How to Wire an LED Light Bar Properly. Cara wiring LED light bar.

How to install LED light bar on a car.
The light bar comes with stainless steel screws on the top body to ensure a
waterproof seal.
Aluminum body build made with heat sinks fins for quick heat dissipation.
It came with 2 Mounting Brackets and a Screws Set.
Buy a wiring harness kit which uses a simple plug-n-play design meaning all the hard work is already done and you don’t need to spend hours wiring.
A simple and easy to use wiring harness kit.
Make wiring up LED light bar fuss free and relatively inexpensive.
With the right tools and supplies, installation is painless.
LED Light bars can illuminate an area so much more effectively than any other form of auto lighting due to the spread and brightness.
It also do not consume a lot of energy.
Produce very little heat and thus consuming less electricity meaning less drain on your car battery compared to halogens that produce a lot of heat.
This is how i done it.
And it's works for me very well.
So, let's get started.
Tools used in this installation
Super Slim LED Light bar - invl.io/clfm05t
LED light bar harness kit - invl.io/clfm068
Cable Tie - invl.io/clfm06l
Ratchet with sockets - invl.io/clfm06z
Electrical Tape - invl.io/clfm07i
Wire Cutters - invl.io/clfm07u
Pliers - invl.io/clfm089
Screw driver - invl.io/clfm08o
Cordless Drill - invl.io/clfm091
Grindstone Grinding Bits - invl.io/clfm09v
0:00:00​ - Intro
0:00:08 - Disclaimer
0:00:30 - Test LED light bar off
0:00:36 - Test LED light bar on
0:01:05 - 22 inch Super Slim LED light bar
0:01:10 - Stainless steel screws on the top body / waterproof seal
0:01:21 - Aluminum body build made with heat sinks quick heat dissipation
0:01:29 - Solid water tight cable
0:01:29 - 2 Mounting Brackets and a Screws Set
0:01:40 - Wiring Harness Kit
0:02:10 - Tool's need to install the LED light bar
0:02:10 - How to install the wiring harness kit
0:02:30 - Pass the switch cable through the firewall
0:02:44 - Routed along wiring harness head lamp
0:02:52 - Through the front of the radiator
0:03:02 - Connect red fuse to positive terminal battery
0:03:02 - Attach the negative wire to the body
0:03:12 - Test switch on the LED light bar
0:03:58 - Disconnect negative terminal battery
0:04:12 - Find a suitable mounting location for LED light bar
0:04:24 - Remove the grill
0:05:20 - Mount the LED light bar
0:07:45 - Mount the relay
0:08:07 - Route the wiring harness kit
0:08:31 - Using a metal wire to route the wire under the fender
0:08:51 - More grip the wire
0:09:36 - Remove the panel under the dashboard
0:09:48 - Wire go through rubber seal
0:10:10 - On/Off switch location
0:12:13 - Run the wire harness behind head lamp
0:12:53 - Connect the LED ligt bar wire
0:14:22 - Zip tie all the wire harness
0:15:01 - Install the battery
0:16:34 - LED light bar test drive
Wiring must be routed away from high-temperature equipment and lines to prevent deterioration of insulation.
Cable tie the wiring harness in the car and make sure wiring harness in the safest place and away from high temperature spot.
But the most important thing is: they let you do more while staying safe and in control. Whether you are a weekend warrior exploring beyond where the road ends, or you need the extra illumination to make sure you can do your job the right way, LED light bars are right for you.
Remember to use the correct lights for on-road, high-traffic driving. The importance of being situationally aware of your surroundings cannot be stressed enough.
Use this information at your own risk. Any injury, damage, or loss that may result from improper use of any tools and equipment, or from the information contained in this video, the user must take responsibility.
If you think this video helpfull for you, remember to give it a "thumbs up" and "subscribe" my channel..
subscribe : bit.ly/2JgWWAc