
@@joelwallisadv yea possibly getting em exchange but thanks dude did exactly as you did with the quick splices followed every step truck looks clean other than that hoping new one works then I’ll upgrade all bulbs to leds or hids havnt decided yet
@@sanabria49er Hope you get a speedy replacement :) Definitely gives the truck a slick look!
Those spice are junk folks. Corrosion will work into the harness.
they look dumb imo I prefer stock