Very impressive. Lot's of pressure focused to a very small area. Nice slow motion replay. I think the original bypass you found cleverly hidden under the rubber stopper is a more discrete way to get in there, but nice to see the Ramset come out and destroy something. 👏👍🔓
I did in fact . I got the sparrows tuxedo kit along with a few other tools and have picked a few locks but nothing special. I don’t practice as much as I should
1:55 since you guys like the ramset so much! LoL yeah let's do it! Well that was unbelievable how that just exploded into bits. You must of got carried away to forget to switch on camera for lock housing! :)
It’s now a lifetime member of the Ramset “Club” They hardened but not tempered the rod, but with the other inbuilt deficiencies it makes little difference, another great video, pity about the technical difficulties:)
"... since you guys seem to love the RAM set so much..." a nice observation and a nice response! 🤪 😆😆😆 Thank you!! I would never pick a lock but I love your videos, your narrating and your subtle sense of humour. You got me nearly there to buy some equipment und try. Yet I could resist till now! 💪
I wonder how many thieves are buying ramsets after seeing these videos. I also wonder if shooting at locks with firearm calibers like .357 or 5.56 NATO would have similar results. The shock of a concentrated, high speed impact from the ramset is so catastrophic for locks that I can't imagine that a small and incredibly fast round like a 5.56 wouldn't do some serious damage. I also would love to see how much more effective armor penetrating rounds are on hardened steel locks than plain FMJ rounds. I think it's time Lock Picking Lawyer does a collaboration video with Demolition Ranch to answer these questions.
I did not expect the bar to shatter in multiple pieces!! I think their heat treat methods are to blame for this. They may have quenched the bar to harden it but I don’t think they then tempered it.
There are reasons for this. Try breaking a piece of dry spaghetti, it will break into 3 or more pieces. Smarter Every Day has a high speed video on it.
I doubt it would have made much difference, but a more accurate test would be to have it braced against something with more flexiblity than the floor when striking it. Steering wheels usually have some give to them and would absorb some of the impact.
When I saw you had it sitting on the Arms, with the Ramset spot being in the middle, which was elevated, I had figured that if it broke, something like the flying pieces would happen. Happy to see I was right, still fun to watch.
Describing all the possible entry methods: 1min 14 sec Time from ramset loading to entry: 8 sec Number of pieces: 7 Conclusion: less secure than having a manual transmission.
"Technical difficult" haha forgot to turn the camera on. This is something all utubers should do twice before starting, I know plenty of others make this mistake an lose unretreivable material. Never mind the best was recorded.
ABUS , has a steering lock called the Carblock 73 Granit. It's made of solid steel. Looks far superior to anything made by the "Club". Only problem is, I haven't seen one for sale in America. But if I ever go to Europe, I'm going to get my hands on one.
The slide hammer exploit seems more plausible to me given that it would be a little less messy overall but great demostration of the poor quality materials, on another note have you consider doing videos of common brute force atacks on doors, and the features in a door lock that makes it good or bad? thanks for the videos :)
..I HAD A CAR THAT WAS ON THE CRIMINALS LIST..SO BEING A LICENSED ENGINEER..I WELDED TWO TRUCK CHAINS INTO A SCAFFOLD POLE ..THE POLE WENT OVER THE HANDBRAKE..WITH ONE CHAIN PADLOCKED TO THE STEERING WHEEL....OTHER CHAIN PADLOCKED TO GEARSTICK...NEVER HAD IT STOLEN ...WONDER WHY !!
I don't know what type of law you practice, but if you do any kind of civil suit work you could advertise yourself as "The Rammer"- when insurance companies want to keep your money locked away, The Rammer knows how to make them open up!
Just amazing what manufacturers claim but what their product can actually do is quite another thing! So often the "macho" name doesn't fit the wimpy material of the lock.
I don't know if I should continue practicing picking locks because if your example is correct, once you get to your level of skill you become so bored picking that you begin to start shooting locks off.
The only thing missing is an old steering wheel from a junk yard, (I'm thinking that the padding on a modern wheel might be a factor. I like your attention to scientific detail.)
I was wondering if you could try to do a couple videos on the xena motorcycle disk lock exploiting it's weakest points picking it and using the ramset on it to see how strong it really is
Impressive - but definitely not to be used in a car any time soon. Flying metal and expanding airbags - alarms sounding, dogs barking - and that embarrassing piece on TV, how the police found you stunned in the seat and holding a large, gun-shaped object...
Have you ever tried a high velocity ramset (one without an internal piston) against locks? I've got one of those laying around but I honestly lack the balls to use it against anything that isn't a solid, flat surface. Don't want to end up guarding some random door mumbling "I used to be a lock picker like you, but then I took a hardened steel bolt to the knee." whenever someone comes by.
I am strangely addicted to watching these videos. I have binged watched these now for several days.
Lol same
Weeks...
Same, and I don't even pick. Lol
2021 the same here
@@jonathanpresson777 me neither, but I'm very tempted to start.. Also, my nickname is also JP, short from Jaripekka
The mighty Ramset strikes again.
DuesenbergJ and how 👹
*rams again
“The power of the Ramset.”
lock manufacturers: THIS LOCK IS EXTREMLEY HARD TO PICK AND SUPER TOUGH
LPL : he he ramset go bang
Very impressive. Lot's of pressure focused to a very small area. Nice slow motion replay. I think the original bypass you found cleverly hidden under the rubber stopper is a more discrete way to get in there, but nice to see the Ramset come out and destroy something. 👏👍🔓
I wonder if it'd be funny to see what the Ramset could do fired right into that rubber stopper bypass...?
That was a Ramset beatdown for sure. Loved the slow mow too,that was a good touch. Thanks for sharing it with us brother
Oh yes, how can I forget this one, it has the access hole for easy picking/bypass. LOL. Always a pleasure to watch the brute force attacks
What a waste
not worthy for Ramset
buuuuut.....
I am a Ramset porn addict, so it's ok, I guess
Don’t stop making these interesting videos! I find lockpockin to be such a fascinating skill and might try to learn it myself!
Well, did you try and learn? Just, curious because I now have the pickybug and would like to start
I did in fact . I got the sparrows tuxedo kit along with a few other tools and have picked a few locks but nothing special. I don’t practice as much as I should
Tested to destruction. LPL doing the testing that the manufacturers skipped. Thank you sir!
"technical difficulties" hahaha! Very funny.
Ya got me.. i do get a little excited when i see you post a ramset video haha
1:55 since you guys like the ramset so much!
LoL yeah let's do it!
Well that was unbelievable how that just exploded into bits.
You must of got carried away to forget to switch on camera for lock housing!
:)
It’s now a lifetime member of the Ramset “Club”
They hardened but not tempered the rod, but with the other inbuilt deficiencies it makes little difference, another great video, pity about the technical difficulties:)
"... since you guys seem to love the RAM set so much..." a nice observation and a nice response! 🤪 😆😆😆
Thank you!! I would never pick a lock but I love your videos, your narrating and your subtle sense of humour. You got me nearly there to buy some equipment und try. Yet I could resist till now! 💪
I wonder how many thieves are buying ramsets after seeing these videos. I also wonder if shooting at locks with firearm calibers like .357 or 5.56 NATO would have similar results. The shock of a concentrated, high speed impact from the ramset is so catastrophic for locks that I can't imagine that a small and incredibly fast round like a 5.56 wouldn't do some serious damage. I also would love to see how much more effective armor penetrating rounds are on hardened steel locks than plain FMJ rounds. I think it's time Lock Picking Lawyer does a collaboration video with Demolition Ranch to answer these questions.
Technical difficulties aside this was still a great video. Nicely done
Thank you for blasting the heck out of that thing.
I have always abhorred those steering wheel locks.
I guess these types of video's will also give thieves more ideas on how to break into cars and locks
RAMSET RAMSET RAMSET !!!
I did not expect the bar to shatter in multiple pieces!! I think their heat treat methods are to blame for this. They may have quenched the bar to harden it but I don’t think they then tempered it.
THR33STEP I blame you...
There are reasons for this. Try breaking a piece of dry spaghetti, it will break into 3 or more pieces. Smarter Every Day has a high speed video on it.
"The Ramset wins" Always does 😁
I click these vids so fast when I see the Ramset
RAMSET BOYS!
I doubt it would have made much difference, but a more accurate test would be to have it braced against something with more flexiblity than the floor when striking it. Steering wheels usually have some give to them and would absorb some of the impact.
When I saw you had it sitting on the Arms, with the Ramset spot being in the middle, which was elevated, I had figured that if it broke, something like the flying pieces would happen. Happy to see I was right, still fun to watch.
The first thought that came to mind was why not just use vice-grips progressively tighter on the zinc part
The RAMSET its back, also catastrophic Failures comes with it. 🤗👍
Wow 683 videos, you are amazing sir
I think a quiet way would be to use a pair of vicegrips and brake the lock housings right off
Describing all the possible entry methods: 1min 14 sec
Time from ramset loading to entry: 8 sec
Number of pieces: 7
Conclusion: less secure than having a manual transmission.
i normally don't like lawyers but I love this guy, just can't get enough watching him destroy shit
Ramset, Ramset, Ramset!
all those lock picking minigames in video games and somewhere in the hammer space gun inventory we cant find room for a ramset to just pop every lock.
Wow, it's worse than I thought! That shaft exploding was ridiculous! 😨🍺✌
Don'z Lockz it's exactly verbatim what my first girlfriend said...
I am addicted to watching these videos
You took it like a man, you've just got to remember to turn the camera back on once the pains stopped.
"Technical difficult" haha forgot to turn the camera on. This is something all utubers should do twice before starting, I know plenty of others make this mistake an lose unretreivable material. Never mind the best was recorded.
Good video! Also it is nice to see you in protective gloves :-)
Was a car thief for 15 yrs
We use to dent pull these..
Or like he said,cut the steering wheel
ABUS , has a steering lock called the Carblock 73 Granit. It's made of solid steel. Looks far superior to anything made by the "Club". Only problem is, I haven't seen one for sale in America. But if I ever go to Europe, I'm going to get my hands on one.
A hammer and chisel would work just as well. And a lot quieter.
Thank you very much I like that you made my day keep up the good work bye-bye
Thank you for giving thiefs a useful tutorial in exchange for views on your channel. 👍
"You guys seem to love the Ramset 'for some reason'.". Firearms (of any kind) are king in this country. It is known.
the ramset would be quick and in the correct place wouldn't bring up too much attention if you towed car away with tow truck
I can't even remember the last time I saw somebody use a steering wheel lock.
Maybe the late 90s?
Don't you afraid that the lock industry will have assassinated? 😂😂😂
Love the Ramset.
Loving the slowmo!
Ramset FTW
The slide hammer exploit seems more plausible to me given that it would be a little less messy overall but great demostration of the poor quality materials, on another note have you consider doing videos of common brute force atacks on doors, and the features in a door lock that makes it good or bad? thanks for the videos :)
A singular strike!
“Let’s head down to the garage and have some fun”! Horror movie stuff! 😖😖😖
Da da dads da da dada screech screech.
I’ve heard you can freeze them with an inverted air duster.
Ranset, Ramset, Ramset,,,,YAY Ramset !!😛😛😛
I dont know how i got here but i love it
..I HAD A CAR THAT WAS ON THE CRIMINALS LIST..SO BEING A LICENSED ENGINEER..I WELDED TWO TRUCK CHAINS INTO A SCAFFOLD POLE ..THE POLE WENT OVER THE HANDBRAKE..WITH ONE CHAIN PADLOCKED TO THE STEERING WHEEL....OTHER CHAIN PADLOCKED TO GEARSTICK...NEVER HAD IT STOLEN ...WONDER WHY !!
I don't know what type of law you practice, but if you do any kind of civil suit work you could advertise yourself as "The Rammer"- when insurance companies want to keep your money locked away, The Rammer knows how to make them open up!
I have a Ramset and the club is locked on my wheel. How can I remove it..I lost the key.
I love how you use tools nobody else has thought of to exploit the locks weakness's
mancraft bad part about it is they know now. LPL has done all the thinking for them.
wish I would have watched this before I bought one
very interested in purchasing ...
So all you have to do is give it a good hard yank in center of locking bar and it shatters like glass. Good to know.
Just amazing what manufacturers claim but what their product can actually do is quite another thing!
So often the "macho" name doesn't fit the wimpy material of the lock.
Which Steering Wheel Lock do u recommend ? please help me :)
You should try the stop lockpro.
Ramset 2 the Pharaoh of lock picking
Many thanks. Now, what to use?
I don't know if I should continue practicing picking locks because if your example is correct, once you get to your level of skill you become so bored picking that you begin to start shooting locks off.
The only thing missing is an old steering wheel from a junk yard, (I'm thinking that the padding on a modern wheel might be a factor. I like your attention to scientific detail.)
Are there any locks that are okay. This all just proves locks only keep honest thieves out.
You gotta test out the Auto lock devices too. Itll be very interesting
I would like to see how you used the Ramset to take out the core. Would you be able to re-record? (with a new club of course)
It’s hardened so you can’t saw through it. Obviously it shattered.
I wonder how fast you could saw through the thinnest part of that bar?
Set Qesu I doubt that a hacksaw do anything to that. Looks way too hard.
Makes me wonder if you couldn't just yank on it in the middle and snap the bar by hand...
I was wondering if you could try to do a couple videos on the xena motorcycle disk lock exploiting it's weakest points picking it and using the ramset on it to see how strong it really is
I wonder if forcing the air bag to deploy would be sufficient to break it. Thoughts?
The air bag should burst towards the driver, thus the lock should be unaffected?
This video by SmarterEveryDay probably explains why the bar broke into several pieces: ua-cam.com/video/ADD7QlQoFFI/v-deo.html
Please review Twin Hook “Club” 3100, it's new version with better lock
Kids if you want to have tough steel you have to harden it AND temper it afterwards. Otherwise it will be brittle like glass.
Geez.
MORE RAMSET VIDEOS PLEASE!!!!
Like people are just carrying around a ramset 🥳
This looks too easy and dangerous! How powerful is this model of ramset? Can it be bought from ordinary tool stores?
I would like if you tested all possible weak points (extra destruction)
No wonder why moms camry got stolen.
One Punch Ramset
LockPickingLawyer, would you by any chance have a video on picking the western electric payphone lock?
Do you have any recommendations for a steering wheel lock?
0:46
"You may recall that in video # 600..."
Impressive - but definitely not to be used in a car any time soon. Flying metal and expanding airbags - alarms sounding, dogs barking - and that embarrassing piece on TV, how the police found you stunned in the seat and holding a large, gun-shaped object...
If a ramset has this effect, maybe a hammer by itself would be enough to break the shaft?
Have you ever tried a high velocity ramset (one without an internal piston) against locks? I've got one of those laying around but I honestly lack the balls to use it against anything that isn't a solid, flat surface.
Don't want to end up guarding some random door mumbling "I used to be a lock picker like you, but then I took a hardened steel bolt to the knee." whenever someone comes by.
You should have a ramset playlist 👍 and I was also wondering if this if still your original ramset?
Have you found any new locks worthy of letting Ramset Go Boom?
Tremenda idea para los que rroban carros eso sín nifica que no tenemos seguros los carros
So what’s the best auto security system???
I feel like you are going to make a semi useful tool a felony to carry without specific papers.... maybe?
I WANT A RAMSET!!
Poor heat treating can make steel brittle.