I'm an art student recently learning 3D sculpting because of classes and I've been enjoying it a lot, but the classes are so hard to follow - I've been looking NONSTOP for a tutorial on eyelashes and eyebrows and you're the one that actually made it make sense!! You're my favourite go-to channel for 3D sculpting tutorials, your clothing tutorial really pulled through for me :) You're amazing! Love your videos!
I've watched this video and because of this video I can finally make realistic but easy eyebrows and eyelashes, I'm very grateful for that, if I may ask for another tutorial video, can you make a tutorial on how to make teeth and tongue on a character to be animated later
Thank you for this video, these are exactly what I wanted to learn. But on your question on what more do I want to learn I specifically want to learn is how to sculpt a body and pose it through rigfy or if that is even the fastest way possible and I know you did a video on hair but is there a faster way to sculpt hair than creating each strand manually? Thanks again for the wonderful videos!
Your tutorials are so on point! Thank you so much for sharing this information with us. Your hair tutorial was also really good - it was initially a bit intimidating to get into doing the hair, but after using your techniques it turned out to be pretty no-fuss and honestly really fun and satisfying. Thank you so, so much!
The third technique is pretty good actually. It's an easy way to create hair cards for eyebrows as well! You just make each curve to have a plane and then convert it into polygons. Thank for sharing.
Thank you so much! I was really struggling to think of how i could create this sort of look & had no idea where to start, I used the mask brush technique & it worked perfectly! :)
In reference to the 0:34, After I add activate snapping to face, and adding a shrink-wrap modifier, when I go into edit mode, the plane is shown hovering above the face, and not "wrapped" to the face like in your tutorial. How do I get the plane to "wrap" onto the face in Edit mode?
No, honestly, I've given up on Blender a lot and have moved to creating 3D artworks with AI programs like Stable Diffusion and Midjourney. What took 10 hours in Blender takes 10 seconds in MidJourney. @@centrealm-manlyscribe4202
How do you get the eyebrows properly wrap around the face with the snap tool? It just snaps the first vertices of the curve to the surface and everything else stays in place Edit: At 12:40, it seems you somehow have the eyebrows wrap properly onto the surface, but unfortunately that part is cut completely. Do you have to manually adjust the curves one by one? What if you have 100 of them?
Thank you so much for this great tutorial! I just modeled the character and came to the creation of hair, and it's ironic that I stopped at the eyebrows, because I don't like the result of the particle system in my particular case. But now, having also a graphics tablet, the method with Grease Pencil is ideal. I have even made a cube with beautiful eyebrows)) Thank you so much!
Wow, es wurden sogar gleich mehrere andere Fragen gleich mit gesolved. Thumbs Up. Ich wusste, dass ich bei dir bestimmt auf ein guten Tutorial in diesen bereich anstoßen werde!
Great tutorial! This is the definitive one for me. I had one problem though! At 12:43 I wasn't able to snap the eyebrow perfectly to the character as shown in the video, and I had to flatten out the extruded vertices manually in sculpt mode which was a pain in the ass that took half an hour. Any tips on that, miss Torkan? Thanks!
the easiest way is when you in draw mode , then into stroke placement select surface , offset ->0.001(the num doesnt matter just with a decent position ) , (Left side of the View) , and it doesnt need to snap anymore
if anyone can help me out I'm also having trouble with snapping the eyebrow to the character. when I press g I can only move the eyebrow? not sure how she got all the nurbs to attach to the brow only the nearest one of mine snapped and the rest are hanging straigh off light board
Because of videos like this I subscribed to your channel. I love your way of teaching. Thank you very much. I can't wait to see a video about hair cards :)
This is really smart that you use many techniques to do a single task .. these questions come up to Blender learners as they learn different things and tools, and they wonder how to do a certain task with different tools that they learned! .. you are summarizing this in your videos .. SMART ..
thank you for this video. I want to give a minor critique on your instructions. Your explanations are very quick and to the point which is good in a way but I had a hard time with it, as i'm still learning the blender interface. the thing that threw me was that with the curve approach you said to go to object properties, not object data properties and had to repeatedly rewind to figure out that's what you meant! :D might be something to edit, just thought I'd tell you. Other than that great information and thank you!
I was wondering, if you weren't using Quad Remesh to create the clothes, then how would you do it? Do you have a video about it? Or could you make a video about it please?
Hey there. I know of 2 other ways. One is retopo the body part then duplicate the faces and separate them. Then sculpt them to clothes. The other is make simple geometry and simulate it to clothes. Save the bake and start sculpting details. This is a marvellous designer kind of way. Hope that was useful.
Ok guys! Which method you use for creating eyebrows & eyelashes?!🤔 . 8 tips I wish I knew earlier! 🤦🏻♀️ watch here: ua-cam.com/video/CInne5e7fIU/v-deo.html
how about the following 1. making tutorial sculpting for anime characters. 2. making tutorial for character modeling 3. making tutorial for retopo or learning good topology thanks
I wanted to use 3 but there is no draw mode , 1 was impossible, I have the newest blender, maybe draw mode is somewhere else,but its not on the mode selection. saw something called texture paint but it didnt work when I was trying to use it.
*I need help really badly* My character(s) and eyelashes are two different objects. If I want to change the Character's eye, the eyelashes will be in a different position. How can I adjust the character's eyes and the eyelashes will follow?
guys, I made a new channel for my Tech videos. I'd love to have you there😍 check it out:👇
youtube.com/@aramtorkantech
I'm an art student recently learning 3D sculpting because of classes and I've been enjoying it a lot, but the classes are so hard to follow - I've been looking NONSTOP for a tutorial on eyelashes and eyebrows and you're the one that actually made it make sense!! You're my favourite go-to channel for 3D sculpting tutorials, your clothing tutorial really pulled through for me :) You're amazing! Love your videos!
I've watched this video and because of this video I can finally make realistic but easy eyebrows and eyelashes, I'm very grateful for that, if I may ask for another tutorial video, can you make a tutorial on how to make teeth and tongue on a character to be animated later
I agree, I so want one too!
how are you highlighting the whole path @8:20??? im new to blender and can't change the scale at the end
also how do you change all the path colours when done?
That grease pencil method really blew my mind
So glad!😇🌸
Thank you so much for the tips !! Very helpful !! 😀
Thank you for this video, these are exactly what I wanted to learn. But on your question on what more do I want to learn I specifically want to learn is how to sculpt a body and pose it through rigfy or if that is even the fastest way possible and I know you did a video on hair but is there a faster way to sculpt hair than creating each strand manually? Thanks again for the wonderful videos!
Your tutorials are so on point! Thank you so much for sharing this information with us. Your hair tutorial was also really good - it was initially a bit intimidating to get into doing the hair, but after using your techniques it turned out to be pretty no-fuss and honestly really fun and satisfying. Thank you so, so much!
The third technique is pretty good actually. It's an easy way to create hair cards for eyebrows as well! You just make each curve to have a plane and then convert it into polygons. Thank for sharing.
Could you expand on how to achieve this please ?
Absolutely the Best UA-cam video on this topic. Thanks! 👏🏾
Wow thanks for this tutorial 😍😍😍😍
1000 Gracias hermosa por tu aportación, son mu útiles.
Thank you so much! I was really struggling to think of how i could create this sort of look & had no idea where to start, I used the mask brush technique & it worked perfectly! :)
Very useful! I had no the idea grease pencil could be used like that. Thank you!
Very interesting! I'm definitely gonna try the last one!
Thank you! amazing tutorial, open up so many possibilities, LOVE the grease pencil option。
Glad it was helpful!👍😊
the way you explain is awesome and simple to understand...super thanks
THANK YOUU!!!! you make it easier, God Bless You
Thanks Baby!
I can't even tell you how wonderful you are. With you I am always learning more and more.
Thank you for real!
You are awesome!
In reference to the 0:34, After I add activate snapping to face, and adding a shrink-wrap modifier, when I go into edit mode, the plane is shown hovering above the face, and not "wrapped" to the face like in your tutorial. How do I get the plane to "wrap" onto the face in Edit mode?
I have exactly this problem!!! Any resolve? it must be a setting we are overlooking
No, honestly, I've given up on Blender a lot and have moved to creating 3D artworks with AI programs like Stable Diffusion and Midjourney. What took 10 hours in Blender takes 10 seconds in MidJourney. @@centrealm-manlyscribe4202
Brilliant thanks.
Another amazing tutorial.
The way you explain each step shows that you want us to learn.
And it's working :)
Thanks a lot 😊
Amazing ^^
How do you get the eyebrows properly wrap around the face with the snap tool? It just snaps the first vertices of the curve to the surface and everything else stays in place
Edit: At 12:40, it seems you somehow have the eyebrows wrap properly onto the surface, but unfortunately that part is cut completely. Do you have to manually adjust the curves one by one? What if you have 100 of them?
same!!! causing me big problems!
you can make the brushes snap to surface
Thank you so much for this great tutorial! I just modeled the character and came to the creation of hair, and it's ironic that I stopped at the eyebrows, because I don't like the result of the particle system in my particular case. But now, having also a graphics tablet, the method with Grease Pencil is ideal. I have even made a cube with beautiful eyebrows))
Thank you so much!
amazing technique
Thank you!😊🌸🌿
Another great video!!!
thanks, next is about doing the practice ^^
Thank you, your tutorials are amazing🤩🤩
Thanks! Glad to hear that😊👌🌸
Very nice 👌👍
Thank you
Awesome
Wow, es wurden sogar gleich mehrere andere Fragen gleich mit gesolved. Thumbs Up. Ich wusste, dass ich bei dir bestimmt auf ein guten Tutorial in diesen bereich anstoßen werde!
Great tutorial! This is the definitive one for me. I had one problem though! At 12:43 I wasn't able to snap the eyebrow perfectly to the character as shown in the video, and I had to flatten out the extruded vertices manually in sculpt mode which was a pain in the ass that took half an hour. Any tips on that, miss Torkan? Thanks!
you're welcome! I moved the vertices close to the face as much as possible and chose all of them and hit G to snap them🤔
the easiest way is when you in draw mode , then into stroke placement select surface , offset ->0.001(the num doesnt matter just with a decent position ) , (Left side of the View) , and it doesnt need to snap anymore
@@freyasharpay3668 Thank you, I also had issues with snapping and your comment really helped :)
Amazing video and worflow!!!
Thank you🌸🤗🌿
Wow! Actually it was cool and pretty simple tech. Thank you for sharing such tutorial:)
your techniques are great
Glad you like them!😊👍🌸🌿
Very useful. thanks
Thanks for sharing this amazing method!
super usefull tips as always!! thxs a lot!!
Thanks! You’re welcome😇🌸🌿
good job.
Thanks!😊🌸
Texturing tutorial using Substance Painter next please
muy buenos métodos, muchas gracias.
Thank you so much, amazing techniques :D
That was the best tutorial
2nd vid I watch in this channel...and I'm impressed. Thank you :p
Oh really glad you like them🤗🌸🌿
I just started using blender a few days ago long time zbrush and maya user and I was stocked to see you cover this also subbed thanks.
Awesome! Thank you! good luck😊🌸🌿
if anyone can help me out I'm also having trouble with snapping the eyebrow to the character. when I press g I can only move the eyebrow? not sure how she got all the nurbs to attach to the brow only the nearest one of mine snapped and the rest are hanging straigh off light board
nvm figured it out you have select snap to face project not snap to face
you have real skills
Because of videos like this I subscribed to your channel. I love your way of teaching. Thank you very much.
I can't wait to see a video about hair cards :)
Awesome, thank you!😊🌿🌸
❤😍
Fantastic tut as always. You r the best
Thank you so much😊🌸🌿
God, thanks for sharing this video. I started learning 3D and your videos are very motivating, very useful and interesting 🥰
nice
Nice, thank you
Thanks for the tip
Great tutorial, thank you!
Glad it was helpful!🌿😊🌸
Amazing, thankiu
Amazing tutorial, thank youu
thanks for sharing your knowledge .i love your videos and it helps me a lot 🥰
Happy to help!😊🌸
The final lashes scream DRAMA in a very high pitch 🤣
Very good tutorial, I'm creating a female head & this is just way too useful, thank you.
Amazing😍🤯🔥
Ever since I watched this video, when i see girls on tv all i can see are their eyelashes. It's really cool what you opened my eyes to.
Great as always 👍👍👌
Thank you so much 😊🌸🌿
😊🌿🌸
❤
Thank you so much for these tutorials! You're great at explaining, making it simple and straightforward!
👍👍👍👍
🌿😊🌸
I am so gonna save this
good luck😊🌿🌸
Awesome, Learned lot. Please make realistic hair and eyebrows too. Thank you😊🤍
😍
😊🌸🌿
where is quad remesher located?
Sheeeeeeeshh
Do you sell your models anywhere?
you're the best, Aram
This is really smart that you use many techniques to do a single task .. these questions come up to Blender learners as they learn different things and tools, and they wonder how to do a certain task with different tools that they learned! .. you are summarizing this in your videos .. SMART ..
glad they're helpful! thanks😊🌿🌸
@@AramTorkan 🌹❤
How to rotate curve point . time in 8:35
this character looks familiar. reminds me of maximum ride
Good evening, I'm from Ukraine, just a great lesson
thank you for this video. I want to give a minor critique on your instructions. Your explanations are very quick and to the point which is good in a way but I had a hard time with it, as i'm still learning the blender interface. the thing that threw me was that with the curve approach you said to go to object properties, not object data properties and had to repeatedly rewind to figure out that's what you meant! :D might be something to edit, just thought I'd tell you. Other than that great information and thank you!
thanks for your comment! glad you like it😊🌿🌸
14:26 you mirrored the selected eyelash set to make one for the opposite eye... but how?
Figured it out
I was wondering, if you weren't using Quad Remesh to create the clothes, then how would you do it? Do you have a video about it? Or could you make a video about it please?
Hey there. I know of 2 other ways. One is retopo the body part then duplicate the faces and separate them. Then sculpt them to clothes.
The other is make simple geometry and simulate it to clothes. Save the bake and start sculpting details. This is a marvellous designer kind of way.
Hope that was useful.
@@SAkil-eh3jl thank you so much, the second way sounds much better to me, I'll try it.
Thank you, this helps me a lot!
Glad it helped!😊🌸
Pleasee tutorial made white cotton glove
Sure😇🌸
@@AramTorkan Thank sis !!!
How do I turn on snap to face
Thx you for this video love from India 🇮🇳
Thanks! You’re welcome😇🌸🌿
Been using multirez and sadly I cannot use mask extract
How i cant bevel objek to circle
Lovely eyelashes!
The only problem is; animating them would be a nightmare.
can u please make frock plzz
Ok guys! Which method you use for creating eyebrows & eyelashes?!🤔
.
8 tips I wish I knew earlier! 🤦🏻♀️ watch here:
ua-cam.com/video/CInne5e7fIU/v-deo.html
Noce
thats nice.are you persion??
i really like the third method...never planned to do them that way but ....hmmmmmm
This is extremely super... 👍🔥👏💯✨
I discover your Channel and you doing good stuff, now i do good hair cut and eyebrow for my warrior dwarf :). Thanks a lot
HA exactly yesterday I use the second method, but I did don't like my eyebrows And eyelashes I did, thanks for you video, it is very helpful.
Glad it was helpful!😊🌸🌿
lol insane hacks with the ink brush.
how about the following
1. making tutorial sculpting for anime characters.
2. making tutorial for character modeling
3. making tutorial for retopo or learning good topology
thanks
thanks for these ideas! sure👍😊
I wanted to use 3 but there is no draw mode , 1 was impossible, I have the newest blender, maybe draw mode is somewhere else,but its not on the mode selection. saw something called texture paint but it didnt work when I was trying to use it.
Ost name please?
*I need help really badly*
My character(s) and eyelashes are two different objects.
If I want to change the Character's eye, the eyelashes will be in a different position.
How can I adjust the character's eyes and the eyelashes will follow?
Ways for boys hair sculpting video please
This is a much awaited topic and will easily get you lot of views like the girls one
for method 3 is anyone having a problem with the snap tool?
I wish it was not so fast because I just started I didn't understand anything
You're beautiful