BIQU B1 - 3D Printer - Unbox & Setup
Вставка
- Опубліковано 28 гру 2024
- Amazon Links
Buy it here: geni.us/qGtWGS
Official: bit.ly/3gNEh9W
Recommended: geni.us/JustVlads
BIQU B1 3D Printer TFT35 V3.0 Touch Screen SKR V1.4 32 Bit Dual Operation System DIY I3 3D Printer
Technical Specifications:
Technology: FDM
Print size ( X Y Z ) 235*235*270mm
Print Speed: 60-100mm/s
Layer Resolution: 0.1-0.3mm
Filament Diameter: 1.75mm
Nozzle Diameter: 0.4 mm
Filament Compatibility: PLA ,ABS, PETG,TPU etc.
Chassis Spring Steel Metal Sheet
Software Specifications
3D Printing Software: repetier-host, CURA, Simplify3D
Supported File Formats: STL,G-Code,AMF,OBJ
Operating System: Win/mac/linux
Temperature Specifications
Extruder Temperature: 260 deg C
Heating Bed Temperature: 100 deg C
Power Requirements: 100 - 120V / 200 - 240V 50 / 60 HZ Output Voltage - 24V Rated Power - 270W
Connectivity (Interface) USB or SD Card or Type C data cable
Electronics Specifications
Display: BTT TFT35 V3.0
Machine weight: 8 Kg
Shipping box weight: 9 Kg
Machine Dimensions: 412*492*402 mm
Shipping box dimensions: 530 x 410 x 180 mm
As an Amazon Associate I earn from qualifying purchases
My website: www.justvlads....
New Channel: www.youtube.com/@Just_Print
You are the most consistently good and unbiased reviewer in the 3d printing world, thanks for your work!
Thanks god you uploaded this video I would be so lost without it
is it normal that the plate becomes hot?
Just bought one ! This is the best review ive seen on UA-cam. I couldn’t decided which enter-level printer I should buy. After watching this review, I immediately ordered one .And it runs great!
Just built this printer with this video. Appreciate you going over all the steps.
Hi I bought the Biqu B1 and your video convinced me first to buy and then helped me to setup everything. Thumbs up!!!
The absolute best review I've ever watched - And let me tell you, I've watch a few. Bravo!
Thank you SOOOO MUCH for this. I bought this printer (seems to be a newer model but same name) and it was a bit tricky for first time setup. Got it running now and I am testing prints. Had no idea how to do anything and you've been wonderful help.
The manual was a bit tricky but got it working through your video! TYSM
I used your video instead of the brand instructions to unbox and assembly. Flawless guide!
Choosing this one over the ender 3 v2 for sure now
Best tutorial in the assembly and operation of the Biquini B1. The Z axis fix saved me a lot of time and frustration.
First of all, you are *an excellent reviewer JV*
Certainly one of the best on YT, I have to say. I really enjoy a lot all your unboxing and tests. So, a huge *CONGRATS* for you, JV.
And definitely it would be great to have an honest and in deep comparison with the Creality CR-6 SE, if it is comming from you.
I'll be waiting for that !.
Many greetings from South America, Santiago de Chile. This is John.
Had elite TV drift car
Outstanding resource for BIQU B1 assembly. I would not have succeeded based on the included instructions alone. Your explanations and videography provided the extra help I needed. Thanks much!
Loved the review. Just recieved my B1 and they have changed the packaging and now it’s only 5 steps before calibration steps. Really easy to install
13:40 The lead screw should go in first and then align the screws with the flat side of the motor rod
Very informative video. I was considering Ender 3 V2 for my first purchase but now after watching this, I'm gonna buy B1 instead.
Getting "No Printer attached!" Error. Any idea how to fix it?
your a life saver, because of you i managed to find my problem thank you!! ♥
Thank you so much for the assembly help! I really appreciated it, just got one yesterday :)
Can I ask you if you could share your Cura profile? I got a printer but it didn't have the profile on card.
If you want I can share the profile that I use for PrusaSlicer.I add there PLA/PETG/PP/TPU. But before that you relay need to calibrate the printer. Here is a good startup:teachingtechyt.github.io/calibration.html#pid
I was stuck on two parts that I finally succeeded to fix, but I discovered your video after which gives all solutions I wanted lol Murphy law !
This one pretty much perfected the Ender 3 style printer.
Theres nothing you can add, sure you can use more expensive steppers
(and add a x axis tensioner why didnt they add that)
This machine is the final ender 3 evolution (without just throwing more expensive hardware at it)
Love the video. I bought one with the BLTouch ABL, but I am having problems setting up the ABL. Could you do a video showing the the steps needed to install and configure the ABL. Thanks!!!
Did you solve your bltouch issue? Here's a video maybe can help you
ua-cam.com/video/EWyQc_Ja3PA/v-deo.html
The benchy model that i have in front of me right now shows no gap in that square... in the PREVIEW mode at least.
Wow That is the best I have seen in a review!!! going to have to get me one for sure!!!
i'm getting a black one for Xmas! Cant wait =D
hey Vlad, nice vid :) ; just a question i just recieved this printer, but iam having some truble with running the mashine ... i have noticed that blured red sentense at 32:56 mark, no printer attached, how did you manage to fix it ? seems to be wires, because axis are not working, thanks for response
Hi Just, one question I review lot of video on 3D Printer setup. Why the builder all never use threadlocker (e.g loctite 243) on the screws. I thought 3D have lot of movement and all those factory screw doesn't coat with threadlocker?????
someone can confirm if in 11:25 the z axis it's touching the base or there is a little space between te axis and the base?
Can you please make video of how you use Cura? With settings and setup for this printer. Thank you (:
I really enjoyed your video! I just purchased this printer myself and now I am ready to set it up. Thank you for the great information! 👍
Thanks for this beautiful review. Will you tell us where to find the 3D printing model files you where using? I'd like to print them for comparison :-) Greetings from Northern Germany
I really like your review. I bought a Geeetech A20M with a 3D Touch bed leveler. I have been out of 3d printing for a couple of years so had a learning curve. After buying the A20M I realized I had to flash the firmware. I was very disappointed with everything I had to do to get it up and running. Maybe you can do a video on installing an auto bed leveler on this printer. Again thanks for the attention to detail in the video. I saw somewhere the open plugs on the back of the base were for power for a 3D touch.
All I can say is WOW
I'm a little late to this game. Just got a Biqu B1 and so far I love it! Question...where can I get the spaceman model? Thanks for being my favorite 3D printer reviewer.
www.thingiverse.com/thing:5205297
@@JustVlads Thank you!
No, that gap is supposed to be there in the backend of the Benchie, so you were right about the precision part. But also it's the same type of quality that the revamped edition of the TRONXY XY-2 PRO has right out of the box and I think it has to do with the magic juice from the TMC2225 Stepper Drivers because it has been nothing but [op notch quality from a entry $200 dollar printer and I love it so much, it's become my favorite and also the foundation for my new CORE-XY Variant and I'm just about finished with it, when I came across this review. I was astounded just as you are here 😆 but have fun and stay safe!
My tronxy was 180 American dollars
Hi, in minute 48:40 you said all the layers are printed in 0.6mm layer height. I guess, you wanted to say 0.06mm, or did you mean 0.16mm layer height, as you mentioned in another review of a 3d printer? Because otherwise the frog would look like very abstract and not that smooth. Am I right? :-)
Anyways, thanks for this fantastic review, which made me buy this printer and I am happy with it right now. I love to print the spaceship, but have no idea where to find it in the internet :-)
Have a good day and greetings from Germany.
Yes, 0.16mm and the spaceship link: www.thingiverse.com/thing:1535483
The calibration cube you need to get calipers and measure it. it is supposed to be 20mm every side
The bed stays hot when paused? Or when it runs out of filamrnt?
Every single time u got to print u have to level it or can it level itself?
What spicer did you use, and what were your settings?
Are you planning on reviewing the Biqu BX or the Biqu B1 SE. They don't have enough of a showing and I'd love to hear your opinion on it
Where can I find a replacement boat holder?
Biqu B1 vs Anet ET4. which one you recommend more?
the motherboard cooling fan is really loud. I am looking for mods to help reduce that fan noise. Thoughts?
Can I calibrate the extrude using the display?
Hi, which slider and printer profile a you using to slice the model?
Just putting mine together right now and wiring harness is not labeled correctly. I have 2 marked X and none marked E. They are both same size plug. Hope I guess right!
Can I put a 0.2 nozzle on this printer? Cuz I haven't find any
Thanks for this review. Bout to snag my 1st 3D printer and I think this is gonna be it.
I just got this printer, and although the directions look really good, your set up video was great. I started printing before I finished your video, I also had the problem with it stopping mid print on the Pokémon file. Soni stopped the print and tried the bear and it printed just fine.
Also didn't follow directions very well lol. I went to install the little Z-stop bracket and realized I had the hole on the wrong side 🙄🤦♂️.
just got this printer for myself. is there a way to do mulicolor models or do i have to stick with 1 color?
I loved the color on the printer very looking cool color
After I updated the printer with latest firmware, the knob light does not work. The option to change its color under Feature settings is no longer there.
Just perfect instructions thanks a lot!!!
Where do you get the objects to print? Is there a place to purchase things to print. Is this machine Wi-Fi? Can I print from my cell phone?
Great review. Been looking to get my first printer.. this is still my top choice.
Better than ender 3 v2??
@@moommomo1100 Look at all the upgrades it has over the Ender 3 V2 that are already ON the printer. Let alone that Bl Touch is just a plug-and-play option. Looks very good. One can always still swap out the PSU for a Mean Well power unit.
Can we get one video for beginner 3d printers...i checked every single video. but im not sure what to take...for now creality is really good for the money and i would like to hear your opinion...you are great and thank you
Que configuración de Cura usan? Yo todavía no encuentro la adecuada
Will you review a prusa machine?
Thanks a ton for the review. Answered all my questions
This or a Longer LK5 pro I'm just getting into 3d printing
I'd like to put in another request for the model files. Thank you. Good review. I just received my B1 and used this to assemble it. So far it is working well.
your amazon link does not work.
Nothing a can of spray paint can't fix 😉
What's wrong with the color?
😂😂😂😂😂
Hi, your video helped me decide what printer to choose.... and not so suprisengly it was a biqu b2. So thanks! :D
Although I have some problems seting up the printer, what slicer do you use with this printer? What settings do you have? It would help me a lot to finish setting up the printer
Actually the knob is for use with marlin mode
ordered mine yesterday I can't wait.. are most mods for ender 3s compatible with this or are the dimensions for parts different? I am totally new so I don't know how different they are
Not only are you new. But apparently you don't know how to research either. I literally just started researching 3D printers 4 days ago and I already know the answer to your question.
This thing is built with all the upgrades you would end up putting on the ender. That's one of the main reasons people like it. It's been mentioned in almost every video I have watched.
How many hours before 1 item is created?
When I typed in the code ally printer says is M155 S3 and just repeats it over and over and over what does that mean
my printer has some stringing i have tried it upto 10mm but it still didnt fix it please help if can.
wow, unique machine
can you do an upgrade for the sidewinder x1? apparently theres a v4 id consider buying
Yes I have the sidewinder to
so question i keep getting printer not connected error even tho its connected
Every single review I've seen of this printer, the test benchy has a large seam in the same exact spot. Is this a slicer setting issue, a hardware issue? What do you think could be causing it?
Slicer related. It's a seam where the layers start/finish. Can be changed to have it at random places (less obvious, small "dots" might be visible etc.)
Awesome, enjoy your videos keep them coming.👍🇺🇸
What's weird is I got best quality prints with the sample filament. It was brittle, already broken in the bag in a few places, but still... best overhangs. Couldn't produce as good Bulbusar with different filament, and white PLA is supposed to be the hardest to print... well, for me it was the easiest.
Nice video! Thanks for going over all the details. What gold/silver filaments were you using on the frog and astronaut? They looked great!
Mine is different then yours.. it doesn't have fuses inside but it has a fuse by the plug in
Great explanation, I bought mine last month is a container ship now; should be getting it in October. Can’t wait to get. Are you going to make a video with 3D printed upgrades for this printer?
Hey Vlad, nice video, I just bought this printer last Monday and I'm waiting to arrive.
Do you remember is there was any white filament left after printing this pokemon and the bear ?
Looks like a good choice, nice quality, thanks!
Good bad or whatever, I just ordered from Amazon. $239USD and free Prime shipping. My very first 3D printer. guess we'll see how it goes!
Do you've your slicer profile to share?
On Thingiverse I searched for benchy and get too many results. Can you put links in comments to all 3 files?
My bearing won’t even turn idk how to fix it
Hi all :)
I cannot decide between this or the Artillery Genius.
Which one would you go for?
Quality wise they seem very similar.
This has a bigger volume and better board against the Titan extruder and Vulcan Hot End on the Genius.
I've also read that the Genius is limited with spool size?
Appreciate your input!
I really like the built quality of the artillery genius but in my opinion from what I've seen it's performance doesn't suit the asking price, biqu b1 has a better edge base on what I've seen and heard plus it's affordable, ive ordered the black edition
@@vexper974 Thank you :)
Wow nice tutorial, clear and entertaining, I was thinking of getting the ender v2 now I'm kinda thinking this would do just fine,what do u think? Hope u can give me some advice
You are probably gonna need to change the power supply on this, since it is just a generic one. The ender has bigger community support too (lots of tutorials, readily available upgrades, etc.)
sound like a pretty mature product... nice.
Could you share the slicer preset?
I‘d also be interested :-/
Thanks for helping me taking a decision. Really apreciate it. Still I will go for the black version.🤪
If someone is interested, here is my experience till now with this printer: www.reddit.com/r/BIGTREETECH/comments/jinf01/my_biqu_b1_usage_log/
Btw. I managed to print TPU and PP on this printer.
I just bought this from micro center for $149.99. SKU: 249631
Mfr Part#: CDY000058
Your video is excellent and so is the editing. Don't sweat the pink color thing - It's just a color and females don't own it.
This one is pretty slow. Does anyone know how to properly speed it up?
I bought this from your video and had a great 24 hours with it. This morning was printing, heard a spark and its now dead. I really liked it as my first 3d printer, should I just get it replaced or any other suggestions in similar price?
Wow quality control is bad ! did you get your money back ? I suggest you should go for Artillery or Sovol SV01 or Ender 3 V2 Very nice printer and similar price
@@AuroraCypher Why would you recommend the ender 3 when this one is better in every way? I would hardly suggest that as an alternative.
Edit: Why do you assume quality control is bad after reading one person's experience?
Do you have any idea how easy it is to change a power supply on these things?
Like taking a walk in the park.
@@dangerous8333 Because 5 months ago after I watched this video I went and check on other reviewers and they all said this printer is not that good many flaws and overall bad.
Did it have auto bedlevelling ??
What program do you slice in ??
Auto bed leveling is optional. Sliced with Cura Ender3 profile.
Y-Axis Home Not Working Correctly
Hi everyone,
I'm having an issue with my 3D printer where the Y-axis home is not working correctly. When I press the limit switch, it lights up green, but the motor doesn't stop. I'm using a BIQU-B1 3D printer, and I'm not sure what's causing the problem.
I've checked the wiring and configuration, and they both seem to be set up correctly. I also tried swapping the Y-axis motor with another motor that is known to be functioning correctly, but the problem still persists. I'm not seeing any error messages or other symptoms.
Does anyone have any suggestions on what could be causing this issue or any other troubleshooting steps I can take? Any help would be greatly appreciated.
Thank you!
Press the knob in for 3-5 seconds and you get classic marlin mode.
He is saying that on 54:23
Very nice machine and great explanation...Thank you so much
Waaaaay too many adds! I watch the video from start to end, no skipping and im rewarded with endless adds...
Ad blockers work great
@@zommy5re77 Why?
Use Brave or Vivaldi to watch the videos with no ads :)
Just download the video and see offline.. Thats what i do lmao
I am on android, but i do have ad block on my pc.
how can i turn off this machine?