Lmao that sound is wild. I have two K2 Plus with CFS and neither makes a sound REMOTELY similar to that 😂 One of my K2 Plus units has been amazeballs and the other had issues out of the box. Creality has sent at least $200 in parts and its back up and running. Their support was honestly great and offered to send OTHER parts that *could* be the problem just to expedite the chance of getting it back up and running
Just a quick heads up here from my print farm. I have the new Cryo Grip plate and after only a week the machine did an auto bed level check before running the next print and drove the nozzle down into the plate and skidded across the plate with a deep gouge making it junk now. I've heard there is a problem detecting these new cold plates etc...yeah...there is trouble.
Oh man.... that noise from the CFS would drive me insane, and I wouldn't be able to print with it. It's not normal, especially since it's only happening on one slot. Nice to know that the Vision Miner Polymer did it's job. But that really sucks about the warping and it popping the bed up.
it was just a culmination of so many single issues all one after another and even at the same time! Talk about a frustrating weekend, lots of wasted filming too!
Not to enjoy your troubles but it is nice to know you have problems like myself. I enjoy your videos and what you do. Thank you for the insight with what you do in the studio.
I owned a Qidi tech X Plus 3. I hated that thing. I then got an X1C. I really want a larger print bed, but I'll wait for Bambu. I can't for them to release it!. I will be getting it.
With BL's new firmware rollout, not sure if I want to go with them. I heard it was not well received. Besides, I have had 0 issues with my K2. Guess I've been lucky so far.
i thought i had a bed adhesion issue figured out on my printer. had 2 successful tests with the same file but only partially printed. could not for the life of me get it to print again when i went full send. discontinued that model for sale for now cause i just don't have the time to modify it or figure out which exact profile setting to change.
The first time the CFS screamed I wasn't paying attention to the warning... and I seriously thought someone was being murd*red.. then I saw your facial expression and I got the gist of it😂
legit my chickens go like that CFS every morning before feeding time 🤣 on a serious note thank you for the vid, i'm willing to take a k2 and i'm considering every feedback i find here on YT
Wow! There's no way I could put up with that CFS scream! I'm amazed you didn't stop the print, I would have. So you got all the failures out of the way early in the year. Smooth sailing from now on.🤞 The K2 Plus does look very tempting (a quiet one at least) Cheers!
Good vid. Have had all those issues over the years. If you know a part wants to warp and you need to use an adhesive to keep it stuck, clip at least the 4 corners of your build plate with strong metal clips.
@@LoyalMoses you need higher chamber temperature... the large print covers too much of the heated bed, the bed does not need to be heated that much and so the chamber is getting too cold and the warping starts... you can try to mount a fan under the heated bed (pointing upwards) so more heat is transfered to the air in the chamber (works best without bed isolation).
That sound the CFS made sounded like a banshee wail! Seriously thought someone was screaming in pain 🤣 - I have a Neptune 4 Max and to say that its been a smooth experience would be lying. My K1C has had some failures but it is mostly reliable, my A1 mini is the little printer that could, but the N4 Max has nearly found itself thrown out the window so many times that I'm finding myself creating completely new parts for it and ideas from Prusa and Sovol printers that I've nicknamed the modified version the Neptune SV04ks Max
Good luck. Yes, we have had print issues, your cousin made me 2 different Sorcerer Mickey on the Bambu A1 mini and they both have issues. Ken says it's the file that's the problem, not the printer. So I have been using Plastic Wood to fill in those areas and going to paint them.
I think it's important to capture days like this because they absolutely happen, and people getting into printing need to know its a thing that happens, but it's not insurmountable. My least favorite was trying to make an Orcaslicer profile for the Kywoo Tycoon because enough people had been asking, being new enough to Orca that I didn't triple check acceleration before printing, and toasting a stepper driver. The drivers are soldered in so it's a whole board replacement to fix, the main page didn't have them in stock, could order from France or get the board it was cloned off of, and even with that the board is stuck in such a weird place it fequires a crazy amount of disassembly to get at. I had the Magneto X coming, so I just boxed it up for the day I feel like going through all that headache.
I have the Anycubic Kobra 3 Combo. I got it just before Thanksgiving. In the time I have had it, it has been down 75% of the time. Anycubic has been great sending me the parts, but it takes two weeks to get the part only to find out there is another issue. To say it is still frustrating is an understatement. I have replaced the Motherboard, print head cable, hotend, camera and now they are sending me a new print head and fan for the power supply because it sounds like a jet engine starting up. Oh, and as of last night, the AMS is throwing a code saying there is a clog. I have taken everything apart and verified there is no clog. So I can feel your pain and frustration. Yes that sound your machine is making, does and would drive me insane. I am about to go Office Space on my printer if it doesn't start working like it should. When it is working, I love the prints I have made. But I am addicted to this 3D printing.
I recently had a print come detached from the bed. I’m use to finding a mess of spaghetti but not this time. It was a tallish cylinder and it stuck to the nozzle and was scooting around the bed. This caused the pla to create a giant blob that inflated the silicone sock and pushed plastic all the way up to the cooling fan stopping it so heat creep could add to the party. I went in to check it and was amazed the little Ender’s extruder was still feeding that creation. The only thing I was not able to save was the fan. It had enough pressure applied it was missing a blade. Blade was pressed against the heatsink. I regret not it taking pictures of it but at the time was focused on getting the printer up and finishing the planned prints for the day.
man that sound i thought you had some farm animal in the house haha.. and havnet had to many printing issues. though today my ender 3 v3 is not wanting to stick on one part of the bed. thought it was the filament and nope switched it out and did the same. so just cleaned it letting it air dry and applying that vision minor again and see what happens. Also set up my anycubic kobra 3 combo and it has been awsome so far. oh and waiting on that sweet a1 mini i won the other day stream yall did. talk about going from no printers to now gonna be 3 plus. Goonies for the win hahaha
@@LoyalMoses yeah thats what i was thinking haha.. now to get some orders and find a good niche.. got an idea of why slot 2 sounds like it needs some major oil haha?
I am going to try and open it up today just to look! I am sure that Creality will send me another one just so I can have a good system to film with, but I still would like to know why.
@@LoyalMoses makes since. im sure they will send you a whole new unit. but yeah get in there and see whats up. i man expecially if you wasnt a content guy and homeowner who bought they may have you open it up and replace parts they would send.
It sounds like the CFS is having problems with the first stage feeder. Likely, plastic has grinded itself in the feeder. It could also be the spool is too light. When retracting, it could be too light thus making nasty sounds. Sometimes adding a weighted core to your spool helps with AMS designs. I would still contact Creatlity for a replacement part or unit. Everyone has these days my man. Just get the maintenance done when you’re ready and you will be off printing again with no problems.
I've had problems like what you're having with ironing but on an old-school Creality Ender 3 Pro. I was trying to print a Super Mario Bullet Bill wall hanger with ironing and it kept going wrong EXACTLY like what seems to be happening to you.
It should work great with default settings ONLY if there is absolutely no warping. Even the slightest of lift from the build plate, even if you can’t easily see the lifting, will cause ironing to look bad. I have some other NES cartridge content here on the channel, and the ironing was perfection!
@LoyalMoses Thanks for the reply. I just don't like how it looks. I thought it was supposed to smooth out the surface. Tried with my ASA and PLAs. I've only been printing for 2 years, though, too.
Dude I am so glad others are coming out about these issues, we have been through 2 warpped beds and 3 extruders. And our CFS screams as well....lol. This printer will need a lot of modifications. Should of waited for the Bambu release.
In the video I said that my printer is printing perfectly, not a single problem - just the loud CFS slot 2, which they've already acknowledged and are sending the replacement. I haven't experienced anything bad at all, and I make it a point to not worry about the problems that other people experience, just share my own,
That is more annoying than a standard ender 5 plus that sounds like someone murdering a droid. Perhaps you should run both side by side and get a duet going 😂
Ahhh, now I understand how Creality saves money!!! Rather than electric motors they use lemmings in their CFS…. Looks like that little guy has a leg stuck in the gears…
Omg, That sound would drive me insane. Is it a bad bearing or something. Creality just released creality print 6 this week, it's supposed to be better. I haven't updated it yet myself though.
Screaming isn't normal, lol. My K2 works great but Creality needs to improve their filament flushing, particularly between white and black. Even with the latest firmware there's banding.
I thought someone was screaming! That is crazy loud. I am really interested in that Thinker X400. Hope you can get it up and running I really want to see more of it. Sucks you’re having “one of those days”. Been there done that.
Is the filament roll in port 2 made from something other than the ones in 1, 3 and 4? Carboard vs Plastic or something? Is the noise coming from rubbing or the gears? If it's from rubbing try using a thin adhesive felt strip on the top pressure plate. Also use Orca Slicer, they have K2 Plus profiles now and works much better than Creality Print 6.
I have none of those issues. I have nothing but a great working machine (The CFS doesn't sound like that for me). You definitely got a lemon. Sorry to hear that bud. Love your videos.
Hello, as soon as I saw that you already have K2plus, I couldn't miss the opportunity to ask what you use to prepare files. Do you use orca or creality slicer and did you manage to connect k2plus with orca.
@@LoyalMoses hope so, I got the email and was excited, then I remembered why my S1 Pro sits and collects dust most days While my bambu's and elegoo 3 pro(not 4 pro that thing was rough) do the work.
Sometimes the files we print are more sensitive to the settings as I have found out. Hope all is good in your neck of the woods and look forward to that future review. Ty sir!
Thats very unfortunate about your k2 plus i have had flawless prints and have had no errors or any issues besides small retraction errors which is nothing
@ LoyalMoses it really is an amazing printer i have a k1 max and had continuous issues with mine but i decided to preorder the k2 plus at 50% off and just recieved it a couple weeks ago and have used it more than my 2 p1s combos and a1 combo lol.@@LoyalMoses
Very clear in the video, the K2 produces great results, and the P1S is one of the best machines on the market. Slot 2 on the CFS is broken, which happens - I am a realist, even my $90k truck arrived with a damaged moonroof, this stuff just happens and really isn't that big of a deal. As for the P1S, the orientation of the model, my choice of infill and attempts to use ironing when PLA was warping was the issue. It's really not that difficult to understand.
I feel your pain. I just completed 49.5 hrs of a 50 hr print. The very last piece keeps taking the spaghetti route. It's a very small piece which takes 30 minutes to print. And this is on a X1 carbon.
@@LoyalMoses yeah that thing. but the rest souns like you dont understand the machines you operate while giving tips how to use them. it is just my opinion. i can be wrong i just watched some videos of you and that is the feeling i got. but dont think i think i am wright on this you know best offcourse. so do not let 1 viewer get to you. i just go over to other creators and get my tips there.
I don't ever have 3d printing mishaps because I employ the use of my beard powers to ensure all prints stick properly. My beard powers are too powerful
I thought Mrs LM was screaming at first, then i thought someone was screaming in pain! That would terrify me if i woke up to that in the middle of the night. Did you get a picture of the build plate wrapped around the print? That's just proof, to me, of how good Vision Miner NPA is. I got a little too excited to take a large print off my A1 Mini and didn't let it cool. The NPA worked so well, my printer came off the table a few inches when I grabbed the print to take it off.
it's creality what did you really expect ??? i made people bought lot of cr10, ender 3 ender 5... worked well for one year and after that the hotends were needed to be replaced if you want to keep printing correlcty.... the cheap comes at a price.
This may have been more true many years ago, but there is a significant difference in machines now vs then. In another comment or two, I mentioned how I ordered a custom $90,000 truck -- it had problems when it arrived. This happens with every brand in every industry. What we are seeing is massive improvements across the board with every brand, our expectations are increasing as consumers and these companies are trying to meet them as quick as they can. This makes me hopeful that we will just get better and better 3D printers.
@LoyalMoses yeah but we are talking about the brand that make the k1... Which fixed it's bugs design flaws etc by selling a new version. They did the same for their scanners. My lizard never reached what creality promised. And they advertises the next one as the one that can scan dark parts... Which was what the lizards suppose to do but never did.
I feel for you! I have seen that same exact facial expression every once in awhile when Murphy decides to ruin my day. I think you may need to add a live blood pressure monitor and a big fat red Easy button! Anytime stuff goes wrong it usually does so in a cascading chain of events. The up side, there are many more days where everything just runs completely rosy. Hope all is back to normal! What printer caused the failures to all the large panels, the K2? I have never been a fan of Creality software. I had a whole day of this about ten days back where things just went downhill fast while working on a very large 1.3M RC plane.
Just heard Creality release CFS conversion kit for E3V3 and I want to order one to try it out. but if it gonna scream at me like that every time I print, I don’t think i want it Anymore 😂 I’ll stick to my Bambu’s AMS.
ok I was maybe to fast to comment lol, that sucks sounds like a frustrating week, I see the promise in the NES carts though, they'll look awesome when completed.
Lmao that sound is wild. I have two K2 Plus with CFS and neither makes a sound REMOTELY similar to that 😂
One of my K2 Plus units has been amazeballs and the other had issues out of the box. Creality has sent at least $200 in parts and its back up and running. Their support was honestly great and offered to send OTHER parts that *could* be the problem just to expedite the chance of getting it back up and running
Just a quick heads up here from my print farm. I have the new Cryo Grip plate and after only a week the machine did an auto bed level check before running the next print and drove the nozzle down into the plate and skidded across the plate with a deep gouge making it junk now. I've heard there is a problem detecting these new cold plates etc...yeah...there is trouble.
That CFS is like a screaming chicken
Thats both hilarious and infuriating
Haha! I’m sure it is an easy fix or replacement!
omg this is hilarious
That's not normal.
Mine is perfectly quiet.
Holy moly, this is the sound of an angry machine ghost🫵
Pray to the omnissiah to fix it
I have a K2 plus, and I'm having an awesome experience with my machine, I haven't had any issues with it! It's thumbs 👍🏻 for me!!
Awesome! My machine has been great too, save for that loud slot 2!
👍🏻👍🏻💯💯
@@jamesoromo340
My K2 has been rock solid!
I'm pretty sure slot 2 is a husky not getting what it wants.
That whining! 😆
the cfs scared the sh** out of me, it was almost midnight when i heard it and i thought it was behind me
Haha
😂😂😂😂
Bro same I did not expect that lmao
I know you’re having a hard time, but this video was hilarious. Sorry for your frustration, but thanks for the video. 😂
Loyal, that is my go to filming shirt!! Thanks for sharing your frustrations. The side many never share!
Thanks! We all have these days in this hobby!
Oh man.... that noise from the CFS would drive me insane, and I wouldn't be able to print with it. It's not normal, especially since it's only happening on one slot. Nice to know that the Vision Miner Polymer did it's job. But that really sucks about the warping and it popping the bed up.
it was just a culmination of so many single issues all one after another and even at the same time! Talk about a frustrating weekend, lots of wasted filming too!
Not to enjoy your troubles but it is nice to know you have problems like myself. I enjoy your videos and what you do. Thank you for the insight with what you do in the studio.
I totally get it! That’s why I shared this, it can be maddening or depressing when we have these failures!
I'm just waiting on the new larger Bambu Lab to go with my X1C.
Heck yeah!
Meeeee Toooooooooo
Better talk to the bank for loan for larger Bambu 300+mm.
I owned a Qidi tech X Plus 3. I hated that thing. I then got an X1C. I really want a larger print bed, but I'll wait for Bambu. I can't for them to release it!. I will be getting it.
With BL's new firmware rollout, not sure if I want to go with them. I heard it was not well received. Besides, I have had 0 issues with my K2. Guess I've been lucky so far.
i thought i had a bed adhesion issue figured out on my printer. had 2 successful tests with the same file but only partially printed. could not for the life of me get it to print again when i went full send. discontinued that model for sale for now cause i just don't have the time to modify it or figure out which exact profile setting to change.
Isn’t that interesting how one model’s geometry can cause us so much grief!
The first time the CFS screamed I wasn't paying attention to the warning... and I seriously thought someone was being murd*red.. then I saw your facial expression and I got the gist of it😂
Hahaha!
legit my chickens go like that CFS every morning before feeding time 🤣
on a serious note thank you for the vid, i'm willing to take a k2 and i'm considering every feedback i find here on YT
Haha! The K2 so far is producing great prints, so much fun having a giant machine that is multicolor.
Wow! There's no way I could put up with that CFS scream! I'm amazed you didn't stop the print, I would have.
So you got all the failures out of the way early in the year. Smooth sailing from now on.🤞
The K2 Plus does look very tempting (a quiet one at least) Cheers!
Hopefully got them all out of the way for the whole year! Smooth sailing from here on out! 😅
Good vid. Have had all those issues over the years. If you know a part wants to warp and you need to use an adhesive to keep it stuck, clip at least the 4 corners of your build plate with strong metal clips.
Thanks! Before I started the print the 3rd time... I was so tempted to grab a few clamps and lock it down...
@@LoyalMoses you need higher chamber temperature... the large print covers too much of the heated bed, the bed does not need to be heated that much and so the chamber is getting too cold and the warping starts... you can try to mount a fan under the heated bed (pointing upwards) so more heat is transfered to the air in the chamber (works best without bed isolation).
i really ennjoy the content that actually represent how printing goes lol. the last few days, my printers have not been cooperating.
Thanks! We all have these same issues!
What light do you use for your 3D printer?
That CFS sounds like it's screaming in pain! Why am I not surprised?😐
So freaking loud! It’s just slot 2, but oh my gosh!
You only need to add a bit of machine oil to it
you should not need to @lucafortini-rn3gw
Omgeee! I thought something was happening in the living room… wow! that scared me! Haha!
Haha
HA, nice to learn I'm not the only one with bad print days. Always learning something new with this hobby.
It’s an amazing hobby!
That sound the CFS made sounded like a banshee wail! Seriously thought someone was screaming in pain 🤣 - I have a Neptune 4 Max and to say that its been a smooth experience would be lying. My K1C has had some failures but it is mostly reliable, my A1 mini is the little printer that could, but the N4 Max has nearly found itself thrown out the window so many times that I'm finding myself creating completely new parts for it and ideas from Prusa and Sovol printers that I've nicknamed the modified version the Neptune SV04ks Max
😅 3D printing is amazing and also the most frustrating thing in the known universe!
@@LoyalMoses speaking of frustrating, Creality just went ahead and repeated history and released a full-blown A1 knockoff
I saw that! 😳
@@AllieT-wq8eq LMFAOO. I read your comment and thought you were joking... ITS INSANE HOW MUCH THEY'RE TRYING TO COMPETE LOLLLLL
Loved the thought balloon about the CFS...
Haha!
Good luck. Yes, we have had print issues, your cousin made me 2 different Sorcerer Mickey on the Bambu A1 mini and they both have issues. Ken says it's the file that's the problem, not the printer. So I have been using Plastic Wood to fill in those areas and going to paint them.
It can definitely be the file and slice sometimes for sure!
I've had few problems with slot 4. I have a small vid where the filament just won't move .
Oh no! We need to get these fixed!
That screaming is insane, lol!
My brain hurt from hearing it for days!
I think it's important to capture days like this because they absolutely happen, and people getting into printing need to know its a thing that happens, but it's not insurmountable. My least favorite was trying to make an Orcaslicer profile for the Kywoo Tycoon because enough people had been asking, being new enough to Orca that I didn't triple check acceleration before printing, and toasting a stepper driver. The drivers are soldered in so it's a whole board replacement to fix, the main page didn't have them in stock, could order from France or get the board it was cloned off of, and even with that the board is stuck in such a weird place it fequires a crazy amount of disassembly to get at. I had the Magneto X coming, so I just boxed it up for the day I feel like going through all that headache.
I have the Anycubic Kobra 3 Combo. I got it just before Thanksgiving. In the time I have had it, it has been down 75% of the time. Anycubic has been great sending me the parts, but it takes two weeks to get the part only to find out there is another issue. To say it is still frustrating is an understatement. I have replaced the Motherboard, print head cable, hotend, camera and now they are sending me a new print head and fan for the power supply because it sounds like a jet engine starting up. Oh, and as of last night, the AMS is throwing a code saying there is a clog. I have taken everything apart and verified there is no clog. So I can feel your pain and frustration. Yes that sound your machine is making, does and would drive me insane. I am about to go Office Space on my printer if it doesn't start working like it should. When it is working, I love the prints I have made. But I am addicted to this 3D printing.
from what ive seen cfs are louder then ams but I don't think they should be that loud.
Yeah, the other slots are quiet, can’t hear them in the video at all. The printer is overall very quiet too. Slot 2 is testing me! 😅
I recently had a print come detached from the bed. I’m use to finding a mess of spaghetti but not this time. It was a tallish cylinder and it stuck to the nozzle and was scooting around the bed. This caused the pla to create a giant blob that inflated the silicone sock and pushed plastic all the way up to the cooling fan stopping it so heat creep could add to the party. I went in to check it and was amazed the little Ender’s extruder was still feeding that creation. The only thing I was not able to save was the fan. It had enough pressure applied it was missing a blade. Blade was pressed against the heatsink. I regret not it taking pictures of it but at the time was focused on getting the printer up and finishing the planned prints for the day.
Yikes! The blob of death! Sorry to hear this.
The sound the CFS is making would have been great for a Halloween decoration sound effect.
Haha
man that sound i thought you had some farm animal in the house haha.. and havnet had to many printing issues. though today my ender 3 v3 is not wanting to stick on one part of the bed. thought it was the filament and nope switched it out and did the same. so just cleaned it letting it air dry and applying that vision minor again and see what happens. Also set up my anycubic kobra 3 combo and it has been awsome so far. oh and waiting on that sweet a1 mini i won the other day stream yall did. talk about going from no printers to now gonna be 3 plus. Goonies for the win hahaha
Haha! It is so loud! The printer has been great though, just that pesky slot 2!
You are basically gonna have a print farm!
@@LoyalMoses yeah thats what i was thinking haha.. now to get some orders and find a good niche.. got an idea of why slot 2 sounds like it needs some major oil haha?
I am going to try and open it up today just to look! I am sure that Creality will send me another one just so I can have a good system to film with, but I still would like to know why.
@@LoyalMoses makes since. im sure they will send you a whole new unit. but yeah get in there and see whats up. i man expecially if you wasnt a content guy and homeowner who bought they may have you open it up and replace parts they would send.
Ya, mine sounds like a table being dragged across a floor. Cats hate it. Definitely no overnight printing for me.
Contact support through their app, it’s not normal and they will get that taken care of. It should be super quiet like the other slots.
I'm really excited for the thinker s400. I am interested for how much the printer is.
Soon! 💜
It sounds like the CFS is having problems with the first stage feeder. Likely, plastic has grinded itself in the feeder. It could also be the spool is too light. When retracting, it could be too light thus making nasty sounds. Sometimes adding a weighted core to your spool helps with AMS designs. I would still contact Creatlity for a replacement part or unit. Everyone has these days my man. Just get the maintenance done when you’re ready and you will be off printing again with no problems.
I’m going to dig in later, it’s not a simple issue, something is definitely not right.
Lol more than bad days. I had rough months with printing issues but figured it out.
Oof! Bad months is rough!
I've had problems like what you're having with ironing but on an old-school Creality Ender 3 Pro. I was trying to print a Super Mario Bullet Bill wall hanger with ironing and it kept going wrong EXACTLY like what seems to be happening to you.
It can be so frustrating!
Maybe it's me, but every time I try ironing, it looks like crap. What's the secret. My K1 Max or A1 both do it.
It should work great with default settings ONLY if there is absolutely no warping. Even the slightest of lift from the build plate, even if you can’t easily see the lifting, will cause ironing to look bad.
I have some other NES cartridge content here on the channel, and the ironing was perfection!
@LoyalMoses Thanks for the reply. I just don't like how it looks. I thought it was supposed to smooth out the surface. Tried with my ASA and PLAs. I've only been printing for 2 years, though, too.
It should look perfectly smooth, almost impossible to see the surface pattern.
@LoyalMoses Thanks. I'll keep testing. I usually looks like it's just scraping it. Looks better if I don't use it.
Dude I am so glad others are coming out about these issues, we have been through 2 warpped beds and 3 extruders. And our CFS screams as well....lol. This printer will need a lot of modifications. Should of waited for the Bambu release.
In the video I said that my printer is printing perfectly, not a single problem - just the loud CFS slot 2, which they've already acknowledged and are sending the replacement. I haven't experienced anything bad at all, and I make it a point to not worry about the problems that other people experience, just share my own,
Yea the K1 max is loud and shakes a lot too
Everything shakes nowadays!
That is more annoying than a standard ender 5 plus that sounds like someone murdering a droid. Perhaps you should run both side by side and get a duet going 😂
Ahhh, now I understand how Creality saves money!!! Rather than electric motors they use lemmings in their CFS…. Looks like that little guy has a leg stuck in the gears…
Hehe
Honestly fhe CFS screaming i thought was either chickens or really strong wind. That is wild.
😆
Good luck! And yes we all have "those" days. 😁
Thanks! Frustrating days for sure!
Omg, That sound would drive me insane. Is it a bad bearing or something.
Creality just released creality print 6 this week, it's supposed to be better. I haven't updated it yet myself though.
Yes, insane!
Sorry for your troubles with these machines. You made my decision as far as what 2 machines to cross off my list ! Thanjs for that anyways. 😅
What machines are you looking at?
@LoyalMoses well just ordered the Kobra S1 combo at 519. No was just saying the 2 you talked about were off list now.
Gotcha! I’m excited to see that machine in action!
that giant NES cart looks great. would love to see a 1.2mm nozzle on the creality
Screaming isn't normal, lol. My K2 works great but Creality needs to improve their filament flushing, particularly between white and black. Even with the latest firmware there's banding.
I thought someone was screaming! That is crazy loud. I am really interested in that Thinker X400. Hope you can get it up and running I really want to see more of it. Sucks you’re having “one of those days”. Been there done that.
I want the X400 to work out so much! Let’s hope!
😂🤣 your cfs screaming for help
It wants me to put it down! 😅
I seriously thought LM got chicken to the studio when the CFS sound started :D
😆
I feel the pain lol, remember the Qidi plus 4? That kept me busy for way to long. BTW like the XL version of the card
Thanks!!!
Perfect prints are not as common as one would think. LOL I've had those days and or weeks.
Love to see all those transformers(Starscream, Thrust, amd G1 Jetfire/Skyfire) around you. Not to mention one of my favorite Gundams Heavyarms
Love this stuff!
Is the filament roll in port 2 made from something other than the ones in 1, 3 and 4? Carboard vs Plastic or something? Is the noise coming from rubbing or the gears? If it's from rubbing try using a thin adhesive felt strip on the top pressure plate. Also use Orca Slicer, they have K2 Plus profiles now and works much better than Creality Print 6.
It is the servo in slot 2, I haven’t pulled it apart yet.
I have a helmet sliced up in Orca too for it.
I have none of those issues. I have nothing but a great working machine (The CFS doesn't sound like that for me). You definitely got a lemon. Sorry to hear that bud. Love your videos.
Happy to hear that! It’s okay, we’ll get mine fixed up and be good as new! The machine has been awesome so far.
Hello, as soon as I saw that you already have K2plus, I couldn't miss the opportunity to ask what you use to prepare files. Do you use orca or creality slicer and did you manage to connect k2plus with orca.
The #2 slot on my cfs is also making alot of noise. It also has over retracted and made a spagetti monster in the cfs a few times
is creality sending you the new multi color bed slinger?
I assume so!
@@LoyalMoses hope so, I got the email and was excited, then I remembered why my S1 Pro sits and collects dust most days While my bambu's and elegoo 3 pro(not 4 pro that thing was rough) do the work.
My P1P's XY belts squeak and it drives me crazy.
Seriously! It’s those random squeaks and whines that make my brain go crazy!
Creality k2 printer is quiet while printing, unlike bambu. Besides that mmu unit
For the most part, all of these new machines are pretty quiet when working properly. Bambu has the quietest machine, the A1
Sometimes the files we print are more sensitive to the settings as I have found out. Hope all is good in your neck of the woods and look forward to that future review. Ty sir!
Thanks!
Thats very unfortunate about your k2 plus i have had flawless prints and have had no errors or any issues besides small retraction errors which is nothing
The k2 is awesome! Just that dang slot 2 in the CFS! Happy that you love it!
@ LoyalMoses it really is an amazing printer i have a k1 max and had continuous issues with mine but i decided to preorder the k2 plus at 50% off and just recieved it a couple weeks ago and have used it more than my 2 p1s combos and a1 combo lol.@@LoyalMoses
@2:25 Creality literally told me thats normal..
Dang
Is your printer working tho😊
I am so glad I did not get a k2 plus. I was so on the fence. I got 2 p1s combos instead and they’ve been amazing so far.
P1S is an amazing machine, k2 plus is really good too, helmets in multicolor is just sick!!!
@@LoyalMosesThis is completely opposite of what you say in the video lol. What are you saying?
Very clear in the video, the K2 produces great results, and the P1S is one of the best machines on the market. Slot 2 on the CFS is broken, which happens - I am a realist, even my $90k truck arrived with a damaged moonroof, this stuff just happens and really isn't that big of a deal. As for the P1S, the orientation of the model, my choice of infill and attempts to use ironing when PLA was warping was the issue. It's really not that difficult to understand.
cheer up buttercup! a nice perfect first layer'll cure ya
Exactly!
Did you use CP6.0? I been having warping issues i never had before i tuned it over weekend but just not fleshed out way i had it in CP 5.whatever 😂
Cp 6.0 is basically temu version of bambu slicer😂😂 7:30 also heard that several times about standard purging values not enough on few groups im in
That CFS is for sure haunted
So sorry you've been having so many issues 😢 that's so frustrating
Haunted! Imagine if this was at Halloween time?! 😆
my Ender 3 worked fine until i changed to Creatily black then it lost all it settings .....
🤔
Careful with the temp and speed for that pillowing. Lowering temp can do wonders for that.
I ended up just increasing infill to give it some support under those top surface layers.
I feel your pain. I just completed 49.5 hrs of a 50 hr print. The very last piece keeps taking the spaghetti route. It's a very small piece which takes 30 minutes to print. And this is on a X1 carbon.
Dang!
6:10, I'm sorry man, I was laughing my ass off. I hate that was so funny dude. You get a sub, comment and thumb for it though.
Haha! I totally get it! Welcome in! 😆
I actually thought those were chickens at first lol. FYI…definitely not normal but you know that already. Not normal to want to murder your CFS. 😂
So is that screaming sound going to be a new twitch point redemption sound?
Haha! Heck no!
all sounds like a maintenance issue. check gears. lube stuff. clean and lube rods. check belts ect ect
Creality saw the video, and said it was a manufacturing problem and they shipped a replacement,
@@LoyalMoses yeah that thing. but the rest souns like you dont understand the machines you operate while giving tips how to use them. it is just my opinion. i can be wrong i just watched some videos of you and that is the feeling i got. but dont think i think i am wright on this you know best offcourse. so do not let 1 viewer get to you. i just go over to other creators and get my tips there.
Creality Print is so buggy. I have a high end gaming rig and it bogs down my desktop so bad.
Oh dang!
You should market that screech as a Ring Tone.
Haha! Nightmare ringtone!
I don't ever have 3d printing mishaps because I employ the use of my beard powers to ensure all prints stick properly. My beard powers are too powerful
Wow! That’s impressive!
I thought Mrs LM was screaming at first, then i thought someone was screaming in pain! That would terrify me if i woke up to that in the middle of the night.
Did you get a picture of the build plate wrapped around the print? That's just proof, to me, of how good Vision Miner NPA is. I got a little too excited to take a large print off my A1 Mini and didn't let it cool. The NPA worked so well, my printer came off the table a few inches when I grabbed the print to take it off.
The whole house has hated slot 2 on that thing! 😆
OMG, that sound, if I was a foley artist that would be awesome for some horror flick.
Haha
Creality death whistle😂
it's creality what did you really expect ??? i made people bought lot of cr10, ender 3 ender 5... worked well for one year and after that the hotends were needed to be replaced if you want to keep printing correlcty.... the cheap comes at a price.
This may have been more true many years ago, but there is a significant difference in machines now vs then. In another comment or two, I mentioned how I ordered a custom $90,000 truck -- it had problems when it arrived. This happens with every brand in every industry.
What we are seeing is massive improvements across the board with every brand, our expectations are increasing as consumers and these companies are trying to meet them as quick as they can. This makes me hopeful that we will just get better and better 3D printers.
@LoyalMoses yeah but we are talking about the brand that make the k1... Which fixed it's bugs design flaws etc by selling a new version.
They did the same for their scanners. My lizard never reached what creality promised. And they advertises the next one as the one that can scan dark parts... Which was what the lizards suppose to do but never did.
My Ender 3 printed since 2017.
Stop telling nonsense, brass nozzle need to be replaced on every machine, it's part of the maintenance.
GL AND GODBLESS!!!!
Thank you!
1-Ups on Bambu Lab are totally not worth it. It's almost like every other company is cursed.
Your CFS - I haven't laughed so hard in a while ....
😆
I feel for you! I have seen that same exact facial expression every once in awhile when Murphy decides to ruin my day. I think you may need to add a live blood pressure monitor and a big fat red Easy button! Anytime stuff goes wrong it usually does so in a cascading chain of events. The up side, there are many more days where everything just runs completely rosy. Hope all is back to normal! What printer caused the failures to all the large panels, the K2? I have never been a fan of Creality software. I had a whole day of this about ten days back where things just went downhill fast while working on a very large 1.3M RC plane.
The failures on the small parts were all on Bambu machines, really just slicing issues. The giant one was on the unreleased Eryone X400.
Ohhhhhh nooooooo i hope Bambu comes out with a bigger machine i couldn't handle the screech of that creality ams
They’ve already shipped the new one! And yes, we all want to see what Bambu is gonna release!
Got that Aztec death whistle going on in the background.
Haha
Just heard Creality release CFS conversion kit for E3V3 and I want to order one to try it out.
but if it gonna scream at me like that every time I print, I don’t think i want it Anymore 😂
I’ll stick to my Bambu’s AMS.
I would like to play with that new Creality Hi!
@ I’ll wait for you upcoming review if you’ll do one 👍
Haha my cat is freaking out
LOL! Sorry!
I'm sorry for what happened, but thanks for showing that it is just not me.
Thanks! We all suffer from this, and sometimes it happens all at once! 😳
The CFS doesn't have 333 bits on Twitch. So it is just saying "Notice me Senpai!" the only way it knows how. Credit for that joke goes to MooseVree!
Haha!
1:48 are you sure you didnt accidentilly drill into the bottomless pit?
Haha
It roars like a tiny Tie Fighter.
Haha
Nice looking NES carts!
ok I was maybe to fast to comment lol, that sucks sounds like a frustrating week, I see the promise in the NES carts though, they'll look awesome when completed.
Thanks!!!
You need to bless that printer 😅
try using grease or wd40 PTFE sound like it the bearing issue needs tender loving care
I will find out!
Sounds like R2D2 getting tortured...
🤣
When did Creality include a screaming goat with every purchase? 😂 I have no problems wiyh creality but thats funny. Hope that gets fixed soon!
I’m sure they’ll get me squared away!
Lube the bearings on the roller :-)
Wouldn’t that be awesome if it was that simple…